Electrical and Electronics Commons^™

Prototyping A Capacitive Sensing Device For Gesture Recognition, Chenglong Lin

Computer Science and Computer Engineering Undergraduate Honors Theses

Capacitive sensing is a technology that can detect proximity and touch. It can also be utilized to measure position and acceleration of gesture motions. This technology has many applications, such as replacing mechanical buttons in a gaming device interface, detecting respiration rate without direct contact with the skin, and providing gesture sensing capability for rehabilitation devices. In this thesis, an approach to prototype a capacitive gesture sensing device using the Eagle PCB design software is demonstrated. In addition, this paper tested and evaluated the resulting prototype device, validating the effectiveness of the approach.

Synchrophasor-Based Fault Location Detection And Classification, In Power Systems, Using Artificial Intelligence, Hemal Falak

Graduate Theses and Dissertations

With the introduction of sophisticated electronic gadgets which cannot sustain interruption in the provision of electricity, the need to supply uninterrupted and reliable power supply, to the consumers, has become a crucial factor in the present-day world. Therefore, it is customary to correctly identify fault locations in an electrical power network, in order to rectify faults and restore power supply in the minimum possible time. Many automated fault location detection algorithms have been proposed, however, prior art requires topological and physical information of the electrical power network. This thesis presents a new method of detecting fault locations, in transmission as …

Development Of A Rapid Fatigue Life Testing Method For Reliability Assessment Of Flip-Chip Solder Interconnects, Cody Jackson Marbut

Graduate Theses and Dissertations

The underlying physics of failure are critical in assessing the long term reliability of power packages in their intended field applications, yet traditional reliability determination methods are largely inadequate when considering thermomechanical failures. With current reliability determination methods, long test durations, high costs, and a conglomerate of concurrent reliability degrading threat factors make effective understanding of device reliability difficult and expensive. In this work, an alternative reliability testing apparatus and associated protocol was developed to address these concerns; targeting rapid testing times with minimal cost while preserving fatigue life prediction accuracy. Two test stands were fabricated to evaluate device reliability …

Stability Analysis Of A High-Power Microgrid, David Manuel Carballo Rojas

Graduate Theses and Dissertations

The objective of this thesis is to perform the modeling and stability analysis of a high-power microgrid with multiple parallel-and grid connected voltage source converters using the system parameters from the high-power microgrid testbed at the National Center for Reliable Electric Power Transmission (NCREPT) at the University of Arkansas in order to identify, minimize, if not eliminate, the potential instabilities that can affect the proper operation of the microgrid testbed. To achieve this objective, the mathematical modeling of the high-power microgrid considering the adverse effects of resonances due to interactions among the converter LCL output filters is presented and analyzed. …

Fully Analog Laser Driver With Robust Active Feedback Control, John Petrilli

Graduate Theses and Dissertations

The objective of this project was to go through a real life engineering development cycle, document and justify the design choices, and use background experience in electronic design and control systems to implement the best design possible. The laser driver implemented in this project is designed for the general use of a large variety of diodes in continuous wave mode, much like off the shelf laser drivers. The design goals included improving upon off the shelf laser drivers by decreasing steady state error, setting time, response time, and overshoot. Many different feedback control systems were evaluated, and a modified PID …

Properties Of Matter, Mike Jackson, Holly Haney

High School Lesson Plans

Students will investigate the relationship(s) between thermal and electrical properties of matter. First, students will use a multimeter and temperature probe to investigate the relationship between electrical resistance and temperature of an electrical resistor composed of metals. They will then graph collected data to analyze the relationship and draw a conclusion as to their relationship. They will then perform the same investigation on a thermal resistor made of a semiconducting substance and analyze that collected data. Finally, using ClaimEvidence-Reasoning (CER) structure, students will use their experimental evidence to state the similarities and differences between the electro-thermal properties of metals and …

A Folded Cascode Operational Amplifier With Wide-Swing Current Mirrors And High Icmr, Designed With A 1.2-Micron Silicon-Carbide Process, Austin Gattis

