Electrical and Electronics Commons^™

Adaptive Beam Director For A Tiled Fiber Array, Mikhail Vorontsov, Jim F. Riker, Ernst Polnau, Svetlana Lachinova, Venkata S. Rao Gudimetla

Electrical and Computer Engineering Faculty Publications

We present the concept development of a novel atmospheric compensation system based on adaptive tiled fiber array architecture operating with target-in-the-loop scenarios for directed beam applications. The adaptive tiled fiber array system is integrated with adaptive beam director (ABD). Wavefront control and sensing functions are performed directly on the beam director telescope primary mirror. The beam control of the adaptive tiled fiber array aims to compensate atmospheric turbulence-induced dynamic phase aberrations and results in a corresponding brightness increase on the illuminated extended object. The system is specifically designed for tiled fiber system architectures operating in strong intensity scintillation and speckle-modulation …

Terahertz Studies Of The Dielectric Response And Second-Order Phonons In A Gase Crystal, B. L. Yu, F. Zeng, V. Kartazayev, R. R. Alfano, K. C. Mandal

Faculty Publications

No abstract provided.

Ozone Concentration In An Atmospheric Pressure Air Plasma Jet, Srinivas Reddy Suddala

Electrical & Computer Engineering Theses & Dissertations

A stable micro-plasma jet in air was generated from a direct current discharge between two molybdenum electrodes (0.25 mm thick) that were separated by an alumina insulator of the same thickness. The after-glow plasma jet was generated by blowing air through the space between the electrodes. A change from laminar to turbulent flow was observed at a gas flow rate of 140 ml/min. The length of the plasma jet increased with flow rate in the laminar mode to approximately 15 mm and decreased in the turbulent mode.

Increasing the gas flow rate up to 200 ml/min at a constant discharge …

Tb3+-Doped K Pb2Br5: Low-Energy Phonon Mid-Infrared Laser Crystal, U. N. Roy, R. H. Hawrami, Y. Cui, S. Morgan, A. Burger, K. C. Mandal, C. C. Noblitt, S. A. Speakman, K. Rademaker, S. A. Payne

Faculty Publications

No abstract provided.

Signal Flow Analysis, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Signal flow graphs are a viable alternative to block diagrammatic representation of a system. What makes signal flow graphs attractive is that certain features from graph theory can be applied to the simplification and the synthesis of complex systems.

Functional Nanoparticles In Thin Films As Sensing Media, Elena A. Guliants, Ryan Schwarb, Hope Bearbower, James R. Gord, Christopher E. Bunker

Electrical and Computer Engineering Faculty Publications

The combination of unique properties offered by materials on the nanoscale with the increased role of surface chemistry in nanostructured solids makes core-shell nanoparticles extremely attractive for application to "smart" thin-film coatings. Sensing properties of nanoparticle-based thin films were studied in several systems containing organic-coated semiconductor and metallic particles. In semiconductors, the interaction of organic shell and/or thin-film "matrix" with the environment results in changes in the nanoparticle's surface states, altering the optical properties of the thin film. Measuring the electrical properties of thin films composed of metallic cores with hydrocarbon shells offers another mechanism to monitor the local environment …

Predicted Properties Of Microhollow Cathode Discharges In Xenon, J. P. Boeuf, L. C. Pitchford, K. H. Schoenbach

Bioelectrics Publications

A fluid model has been developed and used to help clarify the physical mechanisms occurring in microhollow cathode discharges (MHCD). Calculated current-voltage (I-V) characteristics and gas temperatures in xenon at 100 Torr are presented. Consistent with previous experimental results in similar conditions, we find a voltage maximum in the I-V characteristic. We show that this structure reflects a transition between a low-current, abnormal discharge localized inside the cylindrical hollow cathode to a higher-current, normal glow discharge sustained by electron emission from the outer surface of the cathode. This transition, due to the geometry of …

