Electrical and Electronics Commons^™

Poincaré Sphere Representation Of The Fixed-Polarizer Rotating-Retarder Optical System, R. M.A. Azzam

Electrical Engineering Faculty Publications

The trajectory of the polarization state of a monochromatic light beam after it passes through a fixed linear polarizer and a rotating linear retarder of arbitrary retardance Δ is determined on the Poincaré sphere. The three-dimensional figure-8 contour is shown to be the line of intersection of a right-circular cylinder with the sphere. The cylinder is parallel to the polar (s₃) axis, touches the sphere at the equator (at the point that represents the linear polarization transmitted by the fixed polarizer), and has a radius r=sin²(Δ/2). Projections of the trajectory in the coordinate planes of the …

Three-Dimensional Polarization States Of Monochromatic Light Fields, R. M.A. Azzam

Electrical Engineering Faculty Publications

The 3×1 generalized Jones vectors (GJVs) [ExEyEz]t (t indicates the transpose) that describe the linear, circular, and elliptical polarization states of an arbitrary three-dimensional (3-D) monochromatic light field are determined in terms of the geometrical parameters of the 3-D vibration of the time-harmonic electric field. In three dimensions, there are as many distinct linear polarization states as there are points on the surface of a hemisphere, and the number of distinct 3-D circular polarization states equals that of all two-dimensional (2-D) polarization states on the Poincaré sphere, of which only two are circular states. The subset of 3-D polarization …

Development And Prototyping Of A Ground Fault Circuit Interrupter For 3-Phase 480 Volt Systems, Matthew R. Norlander

Master's Theses

Ground Fault Circuit Interrupter (GFCI) technology was first introduced in the NEC in 1971, yet four decades later the technology has not been introduced to a great extent outside of the home environment. This thesis introduces the difficulties encountered in low-voltage three phase ground fault current detection, and adopts a previously patented tripping scheme to develop and prototype a digital relay for 3-phase 480 volt systems capable of the sensitivity and speed required for personnel safety. Results demonstrate the feasibility of the concept and suggest commercial development should be pursued. The prototype is capable of mA sensitivity and reliably detects …

Using Reputation Based Trust To Overcome Malfunctions And Malicious Failures In Electric Power Protection Systems, Jose E. Fadul

Theses and Dissertations

This dissertation advocates the use of reputation-based trust in conjunction with a trust management framework based on network flow techniques to form a trust management toolkit (TMT) for the defense of future Smart Grid enabled electric power grid from both malicious and non-malicious malfunctions. Increases in energy demand have prompted the implementation of Smart Grid technologies within the power grid. Smart Grid technologies enable Internet based communication capabilities within the power grid, but also increase the grid's vulnerability to cyber attacks. The benefits of TMT augmented electric power protection systems include: improved response times, added resilience to malicious and non-malicious …

Critical Information Technology On Fpgas Through Unique Device Specific Keys, Miles E. Mcgee

Theses and Dissertations

Field Programmable Gate Arrays (FPGAs) are being used for military and other sensitive applications, the threat of an adversary attacking these devices is an ever present danger. While having the ability to be reconfigured is helpful for development, it also poses the risk of its hardware design being cloned. Static random access memory (SRAM) FPGA's are the most common type of FPGA used in industry. Every time an SRAM-FPGA is powered up, its configuration must be downloaded. If an adversary is able to obtain that configuration, they can clone sensitive designs to other FPGAs. A technique that can be used …

Low Complexity Feature Extraction For Classification Of Harmonic Signals, Peter William

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this dissertation, feature extraction algorithms have been developed for extraction of characteristic features from harmonic signals. The common theme for all developed algorithms is the simplicity in generating a significant set of features directly from the time domain harmonic signal. The features are a time domain representation of the composite, yet sparse, harmonic signature in the spectral domain.The algorithms are adequate for low-power unattended sensors which perform sensing, feature extraction, and classification in a stand-alone scenario. The first algorithm generates the characteristic features using only the duration between successive zero-crossing intervals. The second algorithm estimates the harmonics’ amplitudes of …

Analysis Of Converter Connected Synchronous Wind Turbines To Grid Disturbances., Joseph Kearney, Michael Conlon, Eugene Coyle

Conference papers

This paper investigates the performance of synchronous generators to grid voltage unbalance and grid faults. A Model of a synchronous generator with a full converter is implemented in the SimPowerSystems toolbox in Matlab/Simulink. Methods to modify the converter control schemes to improve the synchronous generator systems response to grid voltage unbalance and grid faults are investigated. Grid faults including grid voltage unbalance, and line-to-ground faults are introduced into the model at specific times to analyse the performance of the wind generation system. Improvements in the performance of the synchronous generator WECS to the grid disturbances are illustrated.