Electrical Engineering Undergraduate Honors Theses

This thesis describes in detail the process of designing, simulating, and creating the layout for a modified folded cascode op-amp, fabricated with silicon carbide MOSFETS. The modifications consist of using a wide-swing current mirror to help deal with output voltage issues stemming from high threshold voltages in the silicon carbide process, as well as using a modification that allows for an increased input common mode range. The folded cascode op-amp uses silicon carbide transistors, as it is intended to be used for high temperature applications, ideally in the 25 C - 300 C range. It is designed to have 25 …

Command Validation For Cybersecure Power Router, Isaac M. Kroger

Electrical Engineering Undergraduate Honors Theses

For grid-connected homes equipped with solar panels, power electronics are necessary to manage and convert power between the solar panels, battery storage, grid, and residential load. A power router can be used to manage these power electronics and govern power generation, storage, and distribution within the household. This level of control makes power routers that do not employ cybersecurity a target for external attacks. The use of command validation is an effective way to prevent unauthorized commands from maliciously altering the state of a home’s power router. The purpose of this thesis is to describe the development of the command …

Automatic Testing In The United States Air Force, Pearson Wade

Computer Science and Computer Engineering Undergraduate Honors Theses

The need for standardized Automatic Testing Equipment in the United States Department of Defense has brought about new policies and procedures within entities like the United States Air Force. The diversity and lifespan of systems such as jets, missiles, drones, and other electronics have brought on the need for a new system known as the Versatile Depot Automatic Test Station, or VDATS. The VDATS handles the automatic testing of replaceable digital circuits from different systems. I was introduced to this system firsthand during my time as an intern at Tinker AFB, Oklahoma. This new standardized approach to testing a diverse …

Evaluation Of Terahertz Imaging For Breast Cancer Detection Using Image Morphing, Tanny Andrea Chavez Esparza

Graduate Theses and Dissertations

This thesis proposes the use of a mesh morphing algorithm for the quantitative evaluation of terahertz (THz) images. This work differs from traditional evaluation methods based on qualitative evaluation because it provides a fair and quantitative measurement of the THz imaging system's performance. The objective of the algorithm is to match the alignment, shape, and resolution of the THz and reference pathology images. Therefore, the proposed morphing method provides a pathology reference for a pixel-by-pixel evaluation of the region classification in the THz image. To achieve this, the morphing algorithm aligns the images using the Pearson's correlation coefficient and reshapes …

Developing A Hil-Based Software Platform For Testing Electric And Hybrid Vehicle Powertrains, Daniel Schwartz

Graduate Theses and Dissertations

The objective of this thesis is to present a dynamometer test stand with hardware in the loop (HIL) testing capabilities for the evaluation of electric and hybrid vehicle powertrains under realistic driving conditions. The traction inverter and dc/dc converter are two crucial subsystems of the powertrain and new prototypes require significant validation before implementing into production vehicles. As fundamental technologies such as power modules, thermal management systems, and passive components improve; the performance improvements to the overall system must be demonstrated. The plug and play nature of the testbed makes it ideal for making direct comparisons of design iterations under …

Application Of Modular Multilevel Converters (Mmc) Using Phase-Shifted Pwm And Selective Harmonic Elimination In Distribution Systems, Thouhidul Islam

Graduate Theses and Dissertations

Reducing the size and weight of a power electric system is a prodigious challenge to researchers as the development of the latest technologies emerge in the field of electrical engineering. A similar urge is there to develop a light-weight mobile power substation (MPS) to use in the electric power distribution systems during emergency conditions. This thesis proposes a power electronics based solution using the modular multilevel converter (MMC) topology to design the MPS system. The market-available power semiconductor devices are analyzed and suitable devices are selected to design the system. The phase-shifted pulse width modulation (PS-PWM) and selective harmonic elimination …

Fabrication And Characterization Of Graphene Based 2d Materials For Supercapacitors, Anishkumar Manoharan

