Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Simulation

Discipline
Institution
Publication Year
Publication
Publication Type

Articles 151 - 180 of 184

Full-Text Articles in Electrical and Computer Engineering

Frequency-Domain Measurement Method For The Analysis Of Esd Generators And Coupling, Jayong Koo, Qing Cai, Giorgi Muchaidze, Andrew Martwick, Kai Wang, David Pommerenke Jan 2007

Frequency-Domain Measurement Method For The Analysis Of Esd Generators And Coupling, Jayong Koo, Qing Cai, Giorgi Muchaidze, Andrew Martwick, Kai Wang, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

A method for analyzing electrostatic discharge (ESD) generators and coupling to equipment under test in the frequency domain is proposed. In ESD generators, the pulses are excited by the voltage collapse across relay contacts. The voltage collapse is replaced by one port of a vector network analyer (VNA). All the discrete and structural elements that form the ESD current pulse and the transient fields are excited by the VNA as if they were excited by the voltage collapse. In such a way, the method allows analyzing the current and field-driven linear coupling without having to discharge an ESD generator, eliminating …

Go to article

Design Of A Controller To Control Light Level In A Commercial Office, Saeid Javidbakht Jan 2007

Design Of A Controller To Control Light Level In A Commercial Office, Saeid Javidbakht

Browse all Theses and Dissertations

Proper amount of light in a business office is important for health and productivity of the employees. On a sunny day, there may be more than enough light entering the office from outside to carry out the necessary tasks. Presently, the main source of light in most offices is the fluorescent lamp. Thus, It is possible to save energy by dimming the fluorescent lamp. Dimming of the fluorescent lamp is possible by changing the frequency of the sinusoidal voltage or current. Hence, there is a need of a control system to adjust the light from the fixtures based on the …

Go to article

Modeling Liquid-Crystal Devices With The Three-Dimensional Full-Vector Beam Propagation Method, Qian Wang, Gerald Farrell, Yuliya Semenova Aug 2006

Modeling Liquid-Crystal Devices With The Three-Dimensional Full-Vector Beam Propagation Method, Qian Wang, Gerald Farrell, Yuliya Semenova

Articles

Simulation of light propagation within nematic liquid-crystal (LC) devices is considered, of which the director is aligned normal to the z axis. A three-dimensional full-vector finite-difference beam propagation method for an anisotropic medium is presented and an alternating direction implicit scheme is adopted. Simulations of light propagation in a bulk polarization converter, a waveguide with a LC covering layer, and an integrated polarization splitter and optical switch are presented. Comparison with an existing simulation method is carried out for beam behavior within the bulk polarization converter. The effect of strong surface anchoring of a LC cell on the beam behaviors …

Go to article

Simulation And Modeling Of Return Waveforms From A Ladar Beam Footprint In Usu Ladarsim, Scott E. Budge, B.C. Leishman, R.T. Pack May 2006

Simulation And Modeling Of Return Waveforms From A Ladar Beam Footprint In Usu Ladarsim, Scott E. Budge, B.C. Leishman, R.T. Pack

Electrical and Computer Engineering Faculty Publications

Ladar systems are an emerging technology with applications in many fields. Consequently, simulations for these systems have become a valuable tool in the improvement of existing systems and the development of new ones. This paper discusses the theory and issues involved in reliably modeling the return waveform of a ladar beam footprint in the Utah State University LadarSIM simulation software. Emphasis is placed on modeling system-level effects that allow an investigation of engineering tradeoffs in preliminary designs, and validation of behaviors in fabricated designs. Efforts have been made to decrease the necessary computation time while still maintaining a usable model. …

Go to article

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan Apr 2006

Analysis Of Technical Energy Losses By Using Simulation, Betrianis Betrianis, Randite Herawan

Makara Journal of Technology

Model is a representation of a system. Through model, it can be easier to forecast and control the changing of each element system. Electricity distribution is also a system. Losses are general problem that exist in a distribution network system. But with the right methods, specifically technical energy losses can be reduced in order to increase the efficiency. By making model of the distribution network, the value of technical energy losses in the whole network as well as in every line can be observed. Simulation can also be used to see all losses reduction alternatives. By comparing results from each …

Go to article

Patterns In Team Communication During A Simulation Game, David M. Baca, Ray Luechtefeld, Steve Eugene Watkins Jan 2006

Patterns In Team Communication During A Simulation Game, David M. Baca, Ray Luechtefeld, Steve Eugene Watkins

