Electrical and Electronics Commons^™

Asynchronous Logic Design With Increased Fault Tolerance And Optimized For Subthreshold Operation, Ivan Santos

Open Access Theses & Dissertations

Synchronization has always been an essential feature in electronic circuits, in which functionality is achieved by an appropriate flow of data with respect to time. An ideal concept of logic design would require every operation to happen instantly; however, the application of this principle to electronics is governed by the laws of physics, which influence the time to execute a process. In fact, the speed at which a microprocessor can perform logic operations is determined by the time that charging and discharging capacitive loads requires, and the time that electric signals spend when traveling through the circuitry. Consequently, the variation …

3d Printed Impedance Elements By Micro-Dispensing, Ubaldo Robles Dominguez

Open Access Theses & Dissertations

Micro-dispensing allows electric circuits to be "3D printed," which can be used to give 3D printed systems electronic and electromagnetic functionality. The focus of this thesis is using micro-dispensing to fabricate capacitors and inductors. 3D printed impedance elements are capable of being more easily embedded, can be used to create structural electronics, and will have extensive applications in antennas, metamaterials, frequency selective surfaces, and more. This is the first known effort to print and measure impedance elements by micro-dispensing which holds great potential for manufacturing multi-material devices.

Analysis Of Vehicle Interactions On Interstate Highways: Discrete Choice And Linear System Approaches, Alicia Romo

Open Access Theses & Dissertations

The research in this dissertation developed statistical and linear system models to predict driving behavior according to driver attributes, vehicle characteristics, car-following dynamics and/or driving conditions. The scope of this research was limited to the interaction of two vehicles traveling in the same direction on interstate highways.

The statistical models proposed in this research investigated the contributions of the different vehicle types on the manner and likelihood of collision. Discrete choice models were used to estimate the probability of the types of collision (rear-end, angle and sideswipe) as functions of driver attributes, striking and struck vehicle types, pre-crash driving actions …

Effect Of Hafnium-Incorporation On The Microstructure And Dielectric Properties Of Cobalt Ferrite Ceramics, Stephen Josiah Wells

Open Access Theses & Dissertations

The effect of hafnium ion (Hf⁴⁺) incorporation in cobalt ferrite (CFO) was studied. Samples of Hf substituted CFO ceramic (CoFe_2-xHf_xO₄), were synthesized in the laboratory with hafnium concentrations ranging from x=0.000 to x=0.200. X-ray diffraction scans show that the Hafnium CFO crystalizes in the inverse spinel phase. Inclusion of hafnium causes lattice expansion, increasing the lattice parameter from 8.374 í? for pure CoFe2O4 to 8.391 í? for the highest concentration of hafnium tested (x=0.020). The dielectric properties of CFO are greatly enhanced by inclusion of hafnium. The enhancement is due to the …

Reduced-Order Modeling Using Orthogonal And Bi-Orthogonal Wavelet Transforms, Miguel Hernandez Iv

Open Access Theses & Dissertations

It is well known that model reduction methods borrow techniques typically found in data compression, and current state-of-the-art techniques for data compression are based on the wavelet transform. Given these facts, it is surprising that model reduction using wavelets has not received much attention and has not been adequately addressed in the literature. This research seeks to determine if wavelets can be used for model reduction and if wavelet model reduction is a viable alternative to existing model reduction methods.

In this work we propose a novel method for model reduction using wavelets. Specifically, we introduce techniques for deriving wavelet …

Solar Light Bulb, David G. Guzman, Virgilio Gonzalez

COURI Symposium Abstracts, Summer 2012

The Solar Lighting project is a work driven towards building a low-cost and environmental-friendly solar bulb and to understanding the science behind its behavior. A solar light bulb refers to a device capable of absorbing and transferring solar energy to light up an enclosed area. By using the physical properties of fluids and light is possible to manipulate solar light waves to illuminate an enclosed structure. Moreover, this project attempts to utilize recycled materials that reduce the cost of such device, helping not only the planet but also the costumer’s pocket. The ultimate goal for this project is to scientifically …