Graduate Theses and Dissertations

Supercapacitors have attracted a lot attention due to their efficient energy storage. In comparison to batteries, supercapacitors have high capacitance, energy, and power densities per unit mass than conventional capacitors. Carbon based materials are most promising in supercapacitor application due to their outstanding physical and electrochemical behavior. In this work, a facile method to synthesize a nanocomposite electrode consisting of annealed carbon from carbon ink and MoS2 was demonstrated. Effects of various aqueous and solid electrolytes were studied. It was found that the nanocomposite electrode with 10% MoS2 and 1M Na2SO4 as the aqueous electrolyte tested using the three electrode …

Gating Methods For High-Voltage Silicon Carbide Power Mosfets, Audrey Dearien

Graduate Theses and Dissertations

The objective of this thesis is to assess the challenges associated with driving Silicon Carbide (SiC) power devices, and to compare the potential gate drive methods for these devices which address those challenges. SiC power devices present many benefits that make them suitable for next generation automotive, power utility grid, and energy management applications. High efficiency, increased power density, and reliability at high-temperatures are some of the main benefits of SiC technology. However, the many challenges associated with these devices have prevented their adoption into industry applications. The argument is made in this thesis that the gate driver is a …

Asynchronous 3d (Async3d): Design Methodology And Analysis Of 3d Asynchronous Circuits, Francis Corpuz Sabado

Graduate Theses and Dissertations

This dissertation focuses on the application of 3D integrated circuit (IC) technology on asynchronous logic paradigms, mainly NULL Convention Logic (NCL) and Multi-Threshold NCL (MTNCL). It presents the Async3D tool flow and library for NCL and MTNCL 3D ICs. It also analyzes NCL and MTNCL circuits in 3D IC. Several FIR filter designs were implement in NCL, MTNCL, and synchronous architecture to compare synchronous and asynchronous circuits in 2D and 3D ICs. The designs were normalized based on performance and several metrics were measured for comparison. Area, interconnect length, power consumption, and power density were compared among NCL, MTNCL, and …

Power Interface Design And System Stability Analysis For 400 V Dc-Powered Data Centers, Yuzhi Zhang

Graduate Theses and Dissertations

The demands of high performance cloud computation and internet services have increased in recent decades. These demands have driven the expansion of existing data centers and the construction of new data centers. The high costs of data center downtime are pushing designers to provide high reliability power supplies. Thus, there are significant research questions and challenges to design efficient and environmentally friendly data centers with address increasing energy prices and distributed energy developments.

This dissertation work aims to study and investigate the suitable technologies of power interface and system level configuration for high efficiency and reliable data centers.

A 400 …

Energy-Aware Sparse Sensing Of Spatial-Temporally Correlated Random Fields, Zuoen Wang

Graduate Theses and Dissertations

This dissertation focuses on the development of theories and practices of energy aware sparse sensing schemes of random fields that are correlated in the space and/or time domains. The objective of sparse sensing is to reduce the number of sensing samples in the space and/or time domains, thus reduce the energy consumption and complexity of the sensing system. Both centralized and decentralized sensing schemes are considered in this dissertation.

Firstly we study the problem of energy efficient Level set estimation (LSE) of random fields correlated in time and/or space under a total power constraint. We consider uniform sampling schemes of …

Energy Shaping Control For Stabilization Of Interconnected Voltage Source Converters In Weakly-Connected Ac Microgrid Systems, Nadia Lenora Carmita Smith

Graduate Theses and Dissertations

With the ubiquitous installations of renewable energy resources such as solar and wind, for decentralized power applications across the United States, microgrids are being viewed as an avenue for achieving this goal. Various independent system operators and regional transmission operators such as Southwest Power Pool (SPP), Midcontinent System Operator (MISO), PJM Interconnection and Electric Reliability Council of Texas (ERCOT) manage the transmission and generation systems that host the distributed energy resources (DERs). Voltage source converters typically interconnect the DERs to the utility system and used in High voltage dc (HVDC) systems for transmitting power throughout the United States. A microgrid …

