Electrical and Electronics Commons^™

Pattern Recognition And Erp Waveform Analysis Using Wavelet Transform, Hong Qi

Dissertations and Theses

Wavelet transform provides an alternative to the classical Short-Time Fourier Transform (STFT). In contrast to the STFT, which uses a single analysis window, the Wavelet Transform uses shorter windows at higher frequencies and longer windows at lower frequencies. For some particular wavelet functions, the local maxima of the wavelet transform correspond to the sharp variation points of the signal. As an application, wavelet transform is introduced to the character recognition. Local maximum of wavelet transform is used as a local feature to describe character boundary. The wavelet method performs well in the presence of noise. The maximum of wavelet transform …

Automatic Tuning Of Integrated Filters Using Neural Networks, Lutz Henning Lenz

Dissertations and Theses

Component values of integrated filters vary considerably due to· manufacturing tolerances and environmental changes. Thus it is of major importance that the components of an integrated filter be electronically tunable. The method explored in this thesis is the transconductance-C-method.

A method of realizing higher-order filters is to use a cascade structure of second-order filters. In this context, a method of tuning second-order filters becomes important.

The research objective of this thesis is to determine if the Neural Network methodology can be used to facilitate the filter tuning process for a second-order filter (realized via the transconductance-C-method). Since this thesis is, …

Unified Bias Analysis Of Subspace-Based Doa Estimation Algorithms, Yang Lu

Dissertations and Theses

This thesis presents the unified bias analysis of subspace-based DOA estimation algorithms in terms of physical parameters such as source separation, signal coherence, number of senors and snapshots. The analysis reveals the direct relationship between the performance of the DOA algorithms and signal measurement conditions. Insights into different algorithms are provided. Based upon previous first-order subspace perturbations, second-order subspace perturbations are developed which provide basis for bias analysis and unification. Simulations verifying the theoretical bias analysis are presented.

Waveform Estimation With Jitter Noise By Pseudo Symmetrical Probability Density Function, Wei-Da Hao

Dissertations and Theses

A new method for solving jitter noise in estimating high frequency waveform is proposed. It reduces the bias of the estimation in those points where all the other methods fail to achieve. It provides preliminary models for estimating percentiles in Normal, Exponential probability density function. Based on the model for Normal probability density function, a model for any probability density function is derived. The resulting percentiles, in turn, are used as estimates for the amplitude of the waveform. Simulation results show us with satisfactory accuracy.

Designing And Simulating A Multistage Sampling Rate Conversion System Using A Set Of Pc Programs, David Joseph Hagerty

Dissertations and Theses

The thesis covers a series of PC programs that we have written that will enable users to easily design FIR linear phase lowpass digital filters and multistage sampling rate conversion systems. The first program is a rewrite of the McClellan-Parks computer program with some slight modifications. The second program uses an algorithm proposed by Rabiner that determines the length of a lowpass digital filter. Rabiner used a formula proposed by Herrmann et al. to initially estimate the filter length in his algorithm. The formula, however, assumes unity gain. We present a modification to the formula so that the gain of …

Exact Modeling Of Time-Interval-Modulated Switched Networks, Weihe Niu

Dissertations and Theses

The frequency response analysis of switched networks plays a very important part in designing various kinds of power converter circuits. In this thesis two frequency response techniques for analyzing switching power converters are discussed. One method provides a mathematical description which treats the converter as a periodic time varying system. A linearized small signal model is subsequently derived. The major part of the thesis concentrates on this accurate exact small-signal technique. The derivation involves state space representation and the use of the time varying transfer function. A Fourier analysis is performed to show the relationship between the frequency response of …

Novel Cylindrical Illuminator Tip For Ultraviolet Light Delivery, Hanqun Shangguan