Low Power Sigma Delta Converter, Noel P. Martinez, Praveen K. Palakurthi, Eric Macdonald

COURI Symposium Abstracts, Summer 2012

Sub threshold technology allows for circuits to run at their best efficiency with the lowest amount of energy possible. The aim of this research was to combine this technology along with radiation hardness, or the ability for circuits to resist radiation without getting corrupted data. A chip that can convert digital data into analog data (DAC) was created and programmed using verilog, a Hardware Description Language (HDL). With verilog, we created digital data that would eventually be fed into the chip using a field-programmable gate array (FPGA) board. We tested our digital data using a test bench on the computer …

Smart Home Prototype, Logistics & Planning, David G. Guzman^, Virgilio Gonzalez*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Determination Of The Dynamic Behavior Of Subjects With Diabetic Neuropathy, Luis G. Sagarnaga Lopez

Open Access Theses & Dissertations

The diabetic foot is one of the most feared complications of diabetes [3]. Causes of a diabetic foot come from many disorders including diabetic neuropathy, peripheral vascular disease, charcot's neuropathy, foot ulceration, and limb amputation [4]. Statistics have revealed that 8.3 percent of population in the U.S. is affected by diabetes in 2010, i.e., 25.8 million people. About 60 percent to 70 percent of people with diabetes have mild to severe forms of nervous system damage [13]. There is an enormous impact on the physical and mental health of patients who suffer from diabetes.

This research was to determine the …

Numerical Modeling Of Cds/Znxcd1-Xte Solar Cell, Farhana Anwar

Open Access Theses & Dissertations

Device modeling and simulation studies of CdS/ZnxCd1-xTe thin film solar cell have been carried out. A variety of graded band gap structures are examined. Incorporation of back electron reflector layer to improve open circuit voltage and carrier collection of CdTe solar cell was investigated. Device physics and performance determining parameters for different band gap profiles were analyzed. Based on simulation results, an optimal graded band gap structure for CdS/ZnxCd1-xTe solar cell is proposed. Performance of optimally graded band gap cell is superior to that of uniform bandgap cell.

Multi-Physics Modeling Of Induction-Based Additive Manufacturing Of Metals, Danny W. Muse

Open Access Theses & Dissertations

The shift towards 3D printing of functional products has provided a glimpse of the future in terms of manufacturing technologies and the creation of volumetrically complex structures made possible only through these technologies. 3D printing has emerged from the culmination of several technologies covering multiple industries and a myriad of materials. Unlike subtractive technologies such as mills, lathes and CNC machines, where material is removed from a bulk slab or billet to produce a desired part, 3D printing uses an additive layered approach to deposit material based on cross sections of the desired part. Both approaches produce parts based on …

Three-Dimensional Structural Electronic Integration For Small Satellite Fabrication, Cassie Gutierrez

Open Access Theses & Dissertations

The ability to realize truly three-dimensional electronic circuits is complicated if not impossible using traditional fabrication techniques. Such techniques are limited to the use of two dimensional printed circuit boards (PCBs), and require various dissonant processes which exhaust time, volume and cost. Due to the nature of Additive Manufacturing (AM) such problems are diminished and in some ways completely overcome. Additive Manufacturing allows for a higher range of design freedom along conformal surfaces, as well as unit level customization; it is the threshold for embedded electronics, allowing for three-dimensional circuitry in ways traditional fabrication is unfeasible. In such ways, additive …

Investigation Of The Divcon Neuron To Increase The Performance Of A Traditional Feed Forward Multi-Layer Perceptron And Its Hardware Implementation, Jovan Saenz

Open Access Theses & Dissertations

ABSTRACT

Artificial Neural Networks (ANNs) have been developed in an attempt to emulate the information processing capabilities of the biological brain. They offer an alternate computing approach to problems in which mathematical modeling is complicated, such as pattern recognition and pattern classification.

