Electrical and Electronics Commons^™

A Folded Cascode Operational Amplifier With Wide-Swing Current Mirrors And High Icmr, Designed With A 1.2-Micron Silicon-Carbide Process, Austin Gattis

Electrical Engineering Undergraduate Honors Theses

This thesis describes in detail the process of designing, simulating, and creating the layout for a modified folded cascode op-amp, fabricated with silicon carbide MOSFETS. The modifications consist of using a wide-swing current mirror to help deal with output voltage issues stemming from high threshold voltages in the silicon carbide process, as well as using a modification that allows for an increased input common mode range. The folded cascode op-amp uses silicon carbide transistors, as it is intended to be used for high temperature applications, ideally in the 25 C - 300 C range. It is designed to have 25 …

Command Validation For Cybersecure Power Router, Isaac M. Kroger

Electrical Engineering Undergraduate Honors Theses

For grid-connected homes equipped with solar panels, power electronics are necessary to manage and convert power between the solar panels, battery storage, grid, and residential load. A power router can be used to manage these power electronics and govern power generation, storage, and distribution within the household. This level of control makes power routers that do not employ cybersecurity a target for external attacks. The use of command validation is an effective way to prevent unauthorized commands from maliciously altering the state of a home’s power router. The purpose of this thesis is to describe the development of the command …

Automatic Testing In The United States Air Force, Pearson Wade

Computer Science and Computer Engineering Undergraduate Honors Theses

The need for standardized Automatic Testing Equipment in the United States Department of Defense has brought about new policies and procedures within entities like the United States Air Force. The diversity and lifespan of systems such as jets, missiles, drones, and other electronics have brought on the need for a new system known as the Versatile Depot Automatic Test Station, or VDATS. The VDATS handles the automatic testing of replaceable digital circuits from different systems. I was introduced to this system firsthand during my time as an intern at Tinker AFB, Oklahoma. This new standardized approach to testing a diverse …

A Human Powered Micro-Generator For Charging Electronic Devices, John Adam

Senior Theses

A hand-pulled generator has been designed and tested. A preliminary result has been obtained and discussed. This device was created to provide outlet-free charging. Electronic devices are useful when going out into the wilderness. A portable power supply is necessary to keep an electronic device alive. This project created a device that converts human energy into electricity to charge electronic devices. This thesis overviews the device’s design, build, and tests. Two different tests were run to determine that the device is capable of charging the storage battery. The device presented can provide 14 minutes of charging time with one hour …

Efficient Control Message Dissemination In Dense Wireless Lighting Networks, Conrad Dandelski

PhDs

Modern lighting systems using LED light sources lead to dense lighting installations. The control of such systems using wireless Machine-to-Machine (M2M) where standard LED light sources are replaced by wirelessly controllable LED light sources create new problems which are investigated in this thesis. Current approaches for control message transmission is such networks are based on broadcasting messages among luminaires. However, adequate communication performance - in particular, sufficiently low latency and synchronicity - is difficult to ensure in such networks, in particular, if the network is part of a wireless building management system and carries not only low-latency broadcast messages but …

Security Analysis Of The Uconn Husky One Card, Trevor Phillips

Honors Scholar Theses

The “Husky One Card” is the name given to student IDs at the University of Connecticut. It can identify students, faculty, and staff in a variety of situations. The One Card is used for meal plans, Husky Bucks (an equivalent of money, but valid only in the Storrs area), residence hall/ university facility access, and student health services. The current Husky One Card consists of a picture identification on the front and a standard 1-dimensional barcode and 3-track magnetic strip on the back.