Engineering Management and Systems Engineering Faculty Research & Creative Works

The development of communication skills is a necessary preparation for effective engineering teamwork. Argyris' "Theory of Action" provides a framework for understanding patterns in team dialogue. Students can benefit from an awareness of these patterns. The theory highlights the detection and correction of errors by sharing information during group collaboration and interactions. Quality decision-making can be enhanced when members of a team develop high degrees of openness and interdependence. Quality decision-making can be diminished when members of a team regulate the information shared within the team. This work analyzes team interactions from simulation games used in an interdisciplinary engineering course …

Go to article

A Labview-Based Virtual Instrument For Engineering Education: A Numerical Fourier Transform Tool, Levent Sevgi̇, Çağatay Uluişik Jan 2006

A Labview-Based Virtual Instrument For Engineering Education: A Numerical Fourier Transform Tool, Levent Sevgi̇, Çağatay Uluişik

Turkish Journal of Electrical Engineering and Computer Sciences

Engineering is based on practice. The minima of this practice should be given during the university education. This has become more and more comprehensive and expensive parallel to high-technology devices developed and presented to societies. Computers, microprocessor-based devices, programmable systems on Chip (PSoC), etc., make engineering education not only very complex but interdisciplinary as well. Building undergraduate labs has become more and more expensive if only physical experimentation and hands-on training are targeted. On the other hand, simple, comparatively much cheaper software may turn a regular personal computer (PC) into a virtual lab. The key question therefore is, to establish …

Go to article

Simulation Model For Assessing Transient Performance Of Capacitive Voltage Transformers, I. Sule, Ganesh K. Venayagamoorthy, U. O. Aliyu Jan 2006

Simulation Model For Assessing Transient Performance Of Capacitive Voltage Transformers, I. Sule, Ganesh K. Venayagamoorthy, U. O. Aliyu

Electrical and Computer Engineering Faculty Research & Creative Works

In determining the correct operation of relays of a protection scheme, proper representation of instrument transformers and their behavior in conditions where there can be transient is very critical. This paper presents a simulation model for assessing the transient performance of capacitive voltage transformers (CVTs). In order to test the validity of the developed model, four CVT operational conditions are considered using field data collected from one of the Nigerian electric utility 330/132/33 kV substations. The model simulation results revealed various configuration performance responses that could affect relay protection schemes to different degrees. As expected, the CVT responses showed that …

Go to article

A Flexible Infrastructure For Multi-Agent Systems, Gerrit Addison N Sorensen Jul 2005

A Flexible Infrastructure For Multi-Agent Systems, Gerrit Addison N Sorensen

Theses and Dissertations

Multi-Agent coordination and control has been studied for a long time, but has recently gained more interest because of technology improvements allowing smaller, more versatile robots and other types of agents. To facilitate multi-agent experiments between heterogeneous agents, including robots and UAVs, we have created a test-bed with both simulation and hardware capabilities. This thesis discusses the creation of this unique, versatile test-bed for multi-agent experiments, also a unique graph creation algorithm, and some experimental results obtained using the test-bed.

Go to article

Pulse Regulation Control Technique For Integrated High-Quality Rectifier-Regulators, Mehdi Ferdowsi, Ali Emadi Feb 2005

Pulse Regulation Control Technique For Integrated High-Quality Rectifier-Regulators, Mehdi Ferdowsi, Ali Emadi

Electrical and Computer Engineering Faculty Research & Creative Works

The pulse regulation control scheme is presented and applied to the boost integrated flyback rectifier/energy storage dc/dc (BIFRED) converter as the most popular member of the integrated high-quality rectifier-regulators (IHQRR). In contrast to the conventional control techniques, the principal idea of pulse regulation is to regulate the output voltage using a series of high- and low-power pulses generated by the current of the input inductor, which is operating in discontinuous conduction mode (DCM). Analysis of the BIFRED converter operating in DCM is presented. Fundamentals of pulse regulation as well as its stability analysis and the estimation of the output voltage …

Go to article

Modeling And Simulation Of Long Term Degradation And Lifetime Of Deep-Submicron Mos Device And Circuit, Zhi Cui Jan 2005

Modeling And Simulation Of Long Term Degradation And Lifetime Of Deep-Submicron Mos Device And Circuit, Zhi Cui