Since ANNs were proposed in the early 1940s, there has been a great amount of research effort dedicated to the development of new models that improve performance. Consequently, different architectures, a variety of activation functions, and distinct learning algorithms have been developed and implemented in different disciplines such as medicine, engineering, and science. In addition, ANNs have been …

Sparse Signal, Image Recovery In Compressive Sensing Technique Through L1 Norm Minimization, Phanendra Koppisetti

Open Access Theses & Dissertations

The classical Shannon Nyquist theorem tells us that, the number of samples required for a signal to reconstruct must be at least twice the bandwidth of the highest frequency for the signal of interest. In fact, this principle is used in all signal processing applications. Unfortunately, in most of the practical cases we end up with far too many samples. In such cases a new sampling method has been developed called Compressive Sensing (CS) or Compressive Sampling, where one can reconstruct certain signals and images from far fewer samples or measurements when compared to that of samples in classical theorem. …

Video Mosaicing Using Inertial Sensors, Arturo Maya Pereyra

Open Access Theses & Dissertations

A method to reduce the process complexity of Video Mosaicing could rely on information concerning the orientation of the camera instead of image feature tracking. Inertial sensors (e.g. accelerometers and gyros) could form part of a low cost motion based technology which can be used in this case and this thesis details an approach for Video Mosaicing based on such technology that requires non-computationally intensive algorithms.

Nanoprobe I-V Characterization Of Cdte/Cds Micro And Nano-Patterned Solar Cells, Heber Prieto

Open Access Theses & Dissertations

This thesis presents a novel way to characterize micro and nano patterned cadmium telluride thin film solar cells via a nano-probe system. A historical review of CdTe-based solar cells is presented first followed by review of the technology developed to produce the patterned CdTe cells. A detailed presentation is then provided on the use of a Zyvex nanoprobing system to characterize the patterned solar cells. The I-V response of micro- and nano-patterned solar cells stimulated under different e-beam conditions is presented and analyzed. Suggestions of how to improve the technique are provided. This work documents, for the first time, the …

A Novel Method For The Curing Of Metal Particle Loaded Conductive Inks And Pastes, David Adrian Roberson

Open Access Theses & Dissertations

The emerging technology of printed microelectronics involving the use of conductive inks in conjunction with standard printing techniques offers a fast and low waste method for creating microelectronics compared with standard manufacturing processes. A clear path to the creation of flexible electronics is present due to the ease of printing on flexible substrates. Moreover, creation of novel 3D structural electronics is possible via the integration of printing technologies and additive manufacturing (AM) techniques.

A key obstacle to the manufacturing of flexible and structural electronics comes from the temperature restrictions imposed by the substrates, which are typically polymeric. This hindrance has …

Control Of A Robotic Prototype Multi-Axis Synergistic System, Julio A. Torres

Open Access Theses & Dissertations

Balance is an ability that every person has and uses in normal daily life, to walk, run, stand, dance, etc. However, there are people who suffer a kind of balance impairment. The Computerized Dynamic Posturography (CDP) is technique in balance rehabilitation, where the patient is asked to stand on a moving platform that is equipped with sensors that measure how well you maintain your balance. In this thesis, a new CDP mechatronic system, the Multi-Axis Synergistic System (MASS), for balance assessment is being developed.

As a first stage and as the objective of this research work the transferable control algorithm …

Psychophysical Similarity Based Feature Selection For Nodule Retrieval In Ct, Ravi K. Samala

Open Access Theses & Dissertations

The emerging paradigms in cancer research indicate the need for a multi-perspective and multi-modal screening approach for early lung cancer diagnosis to increase the probability of clinical resection. Currently no standalone screening methodology is proved to suffice for a clinical diagnosis. Computed tomography has been proved to present abnormality at an early stage with less impact on survival rate in population studies. Nevertheless, because of its non-invasive characteristic, it can be used for diagnosis, prognosis and visualization of tumor. Studies have shown that Computer aided diagnosis (CAD) as a second reader can perform in a similar capacity as a radiologist. …