Realization Of A High Power Microgrid Based On Voltage Source Converters, Yusi Liu

Graduate Theses and Dissertations

Microgrid concepts are gradually becoming more popular because they are expected to interface with renewable energies, increase end users’ reliability and resiliency, and promote seamless integration of distributed generators (DG) and energy storage units [1]. Most units are connected through power electronics interfaces, such as ac-dc, dc-dc, and dc-ac converters. The converter design and control are critical to the stability and efficiency of a microgrid.

A microgrid may operate in either gird connected mode or islanded mode [1]. In terms of stability, the grid connected mode is less challenging compared to the islanded mode of operation due to the nearly …

Project Pradio, Trigg T. La Tour

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper examines the design and manufacturing of a device that allows two or more users to share a wireless audio stream. Effectively, this allows a group of people to listen to the same audio in a synchronized manner. The product was unable to be completed in the allotted time. Regardless, significant progress was made and valuable insight into the circuit board design process was gained.

Design Of A Folded Cascode Operational Amplifier In A 1.2 Micron Silicon-Carbide Cmos Process, Kyle Addington

Electrical Engineering Undergraduate Honors Theses

This thesis covers the design of a Folded Cascode CMOS Operational Amplifier (Op-Amp) in Raytheon’s 1.2-micron Silicon Carbide (SiC) process. The use of silicon-carbide as a material for integrated circuits (ICs) is gaining popularity due to its ability to function at high temperatures outside the range of typical silicon ICs. The goal of this design was to create an operational amplifier suitable for use in a high temperature analog-to-digital converter application. The amplifier has been designed to have a DC gain of 50dB, a phase margin of 50 degrees, and a bandwidth of 2 MHz. The circuit’s application includes input …

Investigation Of Fes2 Nanoparticles For Use In Optoelectronic And Thermoelectric Applications, Rick Tefal Eyi Nkoghe

Graduate Theses and Dissertations

Iron pyrite (FeS2) is the most abundant sulfide material on earth. This material has been widely investigated by researchers because of its optical properties. However, it has been difficult to produce High efficiency FeS2 based solar cells. This is due to many different impurities that arise when making the materials. The ability to synthesize pure pyrite FeS2 material is therefore critical for applications.

Pure Iron pyrite nanocrystals were synthesized using hot injection by mixing sulfur with an iron precursor in the presence of an amine. To improve the stability, shorter ligands replaced the native amines ligands. The stability of the …

Channel Estimation Overhead Reduction For Downlink Fdd Massive Mimo Systems, Abderrahmane Mayouche

Graduate Theses and Dissertations

Massive multiple-input multiple-output (MIMO) is the concept of deploying a very large number of antennas at the base stations (BS) of cellular networks. Frequency-division duplexing (FDD) massive MIMO systems in the downlink (DL) suffer significantly from the channel estimation overhead. In this thesis, we propose a minimum mean square error (MMSE)-based channel estimation framework that exploits the spatial correlation between the antennas at the BS to reduce the latter overhead. We investigate how the number of antennas at the BS affects the channel estimation error through analytical and asymptotic analysis. In addition, we derive a lower bound on the spectral …

Smart Gate Driver Design For Silicon (Si) Igbts And Silicon-Carbide (Sic) Mosfets, Abdulaziz Alghanem

Electrical Engineering Undergraduate Honors Theses

The design of an efficient and smart gate driver for a Si IGBT and SiC MOSFET is addressed in thesis. First, the main IGBT parameters are evaluated thoroughly in order to understand their effects in the design of the gate driver. All known consequences of previously designed gate drivers are studied in order to achieve an optimum gate driver. As a result of this assessment, the designer is able to determine whether adding or removing components from the gate driver circuit are beneficial or not. Then, exhaustive research is done to identify suitable integrated circuits to use for the power …

Design Of Smartseat Car Seat Safety System To Prevent Child Vehicular Heat Stroke, Alexis D. Lamott

Electrical Engineering Undergraduate Honors Theses

Child vehicular heatstroke deaths continue to be a preventable accident seen yearly. As such, a proposed safety system has been designed to monitor environmental temperatures and weight in an infant seat, to alert guardians that a young child is at risk of child vehicular heatstroke death or serious heatstroke related injury. The SmartSeat system is comprised of three separate printed circuit boards that work in unison to form the overall system.

