Electrical and Electronics Commons^™

Flexible Battery-Less Wireless Glucose Monitoring System, Saikat Banerjee, Gymama Slaughter

Bioelectrics Publications

In this work, a low power microcontroller-based near field communication (NFC) interfaced with a flexible abiotic glucose hybrid fuel cell is designed to function as a battery-less glucose sensor. The abiotic glucose fuel cell is fabricated by depositing colloidal platinum (co–Pt) on the anodic region and silver oxide nanoparticles-multiwalled carbon nanotubes (Ag₂O-MWCNTs) composite on the cathodic region. The electrochemical behavior is characterized using cyclic voltammetry and chronoamperometry. This glucose hybrid fuel cell generated an open circuit voltage of 0.46 V, short circuit current density of 0.444 mA/cm2, and maximum power density of 0.062 mW/cm² at 0.26 V …

Assembly Of Alumina Particles In Aqueous Suspensions Induced By High‐Frequency Ac Electric Field, James E. John, Shizhi Qian, Dipankar Ghosh

Mechanical & Aerospace Engineering Faculty Publications

The role of high-frequency alternating current (AC) electric field in the assembly of alumina particles in aqueous media was investigated. Field–particle interactions were in situ investigated for coarse and fine powder particles in very dilute suspensions. For both coarse and fine particles, AC field-induced assembly led to the formation of chains of particles within a minute, which were aligned in the field direction. However, a much finer network of particle chains evolved in fine particle suspensions. Threshold field strength for chain formation was also lower for fine particles (28 V/mm) than for coarse particles (50 V/mm), suggesting stronger interactions for …

Spray Deposition Of Sustainable Plant Based Graphene In Thermosetting Carbon Fiber Laminates For Mechanical, Thermal, And Electrical Properties, Daniel W. Mulqueen, Siavash Sattar, Thienan Le, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Graphene has generated substantial interest as a filler due to its exceptional strength, flexibility, and conductivity but faces obstacles in supply and implementation. A renewable, plant-based graphene nanoparticle (pGNP) presents a more accessible filler with the same properties as mineral graphenes. In this study, we examine the effects of pGNP, which was sprayed on a carbon fiber/epoxy prepreg at loadings from 1.1 to 4.2 g/m². The study considered the mechanical, thermal, and electrical properties of pGNP-composite. An even particle dispersion was achieved using a spray application of pGNP in a water/alcohol suspension with the addition of surfactants and …

Recent Advancements In Electrochemical Conversion Of Carbon Dioxide, Nandan Nag, Amit Kumar, Sumit Sharma, Sandeep Kumar, Amit K. Thakur

Civil & Environmental Engineering Faculty Publications

Electrochemical reduction of carbon dioxide into eco-friendly and clean products is a promising approach to eradicate pollution. Although carbon dioxide emission is inhibited by the advent of renewable sources of energy, it is present in the atmosphere and needs to be cleaned. The reduction of carbon dioxide from atmospheric gases can be accomplished by its adsorption and subsequent transportation to electrolytic chambers, where it is reduced to hydrocarbons, organic acids or carbonates. This review focuses on developing a three compartment electrochemical cell to reduce carbon dioxide used as a catholyte. Various factors affecting the electrochemical reduction of carbon dioxide and …

Protection And Disturbance Mitigation Of Next Generation Shipboard Power Systems, Marounfa Djibo

Electrical & Computer Engineering Theses & Dissertations

Today, thanks to modern advances mainly in the power electronics field, megawatt-level electric drives and magnetic levitation are being integrated into the marine power grids. These technologies operate based on Direct Current (DC) power which require Alternating Current (AC) to DC conversion within the current grid. Medium-voltage Direct Current (MVDC) and Flywheel Energy Storage Systems (FESS) are the next state-of-the-art technologies that researchers are leaning on to produce, convert, store, and distribute power with improved power quality, reliability, and flexibility. On the other hand, with the extensive integration of high-frequency power electronic converters, system stability analysis and the true system …

