Electrical and Electronics Commons^™

End-To-End Network Measurement For Wired And Wireless Networks, Khondaker Musfakus Salehin

Dissertations

A number of Internet applications require accurate characterization of different network parameters. There is, therefore, a need to determine whether the networks that carry packets for those applications comply with the requirements. Network measurement provides the means to perform this determination. This work focuses on schemes for measuring several parameters both in wired and wireless environments.

The need of measuring packet processing time (PPT) of the end hosts (i.e., workstations) in a wired network is unveiled. PPT is defined as the time elapsed between the arrival of a packet at the data-link layer and the time when the packet is …

Detection Of Video Frame Insertion Based On Constraint Of Human Visual Perception, Lu Zheng

Theses

Recently, due to availability of inexpensive and easily-operable multimedia tools, digital multimedia technology has experienced drastic advancements. At the same time, video forgery becomes much easier and makes more difficult to validate the video content. Consequently, the origin and integrity of video can no longer be taken for granted. A methodology is developed that is capable of detecting the video frame insertion based on the constraint of human visual perception. The main idea is based on the so-called differential sensitivity. That is, that the variation of brightness of neighboring video frames has some constraint. First, the video sequence is partitioned …

Model Predictive Control For Building Temperature Regulation, Weiqiang Dong

Theses

With the rapid increase in human consumption of energy, global warming is becoming an urgent problem. According to the past research, a significant part of greenhouse gas release and electricity consumption has been connected to buildings. Heating systems are the major contributor to high energy consumption of buildings. Better methods for decreasing energy consumption of buildings should be proposed and applied.

Model predictive control is widely used in building temperature regulation. Each model predictive control has its advantage. Through the comparison of several methods, this thesis discusses their respective features. The combination of a Matlab-based modeling system CVX and model …

Research On Mppt Methods For Photovoltaic System Based On Microgrid, Jingchu Ji

Theses

This thesis introduces some basic concepts about a microgrid. Then it discusses the structure of photovoltaic system (PVS) which contains a solar panel and simplified PV models. Next, it discusses and compares different methods for Maximum Power Point Tracking (MPPT) with PVS. It presents three types of DC-DC converters -- Buck, Boost and Buck-Boost converter. This work proposes to apply a DC-DC converter of Buck-Boost type to make PVS controllable because this type of converter has the largest range for operational region so that it can get the best result on MPPT. Finally, this thesis presents a kind of new …

Spice Netlist Generation For Electrical Parasitic Modeling Of Multi-Chip Power Module Designs, Peter Tucker

Electrical Engineering Undergraduate Honors Theses

Multi-Chip Power Module (MCPM) designs are widely used in the area of power electronics to control multiple power semiconductor devices in a single package. The work described in this thesis is part of a larger ongoing project aimed at designing and implementing a computer aided drafting tool to assist in analysis and optimization of MCPM designs. This thesis work adds to the software tool the ability to export an electrical parasitic model of a power module layout into a SPICE format that can be run through an external SPICE circuit simulator. The code was implemented in python using NetworkX graphs …

Synthesis Of Rhenium And Manganese Pyridazoal Complexes, Jesse Evans

Masters Theses & Specialist Projects

Pyridazines are a heterocyclic aromatic compound containing a characteristic N-N bond that are utilized in many fields, including medicine and electronics. It is this latter field that Dr. Snyder's research group is focused upon. Organometallic compounds are a better conducting material than the current inorganic compounds used in electronics due to better conductance of electricity, lower production cost, and the ability to be formed into thin films. With this in mind, Dr. Snyder's research group has set out to synthesize organometallic compounds for this purpose. Following procedures set forth by Snyder etc, and altered to form an off-metal route, we …

Intermediate Band Solar Cells Based On Inas Quantum Dots Embedded In Ingaas Quantum Well, Ramesh Vasan

Graduate Theses and Dissertations

Intermediate band solar cells based on quantum dots and quantum wells with anti-reflection coating are investigated in this thesis. The demand for high efficient solar cells as an alternate source of energy is the main motivation for this research project. Intermediate band solar cells based on quantum dots were the subject of intensive research in recent years. High power conversion efficiency was predicted from InAs/GaAs intermediate band solar cells as the presence of InAs quantum dots increased the absorption below the band gap of the host material.

