Biomedical Commons^™

Rapid Prototyping Of Low-Cost Sensor Systems Towards A Platform For Upper Limb Posture Estimation, Russell Rathbun

Electrical Engineering and Computer Science Undergraduate Honors Theses

Physical therapy requires patients to perform repeated actions to achieve meaningful results in rehabilitation. This thesis explores production methods and various sensor systems by utilizing rapid prototyping, inertial measurement units (IMUs), and capacitive sensor arrays (CSAs). CSAs can be made from a wide ar- ray of materials and techniques including 3d printing and laser ablation–to rapidly create CSAs that can be custom fit to enable proximity, force, and touch detection. IMU and CSA systems individually are able to track upper limb movements, ges- tures, and positions. This combination of sensors enables accurate upper limb pos- ture estimation of patients. This …

Modification Of Time-Domain Terahertz Spectroscopy System To Polarimetry Imaging System With Application To Human Breast Cancer Surgical Specimen, Nikita Gurjar

Graduate Theses and Dissertations

Breast-conserving therapy (lumpectomy) is one of the most performed breast cancer surgeries in the United States. The best outcome of lumpectomy surgery is achieved when the surgical margins are free of cancer. When remnants of cancer are detected at the surgical margins after the initial operation, a second operation will be required to remove the cancer. Unfortunately, a significant number of patients undergo breast conserving surgery (BCS) at local hospitals that do not have access to immediate on-site pathology leading to high rates of re-excision or reoperation (greater than 30%). Therefore, there is a significant need for new intraoperative technology …

Development Of Medical Device For Volume Status Assessment Using Peripheral Venous Pressure, Audra Beneux

Graduate Theses and Dissertations

The severe side effects of acute dehydration and blood loss may be prevented if assessed and treated quickly. As amplifier technology has improved, small peripheral venous pressure (PVP) signals collected using a transducer on an intravenous catheter can be analyzed to monitor patient volume status. This thesis details the development of an embedded system prototype that quickly and accurately assesses volume status using PVP analysis. The volume prediction algorithm classified 10 seconds of PVP data as “dehydrated” or “resuscitated”. The hardware design consisted of four primary areas: analog signal conditioning, processing, user interaction, and power. After data collection, the signal …

Fiber-Based Time-Correlated Single Photon Counting As A Method For Investigating Metabolism During Tetanic Contraction Of Skeletal Muscle, Kathryn Miller Priest

Graduate Theses and Dissertations

Nicotinamide adenine dinucleotide (NAD) is a cofactor that serves to shuttle electrons during metabolic processes such as glycolysis, the tricarboxylic acid cycle, and oxidative phosphorylation (OXPHOS) [1-5]. The reduced form of NAD, NADH, is autofluorescent, making it a measurable characteristic in the investigation of metabolic changes. The fluorescence lifetime of NADH is dependent on the state of protein binding, specifically free or bound NADH, allowing for detection of metabolic shifts between glycolysis (free NADH) and OXPHOS (bound NADH) [6-16]. Fiber-coupled time-correlated single photon counting (TCSPC) equipped with an implantable needle probe can be used to measure NADH lifetime in vivo …

Investigation Of Membrane Based Processes For Biomedical Applications, Efecan Pakkaner

Graduate Theses and Dissertations

As substantial developments were achieved in nanotechnology and polymer engineering, especially in the last few decades, the use of membranes and membrane-based procedures was found to be expanding into more and more research and development areas; including biological engineering, life sciences and biomedical engineering. Not only have they been the main focus of meaningful research, but they have also been the main pieces of the solutions to very thorny problems encountered within a wide range of applications from microfluidics to water treatment, thanks to their versatility, cost-effectiveness and biocompatibility, when compared to conventional separation techniques. To celebrate and embrace these …

Experimental And Analysis Of Electromagnetic Characterization Of Biological And Non-Biological Materials In Microwave, Millimeter-Wave, And Terahertz Frequency Bands, Nagma Vohra

Graduate Theses and Dissertations

The goal of this research is to characterize the electromagnetic properties of biological and non-biological materials at terahertz (THz), millimeter-wave, and microwave frequency bands. The biological specimens are measured using the THz imaging and spectroscopy system, whereas the non-biological materials are measured using the microwave and millimeter-wave free-space system. These facilities are located in the Engineering Research Center at the University of Arkansas. The THz imaging system (TPS 3000) uses a Ti-Sapphire laser directed on the photoconductive antennas to generate a THz time domain pulse. Upon using the Fourier Transform, the spectrum of the pulsed THz signal includes frequencies from …

