Electrical and Electronics Commons^™

The Effect Of Power Supply Ramp Time On Sram Puf's, Abdelrahman T. Elshafiey Mr.

Electrical and Computer Engineering ETDs

Physical unclonable functions (PUFs) are security primitives that exploit the device mismatches. PUFs are a promising solution for hardware cryptography and key storage. They are used in many security applications including identification, authentication and key generation. SRAM is one of the popular implementations of PUFs. SRAM PUFs offer the advantage, over other PUF constructions, of reusing resources (memories) that already exist in many designs.

In this thesis, for the first time, it is demonstrated that the start-up value of an SRAM PUF could be different depending on the SRAM power supply rising time. An analytical model has been developed to …

Development Of A Bio-Inspired, Low-Cost, Piezoelectric Airflow Sensor, Evan Unruh

Research Horizons Day Posters

No abstract provided.

The Design And Optimization Of Cooperative Mobile Edge, Xueqing Huang

Dissertations

As the world is charging towards the Internet of Things (IoT) era, an enormous amount of sensors will be rapidly empowered with internet connectivity. Besides the fact that the end devices are getting more diverse, some of them are also becoming more powerful, such that they can function as standalone mobile computing units with multiple wireless network interfaces. At the network end, various facilities are also pushed to the mobile edge to foster internet connections. Distributed small scale cloud resources and green energy harvesters can be directly attached to the deployed heterogeneous base stations.

Different from the traditional wireless access …

Forensic Research On Detecting Seam Carving In Digital Images, Jingyu Ye

Dissertations

Digital images have been playing an important role in our daily life for the last several decades. Naturally, image editing technologies have been tremendously developed due to the increasing demands. As a result, digital images can be easily manipulated on a personal computer or even a cellphone for many purposes nowadays, so that the authenticity of digital images becomes an important issue. In this dissertation research, four machine learning based forensic methods are presented to detect one of the popular image editing techniques, called ‘seam carving’.

To reveal seam carving applied to uncompressed images from the perspective of energy distribution …

Laser Microphone, Michael Mckee

Thinking Matters Symposium Archive

The laser microphone is a multifaceted project. The main objective of this project is the design and construction of a laser microphone. This device is able to detect sound via variations in light waves. Production of this device being one obvious outcome of the project, observation and experimentation comprise the primary focus of the venture. Experiments reveal exactly how well this device is able to function and if it is able to be used in specific engineering applications. To function appropriately, this device should handle the translation from soundwaves to light waves with little to no alteration. Full signal analysis …

Design Verification Of Mems Resonators With Fem Simulator, Joshua Wiswell

Thinking Matters Symposium Archive

The purpose of this project was to use COMSOL, an advanced FEM (finite element modeling) software, to analyze a Coupled Thermal Resonator. This Coupled Thermal Resonator was previously constructed in L-Edit, but when analyzed in COMSOL, it produced undesirable results. This project focused on improving the design and model of the Resonator to improve simulation results and evaluating the actual response of the MEMS device to determine if simulated results were accurate for the actual device. Many different factors may have contributed to producing the double peak seen in the simulation, including the weak coupling between the two resonators. These …

Rural Broadband Mobile Communications: Spectrum Occupancy And Propagation Modeling In Western Montana, Erin Wiles

Graduate Theses & Non-Theses

Fixed and mobile spectrum monitoring stations were implemented to study the spectrum range from 174 to 1000 MHz in rural and remote locations within the mountains of western Montana, USA. The measurements show that the majority of this spectrum range is underused and suitable for spectrum sharing. This work identifies available channels of 5-MHz bandwidth to test a remote mobile broadband network. Both TV broadcast stations and a cellular base station were modelled to test signal propagation and interference scenarios.

Centralized Control For Dc Microgrid Using Finite State Machine, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

In this paper, an autonomous communication-based centralized control for DC microgrids (MG) has been developed and implemented. The proposed controller enables smooth transition between various operating modes. Finite state machine (FSM) has been used to mathematically describe the various operating modes (states), and events that may lead to mode changes (transitions). Therefore, the developed centralized controller aims at optimizing the performance of MG during all possible operational scenarios, while maintaining its reliability and stability. Results of selected cases have been presented. These results show stable transition between modes, verifying the validity and applicability of the proposed controller.