Achromatic Angle-Insensitive Infrared Quarter-Wave Retarder Based On Total Internal Reflection At The Si–Sio2 Interface, R. M.A. Azzam, Cristina L. Spinu

Electrical Engineering Faculty Publications

An achromatic infrared (λ = 1.2–4 μm), Si-prism quarter-wave retarder (QWR) is described that uses total internal reflection at a buried Si–SiO₂ interface at an angle of incidence φ near 33°, where ∂Δ/∂φ = 0. The retardance Δ deviates from 90° by <±2° within a field of view of ±10° (in air) over the entire bandwidth. Because the SiO₂ layer at the base of the prism is optically thick, this QWR is unaffected by environmental contamination.

Volume Holographic Recording And Readout For 90-Deg Geometry, Partha P. Banerjee, Monish Ranjan Chatterjee, Nickolai Kukhtarev, Tatiana Kukhtareva

Electrical and Computer Engineering Faculty Publications

When a prerecorded cross-beam hologram is reconstructed (so-called edge-lit readout) with a uniform plane wave and a point source, the resulting exact solutions reveal Bessel-function-type diffracted beam profiles, which are fundamentally modified under weak propagational diffraction. The case of a profiled beam readout with propagational diffraction may be analyzed using a transfer function approach based on 2-D Laplace transforms. In a second series of investigations, dynamic readout from a cross-beam volume hologram recorded with two orthogonal uniform plane waves is considered for various dependences of the refractive index modulation with intensity. Typically, refractive index profiles that are proportional to the …

Volume Holographic Optical Elements, Ching-Cherng Sun, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

The final two papers are concerned with the analysis of novel holograms. Banerjee et al. investigate holographic recording and reconstruction for edge-lit holograms recorded in a 90-degree geometry. Various cases of recording and readout that incorporate propagational diffraction have been modeled. It is shown that the 90-degree geometry can result in beam shaping, as evidenced through preliminary experimental results with photorefractive lithium niobate. Nguyen et al. propose a new approach for designing computer-generated holograms. An artificial neural network is used to initiate the genetic algorithm so that the high computation cost of genetic algorithms for synthesizing holograms is significantly reduced …

Phase Shifts That Accompany Total Internal Reflection At A Dielectric–Dielectric Interface, R. M.A. Azzam

Electrical Engineering Faculty Publications

The absolute, average, and differential phase shifts that p- and s-polarized light experience in total internal reflection (TIR) at the planar interface between two transparent media are considered as functions of the angle of incidence φ. Special angles at which quarter-wave phase shifts are achieved are determined as functions of the relative refractive index N. When the average phase shift equals π/2, the differential reflection phase shift Δ is maximum, and the reflection Jones matrix assumes a simple form. For N>√3, the average and differential phase shifts are equal (hence δ_p=3δ_s) at …

Microscopic Analysis For Water Stressed By High Electric Fields In The Prebreakdown Regime, R. P. Joshi, J. Qian, K. H. Schoenbach, E. Schamiloglu

Bioelectrics Publications

Analysis of the electrical double layer at the electrode-water interface for voltages close to the breakdown point has been carried out based on a static, Monte Carlo approach. It is shown that strong dipole realignment, ion-ion correlation, and finite-size effects can greatly modify the electric fields and local permittivity (hence, leading to optical structure) at the electrode interface. Dramatic enhancements of Schottky injection, providing a source for electronic controlled breakdown, are possible. It is also shown that large pressures associated with the Maxwell stress tensor would be created at the electrode boundaries. Our results depend on the ionic density, and …

Are Microbubbles Necessary For The Breakdown Of Liquid Water Subjected To A Submicrosecond Pulse?, R. P. Joshi, J. Qian, G. Zhao, J. Kolb, K. H. Schoenbach, E. Schamiloglu, J. Gaudet

