Electrical and Electronics Commons^™

Application Of Compressive Sensing To Microwave Tomography, Rafael Gerardo Lopez

Open Access Theses & Dissertations

Microwave tomography(MT) allows the safe, non-intrusive examination of the internal structureof an object by irradiating it with microwave signals and measuring how they get attenuated and diffracted as they propagate through the object. Measurement of these signals is difficult and slow, it depends on the objectâ??s physical properties and the test setup used for this. MT is based on a scanning process that yields measurement data with unique characteristics that make it difficult to process using standard computational methods. As the number of measurements needed for an image with acceptable resolution increases, the complexity of processing all the data becomes …

Smart Motor Syringe System, Conard Chan, Jenny Chiao

Electrical Engineering

Syringe pumps are widely used in many research applications especially in the applications that need precise control. Today most medical research utilizes syringes to control the fluid being pumped to the experiment objects. In most cases microscopic or nano-scopic motion control is required to acquire optimal results, such application includes purification of DNA/RNA from contaminants[1]. The high precision required to control the syringe pump makes it difficult to perform manually. This paper focuses on the design of an intelligent syringe pump motor control system to achieve reliable and precise control for biomedical experiments. This project improves medical research quality with …

Design Of A 350 Kw Silicon Carbide Based 3-Phase Inverter With Ultra-Low Parasitic Inductance, Matthew Feurtado

Graduate Theses and Dissertations

The objective of this thesis is to present a design for a low parasitic inductance, high power density 3-phase inverter using silicon-carbide power modules for traction application in the electric vehicles with a power rating of 350 kW. With the market share of electric vehicles continuing to grow, there is a great opportunity for wide bandgap semiconductors such as silicon carbide (SiC) to improve the efficiency and size of the motor drives in these applications. In order to accomplish this goal, careful design and selection of each component in the system for optimum performance from an electrical, mechanical, and thermal …

Iot Camera System For Monitoring Strawberry Fields, Simon Schoennauer

Master's Theses

A wireless imaging system for monitoring strawberry fields provides enough quality image data for computer vision algorithms to make meaningful yield predictions. This report contains a design for a wireless sensor network modified with mesh networking techniques to extend coverage range and a solar energy harvesting system to improve sensor node lifetime. A two hop system with six nodes is implemented in a laboratory environment validating the communication systems integrity over an 800’ range. Moving from a primary battery system to solar energy harvesting increases the module lifetime indefinitely.

Growth And Characterization Of Semiconductor Materials And Devices For Extreme Environments Applications, Abbas Sabbar

Graduate Theses and Dissertations

Numerous industries require electronics to operate reliably in harsh environments, such as extreme high temperatures (HTs), low temperature (LT), radiation rich environments, multi-extreme, etc. This dissertation is focused on two harsh environments: HT and multi-extreme.

The first study is on HT optoelectronics for future high-density power module applications. In the power modules design, galvanic isolation is required to pass through the gate control signal, reject the transient noise, and break the ground loops. The optocoupler, which consists of a lighting emitting diode (LED) and photodetector (PD), is commonly used as the solution of galvanic isolation at room temperatures. There is …

Novel Memristor Based True Random Number Generator, Scott Stoller

Boise State University Theses and Dissertations

Random numbers are an important, but often overlooked part of the modern computing environment. They are used everywhere around us for a variety of purposes, from simple decision making in video games such as a coin toss, to securing financial transactions and encrypting confidential communications. They are even useful for gambling and the lottery.

Random numbers are generated in many ways. Pseudo random number generators (PRNGs) generate numbers based on a formula. True random number generators (TRNGs) capture entropy from the environment to generate randomness. As our society and our devices become more connected in the digital world, it is …

Simulation Of An Sp8t 18 Ghz Rf Switch Using Smt Pin Diodes, Andre De Souza Vigano

Master's Theses

Radio frequency (RF) and microwave switches are widely used in several different applications including radar, measurement systems, telecommunications, and other areas. An RF switch can control a radar’s transmit vs. receive mode, select the operating band, or direct an RF signal to different paths. In this study, a single pole eight throw (SP8T) switch using only Surface Mount (SMT) components is designed and simulated in Keysight’s Advanced Design System (ADS). Single pole eight throw is defined as one input and eight possible outputs. A star network configuration with series-shunt PIN diode switches is used to create the 8-way RF switch. …