The Linear And Non-Linear Relationships Between Peripheral Venous Pressure, Arterial Circulation, And Patient Factors, Lauren Crimmins

Biomedical Engineering Undergraduate Honors Theses

Peripheral venous pressure (PVP) can be used to measure blood volume status with a minimally invasive procedure. The pediatric cohort undergoing surgery for pyloric stenosis was studied to determine how arterial circulation and patient factors linearly impact PVP. The relationship between PVP and these confounding factors can provide valuable information for future PVP researchers.

To investigate the linear relationship between PVP and electrocardiogram (ECG) the waveforms were transformed into the frequency domain. A power spectral density was plotted, and the Pearson correlation coefficients were calculated for both preoperative and intraoperative settings. Linear regression models were computed for PVP and varying …

New Force Transducer For Mitral Valve Chordae Tendinea, Joseph Berryman

Biomedical Engineering Undergraduate Honors Theses

In order to inform the future of mitral valve repair and replacement, more investigation into the mechanics of the sub-valvular structure is needed. Understanding the roles of each chord during valve closure requires a sensor capable of detecting these small forces with enough sensitivity to determine the characteristics of each of the chordal types. The focus of the cantilever force transducer is to maximize this sensitivity while also minimizing the invasiveness of the sensor on the overall function of the chord. The design utilizes flexible yet strong 3D printed resin and cantilever arms to improve the strain exerted on a …

Statistical Machine Learning For Breast Cancer Detection With Terahertz Imaging, Tanny Andrea Chavez Esparza

Graduate Theses and Dissertations

Breast conserving surgery (BCS) is a common breast cancer treatment option, in which the cancerous tissue is excised while leaving most of the healthy breast tissue intact. The lack of in-situ margin evaluation unfortunately results in a re-excision rate of 20-30% for this type of procedure. This study aims to design statistical and machine learning segmentation algorithms for the detection of breast cancer in BCS by using terahertz (THz) imaging. Given the material characterization properties of the non-ionizing radiation in the THz range, we intend to employ the responses from the THz system to identify healthy and cancerous breast tissue …

Spatially Directed Functionalization By Co-Electropolymerization Of Two 3,4-Ethylenedioxythiophene Derivatives On Microelectrodes Within An Array, Benjamin J. Jones, Carol Korzeniewski, Jefferson H. Franco, Shelley D. Minteer, Ingrid Fritsch

Chemistry & Biochemistry Faculty Publications and Presentations

Electrodeposited conductive copolymer films with predictable relative properties (quantities of functional groups for further modification and capacitance) are of interest in sensors, organic electronic materials and energy applications. Potentiodynamic copolymerization of films in aqueous solutions of two different thiophene derivatives, (2,3-dihydrothieno[3,4-b]dioxin-2-yl) methanol (1) and 4-((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)-methoxy)-4-oxobutanoic acid (2), containing 0.02 M total monomer (0, 25, 34, 50, 66, 75, 100 mol% 2), 0.05 M sodium dodecyl sulfate, and 0.1 M LiClO4, on gold microelectrodes in an array was investigated. Decreasing monomer deposited (m) from 0 to 100 mol% 2 is attributed to a decreasing pH that inhibits electropolymerization. Molar ratios of …

Development Of A Comsol Microdialysis Model, Towards Creation Of Microdialysis On A Chip With Improved Geometries And Recovery, Patrick Pysz

Graduate Theses and Dissertations

Microdialysis (µD) sampling is a diffusion-limited sampling method that has been widely used in different biomedical fields for greater than 35 years. Device calibration for in vivo studies is difficult for current non-steady state analytes of interest correlated with both inflammatory response and microbial signaling molecules (QS); which exist in low ng/mL to pg/mL with molecular weights over a wide range of 170 Da to 70 kDa. The primary performance metric, relative recovery (RR), relating the collected sample to the extracellular space concentration varies from 10% to 60% per analyte even under controlled bench-top conditions. Innovations in microdialysis device design …

Evaluation Of Terahertz Imaging For Breast Cancer Detection Using Image Morphing, Tanny Andrea Chavez Esparza

