Electrical and Electronics Commons^™

Digital Energy Networks: A Post Occupancy Evaluation And Appraisal Of An Intelligent Low Energy Lighting System, Anthony Colohan, Joseph Teehan, Keith Sunderland, Martin Barrett, James Preston

Conference Papers

The reduction in the electrical power requirements of LED lighting and the coinciding advancements in digital technology have now enabled luminaires to be powered and controlled exclusively over safety extra low voltage (SELV) wiring systems. The implementation of LED luminaires powered via a centralised 48 Volt DC low-latency communication network, with the capability to gather real-time data, has provided the potential to yield considerable electrical energy savings within a building. This paper will present an appraisal of this technology and will examine the technologies potential to make electrical energy savings, improve the quality of lighting and achieve cost savings on …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Accelerated Aging Test On Multiple Xlpe Mv Cables Simultaneously To Induce Water Trees, Shane Conlan, Jane Courtney, Tom Looby

Conference papers

The objective of this paper is to develop an accelerated ageing test to induce water tree growth which is capable of testing up to ten 10 kV cable samples simultaneously. An existing accelerated ageing method was used as a basis for this project. This method uses a high frequency power supply (3 kHz) to achieve a test duration of 14 days. Modifications were made to this method to allow for multiple samples to be tested simultaneously. A specially designed variable inductor was utilised in a parallel RLC resonance circuit. This resonance circuit limits the current draw from a high frequency …

Wind Energy And Ireland: Could Forecasting Errors Lead To A Flawed Market?, Michael Mcdonald, Thomas Woolmington, Keith Sunderland

Conference papers

This paper explores wind energy forecasting consistency by considering the error benchmarks associated with the generation output of a small wind farm in comparison to the national forecasting as provided by Eirgrid, the Irish TSO. This percentage error analysis will contrast the predicted (Eirgrid) capacity and actual wind energy output observations (Wind farm) and postulations that consider alternative prediction metrics are discussed. The findings suggest that in monthly like for like comparisons over a twelve month period, total MWh percentage errors of -0.36% and 5.7% are observed respectively for the actual generation and the forecasted …

Perceived Adequacy Of Illumination, Spatial Brightness, Horizontal Illuminance And Mean Room Surface Exitance In A Small Office, James Duff, Kevin Kelly, Christopher Cuttle

Articles

This paper presents a pilot study that investigated the suitability of mean room surface exitance as a predictor of spatial brightness and perceived adequacy of illumination, and then compared these results with how horizontal illuminance predicted both items under the same conditions. The experiment included 26 participants. A small office was used for the study. It exposed participants to three levels of mean room surface exitance, each delivered with three different light distributions and across three different surface reflectances, resulting in a total of 27 light scenes. A clear relationship existed between mean room surface exitance and both perceived adequacy …

Design Method For Wideband Circularly Polarized Slot Antennas, Adam Narbudowicz, Matthias John, Vit Sipal, Xiulong Bao, Max Ammann

Articles

A compact ultrawideband (UWB) circularly polarized (CP) slot antenna is proposed with a methodology for automated reoptimization for packaging with proprietary devices. The slot structure employs a dual-feed with an integrated compact UWB phase shifter. The design process involves an advanced optimization algorithm and demonstrates the use of spline curves for generation of CP signals. These allow easy optimization, while preserving phase coherency across a wideband. The prototyped antennahas a CP bandwidth of 54% (from 3.2 to 6.1 GHz).

On The Calculation And Measurement Of Mean Room Surface Exitance, James Duff, G. Antonutto, S. Torres

Articles

Cuttle has proposed mean room surface exitance as a metric for use within interior lighting design. Two reported barriers to its use are: a lack of available software to calculate the metric and the tedious and cumbersome nature of recording its values in the field using current equipment and methodologies. This paper presents a method for facilitating the calculation of mean room surface exitance using readily available freeware, namely Radiance, and also presents a methodology that utilises high dynamic range imaging as a pragmatic alternative for field measurement.

Circularly Polarized Solar Antenna For Airborne Communication Nodes, Oisin O’Conchubhair, Adam Narbudowicz, Patrick Mcevoy, Max Ammann

Articles

A circularly polarized solar cell antenna consisting of four sequentially rotated printed inverted-F antennas is proposed. Four multicrystalline silicon solar cells act as the ground plane and the antenna is suitable for low power airborne communication nodes and wireless sensor networks. The antenna design was developed to allow 100% insolation of the cells when directly facing a light source. The low-profile antenna minimises shadowing of the solar cell for oblique angle insolation.

