Controls and Control Theory Commons^™

When Does Global Search Pay For Itself? A Measured Exploration Cost And Energy Break-Even Analysis Of A Metaheuristic Search Controller In Solar Energy Systems, Mohamed Ali Muammar Ezgour

Communications of the IIMA

Autonomous energy systems increasingly delegate the choice of operating point to embedded search algorithms, trading a fast local optimizer that can settle on a wrong point against a slower global search that guarantees the right one at a measurable cost. This paper reframes maximum power point tracking under partial shading as that decision and measures its economics on a fixed photovoltaic plant in MATLAB/Simulink. A Hippopotamus Optimization global search handed over to incremental conductance is compared with incremental conductance alone across seventeen initial duty cycles and thirty random seeds. The hybrid reached the global peak in all thirty seeds, whereas …

Modeling And Simulation Of Solar Battery Charge Controller Using Adaptive Particle Swarm Optimization Mppt Algorithm, Mustafa Sacid Endiz, Göksel Gökkus

Mathematical Modelling and Numerical Simulation with Applications

Implementing an effective Maximum Power Point Tracking method is crucial for optimizing solar energy harvesting against environmental fluctuations like solar radiation and temperature. This paper introduces a novel approach for modeling and simulating a solar battery charge controller, using a modified Particle Swarm Optimization algorithm. The power stage of the system is based on a SEPIC converter, which is employed to manage the power conversion and improve the energy transfer to the battery. The developed circuit model is evaluated under various radiation levels at a constant temperature, as well as under different temperature levels at a constant radiation. Simulations are …

Load Flow And Fault Performance Evaluation Of Interconnected Minigrids In Uganda Using Digsilent Powerfactory, Prossy Mutesi, Santos Kihwele, Emmanuel Matee

Tanzania Journal of Engineering and Technology (TJET)

The increasing demand for decentralized, reliable electricity in rural Sub-Saharan Africa has catalyzed the deployment of minigrids as an intermediate electrification strategy. This study investigates two solar photovoltaic (PV) mini-grids: Kyamugarura and Kanyegaramire, located in western Uganda, approximately 3km apart. Each mini grid initially consisted of 13 kW installed photovoltaic (PV) capacity, supplying power to households and small businesses. Due to rising demand and regular evening blackouts, both mini-grids are being upgraded to 57 kWp each. The integration of these upgraded systems into the national utility grid is proposed and simulated to evaluate performance improvements under two medium-voltage interconnection options: …

Control And Stability Analysis Of Three-Phase Grid-Connected Inverters In Renewable Energy Systems, Yasser Ayeva

Electrical Engineering and Computer Science Faculty Publications and Presentations

The increase in demand for renewable energy sources such as solar and wind systems has led to widespread use and integration of a three-phase grid connected inverters in electric modern electric power systems. The inverters are essential to convert DC power into AC power and to control the delivered power to the grid. However, the use of the inverters in a renewable energy system has some challenges related to stability and control due to the presence of power electronic interfaces and filter dynamics. This paper analyzes the control and stability of three phase grid connected inverter through an LCL filter. …

Control System Emendation And Ai-Driven Optimization For Enhancing A Smart Residential Microgrid, Anthony Nyoyoko

Master’s Theses

This thesis began with a simple idea: to restore the control system of a smart residential microgrid to respond intelligently to electricity prices while remaining safe, reliable, and practical on low-cost hardware. At the start, the goal was to design an economically aware microgrid that could look at electricity prices from the PJM market and make better operational decisions than traditional rule-based control. The motivation was straightforward. As residential renewable energy adoption increases, microgrids are expected to do more than just supply power. They are expected to respond to price volatility, integrate renewable generation, and operate reliably using embedded controllers …

