Controls and Control Theory Commons^™

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

End-To-End Development And Experimental Validation Of A 1/10-Scale Autonomous Vehicle, Rikkin Pankaj Panchal

Electrical Engineering Theses

Autonomous vehicle development demands vast resources, making scaled down platforms a critical alternative for solving core algorithmic challenges. The primary contribution of this thesis is the end to end development and validation of a complete real time autonomous driving pipeline deployed on a one tenth scale vehicle. To streamline platform development, an AI assisted annotation framework automates dataset generation, significantly reducing manual labor while improving training data quality. The system perception stack features a reinforcement learning guided online multi camera calibration framework that enables adaptive surround view stitching without the need for offline recalibration. This is paired with robust lane …

Multi-Level Energy Optimization For Connected And Automated Vehicles: From Cooperative Multi-Vehicle Control To Individual Powertrain Management, Pruthwiraj Santhosh

Dissertations, Master's Theses and Master's Reports

The transportation sector currently accounts for nearly 30% of global energy consumption, necessitating urgent advancements in vehicle efficiency to meet Net Zero targets. Leveraging connectivity and automation, this dissertation proposes and validates methodologies to reduce the energy consumption of light-duty vehicles at both fleet and individual levels.

First, a validation framework is developed to bridge the “simulation-to-real world” gap in Cooperative Automated Vehicle (CAV) research. Moving beyond virtual simulations, the study establishes a methodology for physically validating centralized control architectures via a custom Cellular V2X network. By synchronizing vehicle-powertrain models with physical test vehicles, the framework successfully orchestrates complex arterial …

Advances Towards A Robotic Management Vehicle Suited To Nurse Row Crops To More Efficient Outcomes, Adam Mk Gronewold

Dartmouth College Ph.D Dissertations

Enhancing agricultural production while reducing input costs remains a central challenge in modern row-crop management. Recent advances in computation, imagery, and sensors are enabling more efficient practices across various agricultural domains, and automation technologies are increasingly available to manage tasks central to perennial crop development. Automation in row-crop agriculture, by contrast, lags behind. This thesis explores utilizing small, unmanned ground vehicles to transform row cropping through the implementation of unconventional, in-season management strategies. The first focus of this work considers improvements to nitrogen fertilization using small, autonomous vehicles. An agronomy experiment in corn assessed the effects of gradually applying nitrogen …

Model Reference Adaptive Control For Mobile Manipulators And Beyond, Srivatsan Srinivasan

All Dissertations

In recent years, robotics has expanded into various sectors, including manufacturing, transportation, and household services, making the integration of autonomy a critical area of research. This shift aims to ensure safety and enhance the utility of autonomous systems. Traditionally, robotic applications focused separately on mobility, like automated guided vehicles, and manipulation, such as serial-chain arms in manufacturing. Today, however, we see a merging of these capabilities in the growing field of mobile manipulator robots that combine movement with purposeful interactive functionalities.

A typical mobile manipulator is a robotic arm mounted on a wheeled base. This thesis focuses on advancing control …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

V2i-Based Adaptive Collision Avoidance For Safety And Traffic Efficiency, Vaishnavi Balambeed

Dissertations, Master's Theses and Master's Reports

To leverage the growing communication and connectivity among modern vehicles, Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) systems are increasingly being used to implement active safety applications. However, current research often overlooks the impact of algorithms such as collision avoidance on traffic flow efficiency. This work investigates the adaptation of a collision avoidance algorithm implemented in V2I to incorporate a variable time headway and spacing control strategy. The proposed approach aims to maintain higher average speeds among vehicles, lower individual vehicle’s waiting, and travel times in the vicinity of the infrastructural unit while simultaneously avoiding collisions; thereby enhancing both safety and traffic …

Adaptive Traction, Power And Torque Control Strategies And Optimization In An All-Electric Powertrain, Aymane Hidara

Theses and Dissertations

Electric and hybrid-electric vehicles lean heavily on intricate control algorithms to provide smooth, reliable, and secure operations under any driving conditions. Three distinct supervisory control strategies have been developed, each aiming to improve reliability and vehicle performance of a dual-motor electric vehicle equipped with an all-wheel-drive, fully electric powertrain. These algorithms are adept at dynamically modulating and constraining the torque provided to the wheels, leveraging two autonomous permanent magnet electric drive units. This study utilizes a vehicle model jointly provided by MathWorks and General Motors in partnership with industry sponsors. The these strategies were implemented in the model and enhanced …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Safe Navigation Of Quadruped Robots Using Density Functions, Andrew Zheng

All Theses

Safe navigation of mission-critical systems is of utmost importance in many modern autonomous applications. Over the past decades, the approach to the problem has consisted of using probabilistic methods, such as sample-based planners, to generate feasible, safe solutions to the navigation problem. However, these methods use iterative safety checks to guarantee the safety of the system, which can become quite complex. The navigation problem can also be solved in feedback form using potential field methods. Navigation function, a class of potential field methods, is an analytical control design to give almost everywhere convergence properties, but under certain topological constraints and …

