Electrical and Electronics Commons^™

Standalone Wireless Humming Music Synthesizer (Humsynth), Anna Shabrova, Chad Carlson

Electrical Engineering

The HumSynth is a voice controlled music synthesizer. Unlike the commonly found voice modulators on the market, this product uses a vocal input in place of the traditional keyboard interface. This allows the instrument to serve as an intuitive learning tool for those not proficient in music theory. By using their voice, the consumer is able to get a feel for different scales and keys additionally bypassing the physical learning curve of learning a traditional instrument. By the date of submission this project performs basic functions in recreating the pitch input but does not meet the full specs. The enclosure …

Electronic Drum Machine (E.D.M), Nyssa Marie Backes

Electrical Engineering

Many people argue that a drummer plays the most important role in a band of any genre. During live performances, the other band members rely on the drummer to keep the song moving forward at a proper steady pace. Even in recorded music, drums help listeners sing and dance along with their favorite songs. Thus, achieving success as a band, both in terms of recordings and live shows, absolutely requires a drummer. So, if a band does not have a drummer, and cannot afford the hefty cost of hiring a session drummer, a touring drummer, or both, how can they …

Flexible Custom Electric Skateboard, Caleb Adam Kelsay

Electrical Engineering

At Cal Poly traveling long distances only accessible by foot such as across campus or from the car park to class can be tiring and time-consuming. While not physically demanding, the trek consumes time in our tight college life schedule. To improve our time efficiency this project provides a relatively lightweight, powered solution to quickly and effectively travel long distances while maintaining full control and safety even on hills, a current limitation of traditional skateboards.

This electric skateboard includes the battery capacity to travel all around campus on a single charge with a compact and flexible skateboard design that provides …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Dual Method Headphone Amplifier, Joseph S. Gross, Timothy P. Murphy

Electrical Engineering

Many high impedance headphones underperform their full potential when directly connected to the audio source. Amplifiers boost the audio signal and provide the headphones with sufficient power to ensure their maximum performance. The invention of transistors caused vacuum tube implementation to decline, leaving many audiophiles unsatisfied with the transistor’s sound signature. Vacuum tubes and transistors both amplify signals, however the distinct “tube sound” has vanished.

We have designed and created a product where the user selectively switches between solid-state transistor and tube amplification to compare the sound signatures of each amplification method. The ability to switch between the solid-state and …

Wireless Audio Bridge, Daniel L. Hodges

Electrical Engineering

Bluetooth, a wireless technology standard used to exchange data using radio transmissions, has made a significant impact on the audio technology industry, specifically the way people listen to music. This technology enables a wireless listening experience, eliminating the need for wires or cables between audio devices as previously required. Audio can transmit from a cellphone or laptop (an output device) to a pair of headphones or speakers (an input device) without any physical connection. Compared to alternative wireless listening solutions (i.e. FM transmitter, radio broadcast), Bluetooth offers greater reliability, audio fidelity, portability, and ease of use. To obtain this functionality, …

Hybrid Water Pump, Dylan W. Grant, Wei Chen Yeh

Electrical Engineering

This project seeks to use multiple sources to power a water pump. We will design a system which will combine inputs from solar and wind energy production to ensure the pump will have enough power to run. This will create a system powered by clean energy and will be self-sustained once completed. This will theoretically create a more sustainable source of power for the pump than only one of the sources. Because the power sources don’t require outside inputs (aside from sun and wind), the pump can be placed in a remote area. This could be very helpful in developing …

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Automatic Standby Power-Saving Power Strip, Trung Nguyen

Electrical Engineering

The Standby Power Saving Power Strip improves on common power strip functionality. The project reduces the power loss from most electrical devices’ standby power mode, while retaining the convenience of leaving the devices plugged-in. The surge protector automatically recognizes when the plugged-in devices enter standby power mode. Then, it shuts off power to that device and automatically provides power back to the plugged-in devices, when turned on.

General-Purpose Digital Filter Platform, Michael Cheng

Electrical Engineering

This senior project provides a platform for high-speed, general-purpose digital filter implementation. EE 459 currently implements digital filters using reprogrammable digital signal processor boards. These aging digital signal processors serially calculate each difference equation term. Operating at 1 Mega-sample per second, the new general-purpose platform simultaneously processes at least ten digital filtering difference equation coefficients. The platform also features an audio jack input and BNC connectors for viewing input and output signals. The filter digitizes single channel audio signals at 44.1 kHz sampling rate with 16-bit precision or 1 MHz sampling at 8-bit precision. The new reprogrammable platform includes a …

Wireless Window Blinds, Cooper Laone, Niraj Morar, Zachary Malig, Jake Phillips

Electrical Engineering

The Internet of Things asserts that there exists a global need for all objects to connect easily and accessibly. Today, smartphones, tablets, laptops and smart watches makeup just a few of the interconnected devices by the greater population. As a result a growing need for wireless connection between personal devices like phones, and computers to everyday appliances exists. This idea extends directly to households, businesses and buildings, where a growing need for smart home or smart-business appliances has taken root. Many companies like Nest, ADT and Apple make products for automated home security and in home media control. The Wireless …