Design And Evaluation Of High Power, High Efficiency And High Power Density Motor Drives For More Electric Aircrafts, Zhao Yuan

Graduate Theses and Dissertations

More-electric aircraft (MEA) is an attractive concept as it can reduce carbon dioxide emission, relieve fossil-fuel consumption, improve the overall efficiency of aircraft, and reduce the operational costs. However, it poses substantial challenges in designing a high-performance motor drive system for such applications. In the report of Aircraft Technology Roadmap to 2050, the propulsion converter is required to be ultra-high efficiency, high power density, and high reliability. Though the wide band-gap devices, such as the Silicon-carbide based Metal Oxide Silicon Field Effect (SiC-MOSFET), shows better switching performance and improved high-temperature performance compared to the silicon counterparts, applying it to the …

High-Temperature Optoelectronic Device Characterization And Integration Towards Optical Isolation For High-Density Power Modules, Syam Madhusoodhanan

Graduate Theses and Dissertations

Power modules based on wide bandgap (WBG) materials enhance reliability and considerably reduce cooling requirements that lead to a significant reduction in total system cost and weight. Although these innovative properties lead power modules to higher power density, some concerns still need to be addressed to take full advantage of WBG-based modules. For example, the use of bulky transformers as a galvanic isolation system to float the high voltage gate driver limits further size reduction of the high-temperature power modules. Bulky transformers can be replaced by integrating high-temperature optocouplers to scale down power modules further and achieve disrupting performance in …

Fractional Order Identification Method And Control: Development Of Control For Non-Minimum Phase Fractional Order System, Majid Abdullah Alhomim

Graduate Theses and Dissertations

The increasing use of renewable energy has resulted in the need for improved a dc-dc converters. This type of electronic-based equipment is needed to interface the dc voltages normally encountered with solar arrays and battery systems to voltage levels suitable for connecting three phase inverters to distribution level networks. As grid-connected solar power levels continue to increase, there is a corresponding need for improved modeling and control of power electronic converters. In particular, higher levels of boost ratios are needed to connect low voltage circuits (less than 1000 V) to medium voltage levels in the range of 13 kV to …

Robust Control Of A Multi-Phase Interleaved Boost Converter For Photovoltaic Application Using Μ-Synthesis Approach, Badur Mueedh Alharbi

Graduate Theses and Dissertations

The high demand of energy efficiency has led to the development power converter topologies and control system designs within the field of power electronics. Recent advances of interleaved boost converters have showed improved features between the power conversion topologies in several aspects, including power quality, efficiency, sustainability and reliability.

Interleaved boost converter with multi-phase technique for PV system is an attractive area for distributed power generation. During load variation or power supply changes due to the weather changes the output voltage requires a robust control to maintain stable and perform robustness.

Connecting converters in series and parallel have the advantages …

Design Of A Single-Carrier Pulse Width Modulation With Submodule Fault-Tolerant Capability For Modular Multilevel Converter, Tuanku Badzlin Hashfi

Student Works (2020-2029)

Multilevel converters are attracting a lot of attention and becoming one of the energy conversion choices for new topologies and control in industry applications and research fields. Modular multilevel converters (MMCs) are considered very promising among converter topologies for future medium-voltage and high-power applications compared to NPC, FC and CHB topologies. The improved phase disposition pulse width modulation (PDPWM) technique control for MMCs, which has a fault-tolerant capability, is presented. This study presents two methods to distribute pulses into submodules (SMs) by using PDPWM which has drawback to distribute the power equally among the submodules (SMs). First method, this study …

Under Frequency Load Shedding Scheme For Islanded Distribution System Based On Mixed Integer Linear Programming, Sohail Sarwar

Student Works (2020-2029)

In recent years, significant climate changes have pivoted the distribution system towards utilization of renewable energy, particularly through distributed generators (DGs). Although DGs offer many benefits, its integration affects the stability of the system, which could lead to blackout, when the grid is disconnected. The system frequency will drop drastically if DG’s generation capacity is less than the total load demand in the network. In order to sustain the system stability, Under Frequency Load Shedding (UFLS) is a commonly used technique to minimize the difference in load demand and power generation. However, existing load shedding techniques are lack in accurate …