Assessment Of Cable Length Limit For Effective Protection By Z-Source Circuit Breakers In Dc Power Networks, Ruiyun Fu, Sagar Bhatta, Joseph M. Keller, Yucheng Zhang

Electrical & Computer Engineering Faculty Publications

This paper introduces groundbreaking research on how to assess the Cable Length Limit (CLL) to ensure effective protection by Z-source Circuit Breakers (ZCBs) in DC power networks. It has been revealed that the line parameters of power cables have a significant impact on the cutoff performance of ZCBs. The question of assessing the CLL has been raised as an unsolved problem. In this paper, a method of CLL assessment is proposed based on physical models and simulation tests. To verify the proposed method, two studies were performed to assess the Cable Length Limits depending on fault levels and power delivery …

Charge Transport, Conductivity And Seebeck Coefficient In Pristine And Tcnq Loaded Preferentially Grown Metal Organic Frameworks, Xin Chen, Kai Zhang, Zeinab Mohammed Hassan, Engelbert Redel, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

This investigation on Metal-Organic Framework (MOF) HUKUST-1 films focuses on comparing the undoped pristine state and with the case of doping by TCNQ infiltration of the MOF pore structure. We have determined the temperature dependent charge transport and p-type conductivity for HKUST-1 films. Furthermore, the electrical conductivity and the current-voltage characteristics have been characterized in detail. Because the most common forms of MOFs, bulk MOF powders, do not lend themselves easily to electrical characterization investigations, here in this study the electrical measurements were performed on dense, compact surface-anchored metal-organic framework (SURMOF) films. These monolithic, well-defined, and (001) preferentially oriented MOF …

Electroosmotic Flow Of Viscoelastic Fluid Through A Constriction Microchannel, Jianyu Ji, Shizhi Qian, Zhaohui Liu

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) has been widely used in various biochemical microfluidic applications, many of which use viscoelastic non-Newtonian fluid. This study numerically investigates the EOF of viscoelastic fluid through a 10:1 constriction microfluidic channel connecting two reservoirs on either side. The flow is modelled by the Oldroyd-B (OB) model coupled with the Poisson–Boltzmann model. EOF of polyacrylamide (PAA) solution is studied as a function of the PAA concentration and the applied electric field. In contrast to steady EOF of Newtonian fluid, the EOF of PAA solution becomes unstable when the applied electric field (PAA concentration) exceeds a critical value for …

Three-Event Energy Detection With Adaptive Threshold For Spectrum Sensing In Cognitive Radio Systems, Alexandru Martian, Mahmood Jalal Ahmad Al Sammarraie, Calin Vladeanu, Dimitrie Popescu

Electrical & Computer Engineering Faculty Publications

Implementation of dynamic spectrum access (DSA) in cognitive radio (CR) systems requires the unlicensed secondary users (SU) to implement spectrum sensing to monitor the activity of the licensed primary users (PU). Energy detection (ED) is one of the most widely used methods for spectrum sensing in CR systems, and in this paper we present a novel ED algorithm with an adaptive sensing threshold. The three-event ED (3EED) algorithm for spectrum sensing is considered for which an accurate approximation of the optimal decision threshold that minimizes the decision error probability (DEP) is found using Newton’s method with forced convergence in one …

Quadrupoles For Remote Electrostimulation Incorporating Bipolar Cancellation, Shu Xiao, Ryo Yamada, Carol Zhou

Bioelectrics Publications

Introduction: A method that utilizes nanosecond bipolar cancellation (BPC) near a quadrupole electrodes to suppress a biological response but cancels the distal BPC at the quadrupole center, i.e., cancellation of cancellation (CANCAN), may allow for a remote focused stimulation at the quadrupole center.

Objectives: The primary object of this study was to outline the requirement of the CANCAN implementation and select an effective quadrupole configuration.