Adaptive Light Dimmer, Jonathan Sato, William Xiong

Electrical Engineering

This project, the Adaptive Light Dimmer for the DC House, senses a room's light content and adjusts a lamp's light intensity accordingly, thus regulating the room's light content. The device is designed to work with renewable energy sources such as wind and solar energy. This would be useful in less developed countries where AC electricity is not well spread and renewable DC, such as solar, can be better utilized. It functions by using the TSL2561 light sensor to sense light, ATTiny85 microcontroller to output PWM to the LED driver, LT3795 LED driver to output current to an LED and LT3014 …

Music Synthesizer Senior Project: Individual Report, Bryan Bellin

Electrical Engineering

No abstract provided.

Wax Bee Gone: A Safe, Effective Solution To Ear Wax Removal, Robert G. Shenon, Shanvir S. Dhinsa

Electrical Engineering

This project sought to combine conventional methods such as scraping and water pressure to removal ear wax, but with electronic automation to removal the potential for human error as much as possible. Through the use of a 9V battery, and Arduino microcontroller, DC motors, and other circuitry, this project has developed a prototype for a device that can properly remove ear wax without any discomfort or risk to the user. Much of this project involved learning how to properly manipulate and provide the necessary power requirements DC motors from an Arduino and a 9V battery. Additionally, creating a 3D printed …

Student Experimental Farm Smart Pathway Lighting System, Emily A. Whitaker, Vineal S. Singh, Edith Rodriguez

Electrical Engineering

This project works together with the Student Experimental Farm (SEF) and the DC House in order to install a smart lighting pathway system. This system will run off of DC power supplied by the solar panels connected to the DC House. This project tested and explored the group’s abilities to design and implement a full system run off of 48V DC. By installing this system it will greatly improve the ease for students to work at the SEF beyond daylight hours. The system will allow continuous dull lighting and will switch to full brightness once a person is detected. This …

Make Scents: Senior Project Report, Bruce Edward Mitchener Iii, Dennis Tsuker

Electrical Engineering

The purpose of this project was to create a smart air freshener. A complete user-friendly system that is programmable and simple to use for customers of all ages. Many constraints were met in order to achieve the final product and the necessary requirements. This Senior Project helps maintain a clean scented room of any size with its programmable functions to set spray times per the user’s request. Final system incorporates a user operated remote controller that catches the signal using an infrared sensor. The ease and simplicity of this air freshener makes it stand out in the competing market of …

Baserock Bluetooth: Bi-Directional Bluetooth And 3.5 Mm Headphone Jack Compatibility Device, Jonathan A. Falco

Electrical Engineering

This project was proposed by a startup company from downtown San Luis Obispo called BaseRock. BaseRock sells a backpack containing subwoofers to allow the user to feel low frequencies of music. It is intended for concerts or personal use, listening to songs on an MP3. The main way the BaseRock backpack communicates with MP3s is via the headphone jack. With the introduction of the Apple iPhone 7 in September of 2016, BaseRock realized it was at a disadvantage. Millions of iPhone 7 owners and potential customers around the globe would no longer possess a headphone jack. BaseRock needs a Bluetooth-to-headphone …

Portable Dac And Headphone Amplifier For High Impedance Headphones, Kevin V. Thai

Electrical Engineering

The following paper contains an in-depth report on the design process of a portable DAC and Amplifier for high impedance headphones. The project brings portability into an audiophile’s world. This portable DAC and Class D amplifier takes USB data from a phone, converts it to analog, and amplifies the signal for high impedance headphones. First, the document contains motivations for the project: such as the necessity for such equipment, and who would use this product. Next, discussions of marketing considerations and customer needs bring together specifications. After, the report examines the project plan, overall functionality blocks, and estimated costs. Finally, …

Solar Roller - Solar Powered Usb Charging Station, Aaron Bartfeld, Tanner Mjelde, Kaylan Naicker

Electrical Engineering

As the necessity for renewable energy increases, solar power becomes more and more prevalent. At the same time, as technology increases, the necessity for charging one’s electronic devices also increases. The Solar Roller merges solar energy with the ability to charge one's electronic device in one compact cart. The Solar Roller is a solar-powered USB charging station that allows people of all backgrounds to develop a better understanding of alternative fuels, while charging their USB device. It has a touch screen display that provides voltage levels of the battery as well as a TV that displays solar powered information. The …

Microgrid Protection Student Laboratory, Ian Hellman-Wylie, Joey Navarro

Electrical Engineering

To better prepare students for careers in the electric power industry, specifically in the discipline of power system protection, the Electrical Engineering Department at Cal Poly San Luis Obispo proposed an initiative calling for the creation of new laboratory curriculum that uses microprocessor-based relays to give students hands-on experience in the application of protection theory. This report describes the creation of a system that meets this need by providing a laboratory-scale power system that demonstrates the use of common protective relays and protection schemes. This system provides a platform for laboratory coursework using protective relays for transmission line, transformer, and …