Fusion-Features And Visual-Dictionary Image Recognition Methods For Apple Classification In Smart Manufacturing, Ahsiah Ismail

Student Works (2020-2029)

Smart manufacturing enables an efficient manufacturing process to optimize production. The optimization is performed through data analytics that requires reliable and informative data as input. Therefore, in this research, two image recognition feature extraction methods namely Curvelet Wavelet-Gray Level Co-occurrence Matrix (CWGLCM) and Fuzzy-Spatial Pyramid Matching (F-SPM) are proposed to provide reliable inputs for vision-based apple classification in smart manufacturing. Feature extraction is one of the major steps that could influent the efficiency of the manufacturing process. The CW-GLCM method is a feature extraction of fusion-features with Decision Tree classifier, while the F-SPM method uses a visual-dictionary based method to …

New Metal Based Saturable Absorber For Ultrashort Pulse Generation, Muhammad Taufiq Ahmad

Student Works (2020-2029)

Cost-efficient, robust and flexible laser systems are vital for a wide-range of applications ranging from high-precision material processing to biomedicine. This thesis aims to explore pure silver and gold based saturable absorbers (SAs) as Q-switcher and mode-locker in various fibre laser cavities. The generations of Q-switched pulses in 1-,1.55-, and 2-micron regions have been successfully demonstrated using a pure gold, which was deposited using electron beam deposition onto a PVA thin-film as SA. For instance, a stable Q-switched thulium-doped fibre laser (TDFL) operating at 1949 nm was successfully demonstrated with the gold SA. The proposed laser generates Q switched pulses …

Predicting Quality Of Delivery Metrics For Adaptive Video Codec Sessions, Obinna Izima, Ruairí De Fréin, Mark Davis

Conference papers

Predicting video quality will continue to be an active area of research given the dominance of video traffic for years to come. Network service practitioners that are poised to handle the strain on the existing limited bandwidth constraints are better placed to be SLA-compliant. The dynamic and time-varying nature of cloud-hosted services require improved techniques to realize accurate models of the systems. To address this challenge: (1) we propose Codec-aware Network Adaptation Agent (cNAA), an online light-weight data learning engine that achieves accurate and correct predictions of quality of delivery (QoD) metrics, namely jitter for video services. cNAA achieves this …

A New Method Of Statcom Controlling For Harmonic Mitigation And Power Factor Correction, Doha Jdeed

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

This paper presents a control algorithm of 3ph STATic synchronous COMpensator (STATCOM). The algorithm depends on the accurate reference currents extraction from only the nonlinear load current spec-trum in frequency domain using Fast Fourier Transfer (FFT). Then the determined harmonics and reactive components of load current are added together to form the compensating reference signals, the PI controllers then generate signals which control the Pulse Width Modulation (PWM) method. The simulation of the study is carried out under MATLAB/Simulink environment to show the usefulness of this control algorithm with nonlin-ear dynamic loads. It determines exactly the phase shift between the …

Intelligent Data-Driven Energy Flow Controllers For Renewable Energy And Electrified Transportation Systems, Juan Rafael Nunez Forestieri

LSU Doctoral Dissertations

In recent years, large scale deployments of electrical energy generation using renewable sources (RES) such as wind, solar and ocean wave power, along with more sustainable means of transformation have emerged in response to different initiatives oriented toward reducing greenhouse gas emissions. Strategies facilitating the integration of renewable generation into the grid and electric propulsion in transportation systems are proposed in this work.

Chapter 2 investigates the grid-connected operation of a wave energy converter (WEC) along with a hybrid supercapacitor/undersea energy storage system (HESS). A combined sizing and energy management strategy (EMS) based on reinforcement learning (RL) is proposed. Comparisons …

Effect Of Landfill Leachates On Some Water Quality Indicators Of Selected Surface Water And Groundwater At Ilokun, Ado-Ekiti, Nigeria, Olorunwa Omofunmi, Adesola Satimehin, Abraham Oloye, Okwunna Umego

Makara Journal of Technology

This study was conducted to examine the impact of dumpsites on the quality of groundwater and surface water. The water samples and leachates were collected from dumpsites in respective zones. The physicochemical properties of the samples were examined and determined in accordance with the standards of the American Public Health Association. Results indicated that the groundwater and surface water that are close to the dumpsites have an electrical conductivity of 385 and 245 Sd/cm, total dissolved solids of 168 and 128 mg/L, a turbidity of 4.6 and 22 NTU, a total alkalinity of 103 and 50 mg/L, a total hardness …