A Review Of Parallel Operation Of Active Power Filters In The Distributed Generation System, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Conference papers

In this paper a technical review of parallel operation of Active Power Filter (APF) for harmonic power compensation in distributed generation (DG) network has been presented. Controlling methods and connection topologies with their pros and cons are described. Recent improvements in controlling and future trends for the application of APFs in distributed mode are also identified.

Observations Of The Wind Resource Across The Dublin Urban Area, Keith Sunderland, Michael Conlon, Gerald Mills, Rowan Feely

Conference papers

This paper presents an investigation of wind observations made at three (of a network of ten) stations in Dublin. Two of the stations are located over different parts of the urbanized landscape and one is located at Dublin Airport, which exemplifies a typical meteorological station. The purpose of the analysis is to evaluate the nature of the wind resource in the urban area. The potential output of a range of commercially available micro wind turbines at one of the stations is considered. At this location, an anemometer is mounted in a similar manner to international examples of building mounted domestic …

A Further Look At The 'Reactance Of A Parallel Rlc Circuit', Kenneth V. Cartwright, Edit J. Kaminsky

Electrical Engineering Faculty Publications

We show that the maximum impedance of the parallel combination of a resistor R, an inductor L and capacitor C, studied in a previous paper can be found analytically, without using calculus. In fact, we show that the maximum impedance of this parallel combination is just the value of the resistor R and occurs when the driving frequency  is equal to 1/ . o   LC These results were only demonstrated graphically in the aforementioned paper. We also provide PSpice simulations which verify the theoretical predictions.

Development Of A Vibration-Powered Impact Recorder, William Contreras

Theses

Currently, the U.S. Army stores a great deal of equipment for long periods of time. Often, this equipment is subjected to damaging vibrations. Given this, the army wants to be able to monitor the vibrations that are undergone by this equipment. Here, a battery-powered monitoring device would be undesirable because its batteries would need to be replaced. To solve this problem, an energy harvesting, vibration monitoring device has been developed. The device, which is known as a vibration-powered impact recorder (VPIR for short), uses a piezoelectric transducer to power a microcontroller, which uses the power to count the number of …

Orthogonal Space Time Coding For Im/Dd Optical Wireless Communication With Single Carrier Frequency Domain Equalization, Nan Wu

Theses

Recently the development of optical wireless communication has received growing attention because of its unlimited bandwidth and simple implementation as compared to radio frequency communication application for indoor wireless data transmission. The objective of this thesis is to improve the performance of intensity-modulated direct- detection (IM/DD) optical wireless communications with single carrier frequency domain equalization (SCFDE) by using Orthogonal Space Time Code (OSTC). More attention has been paid to three SCFDE schemes due to their outstanding performances in practical cases. It is demonstrated that OSTC can be modified to be suitable to optical systems and provide an excellent enhancement to …

Experimental And Numerical Investigations Of Tubular-Shaped Direct Methanol Fuel Cells (Dmfcs), Travis R. Ward

Master's Theses

This study focuses on both the numerical and experimental investigations of the novel, passively operated, tubular-shaped, Direct Methanol Fuel Cell (DMFC) as an alternative geometry to the traditional planar-shaped fuel cell. The benefit of the tubular geometry compared to the planar geometry is the higher instantaneous volumetric power density provided by the larger active area, which could be beneficial in applications that require a high instantaneous power while occupying a small volume. First, a two-dimensional, two-phase, non-isothermal model was developed to investigate the steady-state performance and design characteristics of a tubular-shaped, passive DMFC. It was found that a higher ambient …

Chaotic Bandgaps In Hybrid Acousto-Optic Feedback And Their Implications, Monish Ranjan Chatterjee, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

The nonlinear dynamics of a hybrid acousto-optic device was examined from the perspective of the Lyapunov exponent (LE) and bifurcation maps. The plots for LE versus system parameters and bifurcation maps have recently been examined against known simulation results including chaotic encryption experiments [1]. It is verified that the "loop gain" (feedback gain (β) times incident light amplitude (Iin) needs to be greater than one as a necessary , but not sufficient condition for the onset of chaos.