A Plastic Design Method For Rc Moment Frame Buildings Against Progressive Collapse, Hadi Faghihmaleki

Makara Journal of Technology

In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of …

In Vitro Toxicity Evaluation Of Caffeine Imprinted Polymer (Caf-Mip) For Decaffeination Method On Normal Chang Liver Cells, Fatimah Hashim, Faizatul Shimal Mehamod, Naizatul Akmal Nawi

Makara Journal of Technology

Over consuming of caffeine is one of the factors to a few health problems such as insomnia, hypertension and cardiovascular disease. This preliminary study was conducted to evaluate the Caffeine-Imprinted Polymer (CAF-MIP) toxicity that was synthesized for a new alternative method for decaffeination. It is crucial to evaluate the toxicity of CAF-MIPas this product is potential to be used as complimentary with any drinks containing caffeine. In this study, the CAF-MIP toxicity potential was confirmed on Normal Chang Liver cell (NCLC) based on its IC50 value andacridine orange and propidium iodide (AO/PI) staining for mode of cell death observation.Proliferation assay …

Sorption And Ion Exchange Behaviour Of Natural Zeolite Packing, Chandra Wahyu Purnomo, Bernice Lenora, Wiratni Budhijanto, Hirofumi Hinode

Makara Journal of Technology

It is well known that zeolite is an efficient metal ions adsorbent. The excess charge of the zeolite building blocks i.e. (AlO4)-5 and (SiO4)-4 creating a negative surface charge that attract metal cations. Beside the surface charge, zeolite also has three dimensional pore structure and reasonably large surface area which also can be used as adsorption sites. Ease of cation uptake make it suitable for many process with adsorption and desorption application. This study was conducted to observe the sorption and ion exchange behaviour of zeolite-betonite rings toward iron and cobalt cations. The results shows that the adsorption patterns follow …

A Study Of The Sensitivity Of Energy Conversion Efficiency To Load Variation In Class-E Resonant Power Inverter, Richard Samuel Jennings

Electrical & Computer Engineering Theses & Dissertations

In this thesis the sensitivity of energy conversion efficiency (ECE) and output power of a class-E resonant inverter under variable resistive and inductive load assignments is examined for wireless power transfer (WPT) applications. By performing simulation and mathematical analysis, it was found that the on-resistance of the switching device has minor effect on the design’s efficiency. Additional comparisons between the simulation and mathematical analysis show reasonable output power and ECE load variation performance for the design, but with unique load impedances where zero voltage switching (ZVS) and zero derivative switching (ZDS) are achieved. These comparisons also expose inaccurate mathematical assumptions. …

Study Of A High-Efficient Wide-Bandgap Dc-Dc Power Converter For Solar Power Integration, Yashwanth Bezawada

Electrical & Computer Engineering Theses & Dissertations

This research focuses on the design and analysis of a Boost cascaded Buck-Boost (BoCBB) power converter with super high efficiency in electric power conversion. The BoCBB power converter is based on emerging wide-bandgap silicon-carbide (SiC) MOSFETs and Schottky diodes, which have only 1/6 times of power loss in traditional silicon power semiconductor devices. The BoCBB power converter can be widely applied in solar harvesting for the National Aeronautics and Space Administration (NASA), military bases and electric utilities, as well as high-power DC motor drives for the electric vehicles, robotics, and manufacturing and product lines.

This research analyzed the topology and …

Encapsulation Process Of Propolis Extract By Casein Micelle Improves Sunscreen Activity, Muhamad Sahlan, Dara Dienayati, Darul Hamdi, Soraya Zahra, Heri Hermansyah, Malyn Chulasiri

Makara Journal of Technology

Propolis, a wax bee glue, have antioxidant activity and effective as broad spectrum UVB and UVA photoprotection sunscreens agent. To improve photoprotection activity in sunscreen cream, the propolis was encapsulated by casein micelle. The Indonesian propolis was extracted by ethanol and separated the wax by freeze precipitation. The extract was encapsulated by casein and reduced their size by ball mill homogenizer with the encapsulation efficiency about 80% and size of particles about 80 nm. The particles was applied in sunscreen cream, evaluate their stabillity and photoprotection activity Sun Protection Factor (SPF) spectrophotometer (Optometric 290s). The results shows that the selected …