Optimal Distribution System Reconfiguration Incorporating Dg And Variable Load Profile Using Artificial Neural Network, Hesham Hanie Youssef

Student Works (2020-2029)

Optimal network reconfiguration is a common method used in distribution systems to ensure minimum power losses are always attained. This is very important task for achieving cost effective operation. Due to varying load demands, conventional network reconfiguration techniques have to be repeated whenever system loading changes to find a new configuration that has minimum power losses. This task is time consuming and ineffective approach for a real time application. Therefore, this research proposes an Artificial Neural Network (ANN) technique for optimal distribution network reconfiguration to overcome long processing time, mainly in load variation case. The proposed method involves; (1) Implement …

Microstrip Filters: A Review Of Different Filter Designs Used In Ultrawide Band Technology, Hussain Bohra, Giriraj Prajapati

Makara Journal of Technology

In this study, optimization techniques applied in designing microstrip bandpass ultra-wideband (UWB) filters are presented. Optimization based on various defected ground structure techniques, resonator designs, and type of dielectric materials is discussed. Microstrip bandpass filters implemented at UWB frequency bands used in wireless communication systems have key features to control frequency response in passband and stopband. Optimization techniques are studied to attain optimum performance of bandpass microstrip filters to ensure minimum insertion loss, high selectivity, compactness, sharp transitions at cut-off frequencies, high return loss, and excellent linearity. Extensive study shows that proper selection of fabrication techniques and type of material …

Effect Of Catholyte Concentration On Current Production During Chocolate Industry Wastewater Treatment By A Microbial Fuel Cell, Diana Rahayuning Wulan, Suprihanto Notodarmojo

Makara Journal of Technology

Microbial fuel cells (MFCs) use bacteria as a catalyst to oxidize organic and/or inorganic substrates and produce electric currents. Wastewater could function as an electron donor in the anode chamber and, thus, represents a very promising energy source. Catholytes, as electron acceptors, influence power production in MFCs by increasing the availability of electrons. The present research aims to determine the influence of catholyte concentration on current production in an aerobic two-chamber MFC. Aerobic treatment was carried out in the two-chamber MFC operated in an incubator at 37  1 °C with and without aeration in the cathode chamber. Wastewater from …

Evaluation Of Il-17a And Il-17f Gene Expression In Peripheral Blood Mononuclear Cells In Different Clinical Stages Of Chronic Hepatitis B Infection In An Iranian Population, Tannaz Akbari Kolagar, Seyed Reza Mohebbi, Fatemeh Ashrafi, Shahrzad Shoraka, Hamid Asadzadeh Aghdaei, Mohammad Reza Zali

Makara Journal of Technology

Hepatitis B virus (HBV) infection is one of the main causes of liver damage, which can also lead to chronic hepatitis B (CHB) infection. More than 240 million individuals worldwide are chronic carriers of HBV. Among individuals with CHB who are untreated, approximately 15% – 40% will progress to liver cirrhosis or cancer. The interactions between HBV and host immune response play significant roles in the progression of CHB. CHB can be generally divided into four different clinical phases: immune tolerance (IT), immune clearance, inactive carrier, and Hepatitis B surface antigen (HBsAg)-negative reactivation phase (ENEG). Many studies showed that interleukins …

Redesign Of Product Packaging With Kansei Engineering: Empirical Study On Small-Medium Enterprises In Indonesia, Amalia Suzianti, A. Aldianto

Makara Journal of Technology

Small-medium enterprises (SMEs) in Indonesia have been proven to be one of the important pillars of the national economy. Unfortunately, some problems hinder their development, and one of the critical problems is the quality of product packaging. The packages of SME products are considered poor, dirty, and unattractive. Packaging problem is one of the factors why consumers are less interested in buying and why SME products always lose in the competition with other products. This study discusses how to employ Kansei engineering to design better SME product packaging with a focus on psychological (affective) aspects. This research concludes that there …

Effect Of Pvdf-Ca Ratio On Electrospun Membrane For Water–Oil Filtration Application, Mohamad Haziq Alias, Izan Izwan Misnon, Rajan Jose