Electrical & Computer Engineering Faculty Publications

Electrical breakdown in homogeneous liquid water for an ∼ 100 ns voltage pulse is analyzed. It is shown that electron-impact ionization is not likely to be important and could only be operative for low-density situations or possibly under optical excitation. Simulation results also indicate that field ionization of liquid water can lead to a liquid breakdown provided the ionization energies were very low in the order of 2.3eV. Under such conditions, an electric-field collapse at the anode and plasma propagation toward the cathode, with minimal physical charge transport, is predicted. However, the low, unphysical ionization energies necessary for matching …

Examination Of Focused Beam Propagation Through A Finite Non-Reciprocal Planar Chiral Slab Using Complex Fresnel Coefficients And Dual Transforms, Monish Ranjan Chatterjee, Sumit Nema, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Recently, uniform plane wave propagation across a nonchiral-chiral interface was examined via the development of appropriate Fresnel coefficients. In this extension, propagation of focused uniform and profiled beams through a finite, planar nonreciprocal chiral slab is investigated using complex Fresnel coefficients via angular plane wave decomposition and dual transforms.

Revisiting The Fresnel Coefficients For Uniform Plane Wave Propagation Across A Nonchiral, Reciprocal And Chiral, Nonreciprocal Interface, Monish Ranjan Chatterjee, Sumit Nema

Electrical and Computer Engineering Faculty Publications

The problem of EM wave propagation in non-reciprocal chiral media has been studied by several investigators. In a recent approach, a dual-transform technique has been developed to study the problem of such propagation under paraxial and slow-envelope variation conditions.

In this paper, we first outline some of the results obtained using the dual transform technique for arbitrary boundary conditions within the left boundary of a semi-infinite, non-reciprocal chiral medium for a uniform plane wave, and a fundamental Gaussian-profiled beam. Next, we explore the problem of a uniform EM wave incident at an oblique angle at an interface between a reciprocal, …

Optimal Beam Splitters For The Division-Of-Amplitude Photopolarimeter, R. M.A. Azzam, A. De

Electrical Engineering Faculty Publications

Optimal optical parameters of the beam splitter that is used in the division-of-amplitude photopolarimeter are determined. These are (1) 50%–50% split ratio of the all-dielectric beam splitter, (2) differential phase shifts in reflection and transmission Δ_r and Δ_t that differ by ±π/2, and (3) ellipsometric parameters (ψ_r, ψ_t)= (27.368°, 62.632°) or (62.632°, 27.368°). It is also shown that for any nonabsorbing beam splitter that splits incident unpolarized light equally, the relationship ψ_r+ψ_t=π/2 is always satisfied.

Implementation Of A Si/Sic Hybrid Optically Controlled High-Power Switching Device, Prashant Bhadri, Kuntao Ye, Elena A. Guliants, Fred R. Beyette Jr.

Electrical and Computer Engineering Faculty Publications

The ever-increasing performance and economy of operation requirements placed on commercial and military transport aircraft are resulting in very complex systems. As a result, the use of fiber optic component technology has lead to high data throughput, immunity to EMI, reduced certification and maintenance costs and reduced weight features. In particular, in avionic systems, data integrity and high data rates are necessary for stable flight control. Fly-by-Light systems that use optical signals to actuate the flight control surfaces of an aircraft have been suggested as a solution to the EMI problem in avionic systems. Current fly-by-light systems are limited by …

Translation Of 'Balika Badhu: A Selected Anthology Of Bengali Short Stories', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

This project, which began with the desire to render into English a rather long tale by Bimal Kar about five years ago, eventually grew into a considerably more extended compilation of Bengali short stories by 10 of the most well-known practitioners of that art since the heyday of Rabindranath Tagore. The collection is limited in many ways, not the least of which being that no woman writer has been included, and that it contains only a baker's dozen stories (if we count Bonophool's micro-stories collectively as one ) — a number pitifully small considering the vast and prolific field of …

A 0.5 Μm Thick Polysilicon Schottky Diode With Rectification Ratio Of 10^6, Elena A. Guliants, Chunhai Ji, Young J. Song, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