Secondary Re-Use Of Batteries From Electric Vehicles For Building Integrated Photo-Voltaic (Bipv) Applications, Fintan Mcloughlin, Michael Conlon

Reports

PV Crops is evaluating the use of battery technologies such as Vanadium Redox within Building Integrated Photovoltaic (BIPV) applications. However, their inclusion into BIPV systems will inevitably raise the overall costs of such systems. As a result, PV Crops is looking at other measures in parallel to help lower the costs associated with such systems. One particular area of interest is the potential secondary re-use of battery technology from Electric Vehicle (EV) market as a way of mitigating high costs of such systems as well as a means of encouraging battery recycling.

The global installed capacity for Photovoltaic’s (PV) connected …

Integration Of Antenna Array With Multicrystalline Silicon Solar Cell, Oisin O'Conchubhair, Patrick Mcevoy, Max Ammann

Articles

The integration of a low-profile antenna array with a multicrystalline silicon solar cell capable of powering a low-power wireless sensor at 2.45 GHz is reported. Lattice bus bars on the cell are exploited to minimize antenna shadows from low-profile antennas and transmission lines for a higher output power. The dual inverted-F array improves gain, and beam switching enables the array to sweep a wider coverage angle with larger beamwidths compared to other solar integrated antennas.

Lighting Design In Europe: Aligning The Demands For Lower Energy Usage With Better Quality., Kevin Kelly, James Duff

Articles

Lighting design is one of the fastest changing areas in building engineering. It has evolved significantly in recent years due to changing technology and demands for improved quality, better control, reduced energy and sustainability. This paper is an overview of what is happening in Europe and elsewhere and examines the literature to find that latest recommendations in the Code for Lighting issued by the SLL (Society of Light and Lighting) in the UK change previous demands for equal illuminance across a working plane to more specific and demanding criteria. There are recommendations for qualitative metrics and better distribution of light …

Optical Fiber Sensors For Smart Composite Materials And Structures, Manjusha Ramakrishnan, Yuliya Semenova, Gerald Farrell, Ginu Rajan

Books/Book chapters

Composite material structures are widely used in the aerospace, marine, aviation, transport, sport/leisure and civil engineering industries. Such composite material structures are frequently subjected to external perturbations and varying environmental conditions, which may cause the structures to suffer from fatique damage and/or failure, and thus require real-time structural health monitoring (SHM). Of necessity, the diagnosis process and condition monitoring of composite structures are usually carried out during their working life. The goal of such diagnosis is to detect, identify, locate, and assess the defects that my affect the safety or performance of a structure.

Enhanced Quality Of Experience Based On Enriched Network Centric And Access Control Mechanisms, Andreas Roos

Doctoral

In the digital world service provisioning in user satisfying quality has become the goal of any content or network provider. Besides having satisfied and therefore, loyal users, the creation of sustainable revenue streams is the most important issue for network operators [1], [2], [3]. The motivation of this work is to enhance the quality of experience of users when they connect to the Internet, request application services as well as to maintain full service when these users are on the move in WLAN based access networks. In this context, the aspect of additional revenue creation for network operators is considered …

Spatial Brightness, Horizontal Illuminance And Mean Room Surface Exitance In A Lighting Booth, James Duff, Kevin Kelly, C. Cuttle

Articles

This paper presents a pilot study that has investigated the suitability of mean room surface exitance as a predictor of spatial brightness and compared these results with how horizontal illuminance predicts spatial brightness under the same conditions. The experiment took a group of 26 participants and, using a scaled booth, exposed each participant to three levels of mean room surface exitance, each delivered with three different light distributions and three different surface reflectances, resulting in a total of 27 light scenes. Results demonstrated that, under the range of conditions to which participants were exposed, a systematic relationship existed between mean …

Contactless Measurement Of Angular Velocity Using Circularly Polarized Antennas, Vit Sipal, Adam Narbudowicz, Max Ammann

Articles

An innovative method to measure the angular velocity using circularly polarized antennas is proposed. Due to the properties of circular polarization, the angular velocity is frequency modulated (FM) on a wireless carrier. This enables a low-cost precise continuous measurement of angular velocity using a standard FM demodulator. The hardware can be easily adapted for both high and low angular velocity values. The precise alignment angle between the antennas can be determined if the initial antenna orientation is known. The angular error is shown to be

Impact Of Hub Location On The Performance Of Wireless Body Area Networks For Fitness Applications, Vit Sipal, Domenico Gaetano, Patrick Mcevoy, Max Ammann