Graduate Theses and Dissertations

This thesis proposes the use of a mesh morphing algorithm for the quantitative evaluation of terahertz (THz) images. This work differs from traditional evaluation methods based on qualitative evaluation because it provides a fair and quantitative measurement of the THz imaging system's performance. The objective of the algorithm is to match the alignment, shape, and resolution of the THz and reference pathology images. Therefore, the proposed morphing method provides a pathology reference for a pixel-by-pixel evaluation of the region classification in the THz image. To achieve this, the morphing algorithm aligns the images using the Pearson's correlation coefficient and reshapes …

3d Printed Pcu/Uhmwpe Polymeric Blends For Artificial Knee Meniscus, Raissa Araujo Borges

Graduate Theses and Dissertations

3D printing was used to fabricate porous artificial knee meniscus material from biocompatible polymeric blends of polycarbonate-urethane (PCU) and ultra-high-molecular-weight polyethylene (UHMWPE) to enable “weep” lubrication that mimics the native meniscus. 3D printed and molded pure PCU, as well as molded PCU and UHMWPE, were used for comparison. Preliminary printing was done to evaluate the impact of process parameters on the results. The samples were subject to a variety of rotational oscillating friction and wear tests under simulated body fluid and loading conditions to replicate the natural motion of the knee. Results show that 3D printed PCU samples yielded a …

Development Of An Oxygen Saturation Monitoring System By Embedded Electronics, Manikandan Venkatesan Gomathy

Graduate Theses and Dissertations

Measuring Oxygenation of blood (SaO2) plays a vital role in patient’s health monitoring. This is often measured by pulse oximeter, which is standard measure during anesthesia, asthma, operative and post-operative recoveries. Despite all, monitoring Oxygen level is necessary for infants with respiratory problems, old people, and pregnant women and in other critical situations.

This paper discusses the process of calculating the level of oxygen in blood and heart-rate detection using a non-invasive photo plethysmography also called as pulsoximeter using the MSP430FG437 microcontroller (MCU). The probe uses infrared lights to measure and should be in physical contact with any peripheral points …

Investigation Of Cnt-Induced Escherichia Coli Lysis And Protein Release, Abdollah Mosleh

Graduate Theses and Dissertations

This research investigated the use of carbon nanotubes (CNTs) as a treatment to increase the permeability of a bacterial cell wall. Recombinant Escherichia coli BL21 (DE3) containing a plasmid that expressed Green Fluorescent Protein (GFP) and -lactamase were exposed to CNTs under various levels of agitation for different times. Fluorescence assay for GFP, optical absorbance for -lactamase activity, and Transmission Electron Microscopy (TEM) were used to determine the amount of released protein, and visually examine the permeability enhancement of the cells, respectively. It was found that more -lactamase was present in the culture fluid after treatment with CNTs in a …

Design Of Smartseat Car Seat Safety System To Prevent Child Vehicular Heat Stroke, Alexis D. Lamott

Electrical Engineering Undergraduate Honors Theses

Child vehicular heatstroke deaths continue to be a preventable accident seen yearly. As such, a proposed safety system has been designed to monitor environmental temperatures and weight in an infant seat, to alert guardians that a young child is at risk of child vehicular heatstroke death or serious heatstroke related injury. The SmartSeat system is comprised of three separate printed circuit boards that work in unison to form the overall system.

Validation Of A Confocal Light Sheet Microscope Using Push Broom Translation For Biomedical Applications, Joshua Hutcheson

Graduate Theses and Dissertations

There exists a need for research of optical methods capable of image cytometry suitable for point-of-care technology. To propose am optical approach with no moving parts for simplification of mechanical components for the further development of the technology to the poin-of-care, a linear sensor with push broom translation method. Push broom translation is a method of moving objects by the sensor for an extended field of view. A polydimethylsiloxane (PDMS) microfluidic chamber with a syringe pump was used to deliver objects by the sensor. The volumetric rate of the pump was correlated to the integration time of the sensor to …

Experimental And Computational Studies Of Cortical Neural Network Properties Through Signal Processing, Wesley Patrick Clawson