Dissertations and Theses

The design, processing, and sequential testing of a novel cylindrical diffusing optical fiber tip for ultraviolet light delivery is described. This device has been shown to uniformly(+/- 15%) illuminate angioplasty balloons, 20 mm in length, that are used in an experimental photochemotherapeutic treatment of swine intimal hyperplasia. Our experiments show that uniform diffusing tips of < 400 micron diameter can be reliably constructed for this and other interstitial applications. Modeling results indicate that this design is scalable to smaller diameters. The diffusing tips are made by stripping the protective buffer and etching away the cladding over a length of 20 mm from the fiber tip and replacing it with a thin layer of optical epoxy mixed with A/203 powder. To improve the uniformity and ease of fabrication, we have evaluated a new device configuration where the tip is etched into a modified conical shape, and the distal end face is polished and then coated with an optically opaque epoxy. This is shown to uniformly scatter - 70% of the light launched into the fiber without forward transmission. To our knowledge, we are the first to use this device configuration, and we have achieved a uniform cylindrical pattern of laser energy with uniformity < ± 15% of the average value. A simple computational model suitable for the interpretation of laser energy irradiance along the bare core surface of multimode optical fiber tips is proposed and experimentally verified. The model used is based on geometrical optics and Gaussian approximation. Good agreement is obtained between the calculation and experiment. We have measured the optical properties of the tips through all the sequences of the fabrication. The performances of the diffusing tips for illuminating angioplasty balloons are then evaluated by Ultraviolet Light at 365 nm. A Ti:Sapphire Ring Laser System with a doubling crystal pumped by an argon ion laser is used to generate the wavelength in this study.

Semiconductor P-N Junction Space Charge Region Capacitance, Mohammad Humayun Habib

Dissertations and Theses

The classical capacitance voltage characteristics based on the depletion approximation, is adequate at reverse bias, but introduces errors at high forward bias. Because of its inherent simplicity and compactness this classical depletion model is well studied and widely used in circuit simulators. In this work, a new model for the semiconductor space charge region (SCR) capacitance, based on physical justification, will be derived. This new model takes three input parameters, C0 , Vbi and m, thus eliminating the fitting parameter FC currently used in SPICE. This new model is applicable for any applied voltage and will be compared with the …

Applications Of Digital Signal Processing With Cardiac Pacemakers, Merry Thi Tran

Dissertations and Theses

Because the voltage amplitude of a heart beat is small compared to the amplitude of exponential noise, pacemakers have difficulty registering the responding heart beat immediately after a pacing pulse. This thesis investigates use of digital filters, an inverse filter and a lowpass filter, to eliminate the effects of exponential noise following a pace pulse. The goal was to create a filter which makes recognition of a haversine wave less dependent on natural subsidence of exponential noise.

Research included the design of heart system, pacemaker, pulse generation, and sensor system simulations. The simulation model includes the following components:

• Signal source, …

A Multiple Coupled Microstrip Transmission Line Model For High-Speed Vlsi Interconnect Simulation, Lawrence Stevan Uzelac

Dissertations and Theses

A model is presented which incorporates the advantages of a mixed mode simulation to characterize transmission line behavior in multiple coupled Transmission line systems. The model is intended for use by digital circuit designers who wish to be able to obtain accurate transmission line behavior for complex digital systems for which continuous time simulation tools such as SPICE would be time prohibitive.

The model uses a transverse electromagnetic wave approximation to obtain solutions to the basic transmission line equations. A modal analysis technique is used to solve for the attenuation and propagation constants for the transmission lines. Modal analysis done …

Digital Computer Solution Of Electromagnetic Transients In Large Power Systems, Bijan Navidbakhsh

Dissertations and Theses

This thesis is an introduction to the solution of electromagnetic transients by a combination of the Bergeran method of characteristics and the application of trapezoidal rule of integration.

Three test examples solved by digital computer illustrate the step by step solution and computer programming.

To compare this method with the Laplace transformation technique, a test problem solved by both methods and also digital computer is illustrated. In conclusion, the advantages and disadvantages of both methods are compared.