Remote Cable Gantry, Allen L. Bailey

Electrical Engineering

The Remote Cable Gantry is a robotic system that was initially intended to aid in the art of aerial videography. It was designed to enable novice and expert users alike to capture both video footage and audio from perspectives unachievable by current methods. This system uses a series of cables to control the position of a camera gimbal in a defined 3D space and, as a self-contained unit, is portable and easy to use. The Remote Cable Gantry offers a quiet, intuitive, and safe alternative to existing technology, which has been limiting the market and potential of aerial photography and …

Music Synthesizer Senior Project: Danalog, Vikrant A. Marathe

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens. The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Danalog: Digital Music Synthesizer, Evan R. Lew

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens.

The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Auxiliary Power System, Karianne Laplante, Nidia Vara, Eve Wassenaar, Carter Whittington

Electrical Engineering

The main objective for this project is to design and build a prototype for an all-electric SUV for the start-up company, Sharpell Technologies. This vehicle will comprise of the following configurations: auxiliary power system (APS), battery management system, battery pack wiring, CAN bus system, DC-DC charging converter, DC/DC auxiliary converter, instrument cluster, and motor controller/inverter. Each car configuration is a project assigned to a 2-4 student team; in total, eight EE senior projects and one ME project is produced. New lightweight batteries are also in the process of being developed to provide a viable electric source for the car. A …

Light Sensing Automated Blinds, Andrew B. Hodges, Ryan C. Flick

Electrical Engineering

This project is solving the problem of wasted energy within buildings and homes, because currently the lights turned on inside building do not utilize natural, ambient light from the sun. Rather than having unnecessary light from a light source, the automated light sensing smart blinds can sense the amount of light outside the window and in the room, and then adjust the angle of the blinds to save energy by utilizing the available outdoor light. This way, the light source will not be running at maximum power output while there is excess light coming through the window. This project aims …

Contactless Charging Adapter, Kevin Nguyen, Emmett Stetz, Joseph Pacheco

Electrical Engineering

Currently, most cell phones utilize wired adapters to charge, which cause a minor hassle when one frequently needs to unplug and replug their device whenever they pick it up to use while it is charging. The charging adapter is a pad that phones can be placed on to wirelessly charge the device. The charging adapter consists of two components: the wireless charging platform to supply and transmit the power, and the wireless charging receiver for phones that do not already have an internal receiver included, specifically targeting newer generation iPhones that utilize a lightning port (i.e. iPhone 5, 6, 6s, …

Active Contact Lens - Low Power Backscattering Sensor-To-Antenna Integration Circuitry, Caleb B. Porter

Electrical Engineering

The Active Contact Lens measures the cornea-scleral radius of the wearer’s eye, which correlates to intraocular pressure (IOP), Glaucoma’s primary indicator. IOP varies throughout the day, and is drastically different from person to person, so constantly measuring it over a period of a few days can provide individualized tracking of the disease’s development and will help doctors develop personalized treatment schedules to treat the disease more precisely.

The Active Contact Lens sensor measures strain, based on the cornea-scleral radius, and reports the results wirelessly, to allow monitoring of an individual’s IOP over time. The lens is powered similarly to a …

Electric Smart Load Meter, Johnny Tran

Electrical Engineering

This project details the design of an electric meter that reads the signals of any device plugged into an outlet and displays cost readings that may potentially reduce power consumption. The sensor monitors whether a plugged in device continuously consumes power after completely charging up. For a charging device, the current remains constant until the device reaches 100% charge. Once the device becomes fully charged, the current discontinues for proper power usage. A unique aspect of the meter is that it displays cost per hour, day, and year. Displaying the cost per unit of time creates awareness for customers, potentially …

Design And Implementation Of A Three Dimensional Printer Using A Cylindrical Printing Process, Brandon Hoy

Electrical Engineering

Many 3D printers utilize a Cartesian (XYZ) printing process. Implementing a polar coordinate printer providing a faster printing method and introduces new printing algorithms, increasing printing efficiency. This cylindrical 3D printer applies a circular-moving baseplate and a heating printer head (extruder) moving radially and vertically. A processor accepts pre-processed polar data points and transpose the appropriate programmed printing commands to the motors units. The extruder also has a control loop, keeping the temperature inside the desired range. This prototype prints using polylactic acid (PLA) filament. Additionally, a display screen updates every second the: printing time, extruder temperature, and status notifications.

Rapid Battery Exchange (Rbx), Daniel Rostom

Electrical Engineering

Electric vehicles have begun to hit the main stream market, with sales raising form under 20,000 in 2001 to over 110,000 per year since 2014 [1]. With new models hitting the market every year, and more people becoming conscious about their fossil fuel usage, this trend will only continue until there are more electric vehicles than combustion vehicles on the road. A major drawback of electric vehicles is their limited range, and relatively long recharge times. Even with advancements in battery charging speed, such as the Tesla super charger, able to provide up to 90 miles of range in just …