Results: We have studied three quadrupole electrode configurations, a rod quadrupole, a plate quadrupole (Plate-Q), and a resistor quadrupole. The pulse shapes of electric fields include monophasic pulses, cancellation pulses, and additive pulses. The Plate-Q …

Generation Of Large-Volume High-Pressure Plasma By Spatiotemporal Control Of Space Charge, Shirshak K. Dhali

Electrical & Computer Engineering Faculty Publications

Any attempt to scale pressure and volume of nonthermal plasma usually leads to instabilities due to the formation of localized space charge. The control of the plasma is limited by the discharge geometry, type of excitation, and gas composition. This article explores the possibility of controlling the space charge in a discharge with a spatially and temporally varying electric field. It is shown that a phase-staggered sinusoidal excitation to a set of conformal azimuthal electrodes in a cylindrical geometry leads to a traveling electric field. Simulations show that in space charge dominated transport, the charged species are dispersed both in …

Multi-Modal Natural Frequency Response Of Utility Transmission Tapered Wood Poles Under Various Soil Foundation Conditions: Natural Frequency Response Under Various Soil Conditions, Ramani Ayakannu, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

Studied herein is the multi-modal natural frequency response of utility transmission tapered wood poles under various soil foundation conditions. Strong winds and hurricanes in various parts of the world have resulted in collapse of such utility poles and have resulted in the disruption of electrical distribution systems in addition to creating hazardous conditions for the public. To avoid the development of resonance under such dynamic loading, the multi-modal natural vibration of the utility poles first needs to be understood in the presence of practical soil foundation conditions. To capture the soil-structure interaction effects on the multi-modal frequencies, a SAP2000 dynamic …

Recent Developments In The Pyscf Program Package, Qiming Sun, Xing Zhang, Samragni Banerjee, Peng Bao, Marc Barbry, Nick S. Blunt, Nikolay A. Bogdanov, George H. Booth, Jia Chen, Zhi-Hao Cui, Janus J. Eriksen, Yang Gao, Sheng Gun, Jan Hermann, Matthew R. Hermes, Kevin Koh, Peter Koval, Susi Lehtola, Zhendong Li, Junzi Liu, Narbe Mardirossian, James D. Mcclain, Mario Motta, Bastien Mussard, Hung Q. Pham, Artem Pulkin, Wirawan Purwanto, Paul J. Robinson, Enrico Ronca, Elvira R. Sayfutyarova, Maximillian Scheurer, Henry F. Schurkus, James E.T. Smith, Chong Sun, Shi-Ning Sun, Shiv Upadhyay, Lucas K. Wagner, Xiao Wang, Alec White, James Daniel Whitfield, Mark J. Williamson, Sebastian Wouters, Jun Yang, Jason M. Yu, Tianyu Zhu, Timothy C. Berkelbach, Sandeep Sharma, Alexander Yu Sokolov, Garnet Kin-Lic Chan

University Administration Publications

PySCF is a Python-based general-purpose electronic structure platform that supports first-principles simulations of molecules and solids as well as accelerates the development of new methodology and complex computational workflows. This paper explains the design and philosophy behind PySCF that enables it to meet these twin objectives. With several case studies, we show how users can easily implement their own methods using PySCF as a development environment. We then summarize the capabilities of PySCF for molecular and solid-state simulations. Finally, we describe the growing ecosystem of projects that use PySCF across the domains of quantum chemistry, materials science, machine learning, and …

Iomt Malware Detection Approaches: Analysis And Research Challenges, Mohammad Wazid, Ashok Kumar Das, Joel J.P.C. Rodrigues, Sachin Shetty, Youngho Park

VMASC Publications

The advancement in Information and Communications Technology (ICT) has changed the entire paradigm of computing. Because of such advancement, we have new types of computing and communication environments, for example, Internet of Things (IoT) that is a collection of smart IoT devices. The Internet of Medical Things (IoMT) is a specific type of IoT communication environment which deals with communication through the smart healthcare (medical) devices. Though IoT communication environment facilitates and supports our day-to-day activities, but at the same time it has also certain drawbacks as it suffers from several security and privacy issues, such as replay, man-in-the-middle, impersonation, …