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

Influence Of Polyethylene Glycol (Peg) In Cmc-Nh4br Based Polymer Electrolytes: Conductivity And Electrical Study, Nur Khalidah Zainuddin, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried with new type and promising polymer electrolytes system by development of carboxyl methylcellulose (CMC) doped NH4Br and plasticized with polyethylene glycol (PEG). The sample was successfully prepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity and thermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedance spectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1 at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable …

Purification Simulation With Vapor Permeation And Distillation-Adsorption In Bioethanol Plant, Misri Gozan, Mia Sari Setiawan, Kenny Lischer

Makara Journal of Technology

High purity of Bioethanol is required in biofuel mixing with gasoline (EXX). In bioethanol production line, the azeotropic property of ethanol-water becomes the barrier for purification process. This study examined two bioethanol separation processes by support of simulation tools, Superpro Designer 9.0 software. Ethanol purity and a low costeconomical process were the major considerations. Purification method of vapor permeation membrane technology was compared with distillation-adsorption method. Data from previous lab experiments and some literatures were used. The results showed that distillation-adsorption method is more economical compared to vapor permeation technology. Payback period of the simulation is 3.9 years and 4.3 …

Silent Communication Device, Christopher Wayne Schutter

Master's Theses

Oral communication has constituted as a necessary aspect of how people interact with one another, but there are always situations where this form of communication can create distractions, irritation, or even danger. Take for example, a student in a laboratory who needs to communicate effectively with a lab partner without creating a distraction to those trying to work around said student or a soldier on a battlefield who needs to relay information effectively to his or her comrades without revealing his or her position to the enemy. It becomes apparent that people need a more exclusive form of communication in …

Implementing Occupancy Sensor Lighting Controls In Cal Poly Cic Lab Classrooms, Mitchell Packard

Construction Management

Occupancy sensors are lighting control devices that automatically turn lights on when they detect motion, and off when motion is not detected for an allotted time period. These sensors can be applied virtually anywhere, indoor or outdoor, and can provide substantial energy savings. One application that does not utilize occupancy sensors often enough is classrooms. Cal Poly currently utilizes an outdated toggle switch system that students do not maintain properly, wasting a large quantity of energy. This paper will examine the maintaining of the current lighting control system in Cal Poly’s Construction Innovation Center (CIC) lab classrooms; the operating cost …

On The Development Of A One-Time Pad Generator For Personalising Cloud Security, Paul Tobin, Lee Tobin, Michael Mckeever, Jonathan Blackledge

Conference papers

Cloud computing security issues are being reported in newspapers, television, and on the Internet, on a daily basis. Furthermore, in 2013, Edward Snowden alleged backdoors were placed in a number of encryption systems by the National Security Agency causing confidence in public encryption to drop even further. Our solution allows the end-user to add a layer of unbreakable security by encrypting the data locally with a random number generator prior to uploading data to the Cloud. The prototype one-time pad generator is impervious to cryptanalysis because it generates unbreakable random binary sequences from chaos sources initiated from a natural noise. …

Energy Management System Modeling Of Dc Data Center With Hybrid Energy Sources Using Neural Network, Khalid Althomali

Master's Theses

As data centers continue to grow rapidly, engineers will face the greater challenge in finding ways to minimize the cost of powering data centers while improving their reliability. The continuing growth of renewable energy sources such as photovoltaics (PV) system presents an opportunity to reduce the long-term energy cost of data centers and to enhance reliability when used with utility AC power and energy storage. However, the inter-temporal and the intermittency nature of solar energy makes it necessary for the proper coordination and management of these energy sources.

This thesis proposes an energy management system in DC data center using …

Design Of A Community-Supported Capable Microwave System For People With Intellectual And Physical Disabilities, Matteo Zallio, Damon Berry, Paula Kelly, Hicham Rifai, Modestas Jakuska

Conference papers

Product personalisation has become a central topic and expected part of every day life. Different people have different characteristics and abilities and every single user has different needs which means that products have to be tailored accordingly. Micro- wave ovens are one of the most commonly used home appliances. People use them to quickly heat or cook certain foods. Today, according to the US Bureau of Labor Statis- tics, more than 90% of U.S. households own a microwave oven [11]. This project seeks to enable people with intellectual disabilities and physical impairments to perform sim- ple cooking tasks. The target …