The goal of this thesis is to investigate the feasibility of cloning Husky One Cards, the ease …

Evaluation Of Terahertz Imaging For Breast Cancer Detection Using Image Morphing, Tanny Andrea Chavez Esparza

Graduate Theses and Dissertations

This thesis proposes the use of a mesh morphing algorithm for the quantitative evaluation of terahertz (THz) images. This work differs from traditional evaluation methods based on qualitative evaluation because it provides a fair and quantitative measurement of the THz imaging system's performance. The objective of the algorithm is to match the alignment, shape, and resolution of the THz and reference pathology images. Therefore, the proposed morphing method provides a pathology reference for a pixel-by-pixel evaluation of the region classification in the THz image. To achieve this, the morphing algorithm aligns the images using the Pearson's correlation coefficient and reshapes …

Challenges In Flexible Microsystem Manufacturing : Fabrication, Robotic Assembly, Control, And Packaging., Danming Wei

Electronic Theses and Dissertations

Microsystems have been investigated with renewed interest for the last three decades because of the emerging development of microelectromechanical system (MEMS) technology and the advancement of nanotechnology. The applications of microrobots and distributed sensors have the potential to revolutionize micro and nano manufacturing and have other important health applications for drug delivery and minimal invasive surgery. A class of microrobots studied in this thesis, such as the Solid Articulated Four Axis Microrobot (sAFAM) are driven by MEMS actuators, transmissions, and end-effectors realized by 3-Dimensional MEMS assembly. Another class of microrobots studied here, like those competing in the annual IEEE Mobile …

Grid-Connected Photovoltaic Systems Based On Nonlinear Control., Pablo R. Rivera

Electronic Theses and Dissertations

Nowadays, due to the high-scale penetration of photovoltaic systems, reliable and efficient grid-connected photovoltaic (PV) systems utilizing the advances of power electronics and control system technology are desirable. Thus, single-stage grid-connected photovoltaic systems, have gained attention, especially in low voltage applications. However, PV systems exhibit nonlinear behavior that could negatively affect the performance of the system if they are not adequately compensated for. In this dissertation, using the general structure for the synchronous dq0 frame, a single-stage three-phase grid-connected photovoltaic system, and a single-stage single-phase grid-connected PV system, both with a nonlinear control strategy, are developed to track the maximum …

Developing A Hil-Based Software Platform For Testing Electric And Hybrid Vehicle Powertrains, Daniel Schwartz

Graduate Theses and Dissertations

The objective of this thesis is to present a dynamometer test stand with hardware in the loop (HIL) testing capabilities for the evaluation of electric and hybrid vehicle powertrains under realistic driving conditions. The traction inverter and dc/dc converter are two crucial subsystems of the powertrain and new prototypes require significant validation before implementing into production vehicles. As fundamental technologies such as power modules, thermal management systems, and passive components improve; the performance improvements to the overall system must be demonstrated. The plug and play nature of the testbed makes it ideal for making direct comparisons of design iterations under …

Radio-Frequency Transmitter Geolocation Using Non-Ideal Received Signal Strength Indicators, Samuel Whiting

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Locating a radio transmitter is important in a number of problems such as finding radio tags, people with radios, and devices that are collecting information in an unauthorized manner. Locating a radio transmitter is inherently difficult because the radio waves of concern are not in the visible spectrum, they reflect and distort easily, and they propagate at the speed of light.

A number of methods for locating transmitters are currently used, the majority of which require expensive hardware and extensive processing. This thesis presents a method of using simpler measurements to produce similar location estimates in order to augment or …

Application Of Modular Multilevel Converters (Mmc) Using Phase-Shifted Pwm And Selective Harmonic Elimination In Distribution Systems, Thouhidul Islam

Graduate Theses and Dissertations

Reducing the size and weight of a power electric system is a prodigious challenge to researchers as the development of the latest technologies emerge in the field of electrical engineering. A similar urge is there to develop a light-weight mobile power substation (MPS) to use in the electric power distribution systems during emergency conditions. This thesis proposes a power electronics based solution using the modular multilevel converter (MMC) topology to design the MPS system. The market-available power semiconductor devices are analyzed and suitable devices are selected to design the system. The phase-shifted pulse width modulation (PS-PWM) and selective harmonic elimination …

Fabrication And Characterization Of Graphene Based 2d Materials For Supercapacitors, Anishkumar Manoharan