It is found that for certain combinations of β, Iin, net bias voltage (αtοt), and the initial value of the first-order scattered …

Does A Link Exist Between Examination Performance And Lecture Attendance For First Year Engineering Students ?, Aidan O'Dwyer

Conference papers

The objective of this study is to examine if a link exists between lecture attendance and examination performance of Level 7, Year 1, Electrical Engineering students at Dublin Institute of Technology in the Electrical Systems subject. Lecture attendance was monitored and analysed over four academic years (2007-8, 2008-9, 2009-10 and 2010-11). The average lecture attendance for students in the three academic years from 2007-10 was 55%, increasing noticeably in the 2009-10 academic year. A statistically significant weakly positive correlation between lecture attendance and examination performance was established. Each 10% increase in student attendance at lectures improved both Module 1 examination …

Constant Conduction Angle Experimental Generation For Rf Power Amplifiers, Michael Spahn

Electrical Engineering

As the demand for more devices to become wireless increases, there is a need for linear, efficient monolithic power amplifiers to deal with the variations in modulation of signals. With partial support from Cal Poly C3RP Grant #52268, this paper explains the implementation of and analyzes a circuit that actively biases a bipolar transistor to operate as a Class C amplifier. The Class C amplifier can maintain constant conduction angle over a range of output powers by using a Class B amplifier to force a scaled DC current vs. input magnitude curve on to a Class C amplifier. The knee …

Foce Medium Voltage Load Switcher, Eric Nelson, Sean Tolibas

Electrical Engineering

No abstract provided.

Accurate Circuit Model For Predicting The Performance Of Lead-Acid Agm Batteries, Wenxin Peng

UNLV Theses, Dissertations, Professional Papers, and Capstones

Energy storage technologies are becoming of great importance in many modern electrical systems. In particular, electrochemical batteries are rapidly gaining wide-spread application in transportation systems as well as in the electric utility sector, where they provide a means to convert non-dispatchable renewable resources into dispatchable generation sources. Hence, accurate battery models are needed during the design stage of such systems to forecast future performance.

A variety of models with a varying degree of complexity and accuracy currently exist that predict battery behavior. In the proposed paper, an existing battery model is modified to account for some battery irregularities while maintaining …

Cyber Physical Complex Networks, Modeling, Analysis, And Control, Neveen Shlayan

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research scrutinize various attributes of complex networks; mainly, modeling, sensing, estimation, safety analysis, and control. In this study, formal languages and finite automata are used for modeling incident management processes. Safety properties are checked in order to verify the system. This method introduces a systematic approach to incident management protocols that are governed by mostly unsystematic algorithms. A portion of the used data in this study is collected by means of radar and loop detectors. A weighted t-statistics methodology is developed in order to validate these detectors. The detector data is then used to extract travel time information where …

Traffic Safety: Modeling, Analysis And Visualization, Puneet Lakhanpal

UNLV Theses, Dissertations, Professional Papers, and Capstones

Traffic Safety has always been one of the major issues of concern in United States. Every year, stringent efforts are made by the national agencies and safety offices to uplift the traffic safety standards and build systems which can guide them in policy making, reducing crashes and routing the financial resources in an optimal direction. This thesis studies the traffic safety from three different angles: modeling, analysis and visualization. In the beginning, these three components are explored in the domain of Injury Severity. Later on, the focus is shifted towards the Traffic Safety related to Safety Belts. Factors and models …

Interview With Adam Boesel, Green Micro Gym, 2011 (Audio), Adam Boesel

All Sustainability History Project Oral Histories

Interview of Adam Boesel by Teresa Celestine at Green Micro Gym Portland, Oregon on July 29th, 2011.

The interview index is available for download.

Wireless Embedded Smart Cameras: Performance Analysis And Their Application To Fall Detection For Eldercare., Alvaro Pinto

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Wireless Embedded Smart Camera Networks has received a lot of attention from academia and industry because they are small in size and easy to deploy, and they offer a multitude of attractive applications. They can be used for embedded single unit applications, or can be networked for multi-camera applications.

We first analyze three different operation scenarios for a wireless vision sensor network wherein different levels of local processing is performed. A detailed quantitative comparison of three operation scenarios are presented in terms of energy consumption and latency. This quantitative analysis provides the motivation for performing high-level local processing and decision …

Miniature Mass Spectrometry: Rf Amplitude Control System Design, Matthew Allen Kirleis

Purdue Polytechnic Masters Theses

This thesis covers the methods used to construct and characterize a custom digital RF amplitude control system. Many types of mass spectrometers exist, but few have been miniaturized as much as the Mini instruments developed at Purdue University. The goal of this research was to improve upon an earlier amplitude control system consisting of analog circuits first implemented in the Mini 11.5 mass spectrometer developed at Purdue University.