Brrbox, Shawn J. Myers, Lane Cline, Michael Davis, Christian Secrest

Williams Honors College, Honors Research Projects

This report details the project known as “The BRRBOX”, a reusable, insulated thermoelectric cooler developed to keep internal temperatures at refrigeration levels or cooler for at least 48 hours. The cooler will track its internal temperature during this period and be able to give the data at the end of its delivery cycle to keep up with food and pharmaceutical standards during delivery. The BRRBOX uses Peltier-based cooling alongside vacuum insulation panels and fans to achieve efficient thermal control. An onboard microcontroller will monitor temperature, record the data, and adjust the cooling output to minimize power consumption. The box will …

Optimal & Robust Control Of A Bidirectional Dc-Dc Converter In Ev Systems, Yasser Ayeva

Electrical Engineering and Computer Science Faculty Publications and Presentations

This paper analyzes the performance of PI, LQR, and H∞ controllers for the regulation of a bidirectional buck boost converter in electric vehicle systems. To get the system state space equations, a continuous conduction average model is linearized. For analysis a PI controller will be used as baseline, the LQR controller will be used to improve transient response, and the H∞ controller will be used for the system robustness and disturbance rejection. The simulation results show that the advanced controllers surpass the PI controller in terms of overshoot, settling time, and voltage ripple, with the H∞ controller offering the best …

Resilience Engineering Via Bifurcation And Ecological Network Analysis: Demonstrated In An Electric Power Case Study, Rogelio Gracia Otalvaro

Doctoral Dissertations and Master's Theses

Modern systems are increasingly complex, interconnected cyber-physical systems that combine digital controls with physical infrastructure. This integration, along with the constant introduction of new technologies and actors into the network, enables reliable operation but introduces vulnerabilities to unexpected and varied disruptions and cascading failures, making resilience a critical concern. Traditional risk management and resilience assessment methods often struggle with the nonlinearity and dynamic behavior of these systems. This dissertation proposes a novel approach combining Bifurcation Analysis (BA) and Ecological Network Analysis (ENA) to enhance the understanding and improvement of system resilience. BA, a mathematical method from dynamical systems theory, is …

Secure Control And Trust Evaluation Framework For Autonomous Transportation Systems, Grace Muriithi

All Dissertations

This dissertation advances the cybersecurity of hybrid tracked vehicles (HTVs) and ship power systems (SPSs) by developing innovative cyber-attack models and corresponding defence frameworks. First, we formulate stealthy false-data-injection attacks (FDIAs) on HTV energy-management systems as a partially observable Markov decision process (POMDP) solved via deep reinforcement learning. A novel sniffing-based reward function guides the attacker to covertly degrade battery capacity and energy efficiency, which we evaluate using custom stealth–impact metrics and a sliding-window anomaly detector (Isolation Forest with Dynamic Time Warping). Additionally, we model sophisticated control-layer attacks in HTVs, including reinforcement-learning-optimised replay attacks and denial-of-service (DoS) attacks targeting generator-speed …

Data-Driven Koopman Theory For Transient Stability And Safety Analysis Of Power Systems With Renewable Penetration, Bhagyashree Umathe

All Dissertations

This dissertation presents a novel approach to analyzing and controlling nonlinear systems using the Koopman operator framework and data-driven methods. Nonlinear power systems, characterized by complex behaviors and sensitivity to initial conditions, pose significant challenges for stability and safety assessment, especially during transient events.

The first part of this work focuses on reachability analysis using the spectral properties of the Koopman operator. By leveraging eigenfunctions extracted from sampled trajectory data, the approach computes forward and backward reachable sets efficiently, even in high-dimensional nonlinear systems, without requiring dense state-space sampling. This method is validated through numerical examples, demonstrating its ability to …

Thermal Energy Storage System Using Silica Sand As Heat Storage Medium: Simulation Of Geita Gold Mine, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

Currently, Geita Gold Mine (GGM) relies on electrical energy from the national grid and diesel power generators to generate electricity for various industrial applications. The plant currently spends a large amount of money on generating power from diesel generators. The total annual cost of power generation from diesel generators including lubricants is USD 56,057,990. The total annual fuel cost is USD 53,531,805 for a total of 54,985,473 liters per year. Most of the power generated by the generators is consumed in the industrial thermal processes. Thermal energy applications at the plant are thermal drying of the extracted ores to remove …