Graduate Theses and Dissertations

Supercapacitors have attracted a lot attention due to their efficient energy storage. In comparison to batteries, supercapacitors have high capacitance, energy, and power densities per unit mass than conventional capacitors. Carbon based materials are most promising in supercapacitor application due to their outstanding physical and electrochemical behavior. In this work, a facile method to synthesize a nanocomposite electrode consisting of annealed carbon from carbon ink and MoS2 was demonstrated. Effects of various aqueous and solid electrolytes were studied. It was found that the nanocomposite electrode with 10% MoS2 and 1M Na2SO4 as the aqueous electrolyte tested using the three electrode …

Gating Methods For High-Voltage Silicon Carbide Power Mosfets, Audrey Dearien

Graduate Theses and Dissertations

The objective of this thesis is to assess the challenges associated with driving Silicon Carbide (SiC) power devices, and to compare the potential gate drive methods for these devices which address those challenges. SiC power devices present many benefits that make them suitable for next generation automotive, power utility grid, and energy management applications. High efficiency, increased power density, and reliability at high-temperatures are some of the main benefits of SiC technology. However, the many challenges associated with these devices have prevented their adoption into industry applications. The argument is made in this thesis that the gate driver is a …

Music Keyboard Based On Flexible Hybrid Electronics, Anthony Hanson

Honors Theses

With the idea of creating a product using flexible hybrid electronics, the group decided to create a musical keyboard like a synthesizer. This is implemented using a printing technique called screen printing. This allowed the group to make several copies of the same sensors with a consistent thickness, roughness, and size. These keys, made of silver, are used as capacitive proximity sensors. When another conductive material comes within range of the key to change the polled capacitance by 2.7 pF, the note corresponding with that key is outputted.

In the interest of making this project a useful tool for someone …

Image Processing Applications In Real Life: 2d Fragmented Image And Document Reassembly And Frequency Division Multiplexed Imaging, Houman Kamran Habibkhani

LSU Doctoral Dissertations

In this era of modern technology, image processing is one the most studied disciplines of signal processing and its applications can be found in every aspect of our daily life. In this work three main applications for image processing has been studied.

In chapter 1, frequency division multiplexed imaging (FDMI), a novel idea in the field of computational photography, has been introduced. Using FDMI, multiple images are captured simultaneously in a single shot and can later be extracted from the multiplexed image. This is achieved by spatially modulating the images so that they are placed at different locations in the …

Study Of Mm-Wave Microstrip Patch Array On Curved Substrate, Zeeshan Ahmed, Kansheng Yang, Patrick Mcevoy, Max Ammann

Conference papers

A millimetre wave rectangular microstrip patch antenna array for fifth generation communications (5G) applications is presented. With the increase in demand for high data rates and capacity, there is a need to include mm-Wave frequencies for 5G. The 4×2 patch array is simulated and fabricated on a Rogers RT/Duroid 5880 substrate with a thickness of 0.25 mm. The effects of bending the substrate on the antenna performance are also presented. The experimental results show a fractional bandwidth and gain of more than 3% and 16.1 dBi, respectively.

Structural And Photoluminescence Properties Of Zno Thin Films Deposited By Ultrasonic Spray Pyrolysis, Iwan Sugihartono, Erfan Handoko, Vivi Fauzia, Artoto Arkundato, Lara Permata Sari

Makara Journal of Technology

Zinc oxide (ZnO) thin films on a silicon (Si) (111) substrate were grown herein using ultrasonic spray pyrolysis at 450 °C with different Zn concentrations. The ZnO thin films had X-ray diffraction patterns of a polycrystalline hexagonal wurtzite structure. The (002) and (101) peak intensities changed under different Zn concentrations. Furthermore, according to Scherer's and Stokes–Wilson equations, the crystallite size and the internal strain of the ZnO thin films in the (002) and (101) peaks changed with the Zn concentration. Optically, the photoluminescence spectra indicated that the ratio of the UV/GB emission of the ZnO thin films was the highest …

Real-Time Audio-Midi Controller, Brian Shino Balberchak

Computer Engineering

Most MIDI controllers used in music production use a regular keyboard to generate the MIDI notes that are sent to the synthesizer. This project aims to provide the user with a different way of generating MIDI data: by playing an instrument of their choice with a passive electronic pickup to generate MIDI notes that correspond with the fundamental frequency of the musical pitch being played. The pitch-detecting algorithm used in this application utilizes a modified form of auto-correlation.