A custom set of control and data acquisition electronics were developed for testing the digital and analog control systems in a Mini 11.5 mass spectrometer chassis. A MATLAB Simulink simulation was done …

Simplified Design Of Thin-Film Polarizing Beam Splitter Using Embedded Symmetric Trilayer Stack, R. M.A. Azzam

Electrical Engineering Faculty Publications

An analytically tractable design procedure is presented for a polarizing beam splitter (PBS) that uses frustrated total internal reflection and optical tunneling by a symmetric LHL trilayer thin-film stack embedded in a high-index prism. Considerable simplification arises when the refractive index of the high-index center layer H matches the refractive index of the prism and its thickness is quarter-wave. This leads to a cube design in which zero reflection for the p polarization is achieved at a 45 degrees angle of incidence independent of the thicknesses of the identical symmetric low-index tunnel layers L and L. Arbitrarily high reflectance for …

Off-Grid Public Lighting System – Design And Characterization Of An Led Luminaire, Quanghuy Le

Master's Theses

The technological advances made in the photovoltaic industry have led to a vast exploration of self-sustaining systems.  As the consumer demand for electricity rises from increasing population and development of existing technologies, new practices in system designs are required to relieve the impact on the electrical grid.

This thesis delves into a developing concept of using photovoltaic modules for roadway lighting, with emphasis on establishing the fundamental design for a “spot-lighting” luminaire.  By effectively extinguishing various sections of the luminaire in the absence of pedestrian trafficking, the proposed design and implementation will minimize the prolonged costs, as well as the …

Modeling And Analysis Of The Effects Of Pcb Parasitics On Integrated Dc-Dc Converters, Darwin Domingo Fernandez

Master's Theses

Load transients are prevalent in every electronic device including semiconductor memory, card readers, microprocessors, disc drives, piezoelectric devices, and digitally based systems. They are capable of producing voltage stress, introducing noise, and degrading device functionality. In order to avoid damage to the device, a feedback control loop is implemented with system compensation to regulate the output voltage deviations by the converter. Because designing compensation networks can be rather complicated, DC-DC converters with integrated feedback control topologies help minimize design time and complexity of converter compensation at the expense of design flexibility. This thesis widens the limitations of an integrated DC-DC …

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms.  However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space.  Robust particle damping technology offers a potential solution, driving the need for microgravity characterization.   A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources.  This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

Bridgeless Active Power Factor Correction Using A Current Fed Push Pull Converter, Jeramie Seth Bianchi

Master's Theses

ABSTRACT

Bridgeless Active Power Factor Correction

Using a Current Fed Push Pull Converter

Jeramie Seth Bianchi

Switched Mode Power Supplies have become increasingly popular for efficient methods of delivering power to an assortment of electronic devices. This thesis proposes a method of using a current fed push pull converter to provide active power factor correction and rectification in a single stage. While most AC-DC converters utilize a bridge rectifier to convert AC-DC and then perform DC-DC conversion, the proposed circuit will utilize its output diodes to perform rectification, thus eliminating the need for a bridge rectifier. This circuit will also …

A Frequency-Modulated Continuous Wave-Based Boundary Detection System For Determination Of Monitoring Region For An Indoor Ultra-Wideband Short Range Radar-Based Eldercare Monitoring System, Wilson Tang

Master's Theses

Falls are a cause of concern for the elderly since it can render a person immobile. A monitoring system can summon immediate aid by the automatic detection of fall events. The application of ultra-wideband (UWB) signals for a monitoring system was chosen due to its unique characteristics such as wide spectrum, immunity to interference, penetrability, and application for the detection of people. Part of this monitoring system is boundary detection with the purpose of isolating the location of fall events and to function as a mask to define an area of interest. A study of various localizing methods using measurements …

An Investigation Into Ultrasonic Communication For Near-Body Networks, Eric Joshua Escudero Jr., Gursewak Singh Rai

Electrical Engineering

The following report presents a study of body-area, free-space ultrasonic communication system. Two analog communication systems are investigated. The initial communications system setup relies upon the amplitude modulation (AM) techniques to transmit the signal. Such a system is prone to noise since the amplitude of the signal is directly affected by distance and the signal strength will deteriorate. The secondary communication system involves utilizing frequency modulation (FM). This method avoids the issue of losing information due to amplitude deterioration, but encounters delay issues. The main hardware components used in the approach outlined include ultrasonic transducers (UTs) used for both transmitting …