Graduate Theses and Dissertations

Previous studies, both theoretical and experimental, of network level dynamics in the cerebral cortex show evidence for a statistical phenomenon called criticality; a phenomenon originally studied in the context of phase transitions in physical systems and that is associated with favorable information processing in the context of the brain. The focus of this thesis is to expand upon past results with new experimentation and modeling to show a relationship between criticality and the ability to detect and discriminate sensory input. A line of theoretical work predicts maximal sensory discrimination as a functional benefit of criticality, which can then be characterized …

Design Of An Assistive Technology Adaptive Switch Using An Inertial Measurement Unit, Ethan Storm Williams

Graduate Theses and Dissertations

A new assistive technology switch for people with disabilities was developed utilizing an Inertial Measurement Unit (IMU) as the sensor technology. The hardware can be customized through firmware to provide custom switch activations on a person by person basis. The firmware is customized to recognize specific data features in the IMU data which identify the desired switch activation movement performed by the user. In this way, the switch can be adapted to activate based on the movements of the user. During this research, the generic hardware platform, including the IMU sensor technology and Bluetooth communications, was designed and tested. An …

Polyethylene Oxide Nanofiber Production By Electrospinning, H. E. Schneider, J. G. Steuber, W. Du, M. Mortazavi, D. W. Bullock

Journal of the Arkansas Academy of Science

Electrospinning is an inexpensive technique that is used to produce nanofibers for a variety of applications. In electrospinning, a polymer solution is dispensed from a hypodermic-like syringe where an intense electric field attracts the solution to a collector while drawing the polymer into a very thin fiber. The diameter of the fiber can be controlled by tuning the process parameters such as the applied electric field, solution flow rate, distance between syringe tip and collector, and the collector geometry. In this paper we describe results from electrospinning poly(ethylene oxide) (PEO), a likely candidate for applications involving scaffolding for tissue engineering. …

Image Processing And Visualization Of Terahertz Pulsed Imaging Of Breast Cancer Tumors, Yuhao Wu

Graduate Theses and Dissertations

Terahertz imaging technology has grown substantially in recent years. With new advances made in the generation, manipulation, and detection of terahertz radiation, terahertz imaging has found its application as inspection tools in a wide range of areas including biomedicine, materials science, and aerospace industries. In the field of medical imaging, terahertz (THz) has emerged as a new imaging modality due to some fundamental physical properties of the THz wave. THz imaging has been used to examine various biological structures, and THz tomography has been developed to probe the 3D structures of those samples.

THz pulsed imaging (TPI) is one of …

Mobile Health Sensing With Smart Phones, Abby Logan Wise

Electrical Engineering Undergraduate Honors Theses

Depression is a serious mental condition affecting many Americans and people across the world. Postpartum depression is a form of depression affecting women who have recently gone through childbirth. Postpartum depression can have serious symptoms that may affect not only the mother, but her newborn as well. Early detection of these symptoms is of critical importance to the welfare of the mother and her child. Many medical professionals express the need for postpartum screening being that treatment has proven to be very effective. This project aims to make early symptom detection convenient and reliable for mothers with newborns. This will …

Interface Property Of Collagen And Hydroxyapatite In Bone And Developing Bioinspired Materials, Clint Paul

Inquiry: The University of Arkansas Undergraduate Research Journal

Bone at the nanoscale consists of type I collagen and hydroxyapatite (HAP). Type I collagen and HAP [Ca10(PO4)6(OH)2] are responsible for most of the structural integrity of bone. Collagen fibrils contain HAP platelets of varying size dispersed between the collagen. We investigate heterotrimeric collagen interaction with HAP using Steering Molecular Dynamics to obtain the force-displacement relation as the collagen is undergoing shearing and peeling on the surface of HAP. Results indicate that the collagen requires 40% less force to separate form the HAP surface under peeling, when compared to shear loading conditions. In both shearing and peeling, the number of …

Improving Golf Putt Performance With Statistical Learning Of Eeg Signals, Qing Guo

Graduate Theses and Dissertations

In this thesis, a machine learning based method is proposed to predict the putt outcomes of golfers based on their electroencephalogram (EEG) data. The method can be used as a core building block of a brain-computer interface, which is designed to provide guidance to golf players based on their EEG patterns. The proposed method includes three steps. First, multi-channel 1-second EEG trials were extracted during golfers' preparation of putting. Second, different features are calculated such as correlation coefficient, power spectrum density and coherence, which are used as features for the classification algorithm. To predict golfers' performance, the support vector machine …