Mathematical Model Of An Industrial Robot Built On The Basis Of Linear Motion Mechatron Modules, Matyokubov Nurbek Rustamovich, Rakhimov Temurbek Omonboyevich

Chemical Technology, Control and Management

The use of Industry 4.0 technologies in modern production serves to increase production efficiency. Robots and robotic complexes with innovative intelligent control are widely used in industrial production. However, studying their mechanical part, linear motion mechatronic modules and control system is a complex object. The variety and complexity of control methods and operating modes negatively affects the operator's working time and production productivity. In such cases, it is necessary to improve control methods and develop technologies used in industry, including robots and robotic manipulators, which allow to perform short movements with high accuracy and speed. In the article, the mathematical …

Integrated Energy-Aware Motion Planning And Charge Scheduling Of Unmanned Aerial Vehicles, Hayleyesus Alemayehu

All Theses

The growing demand for unmanned aerial vehicles (UAVs) is driven by their operational convenience, cost-effectiveness, availability, and adaptability to various scenarios. In energy-constrained environments, optimizing energy consumption and ensuring a continuous power supply for UAVs is crucial for mission success. The objective of this thesis is to address this issue by integrating energy-aware motion planning and charge scheduling for UAVs by utilizing a charger hosted on an unmanned ground vehicle (UGV), whose rendezvous locations and routes are jointly computed to minimize overall energy consumption.

This thesis proposes a hierarchical trajectory and control framework comprising local and global planners for each …

Improved Vehicle-Bridge Interaction Modeling And Automation Of Bridge System Identification Techniques, Omar Abuodeh

All Dissertations

The Federal Highway Administration (FHWA) recognizes the necessity for cost-effective and practical system identification (SI) techniques within structural health monitoring (SHM) frameworks for asset management applications. Indirect health monitoring (IHM), a promising SHM approach, utilizes accelerometer-equipped vehicles to measure bridge modal properties (e.g., natural frequencies, damping ratios, mode shapes) through bridge vibration data to assess the bridge's condition. However, engineers and researchers often encounter noise from road roughness, environmental factors, and vehicular components in collected vehicle signals. This noise contaminates the vehicle signal with spurious modes corresponding to stochastic frequencies, impacting damage monitoring assessments. Thus, an efficient and reliable SI …

Topological Interpolation Method For Modeling Dynamic Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

The method of simulation structural-complex continuous-discrete control systems is discussed. For simulation and calculation of dynamic processes in continuous-discrete systems topological interpolation method is proposed, based on application of hybrid methods of space of state variables and interpolation of signals. The essence of the method is that the dynamics of the investigated system, considered at the final interval, is broken down into subintervals, on each of which the processes are described by linear ordinary system differential equations. The computational efficiency of the proposed method was evaluated by comparison with standard methods such as the Runge-Kutta-Merson method. The use of this …

Deep Reinforcement Learning And Game Theoretic Monte Carlo Decision Process For Safe And Efficient Lane Change Maneuver And Speed Management, Shahab Karimi

All Dissertations

Predicting the states of the surrounding traffic is one of the major problems in automated driving. Maneuvers such as lane change, merge, and exit management could pose challenges in the absence of intervehicular communication and can benefit from driver behavior prediction. Predicting the motion of surrounding vehicles and trajectory planning need to be computationally efficient for real-time implementation. This dissertation presents a decision process model for real-time automated lane change and speed management in highway and urban traffic. In lane change and merge maneuvers, it is important to know how neighboring vehicles will act in the imminent future. Human driver …

Study Of Eco-Driving And Charging Planning In Connected And Automated Vehicles Environment, Pradeep Bhat

Dissertations, Master's Theses and Master's Reports

In this dissertation, the development of eco-driving and charging planning algorithms in the connected and automated vehicle environment (CAV) are presented. CAV technologies provide opportunities for potential energy savings and efficiency improvement of transportation networks, which are explored through multiple research tasks in this study.

The objective of the first study presented in Chapter 2 is to reduce vehicle dynamic losses and required tractive force while completing trip distance within a given travel time. Sequential Quadratic Programming method is employed for this nonlinearly constrained optimization problem. The validation result illustrates the benefits of optimal velocity trajectories. The objective of the …

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

On-Board Artificial Intelligence For Failure Detection And Safe Trajectory Generation, Eduardo Morillo

Doctoral Dissertations and Master's Theses

The use of autonomous flight vehicles has recently increased due to their versatility and capability of carrying out different type of missions in a wide range of flight conditions. Adequate commanded trajectory generation and modification, as well as high-performance trajectory tracking control laws have been an essential focus of researchers given that integration into the National Air Space (NAS) is becoming a primary need. However, the operational safety of these systems can be easily affected if abnormal flight conditions are present, thereby compromising the nominal bounds of design of the system's flight envelop and trajectory following. This thesis focuses on …

Multi-Robot Symbolic Task And Motion Planning Leveraging Human Trust Models: Theory And Applications, Huanfei Zheng

All Dissertations

Multi-robot systems (MRS) can accomplish more complex tasks with two or more robots and have produced a broad set of applications. The presence of a human operator in an MRS can guarantee the safety of the task performing, but the human operators can be subject to heavier stress and cognitive workload in collaboration with the MRS than the single robot. It is significant for the MRS to have the provable correct task and motion planning solution for a complex task. That can reduce the human workload during supervising the task and improve the reliability of human-MRS collaboration. This dissertation relies …

Deployment Considerations For Autonomous And Integrated Mobility Services Of The Future, Panagiotis Georgakis

CONTROL 2022: 13th United Kingdom Automatic Control Council (UKACC) International Conference

No abstract provided.