Sparsity Based Methods For Target Localization In Multi-Sensor Radar, Haley H. Kim

Dissertations

In this dissertation, several sparsity-based methods for ground moving target indicator (GMTI) radar with multiple-input multiple-output (MIMO) random arrays are proposed. MIMO random arrays are large arrays that employ multiple transmitters and receivers, the positions of the transmitters and the receivers are randomly chosen. Since the resolution of the array depends on the size of the array, MIMO random arrays obtain a high resolution. However, since the positions of the sensors are randomly chosen, the array suffers from large sidelobes which may lead to an increased false alarm probability. The number of sensors of a MIMO random array required to …

Field-Induced Formation And Growth Of Pillars On Films Of Bisphenol-A-Polycarbonate, Yu-Fan Chuang, Jyun-Siang Peng, Fuqian Yang, Donyau Chiang, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

An electric field is used to construct pillars on films of bisphenol-A-polycarbonate (BPAPC) between two parallel electrodes. Both the size and density of the pillars are dependent on the film thickness. For the same experimental conditions, thicker films will lead to the formation of pillars of larger sizes and smaller densities. The time dependence of the average diameter of the pillars is found to be a linear function of the square root of the difference between the annealing time and incubation time. The temperature dependence of the temporal evolution of the pillars follows the Arrhenius relation with an activation enthalpy …

Ocean Renewable Power Company, James Donegan

MARENER 2017

No abstract provided.

The Effect Of The Local Field And Dipole-Dipole Interactions On The Absorption Spectra Of Noble Metals And The Plasmon Resonance Of Their Nanoparticles, I.I. Shaganov, T.S. Perova, Kevin Berwick

Articles

An analysis of the effect of free and bound electrons on the optical properties of noble metals and their nanoparticles is performed, based on the Drude-Lorentz model. It is shown that the shifts in the absorption bands of plasmons localized in spherical nanoparticles with respect to the zero frequency of free electrons in a bulk metal can be estimated using the theory of resonant dipole-dipole interactions. The calculation includes account for differences between the effective and average electromagnetic fields. It is established that the difference in oscillator strength for free electrons in the bulk metal, obtained using the Drude-Lorentz model, …

State-Led Approaches To Electronic Waste Management In The U.S.: A Study Of Stakeholder Involvement In Take-Back Legislation Efficiency, Ashley Elizabeth Westgate

Bard Center for Environmental Policy

Information technology has proliferated over the past two decades, and waste from electronics represents the fastest growing waste stream in the world. The production and disposal of electronics, from cradle to grave, pose critical threats to human health and the environment. The management of electronic, or e-waste, streams poses a particular set of challenges for solid waste management, hazardous waste management, and economic development in the United States. As e-waste accumulates, state governments, municipalities and private landfills are refusing to accept the responsibility for its disposal. To address this problem, the federal and state governments must find a safe and …

Semantic Inference On Clinical Documents: Combining Machine Learning Algorithms With An Inference Engine For Effective Clinical Diagnosis And Treatment, Shuo Yang, Ran Wei, Jingzhi Guo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

Clinical practice calls for reliable diagnosis and optimized treatment. However, human errors in health care remain a severe issue even in industrialized countries. The application of clinical decision support systems (CDSS) casts light on this problem. However, given the great improvement in CDSS over the past several years, challenges to their wide-scale application are still present, including: 1) decision making of CDSS is complicated by the complexity of the data regarding human physiology and pathology, which could render the whole process more time-consuming by loading big data related to patients; and 2) information incompatibility among different health information systems (HIS) …

Qos Recommendation In Cloud Services, Xianrong Zheng, Li Da Xu, Sheng Chai

Information Technology & Decision Sciences Faculty Publications

As cloud computing becomes increasingly popular, cloud providers compete to offer the same or similar services over the Internet. Quality of service (QoS), which describes how well a service is performed, is an important differentiator among functionally equivalent services. It can help a firm to satisfy and win its customers. As a result, how to assist cloud providers to promote their services and cloud consumers to identify services that meet their QoS requirements becomes an important problem. In this paper, we argue for QoS-based cloud service recommendation, and propose a collaborative filtering approach using the Spearman coefficient to recommend cloud …