The Impacts Of Renewable Energy Sources: A Review On Grid Inertia And Frequency Regulation, Sospeter Gabriel

Tanzania Journal of Engineering and Technology (TJET)

The power system is gradually transitioning into low inertia due to integrating substantial intermittency quantity of converter-based renewable energy sources, such as wind and photovoltaic power, into the current power grid network. This integration presents significant inertia and frequency control challenges to the network as a result of a decrease in the percentage of synchronous generators. Moreover, faster frequency deviations are posed by the mismatch between the supply and demand during contingencies, which creates difficulties in preserving the frequency stability of the power system. This research explores the impacts of renewable energy sources (RESs) on grid inertia and frequency management …

Analysis Of An Improved Reliability Dual-Buck Structured Three-Level Flying Capacitor Inverter, Almachius Kahwa Dr.

Tanzania Journal of Engineering and Technology (TJET)

With the increased demand for high-reliability power converters in the electric drive-train and propulsion systems, the efforts to design and analyze converters with high fault tolerance have become apparent. Among the emerging trends to improve the reliability of power converters is the incorporation of dual-buck (DB) structures in traditional converter topologies. Thus, this paper studies a single-phase dual-buck structured three-level flying capacitor (FC) inverter. The dual-buck flying capacitor (DBFC) inverter was constructed in such a way as to suppress the shoot-through problems that may occur because of the switching mismatch and gate driver delay, as exhibited in the traditional FC …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

Adaptive Delay Compensation Frameworks For Distributed Real-Time Co-Simulation In Power Systems, Elutunji Buraimoh

All Dissertations

This dissertation presents a model-free, adaptive delay prediction and compensation framework for geographically distributed real-time power system co-simulation environments. Communication delays—both constant and real-time-varying—significantly degrade the accuracy, fidelity, and stability of co-simulated systems, particularly in dynamic and transient analyses of partitioned power systems. To address this, a predictor-based framework is developed that compensates for delays without requiring system models, computationally intensive signal transformations, or manual intervention.

The proposed solution leverages a Damping Impedance Method as the interface algorithm, combined with a sliding-mode control-inspired predictor system. Both single-parameter and multi-parameter predictor configurations are implemented, with the multi-parameter design providing an additional …

Static Characteristics Of An Electromagnetic Three-Phase Reactive Power Sensor For Converting Asymmetric Currents, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article discusses the processes in the elements and structures of three-phase electromagnetic current sensors used in measuring and controlling three-phase asymmetric reactive power in power supply systems, research models of quantities and parameters, physical mechanisms, and mathematical formulas based on graphical models.

Clustering Mini-Grids To Enhance Power Systems Reliability In Distributed Generation, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the effectiveness of clustering mini-grids as a method to improve the reliability and operational stability of distributed generation systems in remote areas, particularly where renewable energy sources are predominant. As renewable resources like solar and wind are increasingly integrated into mini-grids, these systems face various challenges, particularly in maintaining stable voltage and frequency across interconnected networks. Such issues are compounded by the intermittent nature of renewable energy sources and the lack of extensive communication infrastructure in rural or resource-constrained settings. To address these control challenges, this study applies droop control techniques to two mini-grids in Uganda, utilizing …

A Dynamically Efficient Predictive Controller For Voltage Stability In A Dc To Dc Boost Converter, Giovanni Reyna

Electrical and Computer Engineering ETDs

Reliable voltage regulation has become a critical issue with increase demand in modern power electronic applications. This study presents a Model Predictive Controller (MPC) for voltage regulation in DC-to-DC boost converters. A closed loop analytical MPC framework is created with the purpose of computing optimal duty cycles to maintain a stable output voltage under varying load conditions, input changes, and disturbances.