Programming An Autonomous Vehicle Ethical Decision Maker Based On Injury Severity, James E. Pickering

CONTROL 2022: 13th United Kingdom Automatic Control Council (UKACC) International Conference

No abstract provided.

Issues Building An Autonomous Vehicle, Paul King

CONTROL 2022: 13th United Kingdom Automatic Control Council (UKACC) International Conference

No abstract provided.

Control, Decision-Making, And Learning Approaches For Connected And Autonomous Driving Systems With Humans-In-The-Loop, Fangjian Li

All Dissertations

By virtue of vehicular connectivity and automation, the vehicle becomes increasingly intelligent and self-driving capable. However, no matter what automation level the vehicle can achieve, humans will still be in the loop despite their roles. First, considering the manual driving car as a disturbance to the connected and autonomous vehicles (CAVs), a novel string stability is proposed for mixed traffic platoons consisting of both autonomous and manual driving cars to guarantee acceptable motion fluctuation and platoon safety. Furthermore, humans are naturally considered as the rider in the passenger vehicle. A human-centered cooperative adaptive cruise control (CACC) is designed to improve …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Problem Solving Methods For Synthesis Of Physical Principles Of Mechatronic Module Operations In Intelligent Robotic Systems, Nazarov Khayriddin Nuritdinovich

Chemical Technology, Control and Management

The scientific paper investigates the methods for solving problems of synthesis of physical principles of operation of mechatronic modules of intelligent robotic systems are considered.

In addition, it deals with the specifics of the process of synthesis of the physical principles of the operation of mechatronic modules using predicate models, list models and information matrices of physical and technical effects.

It shows the interpretation of the components of the model of the system for the synthesis of the physical principles of operation of mechatronic modules of intelligent robotic systems and automatic control and the features of the synthesis algorithm for …

Development Of Autonomous Vehicle Motion Planning And Control Algorithm With D* Planner And Model Predictive Control In A Dynamic Environment, Somnath Mondal

Dissertations, Master's Theses and Master's Reports

The research in this report incorporates the improvement in the autonomous driving capability of self-driving cars in a dynamic environment. Global and local path planning are implemented using the D* path planning algorithm with a combined Cubic B-Spline trajectory generator, which generates an optimal obstacle free trajectory for the vehicle to follow and avoid collision. Model Predictive Control (MPC) is used for the longitudinal and the lateral control of the vehicle. The presented motion planning and control algorithm is tested using Model-In-the-Loop (MIL) method with the help of MATLAB® Driving Scenario Designer and Unreal Engine® Simulator by Epic Games®. Different …

Resilience For Multi-Filter All-Source Navigation Framework With Integrity, Jonathon S. Gipson, Robert C. Leishman

Faculty Publications

The Autonomous and Resilient Management of All-source Sensors (ARMAS) framework monitors residual-space test statistics across unique sensor-exclusion banks of filters, (known as subfilters) to provide a resilient, fault-resistant all-source navigation architecture with assurance. A critical assumption of this architecture, demonstrated in this paper, is fully overlapping state observability across all subfilters. All-source sensors, particularly those that only provide partial state information (altimeters, TDoA, AOB, etc.) do not intrinsically meet this requirement.
This paper presents a novel method to monitor real-time overlapping position state observability and introduces an "observability bank" within the ARMAS framework, known as Stable Observability Monitoring (SOM). SOM …

Implementation Of Fuzzy Logic Control Into An Equivalent Minimization Strategy For Adaptive Energy Management Of A Parallel Hybrid Electric Vehicle, Jared Alexander Diethorn

Graduate Theses, Dissertations, and Problem Reports (ETD)

As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Electric vehicles have been introduced by the industry, showing promising signs of reducing emissions production in the automotive sector. However, many consumers may be hesitant to purchase fully electric vehicles due to several uncertainty variables including available charging stations. Hybrid electric vehicles (HEVs) have been introduced to reduce problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in …

Control Of Mr Damper Using Anfis And Pid Controller For Optimum Vehicle Ride Comfort, Mohammad Faisal Yakhni, Mohamad Ali, Mohamed El-Gohary

BAU Journal - Science and Technology

Suspension system design is an important challenging duty that facing car manufacturers, so the challenge has become to design the best system in terms of providing ride comfort and handling ability under all driving situations. The goal of this paper is to provide assistance in enhancing the effectiveness of the suspension system. A full car model with eight Degrees Of Freedom (DOF) was developed using MATLAB/Simulink. Validation of the Simulink model was obtained. The model was assumed to travel over a speed hump that has a half sine wave shape and amplitude that changing from 0.01 to 0.2 m. The …