Electrical and Electronics Commons^™

On-Chip Spiral Inductor/Transformer Design And Modeling For Rf Applications, Ji Chen

Electronic Theses and Dissertations

Passive components are indispensable in the design and development of microchips for high-frequency applications. Inductors in particular are used frequently in radio frequency (RF) IC's such as low-noise amplifiers and oscillators. High performance inductor has become one of the critical components for voltage controlled oscillator (VCO) design, for its quality factor (Q) value directly affects the VCO phase noise. The optimization of inductor layout can improve its performance, but the improvement is limited by selected technology. Inductor performance is bounded by the thin routing metal and small distance from lossy substrate. On the other hand, the in-accurate inductor modeling further …

Design, Analysis And Implementation Of Orthogonal Frequency Coding In Saw Devices Used For Spread Spectrum Tags And Sensors, Derek Puccio

Electronic Theses and Dissertations

SAW based sensors can offer wireless, passive operation in numerous environments and various device embodiments are employed for retrieval of the sensed data information. Single sensor systems can typically use a single carrier frequency and a simple device embodiment, since tagging is not required. In a multi-sensor environment, it is necessary to both identify the sensor and retrieve the sensed information. This dissertation presents the concept of orthogonal frequency coding (OFC) for applications to SAW sensor technology. OFC offers all advantages inherent to spread spectrum communications including enhanced processing gain and lower interrogation power spectral density (PSD). It is shown …

Transmission Lines For Ir Signal Routing, Tasneem Mandviwala

Electronic Theses and Dissertations

In this dissertation, the design, fabrication, and characterization of coplanar striplines, vias, and microstrip lines is investigated, from the point of view of developing interconnections for antenna-coupled infrared detectors operating in the 8- to 12-micron wavelength range. To our knowledge, no previous efforts have been made to study the performance of metallic-wire transmission lines at infrared frequencies. Both the design and fabrication of these structures present unique challenges. Because of attenuation and dispersion issues, the analytical formulas for transmission-line parameters that are valid below a few hundred GHz are not applicable in the infrared. Therefore, numerical modeling was performed to …

Heuristic 3d Reconstruction Of Irregular Spaced Lidar, Nicholas Shorter

Electronic Theses and Dissertations

As more data sources have become abundantly available, an increased interest in 3D reconstruction has emerged in the image processing academic community. Applications for 3D reconstruction of urban and residential buildings consist of urban planning, network planning for mobile communication, tourism information systems, spatial analysis of air pollution and noise nuisance, microclimate investigations, and Geographical Information Systems (GISs). Previous, classical, 3D reconstruction algorithms solely utilized aerial photography. With the advent of LIDAR systems, current algorithms explore using captured LIDAR data as an additional feasible source of information for 3D reconstruction. Preprocessing techniques are proposed for the development of an autonomous …

Next Generation Heterogenous Telemetry Modules, Pierce Brady

Theses

Remote monitoring is used in many applications within the scientific, industrial and commercial communities. These applications can range from the simple monitoring of wind farm generators to the complex behavioural monitoring of a local fox habitat to the simple but extremely urgent monitoring of water depth for a flood prone river. Each application of remote monitoring requires different aspects of the remote monitoring device, but typically, not all these applications can be implemented, as the technologies required for their construction are extremely large, expensive, energy inefficient, slow and do not meet the constraints for the given application.

However with the …

System Identification Of A Pasteurisation Process: A Comparison Of Direct And Indirect Methods, Niel Canty

Theses

The primary focus of this research is to identify a linear model for a direct steam injection (DSI) pasteurisation process which is a component of a large-scale pilot evaporation process widely used in the dairy industry. The pasteurisation process has been identified as a key component of the evaporation process. The author believes that no previously published work has focused on identifying models for a DSI pasteurisation process which makes this work an original contribution to the area. The pasteurisation process can be modelled as a single-input, single-output (SISO) process with a measurable disturbance. Thus two transfer functions were required …

Ultra Wide Band Radar For People Location And Tracking, Julien Le Kernec

Theses

The development of the UWB radar for people location and tracking was motivated by the need for a location and tracking system that performs well indoor. The objectives of the project are:

1. Conduct literature surveys of Ultra Wide Band and Location & Tracking.

2. Determine which UWB pulse is the most suitable for the UWB radar.

3. Design the concept of the UWB radar based on the literature reviews and the UWB pulse chosen.

4. Build an UWB radar prototype.

5. Measurement and Evaluation of the prototype.

This thesis introduces UWB key historical developments and properties; but also, its …

Disappearing User Interface In Ubiquitous Computing: A Pointing And Gesture Sensing System Using An Ultrasonic And Radio Frequency Location Technology, Stephania Yimana Kigadye

Theses

Weiser’s [1] vision of ubiquitous computing presents a different paradigm of computing which attempts to push computers into the background towards invisibility. Therefore “new concepts for human-computer interaction have to be developed when envisioning ubiquitous computing scenarios [1]. Instead of a single screen-based user interface (UI), humans will interact with a number of devices that are distributed and interconnected. These eomputers range from highly personal and mobile applianees to systems that are integrated in everyday environments and are more or less invisible.”[7] As this project suggests, a disappearing user interface in ubiquitous computing can be designed as a gesture recognition …

Chirp Signaling Offers Modulation Scheme For Underwater Communications, Edit J. Kaminsky

Electrical Engineering Faculty Publications

Information contained in the slope of chirp signals can be employed for digital underwater acoustic communications across a broad range of applications.

Fuzzy-Neural Cost Estimation For Engine Tests, Edit J. Kaminsky, Holly Danker-Mcdermott, Freddie Douglas

Electrical Engineering Faculty Publications

This chapter discusses artificial computational intelligence methods as applied to cost prediction. We present the development of a suite of hybrid fuzzy-neural systems for predicting the cost of performing engine tests at NASA’s Stennis Space Center testing facilities. The system is composed of several adaptive network-based fuzzy inference systems (ANFIS), with or without neural subsystems. The output produced by each system in the suite is a rough order of magnitude (ROM) cost estimate for performing the engine test. Basic systems predict cost based solely on raw test data, whereas others use preprocessing of these data, such as principal components and …

A Simple Improvement To The Viterbi And Viterbi Monomial-Based Phase Estimators, Kenneth V. Cartwright, Edit J. Kaminsky

Electrical Engineering Faculty Publications

It is well known that the Viterbi and Viterbi Monomial- Based Phase Estimator, which includes the Mth Power Estimator, performs poorly for cross QAM signals. However, it is shown here that by allowing the power of the monomial to be negative, much improved performance can be realized at medium to high signalto- noise ratios (SNR). Monte Carlo simulations are used to demonstrate the efficacy of this novel simple extension, for 32- and 128-QAM systems. In principle, this extension can also be applied to other constellations, e.g., (4,12)-PSK.

Time-Frequency Methods For Detection And Classification Of Long Buried Targets, Edit J. Kaminsky, Madalina Barbu, Dale Bibee

Electrical Engineering Faculty Publications

No abstract provided.

Performance And Spectral Analysis Of Q2psk And Ce Q2psk Systems In Ideal Bandlimited Channels, Milton I. Quinteros, Edit J. Kaminsky, Kenneth V. Cartwright

Electrical Engineering Faculty Publications

The authors present theoretical performance analysis and simulation results for Quadrature-Quadrature Phase Shift Keying (Q2PSK), Constant Envelope (CE) Q2PSK, and trelliscoded 16D CEQ2PSK in ideal bandlimited channels of various bandwidths. The performance of receivers with and without channel estimation is reported. Spectral analysis is presented for each system, in addition to MSK and expanded uncoded 16D CEQ2PSK. We show that the effects of bandlimiting are most severe for Q2PSK. Knowledge of the channel information aids 4D CEQ2PSK the least. Only 6.8 dB of SNR is needed for the TCM system for a bit error rate of 10−5 for the narrowest …

Wideband Dual Polarized Directional Base Station Antenna, Francisco L. Lerma

Masters

The thesis presents a study of different microwave radiators for wireless applications in the frequency range of 2.2 – 2.5GHz. The performance of microstrip patch antennas and dual polarized dipole antennas were evaluated numerically and experimentally verified. A single microstrip patch and a four- element microstrip array were simulated, fabricated and tested. Simulation was carried out by the finite integration time domain (FITD) method. Polarization diversity is realised using crossed dipoles printed elements. For the crossed dipole elements, two different feed arrangements were studied. Parameters such as return loss, isolation, radiation pattern, gain and bandwidth were measured and found to …