In this thesis, an attempt has been made to further increase the absorption …

Modeling And Analysis Of A Dynamic Voltage Regulator, Timothy David Haskell

Master's Theses

Increased government funding and incentives in recent years has led to an increase in the number of grid-tied renewable energy sources as their economic benefits become more renowned. Unfortunately, the outputs of these renewable resources are often highly variable, resulting in undesirable voltage disruptions that are harmful to sensitive loads. In addition to the energy variability of renewable energy sources, random voltage sags, swells and disruptions are already a major issue in power systems. Recent advances in power electronic devices have provided a platform for new solutions to the voltage support problem in power systems. One promising solution is the …

Design And Implementation Of Wireless Point-Of-Care Health Monitoring Systems: Diagnosis For Sleep Disorders And Cardiovascular Diseases, Se Chang Oh

Graduate Theses and Dissertations

Chronic sleep disorders are present in 40 million people in the United States. More than 25 million people remain undiagnosed and untreated, which accounts for over $22 billion in unnecessary healthcare costs. In addition, another major chronic disease is the heart diseases which cause 23.8% of the deaths in the United States. Thus, there is a need for a low cost, reliable, and ubiquitous patient monitoring system. A remote point-of-care system can satisfy this need by providing real time monitoring of the patient's health condition at remote places. However, the currently available POC systems have some drawbacks; the fixed number …

Synthesis And Characterization Of Iron Pyrite Nanocrystals For Photovoltaic Devices, Scott Curtis Mangham

Graduate Theses and Dissertations

Iron pyrite nanocrystals have been synthesized using a hot-injection method with a variety of amines and characterized with properties necessary for photovoltaic devices. The iron pyrite nanocrystals were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, optical absorption, micro-Raman, and micro-Photoluminescence. The optical absorbance spectra showed the large absorption in the visible and near infrared spectral range for the nanocrystals as well as to show the band gap. The face-centered cubic crystal structure of the iron pyrite nanocrystals was shown by matching the measured X-ray diffraction pattern to a face-centered cubic iron pyrite reference pattern. Using Bragg's law …

Synthesis Of Optimized Inp/Zns Core/Shell Nanocrystals And Tio2 Nanotubes For Quantum Dot Sensitized Solar Cells, Seungyong Lee

Graduate Theses and Dissertations

Synthesis of InP/ZnS core/shell nanocrystals and TiO₂ nanotubes and the optimization study to couple them together were explored for quantum dot sensitized solar cells. Its intrinsic nontoxicity makes the direct band gap InP/ZnS core/shell be one of the most promising semiconductor nanocrystals for optoelectric applications, with the advantage of tuning the optical absorption range in the desired solar spectrum region. Highly luminescent and monodisperse InP/ZnS nanocrystals were synthesized in a non-coordinating solvent. By varying the synthesis scheme, different size InP/ZnS nanocrystals with emission peaks ranging from 520 nm to 620 nm were grown. For the purpose of ensuring air …

Secure Localization Topology And Methodology For A Dedicated Automated Highway System, Bhaswati Deka

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In today’s fast-paced world, mobility is a very important factor in improving the quality of living. The purpose of an automated transportation system (ATS) is to provide mobility to one and all, irrespective of their capabilities. An ATS requires a lot of planning to be efficient and safe for public use. One of the main aspects of safety is to determine the location of the individual vehicles within the system and ensure that their location is not posing any hazard to other vehicles in the system or any other entity outside the system. The process of determining or verifying the …

Industrial Wireless Communication System For Notification, Jolica Dias, Devin Semrau, Jumana Abukabbos

Honors Theses

An industrial wireless communication system for short structured messages was needed to support lean manufacturing environments. While first generation prototypes of end devices were previously constructed for the network, it lacked the range, robustness and battery operation desired. The advances made in the new system incorporate multiple small rechargeable user modules that communicate with and through one or more higher powered fixed location message router stations. This configuration ensures that wireless signal integrity is maintained throughout an industrial facility, and that the messages are successfully sent and received. XBee wireless transceivers were imbedded onto the router to enable communication between …

Plug-In Hybrid Vehicle (Phev) Component Pre-Heater, Ria Pereira

Honors Theses

In plug-in hybrid electric vehicles, the optimum temperatures of the cabin and various fluids are achieved through the dissipating heat of the internal combustion engine. In colder climates the initial warm-up of components requires the internal combustion engine to run causing unnecessary consumption of fuel. This project improved the pre-heating system formerly in place. It uses a variety of electric heaters along with the positive temperature coefficient (PTC) heater and blower motor already installed on the vehicle. A system utilizing a microcontroller turns the heaters on and off based on the inputs from the temperature sensors installed on the vehicle. …

Comparative Study Of Artificial Lighting Systems With Different Fixtures Considering Daylight Availability, Leticia Niero Moraes, Anderson Claro