Polycrystalline Si films, 0.5-mm thick, were obtained as a result of metal-induced growth by sputtering from a Si target on 25 nm thick Ni prelayers at 525 °C. Silicon grew heteroepitaxially on the NiSi2 layer formed due to the reaction between the sputtered Si atoms and Ni. Schottky diodes were fabricated on the Si films by deposition of a Schottky metal on the front surface of the film while Ni disilicide provided an intimate ohmic contact at the back. A Pd/n-Si diode using an n-Si film annealed for 2 h at 700 °C in forming gas demonstrated a rectification ratio …

Self-Assembly Of Spatially Separated Silicon Structures By Si Heteroepitaxy On Ni Disilicide, Elena A. Guliants, Chunhai Ji, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A nonlithographic approach to produce self-assembled spatially separated Si structures for nanoelectronic applications was developed, employing the metal-induced silicon growth. Densely packed Si whiskers, 500–800 nm thick and up to 2500 nm long, were obtained by magnetron sputtering of Si on a 25 nm thick Ni prelayer at 575 °C. The nucleation of the NiSi2 compound at the Ni–Si interface followed by the Si heteroepitaxy on the lattice-matched NiSi2 is suggested to be the driving force for the whisker formation.

Angular Range For Reflection Of P-Polarized Light At The Surface Of An Absorbing Medium With Reflectance Below That At Normal Incidence, R. M.A. Azzam, Ericson E. Ugbo

Electrical Engineering Faculty Publications

The range of incidence angle, 0 < φ < φ_e, over which p-polarized light is reflected at interfaces between transparent and absorbing media with reflectance below that at normal incidence is determined. Contours of constant φ_e in the complex plane of the relative dielectric constant ε are presented. A method for determining the real and imaginary parts of the complex refractive index, ε^1/2 = n + jk, which is based on measuring φ_e and the pseudo-Brewster angle φ_pB, is viable in the domain of fractional optical constants, n, k < 1.

121.6 Nm Radiation Source For Advanced Lithography, Jianxun Yan, Ashraf El-Dakrouri, Mounir Laroussi, Mool C. Gupta

Electrical & Computer Engineering Faculty Publications

A vacuum ultraviolet (VUV) light source based on a high-pressure cylindrical dielectric barrier discharge (DBD) has been developed. Intense and spectrally clean Lyman-α line at 121.6 nm was obtained by operating a DBD discharge in neon with a small admixture of hydrogen. The spectrum, optical power, stability, and efficiency of the source were measured. The influence of the gas mixture and total gas pressure on the VUV intensity has been investigated. Maximum optical power of 3.2 W and spectral width 0.03 nm was achieved. Power stability of 2% for 100 h of operation has also been obtained. The newly developed …

Feedback Correction Of Angular Error In Grating Readout, Monish Ranjan Chatterjee, Sundaram Ramachandran

Electrical and Computer Engineering Faculty Publications

Angular and wavelength READ beam errors in holographic interconnection systems are often a recurrent problem. Several strategies have been proposed to minimize or eliminate such READOUT misalignments.

Some years ago, Chatterjee and co-workers proposed a method involving READ beam wavelength tuning to correct output angular errors. In this paper, we investigate the possibility of using an acousto-optic (A-O) Bragg cell with optoelectronic feedback to dynamically correct the scattered beam for deviations in the incidence direction of the READ beam of a hologram. The concept here is based on an acoustic frequency feedback strategy used recently by Balakshy and Kazaryan for …

Pulsed Electron Heating Of Atmospheric Pressure Air Glow Discharges, Hisham Merhi

Electrical & Computer Engineering Theses & Dissertations

By applying electric field pulses of short duration (compared to the time constant for glow-to-arc transitions) to a weakly ionized gas, the electron energy distribution can be temporarily shifted to higher energies. This effect causes a nonlinear increase in the ionization rate and consequently a larger electron decay time. This effect has been demonstrated using single pulse operation.³ In order to generate plasma with semi-continuous electron density, repetitive operation is required. As a first step towards repetitive pulsed electric field operation, the temporal development of the voltage across the plasma for two subsequent pulses was measured. The dual pulse …