Reading And Wirelessly Sending Eeg Signals Using Arduinos And Xbee Radios To Control A Robot, Andrew Paul Simms

Electrical Engineering Undergraduate Honors Theses

The objective of this project is to develop an EEG device that can read brainwaves from an individual, analyze the data, and use the result to send a wireless signal using Arduinos and XBee Radios to a Boe-bot to perform an action. One of the goals of this project is to read EEG data with a higher sampling frequency than a previously manufactured EEG device. The second part of the project used the device developed to differentiate an individual’s thinking between right and left and then send a simple signal to a robot using an XBee radio to perform an …

Measuring Pain Withdrawal Threshold Using A Novel Device In "Pseudo-Continuous" Mode, A. H. Walker, S. Thurman, N. Martinez, S. Burns, M. Dobretsov

Journal of the Arkansas Academy of Science

The study of pain and analgesia is an important area of biomedical research that has led to a significant number of advances in the treatment of acute and chronic pain. This study introduces a novel approach to mechanical testing of pain withdrawal of a rat hind paw to a stimulus. This systematic method involves a modified electronic esthesiometer controlled by an IDEA drive that allows for consistency in experiments. The device gives the experimenter computer control of the step size and velocity of approach of the probe stimulus. We discuss here some of the limitations in the current techniques used …

Development And Evaluation Of Chitosan Particle Based Antigen Delivery Systems For Enhanced Antigen Specific Immune Response, Bhanuprasanth Koppolu

Graduate Theses and Dissertations

Particle-based vaccine delivery systems are under exploration to enhance antigen-specific immunity against safe but poorly immunogenic polypeptide antigens. Chitosan is a promising biomaterial for antigen encapsulation and delivery due to its ability to form nano- and microparticles in mild aqueous conditions thus preserving the antigenicity of loaded polypeptides. The objective of this work is to develop a chitosan particle based antigen delivery system for enhanced vaccine response. Chitosan particle sizes, which ranged from 300 nm to 3 ìm, were influenced by chitosan concentration, chitosan molecular weight and addition rate of precipitant salt. The composition of precipitant salt played a significant …

Design And Fabrication Of Nanofluidic Systems With Integrated Sensing Electrodes For Rapid Biomolecule Characterization, Taylor Bradley Busch

Graduate Theses and Dissertations

A transparent nanofluidic system with embedded sensing electrodes was designed and fabricated by integrating Atomic Force Microscopy (AFM) nanolithography, Focused Ion Beam (FIB) milling and metal deposition, and standard microfabrication processing. The fabrication process started with the evaporation of chrome/gold (Cr/Au) onto a Pyrex 7740 wafer followed by photolithography and wet etching of the microchannels. The wafer was patterned a second time to form Au microelectrodes with 15-45 micrometer separation gaps in the nanochannel region. Sensing electrodes (up to one micron wide) were then deposited using FIB to bridge the gaps. The nanochannels were realized through both AFM nanolithography and …

The Geometry And Sensitivity Of Ion-Beam Sculpted Nanopores For Single Molecule Dna Analysis, Ryan Connor Rollings

Graduate Theses and Dissertations

In this dissertation, the relationship between the geometry of ion-beam sculpted solid-state nanopores and their ability to analyze single DNA molecules using resistive pulse sensing is investigated. To accomplish this, the three dimensional shape of the nanopore is determined using energy filtered and tomographic transmission electron microscopy. It is shown that this information enables the prediction of the ionic current passing through a voltage biased nanopore and improves the prediction of the magnitude of current drop signals when the nanopore interacts with single DNA molecules. The dimensional stability of nanopores in solution is monitored using this information and is improved …

Fabrication And Characterization Of Thinner Solid-State Nanopores, Denis Forbi Tita

Graduate Theses and Dissertations

Solid State nanopores that are fabricated by the ion beam sculpting process and electron beam drilling have shown great promise as a sensing device for DNA and protein molecules. Even though biological pores such as the alpha-Haemolysin have been in use for quite some time, the use of solid state Nanopores in single biomolecule detection has been on the rise since the mid 1990s. Solid State nanopores have an advantage over biological pores in that they are more robust, stable, and can be sculpted to any desired size for use in translocation experiments. One of the major challenges in Nanopore …