To evaluate the performance of the MPC we set the controller against a comparative analyzing with a traditional cascading proportional integral (PI) controller. The proposed controller design is specifically targeted to improve dynamic efficiency during the converter’s transient events. …

Long-Range Inertia Prediction Considering Contemporary Evolution Of Power Grid Networks, Peter M. Makolo

Tanzania Journal of Engineering and Technology (TJET)

Reduced network inertia due to high penetration levels of non-synchronous generators in modern power systems is becoming a pressing issue. As a result, very quick inertial responses are observed after contingency events in networks. Due to quick inertial responses, there is a practically very limited time interval for control actions in real-time. Thus, system operators need to understand the prior inertia values to plan, control, and operate the network securely. Long-range forecasting of the network's inertia values, in contrast to short-range forecasting techniques, can pinpoint when the network is most likely to be vulnerable in a reasonable time ahead. Thus, …

Heavy Metals Pollution In Roadside Ecosystems, Lilian Matafu

Tanzania Journal of Engineering and Technology (TJET)

Heavy metals refer to metallic elements that are characterized by having a relatively high density and they are toxic or poisonous even at low concentration. They are environmental pollutant owing to toxicity and longevity in atmosphere and ability to accumulate in living things via bioaccumulation. They tend to enter in different system such as food chain. Analyses of water, soil sediment and the surrounding growing plants (Cynodon dactylon and Cyperus species) for selected heavy metals (Cd, Pb, Zn and Cu) were conducted on a roadside pond located at Boko MSB, Dar es Salaam. Pond water, soil sediments and plant samples …

State-Of-Charge Estimation Using Deep Learning For Electric Vehicles, Samer Yahya Ribhe Tahboub

LSU Master's Theses

This thesis investigates the application of deep learning models for State of Charge (SOC) estimation in Battery Management Systems (BMS) for electric vehicles (EVs), focusing on optimizing EV range, lifespan, and performance while addressing challenges like range anxiety. The study explores three deep learning architectures—Long Short-Term Memory (LSTM), Bidirectional LSTM (BiLSTM), and Gated Recurrent Unit (GRU)—each designed to capture complex temporal dependencies in battery data. The LSTM model is trained on EV battery data, including voltage, current, temperature, and SOC, providing a strong baseline for SOC estimation. The BiLSTM model enhances accuracy by processing data in both forward and backward …

Characterization And Modeling Of Polyphase Machines And Power Conditioning Components, Nathan Lockhart

Electrical Engineering Dissertations - Archive

Microgrid power configurations have become increasingly prevalent in recent power systems due to the rise of power electronic energy generation, energy storage, and the many diverse electrical demands. Microgrids offer numerous advantages over traditional power electronic networks, which rely on large rotating generators to supply power over extensive distances to multiple users. Remote power grids are particularly beneficial for smaller networks that may be isolated or have unique power requirements, often incorporating energy storage to enhance operational flexibility. Advances in power electronics, such as medium voltage DC distribution, are enhancing the reliability, redundancy, and integration capabilities of isolated microgrids.

To …

Snake Optimization Algorithm For Fractional Order Controller In Three-Area Load Frequency Regulation, Shubra Goel, Omveer Singh

ASEAN Journal on Science and Technology for Development

The transition toward renewable energy-dominated power systems have accentuated the intricacies of frequency control, necessitating advanced regulatory mechanisms. This investigation articulates a tri-zonal frequency stabilization approach, employing a hybridized controller that synergizes Fuzzy Fractional-Order PI and Tilt-Integral-Derivative methodologies. The uniqueness of this approach is further amplified by the deployment of the Snake Optimization algorithm for precise parameter tuning. Set within a conventional grid topology integrated with assorted renewable energy sources, the study evaluates the controller’s adaptability and resilience through a series of comprehensive scenario-based analyses.