Compact -300 Kv Dc Inverted Insulator Photogun With Biased Anode And Alkali-Antimonide Photocathode, C. Hernandez-Garcia, P. Adderley, B. Bullard, J. Benesch, J. Grames, J. Gubeli, F. Hannon, J. Hansknecht, J. Jordan, R. Kazimi, G. A. Krafft, M. A. Mamun, M. Poelker, M. L. Stutzman, R. Suleiman, M. Tiefenback, Y. Wang, S. Zhang, H. Baumgart, G. Palacios-Serrano, S. Wijethunga, J. Yoskowitz, C. A. Valerio Lizarraga, R. Montoya Soto, A. Canales Ramos

Electrical & Computer Engineering Faculty Publications

This contribution describes the latest milestones of a multiyear program to build and operate a compact −300  kV dc high voltage photogun with inverted insulator geometry and alkali-antimonide photocathodes. Photocathode thermal emittance measurements and quantum efficiency charge lifetime measurements at average current up to 4.5 mA are presented, as well as an innovative implementation of ion generation and tracking simulations to explain the benefits of a biased anode to repel beam line ions from the anode-cathode gap, to dramatically improve the operating lifetime of the photogun and eliminate the occurrence of micro-arc discharges.

Ignition Of A Plasma Discharge Inside An Electrodeless Chamber: Methods And Characteristics, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

In this paper the generation and diagnostics of a reduced pressure (300 mTorr to 3 Torr) plasma generated inside an electrodeless containment vessel/chamber are presented. The plasma is ignited by a guided ionization wave emitted by a low temperature pulsed plasma jet. The diagnostics techniques include Intensified Charge Coupled Device (ICCD) imaging, emission spectroscopy, and Langmuir probe. The reduced-pressure discharge parameters measured are the magnitude of the electric field, the plasma electron number density and temperature, and discharge expansion speed.

Performance Evaluation Of Communication Technologies And Network Structure For Smart Grid Applications, Desong Bian, Murat Kuzlu, Manisa Pipattanasomporn, Saifur Rahman, Di Shi

Engineering Technology Faculty Publications

The design of an effective and reliable communication network supporting smart grid applications requires the selection of appropriate communication technologies and protocols. The objective of this study is to study and quantify the capabilities of an advanced metring infrastructure (AMI) to support the simultaneous operation of major smart grid functions. These include smart metring, price-induced controls, distribution automation, demand response, and electric vehicle charging/discharging applications in terms of throughput and latency. OPNET is used to simulate the performance of selected communication technologies and protocols. Research findings indicate that smart grid applications can operate simultaneously by piggybacking on an existing AMI …

Wireless Sensor Networks For Smart Communications, Mu Zhou, Qilian Liang, Hongyi Wu, Weixiao Meng, Kunjie Xu

Electrical & Computer Engineering Faculty Publications

(First paragraph) In the first edition of the special issue titled “Wireless Sensor Networks for Smart Communications”, a total of 22 manuscripts were received and 6 of these were accepted. This issue demonstrated that network congestion, user mobility, and adjacent spectrum interference are the main reasons for the degradation ofcommunication quality inWireless Sensor Networks (WSNs).

Hydrophobic Surface Modification Of Polymethyl Methacrylate By Two-Dimensional Plasma Jet Array At Atmospheric Pressure, Feng Liu, Meiling Cai, Bo Zhang, Zhi Fang, Chunqi Jiang, Kostya Ken Ostrikov

Bioelectrics Publications

Recently developed atmospheric pressure plasma jet (APPJ) is considered as a novel and efficient technique for uneven surfaces processing and APPJ array effectively expands the treatment area of a single APPJ. In this paper, a two-dimensional (2D) APPJ array in Ar/tetramethylsilane (TMS) is used to improve the surface hydrophobicity of polymethyl methacrylate (PMMA) by depositing polymerized silicalike clusters on the jet-PMMA interface. The electrical and optical characteristics of the 2D Ar/TMS APPJ array are measured to optimize experimental conditions. The wettability of jet-PMMA interface is assessed by measuring water contact angle, which increases from 65° to a maximum value of …

Core And Uncore Joint Frequency Scaling Strategy, Vaibhav Sundriyal, Masha Sosonkina, Bryce Westheimer, Mark Gordon