Mixed-Signal Distributed Feature Extraction For Classification Of Wide-Band Acoustic Signals On Sensor Networks, Humberto Santacruz

Open Access Theses & Dissertations

This thesis proposes a distributed/collaborative scheme for the classification of wide-band acoustic events within the context wireless sensor networks (WSNs). The proposed method is characterized by a mixed-signal processing scheme for the extraction of feature vectors which reduces the processing, memory allocation, and power requirements of the sensor nodes. The mixed-signal scheme assumes that nodes have an analog frontend consisting of a microphone, a bandpass filter, a squaring element and an integrator. This chain of components produces an estimate of the energy over the frequency subband extracted by the filter. The WSN has the ability to form a distributed filter …

An Investigation Into The Effect Of Blood Glucose Level Changes On Lf/Hf Parameter Of Hrv Signal In Non-Diabetic And Diabetic Individuals, Reza M. Amanipour

Open Access Theses & Dissertations

The analysis of time duration between consecutive R waves of electrocardiogram (ECG) is a standard method to evaluate the variations in heart rate. The physiological literature reveals that blood glucose levels modulate the autonomic nervous system (ANS) activity and heart rate variability (HRV) is representative of the cardiovascular autonomic function. In the research, an investigation was carried out to investigate the relationship between HRV signal measures derived from ECG and arterial blood glucose changes in five non-diabetic and five diabetic individuals during normoglycemic and mildly hyperglycemic conditions. A CleveLabs BioCapture wireless device was used to acquire ECG signals from ten …

2d Gaussian Object Motion Detection, Miguel Angel Chaidez

Open Access Theses & Dissertations

Dr. John Moya, and associated research assistants, have previously created an image-change recognition algorithm (JESSE) to mark changes within an image. The focus of this thesis is to present a physical application and modification of this algorithm in order to detect a surgeon's hand and verify chip placement on a printed circuit board.

There are different techniques in implementing visual recognition and motion detection with smart systems but the high cost and complicated calibration of these systems make them impractical. The goal was to create a system that is simple, inexpensive and applicable to multiple applications that will allow the …

Size Dependent Melting And Diffusion Of Silicon For Microsystem Applications, Noel Felipe Marquez

Open Access Theses & Dissertations

The size dependent reduced melting point and hydrogen enhanced surface diffusion effect on silicon nanostructures was explored experimentally. SOI and silicon wafers were patterned using nanimprint lithography and dry etching to explore the reduced melting point effect; and patterned with photolithography and dry etching to explore the hydrogen enhanced surface diffusion. The nanotextured samples were annealed in a wide variety of furnaces with nitrogen, forming gas, and argon atmospheres. Nitrogen was found to block the reshaping effect while argon was found to cause extensive pitting damage in the setup used. Micropatterned samples were annealed in a low pressure hydrogen enabled …

Fabrication And Characterization Of Nanocrystalline Yttrium Oxide Thin Films For Electronic Device Applications, Mudavakkat Vikas Haridas

Open Access Theses & Dissertations

This thesis presents the optimization of growth conditions for fabricating nanocrystalline Yttrium Oxide (Y2O3) thin films on silicon and optical grade, high quality quartz substrates in order to study its structural, optical and electrical properties for electronic device applications.

Commercially Y2O3 has proven to be difficult to fabricate at high quality due to its high temperature growth requirements and the need to alter established fabrication methods for electronic devices. A high temperature requirement for high quality poses a problem for research and analysis. This calls upon for an optimization of the growth conditions to facilitate fabrication of thin films for …

Utepcam: A Scalable Wireless Vision Sensor Architecture For Computational, Power And Bandwidth Constrained Scenarios, Ricardo Zepeda

Open Access Theses & Dissertations

UTEPcam is a low cost and power vision sensor node system. UTEPcam is composed of an Atmel atmega32 8-bit microcontroller, a CY7C09099V static RAM chip, an OV6620 CMOS image sensor, a XBEE transceiver and a SD Flash memory card, and four logic gates. UTEPcam's simple yet efficiently architecture enables it to capture video at one frame per second. At its absolute highest, it is estimated that UTEPcam consumes only 1.321 Amps. When in standby, UTEPcam consumes 21 microamps. Furthermore, UTEPcam's program takes up only 1Kbyte of memory space.