Makara Journal of Technology

Oil spillage and generation of industrial water–oil wastewater mixture ignite a focus on filtration technology. Electrospinning technique provides a versatile route in producing tunable diameter and pores in nanofiber filtration membrane development. In this work, polyvinylidene difluoride (PVDF) and cellulose acetate (CA) electrospun membrane at different concentration ratios were synthesized for water–oil filtration application. The polymeric solutions were characterized using viscometer and conductivity testing, whereas the membranes were analyzed using contact angle, tensile test, scanning electron microscopy (SEM), and filtration testing of oil (dichloromethane). Conductivity test showed a decreased conductivity along with decrement of CA ratio in the polymeric solution. …

Performance-Shaping Factors Of Personnel Performing Evacuation And Escape On Offshore Installations In Tropical, Norafneeza Norazahar, Nur Azizah Arryanie Morshidi, Arshad Ahmad, Wijayanuddin Mohd Ali

Makara Journal of Technology

Performance-shaping factors (PSFs) are used to address the strengths and weaknesses of workers performing escape and evacuation activities. These PSFs are time, environmental factors as stressors, complexity of activities, experiences and training, interaction between workers and emergency equipment, workers’ physical conditions, and procedures. This paper presents a survey work on fitness for the duty of workers performing basic offshore survival and emergency response training. The training provides credible scenarios of escape and evacuation in case of an emergency of offshore installations in tropical waters. The survey is conducted among participants of the tropical basic offshore safety induction & emergency training …

Iot Asset Tracker, Jonny M. Erickson, Matt A. Murray

Electrical Engineering

This senior project will be the completion of an IoT asset Tracker. In today’s day and age, technology is weaving its way into every aspect of life. Because of this, we demand to know more and more information about everything that is going on in our lives. One of these needed pieces of information is knowing the location of our most valuable assets. This is the main goal of this project: to build a portable SMS driven GNSS tracking device. The device is designed to provide two methods of tracking for any mobile asset. The device will utilize a large …

A Simplified Accuracy Enhancement To The Saleh Am/Am Modeling And Linearization Of Solid-State Rf Power Amplifiers, Haider Al-Kanan, Fu Li

Electrical and Computer Engineering Faculty Publications and Presentations

The Saleh behavioral model exhibits high prediction accuracy for nonlinearity of traveling-wave tube power amplifiers (TWT-PAs). However, the accuracy of the Saleh model degrades when modeling solid-state power amplifiers (SSPAs) technology. In addition, the polynomial expansion of the Saleh model consists of only odd-order terms as analyzed in this work. This paper proposes a novel model accuracy enhancement for the Saleh amplitude-to-amplitude (AM/AM) model when applied to radio frequency (RF) SSPAs. The proposed model enhancement accounts for the second-order intermodulation distortion, which is an important nonlinearity challenge in wideband wireless communications. The proposed static AM/AM model is a three-parameter rational …

Cybersecurity Strategy Against Cyber Attacks Towards Smart Grids With Pvs, Fangyu Li, Maria Valero, Liang Zhao, Yousef Mahmoud

KSU Proceedings on Cybersecurity Education, Research and Practice

Cyber attacks threaten the security of distribution power grids, such as smart grids. The emerging renewable energy sources such as photovoltaics (PVs) with power electronics controllers introduce new potential vulnerabilities. Based on the electric waveform data measured by waveform sensors in the smart grids, we propose a novel cyber attack detection and identification approach. Firstly, we analyze the cyber attack impacts (including cyber attacks on the solar inverter causing unusual harmonics) on electric waveforms in distribution power grids. Then, we propose a novel deep learning based mechanism including attack detection and attack diagnosis. By leveraging the electric waveform sensor data …

Hu Aquaponics Monitoring And Control System : European Annual Edunet Conference 2020, Rachel L. Fogle, Glenn P. Williams, Josh R. Krug

Harrisburg University Presidential Research Grants

The functional purpose of the HU Aquaponics Monitoring and Control System Project is to develop an environmental and plant monitoring and control system for the HU Aquaponics Lab, located in the Student Union. The project involves the design and implementation of technology that will regularly take measurements from the environment (e.g., air temperature, water temperature, pH, dissolved oxygen, etc). PLCnext Technology will systematically collect, store, and web-publish the measurement data for HU researchers and the public to use for scientific research.