Electrical & Computer Engineering Faculty Publications

Energy-proportional computing is one of the foremost constraints in the design of next generation exascale systems. These systems must have a very high FLOP-per-watt ratio to be sustainable, which requires tremendous improvements in power efficiency for modern computing systems. This paper focuses on the processor—as still the biggest contributor to the power usage—by considering both its core and uncore power subsystems. The uncore describes those processor functions that are not handled by the core, such as L3 cache and on-chip interconnect, and contributes significantly to the total system power. The uncore frequency scaling (UFS) capability has been available to the …

Electrowetting Using A Microfluidic Kelvin Water Dropper, Elias Yazdanshenas, Qiang Tang, Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

The Kelvin water dropper is an electrostatic generator that can generate high voltage electricity through water dripping. A conventional Kelvin water dropper converts the gravitational potential energy of water into electricity. Due to its low current output, Kelvin water droppers can only be used in limited cases that demand high voltage. In the present study, microfluidic Kelvin water droppers (MKWDs) were built in house to demonstrate a low-cost but accurately controlled miniature device for high voltage generation. The performance of the MKWDs was characterized using different channel diameters and flow rates. The best performed MKWD was then used to conduct …

Cryogenic Probe Station At Old Dominion University Center For Accelerator Science, Junki Makita, Jean R. Delayen, Alex Gurevich, Gianluigi Ciovati

Physics Faculty Publications

With a growing effort in research and development of an alternative material to bulk Nb for a superconducting radiofrequency (SRF) cavity, it is important to have a cost effective method to benchmark new materials of choice. At Old Dominion University's Center for Accelerator Science, a cryogenic probe station (CPS) will be used to measure the response of superconductor samples under RF fields. The setup consists of a closed-cycle refrigerator for cooling a sample wafer to a cryogenic temperature, a superconducting magnet providing a field parallel to the sample, and DC probes in addition to RF probes. The RF probes will …

A Correlational Study Of Sansec Sensors’ Electric Field Distribution On Lightning Attachment, Kayla M. Farrow

Electrical & Computer Engineering Theses & Dissertations

Old Dominion University and the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) Aviation Safety Program Atmospheric Environmental Safety Technologies Project team conducted research in using SansEC (Sans Electric Connection) sensors to provide lightning strike protection (LSP) and damage mitigation for composite aircraft. SansEC sensors are simplistic devices consisting of an open circuit conductive trace, shaped in a planar geometric spiral [1], [2], [3]. SansEC sensors can be designed in various shapes and sizes depending on the application. For applications on exterior aircraft surfaces, the sensor must be designed to perform the required lightning strike protection [1], [3]. …

Nanostructure Evolution Of Magnetron Sputtered Hydrogenated Silicon Thin Films, Dipendra Adhikari, Maxwell M. Junda, Sylvain X. Marsillac, Robert W. Collins, Nikolas J. Podraza

Electrical & Computer Engineering Faculty Publications

Hydrogenated silicon (Si:H) thin films have been prepared by radio frequency (RF) magnetron sputtering. The effect of hydrogen gas concentration during sputtering on the resultant film structural and optical properties has been investigated by real time spectroscopic ellipsometry (RTSE) and grazing incidence x-ray diffraction (GIXRD). The analysis of in-situ RTSE data collected during sputter deposition tracks the evolution of surface roughness and film bulk layer thickness with time. Growth evolution diagrams depicting amorphous, nanocrystalline and mixed-phase regions for low and high deposition rate Si:H are constructed and the effects of process parameter (hydrogen gas concentration, total pressure and RF power) …

Impact Of Rram Read Fluctuations On The Program-Verify Approach, David M. Nminibapiel, Dmitry Veksler, J.-H. Kim, Pragya R. Shrestha, Jason P. Campbell, Jason T. Ryan, Helmut Baumgart, Kin P. Cheung

Electrical & Computer Engineering Faculty Publications

The stochastic nature of the conductive filaments in oxide-based resistive memory (RRAM) represents a sizeable impediment to commercialization. As such, program-verify methodologies are highly alluring. However, it was recently shown that program-verify methods are unworkable due to strong resistance state relaxation after SET/RESET programming. In this paper, we demonstrate that resistance state relaxation is not the main culprit. Instead, it is fluctuation-induced false-reading (triggering) that defeats the program-verify method, producing a large distribution tail immediately after programming. The fluctuation impact on the verify mechanism has serious implications on the overall write/erase speed of RRAM.