UTEPcam's CPU, a simple 8-bit MCU, is unlike most vision sensor node …

Tin Dioxide Memristors On Glass And Plastic Substrates, Oscar Del Real

Open Access Theses & Dissertations

NanoMIL has studied and developed SnO2-based memristors, while the W.M Keck Center has been a research leader in printed silver inks. The focus of this thesis is to take the previous generation of memristors on glass and develop a process for creating memristors on flexible Kapton film for the first time. Moreover, collaborative work between the two UTEP laboratories produced memristors with printed silver top electrode contacts, also for the first time. These approaches may enable inexpensive flexible memory.

Maturation of the process was achieved by understanding important process parameters and subtle differences between glass and Kapton substrates. Moreover, electrical …

Preparation And Characterization Of Iron Oxide And Hydroxide Based Nanomaterials, Guillermo Carbajal Franco

Open Access Theses & Dissertations

Iron (Fe) oxides and hydroxides are common and abundant materials. They exhibit diverse crystal structures, properties and phenomena by virtue of which they find a wide range of scientific and technological applications. Controlled growth and manipulation of the specific structure and electronic behavior to meet the requirements of a given application is a challenging problem in view of many possible phases and composition of the resulting materials. The preparation method and experimental conditions will, therefore, significantly affect the properties and performance of Fe oxides and hydroxides. The goal of the project is to obtain Fe-based oxide/hydroxide catalytic materials and to …

Spatio-Temporal Cardiac Pacing Sites Localization And Time Varying Pericardium Potential Maps Projection Using Ecg Precordial Leads And A Single Moving Dipole Model, Jaime R. De La Cruz

Open Access Theses & Dissertations

A novel non-invasive method for the spatiotemporal localization of the sites of strongest cardiac activity, and for the creation of time varying Pericardium Potential Maps (PPM), with the use of patients' ECG precordial leads, is proposed in this Thesis study. Compared to previous studies, which analyze electrocardiograms in either time domain or spatial domain, the proposed method has the advantage of a simultaneous spatiotemporal electrocardiograph analysis and a 3-D visualization of pericardium potentials maps, as well as, the pericardium surface polarization patterns during the cardiac cycle. The spatial properties added to the electrocardiogram allow for the analysis of specific regions …

Assessment And Evaluation Of Peripheral Neuropathy From Diabetic Mellitus Using Systems Analysis Approach, Oscar Alonso Espino

Open Access Theses & Dissertations

Currently in America 1 out of every 10 residents suffers from diabetes, and this tendency is likely to grow up to "1 of every 3" by the year [6]. Diabetes exhibits several complications. In 2005, the lead cause of stroke and heart disease was diabetes, 68% of the cases [1]. In 2008, 44% of kidney failure was associated with diabetes [1]. 60 to 70 % of cases of diabetes have a mild to severe nervous system damage [1]. Diabetic patients who have developed peripheral neuropathy tend to also develop foot ulceration. In an advanced stage a foot ulcer can lead …

Accelerated Simulation And Testing Of Integrated Circuits Using High Performance Computing Machines, Matthew C. Markulik

Open Access Theses & Dissertations

As Moore's Law continues to hold true and transistor density becomes exponentially larger the need to rely on computer aided design (CAD) simulators has become more relevant and necessary. As we dive into the age of electronic reliance there presents a need to constantly improve methods to reduce time-to-solution for developing technologies. The reliance on CAD simulators for electronic development leaves engineers with an ability to improve the design process by improving these simulators or improving the methods in which these simulators are being utilized. With the advancement of quality fabrication processes and the ability to operate at sub-threshold levels …