CIBSE & SLL International Lighting Conference, Dublin, 2013

The use of daylight is indicated as a primary factor in energy savings of buildings, since it can reduce the use of electric lighting through control systems. However, the efficiency of systems is also associated with technical characteristics and performance of various elements. The positioning of fixtures, as well as its specifications can contribute for environmental comfort and energy conservation. Such concerns, however, are not part of the currently established practice of lighting design professionals. Considering this gap, this paper seeks to develop a study that addresses the integration of natural and electric light. The methodology is based on evaluating …

Helping To Explain Lighting Quality & Energy Efficiency To Non-Experts, Anna Whittaker, Julie Gore, Stuart Mucklejohn

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International lighting Conference

15 Ways To Save Energy, Iain Macrae

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

In-Field Measurment Of Cylindrical Illuminance And The Impact Of Room Surface Reflectance On The Visual Environment, James Duff

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Energy And Cost Savings By Using Lighting Controls In Offices, Carmen Munoz Munoz, David Moreno, Paula Esquivias, Ignacio Acosta, Jaime Navarro

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Lighting Quality For All, Peter Boyce

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Looking At Art In A New Light, Emrah Baki Ulas, Mirjam Roos

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Retrofit Electrochromic Glazing In An Open Plan Office: A Case Study, Ruth Kelly, Birgit Painter, John Mardaljevic, Katherine Irvine

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Standards And Codes, Peter Raynham

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Rethinking Daylighting And Compliance, John Mardaljevic

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Light Environment In Japanese Office Buildings, Nozomu Yoshizawa, Etsuko Mochizuki,, Toshie Iwata

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference.

Innovations In Light, John Gorse, Mike Simpson

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International Lighting Conference

Biodiesel Reactor Design With Glycerol Separation To Increase Biodiesel Production Yield, Budy Rahmat, Imas Siti Setiasih, Roni Kastaman

Makara Journal of Technology

The study consisted of reactor design used for transesterification process, effect of glycerol separation on transesterification reaction, determination of biodiesel quality, and mass balance analysis. The reactor was designed by integrating circulated pump/stirrer, static mixer, and sprayer that intensify the reaction in the outer tank reactor. The objective was to reduce the use of methanol in excess and to shorten the processing time. The results showed that the reactor that applied the glycerol separation was able to compensate for the decreased use of the reactant methanol from 6:1 to 5:1 molar ratio, and changed the mass balance in the product, …

Development Of Seebeck-Coefficient Measurement Systems Using Kelvin-Probe Force Microscopy, Kazutoshi Miwa, Faiz Salleh, Hiroya Ikeda

Makara Journal of Technology

Thermoelectric device is investigated by a number of researchers in order to enhance the thermoelectric efficiency. It is known that the efficiency can be improved by quantum effect. However, it is difficult to measure the thermoelectric characteristics of nanometer-scale structures. Thus a new measurement method is expected to be developed. We propose to apply Kelvin-probe force microscopy (KFM) to characterization of thermoelectric materials. KFM can locally observe surface potential of Fermi energy of a sample without touching the sample surface. In the present paper, we estimate the Seebeck coefficient of thin Si-on-insulator layers using KFM.

Agricultural Drought Pattern In West Java Using Thermal Vegetation Index From Modis-Terra Satellite, Dini Daruati, Rahmatulloh Rahmatulloh, Sri Hardiyanti Purwadhi

Makara Journal of Technology

This study examines agricultural drought paddy fields in West Java. The aims of this research are to know the pattern and distribution of paddy field drought in West Java and the correlation between drought and the physical characteristics. The agricultural drought is obtained from TVI (Thermal Vegetation Index) model. TVI is derived from MODIS Terra satellite image, which is the ratio between the LST (Land Surface Temperature) and EVI (Enhanced Vegetation Index). Physical factors studied are rainfall, l slope, geomorphology, soil drainage, and irrigation areas. The most severe drought occurred in September 2006 because of El Nino, covering 806,564 ha, …

Estimating Cell Capacity For Multi-Cell Electrical Energy System, Iman Ahari Hashemi

Doctoral Dissertations and Master's Theses

A Multi-Cell Electrical Energy System is a set of batteries that are connected in series. The series batteries provide the required voltage necessary for the contraption. After using the energy that is provided by the batteries, some cells within the system tend to have a lower voltage than the other cells. Also, other factors, such as the number of times a battery has been charged or discharged, how long it has been within the system and many other factors, result in some cells having a lesser capacity compared to the other cells within the system. The outcome is that it …