A Study Of The Sensitivity Of Energy Conversion Efficiency To Load Variation In Class-E Resonant Power Inverter, Richard Samuel Jennings

Electrical & Computer Engineering Theses & Dissertations

In this thesis the sensitivity of energy conversion efficiency (ECE) and output power of a class-E resonant inverter under variable resistive and inductive load assignments is examined for wireless power transfer (WPT) applications. By performing simulation and mathematical analysis, it was found that the on-resistance of the switching device has minor effect on the design’s efficiency. Additional comparisons between the simulation and mathematical analysis show reasonable output power and ECE load variation performance for the design, but with unique load impedances where zero voltage switching (ZVS) and zero derivative switching (ZDS) are achieved. These comparisons also expose inaccurate mathematical assumptions. …

Study Of A High-Efficient Wide-Bandgap Dc-Dc Power Converter For Solar Power Integration, Yashwanth Bezawada

Electrical & Computer Engineering Theses & Dissertations

This research focuses on the design and analysis of a Boost cascaded Buck-Boost (BoCBB) power converter with super high efficiency in electric power conversion. The BoCBB power converter is based on emerging wide-bandgap silicon-carbide (SiC) MOSFETs and Schottky diodes, which have only 1/6 times of power loss in traditional silicon power semiconductor devices. The BoCBB power converter can be widely applied in solar harvesting for the National Aeronautics and Space Administration (NASA), military bases and electric utilities, as well as high-power DC motor drives for the electric vehicles, robotics, and manufacturing and product lines.

This research analyzed the topology and …

Semantic Inference On Clinical Documents: Combining Machine Learning Algorithms With An Inference Engine For Effective Clinical Diagnosis And Treatment, Shuo Yang, Ran Wei, Jingzhi Guo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

Clinical practice calls for reliable diagnosis and optimized treatment. However, human errors in health care remain a severe issue even in industrialized countries. The application of clinical decision support systems (CDSS) casts light on this problem. However, given the great improvement in CDSS over the past several years, challenges to their wide-scale application are still present, including: 1) decision making of CDSS is complicated by the complexity of the data regarding human physiology and pathology, which could render the whole process more time-consuming by loading big data related to patients; and 2) information incompatibility among different health information systems (HIS) …

Qos Recommendation In Cloud Services, Xianrong Zheng, Li Da Xu, Sheng Chai

Information Technology & Decision Sciences Faculty Publications

As cloud computing becomes increasingly popular, cloud providers compete to offer the same or similar services over the Internet. Quality of service (QoS), which describes how well a service is performed, is an important differentiator among functionally equivalent services. It can help a firm to satisfy and win its customers. As a result, how to assist cloud providers to promote their services and cloud consumers to identify services that meet their QoS requirements becomes an important problem. In this paper, we argue for QoS-based cloud service recommendation, and propose a collaborative filtering approach using the Spearman coefficient to recommend cloud …

Secrecy Rates And Optimal Power Allocation For Full-Duplex Decode-And-Forward Relay Wire-Tap Channels, Lubna Elsaid, Leonardo Jimenez-Rodriguez, Nghi H. Tran, Sachin Shetty, Shivakumar Sastry

Computational Modeling & Simulation Engineering Faculty Publications

This paper investigates the secrecy rates and optimal power allocation schemes for a decode-and-forward wiretap relay channel where the transmission from a source to a destination is aided by a relay operating in a full-duplex (FD) mode under practical residual self-interference. By first considering static channels, we address the non-convex optimal power allocation problems between the source and relay nodes under individual and joint power constraints to establish closed-form solutions. An asymptotic analysis is then given to provide important insights on the derived power allocation solutions. Specifically, by using the method of dominant balance, it is demonstrated that full power …