Articles

This letter compares the propagation properties of Wireless Body Area Networks for three different locations (head, foot and waist) of the hub/internet gateway on the human body. The wireless channels between the hubs and four nodes (chest, back, and upper arms) are measured on a female and a male subject performing push-ups and squats. A framework using spider plots is used for cumulative performance description. The results show that the best overall performance is for hub located on the left temple and the worst overall performance is achieved for a hub on the waist. These results are expected to stimulate …

The Progressive Development Of Turbulence Statistics And Its Impact On Wind Power Predictability, Thomas Woolmington, Keith Sunderland, Jonathan Blackledge, Michael Conlon

Articles

Wind resource assessment is a critical parameter in a diverse range of considerations within the built environment. Engineers and scientists, engaging in building design, energy conservation/application and air-quality/air-pollution control measures, need to be cognisant of how the associated wind resource imposes increased complexities in their design and modelling processes. In this regard, the morphological heterogeneities within these environments, present significant challenges to quantifying the resource and its turbulent characteristics.

This paper presents three aspects of turbulence assessment within the built environment. Firstly, an analysis of how turbulence is currently quantified is considered. The industry standard, Turbulent Intensity (TI) is compared …

Printed Triple-Band Circularly Polarised Antenna For Wireless Systems, Xiulong Bao, Max Ammann

Articles

A triple-band circularly polarised microstrip patch antenna operating in the 2.4, 3.5 and 5.7 GHz bands is presented. The antenna consists of two substrate layers with an electromagnetically coupled low-band patch in the middle layer and a probe-fed dual-band patch on the top layer. The impedance bandwidths (voltage standing wave ratio (VSWR) < 2.5) for the three frequency bands are 112, 118 and 427 MHz with 3 dB axial-ratio bandwidths of 15, 44 and 36 MHz, respectively. The peak gains across the operating bands are 4.2, 5.5 and 4 dBic, respectively.

The Application Of Boundary Layer Climatology And Urban Wind Power Potential In Smarter Electricity Networks, Keith Sunderland, Gerald Mills

Other resources

Smart electricity networks that address energy demand, efficiency and sustainability concerns are predicated on the ability to capture renewable energy in a controllable manner. Such networks will have a particular role in cities, where increasing demand is inevitable but this requires that primary (renewable) energy resources, including that of wind, is better understood. In this paper, the role of wind energy systems, as integral components of a smarter urban electricity network, is considered using a model of the urban wind resourcein Dublin, Ireland that is based on boundary layer theory and meteorological observations. This model is used in conjunction with …

Footwear And Wrist Communication Links Using 2.4 Ghz And Uwb Antennas, Domenico Gaetano, Patrick Mcevoy, Max Ammann, Colm Brannigan, Louise Keating, Frances Horgan

Articles

It is reported that wearable electronic devices are to be used extensively in the next generation of sensors for sports and health monitoring. The information obtained from sensors on the human body depends on the biological parameters, the measurement rate and the number of sensors. The choice of the wireless protocol depends on the required data rates and on system configurations. The communication link quality is achieved with narrowband technologies such as Bluetooth or Zigbee, provided that the number of sensors is small and data rates are low. However, real-time measurements using wideband channels may also be necessary. This paper …

A Remote Capacity Utilization Estimator For Wlans, Yi Ding

Doctoral

In WLANs, the capacity of a node is not fixed and can vary dramatically due to the shared nature of the medium under the IEEE 802.11 MAC mechanism. There are two main methods of capacity estimation in WLANs: Active methods based upon probing packets that consume the bandwidth of the channel and do not scale well. Passive methods based upon analyzing the transmitted packets that avoid the overhead of transmitting probe packets and perform with greater accuracy. Furthermore, passive methods can be implemented locally or remotely. Local passive methods require an additional dissemination mechanism in order to communicate the capacity …

Financial Appraisal Of A Small Scale Wind Turbine With A Case Study In Ireland, Tony Kealy

Articles

This research seeks to evaluate the economic benefits to be gained by installing a small-scale wind turbine for a customer with a three-phase electrical supply requirement. The evidence for the claims made in this paper is obtained by using actual data obtained from the installed equipment over a three year period. The objective is to accurately appraise the financial investment using real data. There appears to be limited studies conducted into this type of research, possibly because the renewable energy sector is in the infancy stage in the host country, Ireland. There are some wind energy installations with financial appraisal …

Real-Time Control Of Shunt Active Power Filter Under Distorted Grid Voltage And Unbalanced Load Condition Using Self Tuning Filter, Samet Biricik, Soydan Redif, Ozgur Ozerdem, Shafiuzzaman K. Khadem, Malabika Basu