As an embedded systems project that uses signal-processing techniques, the knowledge of topics from the following courses was essential:

EE 211: Op-Amp …

An Exploratory Study Of Sukuk Utilisation For Transportation Infrastructure Development In Indonesia, Fiona Lamari, Ayomi Dita Rarasati, Meilia Evita

Makara Journal of Technology

Investment in infrastructure is one of the principal drivers of the growth of the economy. For that reason, the Indonesian government has proposed an investment budget in the railway and sea and air transport sectors over the next 10 years. In order to overcome the burden of direct outflows and for the future, a study was conducted to lay down the framework of Shariah-compliant payments for the development of infrastructure in Indonesia in the transport sector. This paper aims to explore the opportunity and implementation of sukuk utilisation to develop transportation infrastructure. Secondary data study and interviews were selected for …

Small-Signal-Stability Enhancement Using A Power-System Stabilizer Based On The Cuckoo-Search Algorithm Against Contingency N-1 In The Sulselrabar 150-Kv System, Muhammad Ruswandi Djalal, Muhammad Yusuf Yunus, Herlambang Setiadi, Awan Uji Krismanto

Makara Journal of Technology

Small-signal stability is one of the main factors limiting power transmission in conventional power systems. This concern is primarily handled by adding damper windings of a synchronous generator and power-system stabilizer (PSS). However, due to the impact of the N-1 contingency, damper windings and a conventional PSS are insufficient to overcome this problem. Proper placement and design of the PSS are crucial for improving stability. One approach to optimizing the placement and tuning of the PSS is to use an artificial-intelligence method. Here, the cuckoo-search algorithm (CSA) is proposed to optimize the PSS tuning and placement. Based on simulation, it …

Isolation And Molecular Weight Characterization Of Tetragonula Laeviceps Honey Protein, Muhamad Sahlan, Nurul Azizah, Kazuaki Hakamada, Keiichi Noguchi, Masafumi Yohda

Makara Journal of Technology

The concentration of protein in honey is lower than polysaccharide. However, recently the honey’s protein is intensively studied and it showed that protein also have several biological activities such as antibacterial activity. The purpose of this research is to isolate and characterize Tetragonula laeviceps honey protein by determining the molecular weight. Honey protein of Trigona laeviceps was isolated using ultra-filtration with the membrane’s size of 30 kDa, then concentrated using tube membrane size 10 kDa. Molecular weight was analyzed by SDS PAGE. From the analysis, there was major protein band in honey produced by Tetragona laeviceps identified. The produced molecular …

Prerequisites For Public Acceptance Of Waste-To-Energy Plants: Evidence From Germany And Indonesia, Uwe Lahl, Barbara Zeschmar-Lahl

Makara Journal of Technology

Construction of waste incinerators often encounters resistance from the public. The minimum requirements for the ac- ceptance of these installations include modern air pollution control (APC) technology and safe disposal of residues. Confidence in the statements of government and government agencies as well as on those who support is an important point of acceptance. Independent scientific bodies such as universities can help to make this happen. In the case of the installation of waste into energy (WtE), such scientific support can be the measurement of emissions and their evalua- tion. Many products that enter the waste stream contain heavy metals, …

Hybrid Brain-Computer Interface: A Novel Method On The Integration Of Eeg And Semg Signal For Active Prosthetic Control, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko

Makara Journal of Technology

This paper describes a novel method for controlling active prosthetics by integrating surface electromyography (sEMG) and electroencephalograph signals to improve its intuitiveness. This paper also compares the new method (RTA-2) with other existing methods (AND and OR) for controlling active prosthetics. Based on analysis, RTA-2 features higher true positive rate (TPR) and balanced accuracy (BA) than AND method. On the other hand, the new method (RTA-2) yields lower false detection rate (FPR) than OR method. Analysis also shows that RTA-2 possesses equal TPR, FPR, and BA with the detection of movement intention using sEMG-based system. Although the RTA-2 method shows …