Overview Of Acousto-Optic Bistability, Chaos, And Logical Applications, Monish Ranjan Chatterjee, Erol Sonmez

Electrical and Computer Engineering Faculty Publications

An overview is presented of the key results in the field of acousto-optic bistability in the past two decades. It is shown that the basic acousto-optic bistable device may be described as a nonlinear dynamical system which satisfies a quadratic map. Thereafter, details are presented of several analytical methods, computer modeling approaches, including the SPICE circuit modeling technique, and experiments that have been used to understand the phenomenon.

Extensions to logical and digital applications are also discussed.

Tilted Bilayer Membranes As Simple Transmission Quarter-Wave Retardation Plates, R. M.A. Azzam, Fadi A. Mahmoud

Electrical Engineering Faculty Publications

A tilted bilayer membrane, which consists of two thin films of transparent optically isotropic materials of different refractive indices, can function as a transmission quarter-wave retarder (QWR) at a high angle of incidence. A specific design using a cryolite-Si membrane in the infrared is presented, and its tolerances to small shifts of wavelength, incidence angle, and film thickness errors are discussed. Some designs provide a dual QWR in transmission and reflection. Such devices provide simple linear-to-circular (and circular-to-linear) polarization transformers. Bilayer eighth-wave retarders without diattenuation are also introduced.

Optical Coherent Communication System Using Phase Shift Keying, Syed Javaid Iqbal

Student Works (2000-2009)

This thesis presents the experimental study and design of a coherent communication system by using phase shift keying (PSK). Systems are designed by using all passive elements, which make the system very easy to operate, and less maintenance is required. All the PSK designs are based on a single light source. In this thesis there are five different types of PSK with a single light source communication systems are designed. All designs are experimentally tested in free space. The systems are • All optical two-channel PSK communication system, by using single light source, "All optical single channel, two-way PSK communication, …

Study Of Dynamics And Mechanism Of Metal-Induced Silicon Growth, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

The present study addresses the mechanism of metal-induced growth of device-quality silicon thin films. Si deposition was performed by magnetron sputtering on a 25-nm-thick Ni prelayer at 525–625 °C and yielded a continuous, highly crystalline film with a columnar structure. A Ni disilicide intermediate layer formed as a result of the Ni reaction with Si deposit provides a sufficient site for the Si epitaxial growth because lattice mismatch is small between the two materials. The reaction between Ni and Si was observed to progress in several stages. The NixSiy phase evolution in a Ni:Si layer was studied by x-ray photoelectron …

Rotation-Invariant Synthetic Discriminant Function Filter For Pattern Recognition, Vahid R. Riasati, Partha P. Banerjee, Mustafa A. G. Abushagur, Kenneth B. Howell

Electrical and Computer Engineering Faculty Publications

The ring synthetic discriminant function (RSDF) filter for rotation-invariant response is discussed for pattern recognition. This method uses one half of a slice of the Fourier transform of the object to generate the transfer function of the filter. This is accomplished by rotating the one half of a slice in the Fourier domain through 2π rad about the zero-frequency point of the Fourier plane. This filter has the advantage of always matching at least one half of a slice of the Fourier transform of any rotation of the image. An analytical discussion of the filter construction and correlation results are …

Characterization Of Poly-Si Thin Films Deposited By Magnetron Sputtering Onto Ni Prelayers, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A method of producing a polycrystalline silicon thin film on a foreign substrate without subsequent annealing has been developed. Thermally evaporated 5–100 nm thick Nifilms served as prelayers for magnetron sputtered Si thin films. A continuous film was obtained as a result of metal induced growth of polysilicon during low temperature (below 600 °C) deposition. The film uniformity is promising for large area device applications. The influence of the Ni prelayer thickness on the grain size of thus obtained films was investigated. Atomic force microscopy and cross-sectional scanning electron microscopy studies revealed features in the 150–600 nm size range while …