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Design, Control, And Evaluation Of A Photovoltaic Snow Removal Strategy Based On A Bidirectional Dc-Dc Converter For Photovoltaic–Electric Vehicle Application, Salma Elakkad, Mohamed Hesham, Hany Ayad Bastawrous, Peter Makeen

Electrical Engineering

A novel self-heating technique is proposed to clear snow from photovoltaic panels as a solution to the issue of winter snow accumulation in photovoltaic (PV) power plants. This approach aims to address the shortcomings of existing methods. It reduces PV cell wear, resource loss, and safety risks, without the need for additional devices. A self-heating current is applied to the solar panel to melt the snow covering its surface, which is then allowed to slide off the panel due to gravity. The proposed system consists of a bidirectional DC-DC converter, which removes the snow cover by heating the solar PV …

Power Controller For Insulated Solar Electric Cooker, Ryan Koshy, Justin Tae-Hoon Kim

Electrical Engineering

Insulated Solar Electric Cookers, or ISECookers, are devices created to aid those in impoverished regions improve safety, sustainability, and quality of life regarding their cooking practices. ISECookers present an alternative to traditional biofuel/biomass energy sources and provide a closed-loop, self-sustaining system that can be used in a variety of environments. These devices present solutions to widespread issues such as pollution, deforestation, and hazardous emissions as a result of traditional cooking in developing regions around the world. A notable obstacle of these devices is power delivery. Given the varying conditions experienced by a solar panel (inclement weather, irradiance irregularities, etc.), it …

Harmonic Flow Modeling And Analysis Of A Green Hybrid Ac/Dc Seaport Power System, Krishan Kaushal Ram, Taufik, Helen Yu, Siddharth Vyas

Master's Theses

This thesis aims to design and develop a model for a proposed Green Seaport power system and perform harmonic analysis. The model was developed using MATLAB Simulink and tests were performed by dividing the system into several Battery Energy Storage System (BESS) operating modes such as simultaneous charging and discharging, simultaneous charging, and simultaneous discharging. For each mode, BESS state of charge and other factors such as solar irradiance for the PV system, load levels and power factor were varied to observe the impact on system’s voltage Total Harmonic Distortion (THD) level and current Total Demand Distortion (TDD). 62 separate …

Decentralized Control Of Renewable Generation Systems, Milad Shojaee

Dissertations

As the global community struggles with the escalating challenges of climate change and environmental degradation, the transition to renewable energy sources has emerged as a paramount solution. Harnessing energy from renewable sources such as solar, wind, and hydro power not only alleviates the adverse effects of conventional fossil fuel energy sources, but also establishes a foundation for a sustainable and resilient future. Microgrids have been utilized as a feasible platform to integrate renewable energy sources into the electrical power generation networks. They include one or more generation units connected to nearby users, and are able to operate in both grid-connected …

Real-Time Degradation Abatement Framework For Energy Storage System In Automotive Application Using Data-Driven Approaches, Laxman Timilsina

All Dissertations

The increasing popularity of electric vehicles (EVs) is driven by their compatibility with sustainable energy goals. However, the decline in the performance of energy storage systems, such as batteries, due to their degradation puts EVs and hybrid electric vehicles (HEVs) at a disadvantage compared to traditional internal combustion engine (ICE) vehicles. The batteries used in these vehicles have limited life. The degradation of the battery is accelerated by the operating conditions of the vehicle, which further reduces its life and increases the reliability and economic concerns for the vehicle’s operation. The aging mechanism inside a battery cannot be eliminated but …

Features Of Magnetoelastic Converters Of Mechanical Quantities Of Transformer Type, Sulton Amirov, Kamila Jurayeva

Chemical Technology, Control and Management

The article discusses the features of a magnetoelastic transformer type transducer. In magnetoelastic transformer-type transducers, mutual inductance is assumed as a variable value, which is a function of the value of the applied mechanical force. Hence, the transformation coefficients of such converters are also variable. There are also choke type converters in which a change in the magnetic permeability of the magnetic circuit leads to a change in the total electrical resistance of the choke. For further research, transformer-type converters were selected, which make it possible to widely implement techniques for improving basic characteristics.