Seismic Response Analysis Along The Coastal Area Of Bengkulu During The September 2007 Earthquake, Lindung Zalbuin Mase

Makara Journal of Technology

A strong earthquake of 8.4 Mw occurred at the Sumatra Subduction Zone in September 12, 2007. The area that underwent the impact of the earthquake was located along the coastal area of the Bengkulu Province. A seismic ground response study was then performed with reference to the event. Several site investigations, including standard penetration test and shear wave velocity tests, were conducted to understand the subsoil condition. The data were used to analyze a ground response during the earthquake. The amplification factor of each site was obtained, and a comparison of the spectral accelerations was performed. The results showed that …

Coax-Fed Dipole-Type Applicator For Hepatic Cancer Rf Ablation, Basari Basari, Aditya Rakhmadi, Kazuyuki Saito

Makara Journal of Technology

Cancer is the third leading cause of mortality in the world and is one of the most difficult diseases to detect and cure. This fact motivates us to investigate a treatment method by using radiofrequency (RF) ablation. RF ablation therapy kills cancer cells by electromagnetically heating them up. The treatment uses an applicator that is inserted into the body to heat the cells. The cancer cells are exposed to a temperature of more than 60 °C in short duration (a few seconds to a few minutes), thereby causing cell destruction locally. To ensure effective treatment, a minimally invasive method is …

Fusion Of Audio And Visual Information For Implementing Improved Speech Recognition System, Vikrant Satish Acharya

Masters Theses

Speech recognition is a very useful technology because of its potential to develop applications, which are suitable for various needs of users. This research is an attempt to enhance the performance of a speech recognition system by combining the visual features (lip movement) with audio features. The results were calculated using utterances of numerals collected from participants inclusive of both male and female genders. Discrete Cosine Transform (DCT) coefficients were used for computing visual features and Mel Frequency Cepstral Coefficients (MFCC) were used for computing audio features. The classification was then carried out using Support Vector Machine (SVM). The results …

Segmented Control Of Electrostatically Actuated Bimorph Micromirrors, Kullen W. Waggoner

Theses and Dissertations

Electrostatic actuating bimorph beams are a MEMS device that can be used to control arrays of small micromirrors for optical beam scanning. Previous research has demonstrated that creating high-angle deflection using long repeating arms of bimorph beams is possible. The current devices lack precise control and measurement of the mirror deflection. A solution to improve control and measurement is by using segmented bias channels to control separate portions of the actuation arm. The amount of mirror deflection will vary depending on which segments of the arm are actuated. This thesis discusses the results of FEA modeling and testing.

Scheduling Based On Interruption Analysis And Pso For Strictly Periodic And Preemptive Partitions In Integrated Modular Avionics, Hui Lu, Qianlin Zhou, Zongming Fei, Rongrong Zhou

Computer Science Faculty Publications

Integrated modular avionics introduces the concept of partition and has been widely used in avionics industry. Partitions share the computing resources together. Partition scheduling plays a key role in guaranteeing correct execution of partitions. In this paper, a strictly periodic and preemptive partition scheduling strategy is investigated. First, we propose a partition scheduling model that allows a partition to be interrupted by other partitions, but minimizes the number of interruptions. The model not only retains the execution reliability of the simple partition sets that can be scheduled without interruptions, but also enhances the schedulability of the complex partition sets that …

Space-Angle Signal Processing Using A Modulated Scatter Array, Nasr Alkhafaji

Electrical and Computer Engineering PhD Day

A UHF signal processing technique is described in the Fourier Space-Angle domain that uses an array of scattering elements with reflection coefficients modulated at baseband. The illumination arrival angle distributes a UHF phase across the array, and the baseband modulator phase at each of the array elements determines the radiation angle of the desired scattered product. Undesired products are re-radiated in different directions. Example 1, 2 and 4 element arrays operate at 432 MHz array with 700 Hz modulation. 2 element arrays cancel one sideband, and the 4 element array cancels both the undesired sideband and 2nd order products. Reflection …