Articles

In this paper, an alternative control method is proposed to improve the harmonic suppression efficiency of the active power filter in a distorted and an unbalanced power system to compensate for the perturbations caused by the unbalanced non-linear loads. The proposed method uses a self-tuning filter (STF) to process the grid voltage in order to provide a uniform reference voltage to obtain the correct angular position of the phase locked loop. Moreover, the required compensation currents are obtained by implementing another STF in the transformed set of currents in order to separate the fundamental and the harmonic currents. This allows …

Wind Energy In Ireland - An Analysis Of Percentage Error In Forecasting, Michael Mcdonald

Dissertations

This research aimed to examine the percentage error in forecasting of wind energy using datasets from a small wind farm in Ireland. Furthermore, the study aimed to compare this calculated data to the national forecasting percentage errors. Internationally, the electrical sector and society are undergoing a revolution in terms of 'green economy'. This paradigm shift towards renewable energy technologies is recognised as a priority, with diminution of finite fossil fuels at its core. Renewable energy as a sector has provided significant financial stimulation to global economies in recent years. Moreover, wind energy has provided significant amounts of clean electricity throughout …

Harmonic Power Compensation Capacity Of Shunt Apf And Its Relationship To Design Parameters, Shafiuzzaman Khadem, Malabika Basu, Michael Conlon

Articles

VSI-based three-phase; power exchange mechanism; switching dynamics; three-phase systems; active losses; single-phase systems; power tetrahedron phasor diagram; shunt active power filter; harmonic power compensation capacity; four-wire systems; hysteresis band current control

Footwear Antennas For Body Area Telemetry, Domenico Gaetano, Patrick Mcevoy, Max Ammann, Jacinta Browne, Louise Keating, Frances Horgan

Articles

Antennas designed to link footwear sensors within body centric networks are introduced with two small UWB antennas, one directional and another quasi-omnidirectional. The radiating characteristics are evaluated for three positions on a sample sports shoe using a detailed simulation model and measurements with a homogenous foot phantom. Antenna performance is assessed for resilience to close proximity loading by the footwear materials and the phantom foot.

Non-Negative Matrix Factorization Based Algorithms To Cluster Frequency Basis Functions For Monaural Sound Source Separation., Rajesh Jaiswal

Doctoral

Monophonic sound source separation (SSS) refers to a process that separates out audio signals produced from the individual sound sources in a given acoustic mixture, when the mixture signal is recorded using one microphone or is directly recorded onto one reproduction channel. Many audio applications such as pitch modification and automatic music transcription would benefit from the availability of segregated sound sources from the mixture of audio signals for further processing. Recently, Non-negative matrix factorization (NMF) has found application in monaural audio source separation due to its ability to factorize audio spectrograms into additive part-based basis functions, where the parts …

Small-Scale Wind Turbines: An Appraisal, Tony Kealy

Conference Papers

This research seeks to evaluate the economic benefits to be gained by installing a small-scale wind turbine for a customer with a three-phase electrical supply requirement. The evidence for the claims made in this paper is obtained by using actual data obtained from the installed equipment over a three year period. The objective is to accurately appraise the financial investment using real data. There appears to be limited studies conducted into this type of research, possibly because the renewable energy sector is in the infancy stage in the host country, Ireland. There are some wind energy installations with financial appraisal …

Solar Photovoltaic Water Pumping For Multiple Use Systems (Mus) In Nepal, Fintan Mcloughlin, Aidan Duffy, Michael Conlon

Conference Papers

This paper investigates the performance of five solar photovoltaic (PV) Multiple Use Systems (MUS) used for water pumping. The solar MUS’s provide water for drinking, cleaning and micro-irrigation for some of the poorest communities in Nepal. In the absence of data logging, the performance of each system is investigated based on a series of rules of thumb to determine the predicted, expected and estimated demand and supply of water to small rural communities. The systems are compared based on their technical and economic performance and how this relates to local environmental, physical and socioeconomic characteristics at each location.

Maximising Value Of Electrical Networks For Wave Energy Converter Arrays, Fergus Sharkey, Elva Bannon, Michael Conlon, Kevin Gaughan

Articles

Currently there are the beginnings of a commercial wave energy industry and the ultimate ambition will be to deploy Wave Energy Converters (WECs) in arrays, or wave farms, in a similar fashion to offshore wind. These arrays will require electrical networks to collect and export the generated electrical power to shore and onto the electrical grid. For large scale wind farms the inter-array and export electrical networks can represent more than 20% of the project’s capital expenditure. Submarine power cables account for a large proportion of this cost. The same is expected to be the same for WEC arrays.

This …