High Step-Up/Down Transformerless Multilevel Converter For Renewable Energy Applications, Haider Ghazi Mhiesan

Graduate Theses and Dissertations

This thesis focuses on a high step-up/down transformerless dc-dc modular multilevel converter (MMC) that would be applicable to dc power systems. The design achieves high voltage ratios for interfacing renewable energy sources such as photovoltaic and line interactive Uninterruptible Power System (UPS) systems. The circuit topology provides for high step-up/down dc-dc conversion ratios using an MMC approach operating in resonant mode in order to improve overall efficiency. This topology operates to step-up the input voltage with 1:10 or larger conversion ratio. As a bidirectional converter, it also provides step-down capability at the same voltage ratio (10:1 or greater). The MMC …

Solid-State Transformers For Interfacing Solar Panels To The Power Grid: An Optimum Design Methodology Of A High Frequency Transformer For Dc-Dc Converter Applications, Kenny George

Inquiry: The University of Arkansas Undergraduate Research Journal

Nowadays the use of power electronic interfaces to integrate distributed generation with the power grid is becoming relevant due to the increased penetration of renewable energy sources like solar, and the continued interest to move to a smarter and more robust electric grid. Those interfaces, which also provide a voltage step-up or step-down function, are of particular interest because renewable energy sources do not always have voltages compatible with the connecting grid. Among them, the so-called “power electronic transformer” or “solid-state transformer” (SST) is the focus of significant research. Advantages such as bidirectional power flow, improved system control, reduced size, …

Eeg-Controlling Robotic Car And Alphabetic Display By Support Vector Machine For Aiding Amyotrophic Lateral Sclerosis Patients, Quang M. Le

Electrical Engineering Undergraduate Honors Theses

This thesis presents the design and experiment of a system that can detect the human thinking such as driving directions and letters using the brainwave signals known as electroencephalogram (EEG) and a machine learning algorithm called support vector machine (SVM). This research is motivated by amyotrophic lateral sclerosis (ALS) disease which makes patients seriously lose mobility and speaking capabilities. The developed system in this thesis has three main steps. First, wearing EPOC headset from Emotiv Company, a user can record the EEG signals when he/she is thinking a direction or a letter, and also save the data in a personal …

Epitaxial Growth Of Si-Ge-Sn Alloys For Optoelectronic Device Application, Aboozar Mosleh

Graduate Theses and Dissertations

Microelectronics industry has experienced a tremendous change over the last few decades and has shown that Moore’s law has been followed by doubling the number of transistors on the chip every 18 months. However, continuous scaling down of the transistors size is reaching the physical limits and data transfer through metal interconnects will not be able to catch up with the increasing data processing speed in the future. Therefore, optical data transfer between chips and on-chip has been widely investigated. Silicon based optoelectronics has received phenomenal attention since Si has been the core material on which microelectronic industry has been …

Model Development And Validation For Wind Generation Transmission Systems, Mahmood Shihadeh Saadeh

Graduate Theses and Dissertations

In this research a new benchmark system is proposed for wind energy transmission systems. New model development, validation, and calibration methods for power transmission systems are proposed and implemented as well. First, a model reduction criteria is chosen based on electrical interconnection and geographical information. Model development is then done using reduction techniques on an operation model provided by a transmission operator based on the chosen criteria. Then model validation is performed using actual PMU synchrophasor measurements provided by a utility company. The model development and validation process ensures the accuracy of the developed model and makes for a realistic …