Electronic Theses and Dissertations

Long-term hot-carrier induced degradation of MOS devices has become more severe as the device size continues to scale down to submicron range. In our work, a simple yet effective method has been developed to provide the degradation laws with a better predictability. The method can be easily augmented into any of the existing degradation laws without requiring additional algorithm. With more accurate extrapolation method, we present a direct and accurate approach to modeling empirically the 0.18-ìm MOS reliability, which can predict the MOS lifetime as a function of drain voltage and channel length. With the further study on physical mechanism …

Go to article

Modeling Yield Of Carbon-Nanotube/Silicon-Nanowire Fet-Based Nanoarray Architecture With H-Hot Addressing Scheme, Shanrui Zhang, Minsu Choi, Nohpill Park Oct 2004

Modeling Yield Of Carbon-Nanotube/Silicon-Nanowire Fet-Based Nanoarray Architecture With H-Hot Addressing Scheme, Shanrui Zhang, Minsu Choi, Nohpill Park

Electrical and Computer Engineering Faculty Research & Creative Works

With molecular-scale materials, devices and fabrication techniques recently being developed, high-density computing systems in the nanometer domain emerge. An array-based nanoarchitecture has been recently proposed based on nanowires such as carbon nanotubes (CNTs) and silicon nanowires (SiNWs). High-density nanoarray-based systems consisting of nanometer-scale elements are likely to have many imperfections; thus, defect-tolerance is considered one of the most significant challenges. In this paper we propose a probabilistic yield model for the array-based nanoarchitecture. The proposed yield model can be used (1) to accurately estimate the raw and net array densities, and (2) to design and optimize more defect and fault-tolerant …

Go to article

An Extrapolation Procedure To Shorten Time Domain Simulations, Giuseppe Selli, James L. Drewniak, David Pommerenke Aug 2004

An Extrapolation Procedure To Shorten Time Domain Simulations, Giuseppe Selli, James L. Drewniak, David Pommerenke

Electrical and Computer Engineering Faculty Research & Creative Works

Time-domain simulation algorithms are widely used in the anaylsis and design of electromagnetic systems. Many of them are characterized by high Q's. Thus, the simulations have to employ many time steps in order to achieve a complete characterization of these systems. This time-consuming computational effort can be avoided if the late instants of time are extrapolated by applying a parametric estimation algorithm. An optimized implementation of a time-domain extrapolation method and a stop criterion are discussed in this paper. The latter criterion is based upon a normalized squared difference between the waveforms extrapolated from two different sets of initial data …

Go to article

Autonomous Environmental Mapping In Multi-Agent Uav Systems, Linus Jan Luotsinen Jan 2004

Autonomous Environmental Mapping In Multi-Agent Uav Systems, Linus Jan Luotsinen

Electronic Theses and Dissertations

UAV units are by many researchers and aviation specialists considered the future and cutting edge of modern flight technology. This thesis discusses methods for efficient autonomous environmental mapping in a multi-agent domain. An algorithm that emphasizes on team work by sharing the agents local map information and exploration intentions is presented as a solution to the mapping problem. General theories on how to model and implement rational autonomous behaviour for UAV agents are presented. Three different human and tactical behaviour modeling techniques are evaluated. The author found the CxBR paradigm to be the most interesting approach. Also, in order to …

Go to article

Quantization With Knowledge Base Applied To Geometrical Nesting Problem, Grzegorz Chmaj, Leszek Koszalka Jan 2004

Quantization With Knowledge Base Applied To Geometrical Nesting Problem, Grzegorz Chmaj, Leszek Koszalka

Electrical & Computer Engineering Faculty Research

Nesting algorithms deal with placing two-dimensional shapes on the given canvas. In this paper a binary way of solving the nesting problem is proposed. Geometric shapes are quantized into binary form, which is used to operate on them. After finishing nesting they are converted back into original geometrical form. Investigations showed, that there is a big influence of quantization accuracy for the nesting effect. However, greater accuracy results with longer time of computation. The proposed knowledge base system is able to strongly reduce the computational time.

Go to article

Evolving Models From Observed Human Performance, Hans Karl Gustav Fernlund Jan 2004

Evolving Models From Observed Human Performance, Hans Karl Gustav Fernlund

Electronic Theses and Dissertations

To create a realistic environment, many simulations require simulated agents with human behavior patterns. Manually creating such agents with realistic behavior is often a tedious and time-consuming task. This dissertation describes a new approach that automatically builds human behavior models for simulated agents by observing human performance. The research described in this dissertation synergistically combines Context-Based Reasoning, a paradigm especially developed to model tactical human performance within simulated agents, with Genetic Programming, a machine learning algorithm to construct the behavior knowledge in accordance to the paradigm. This synergistic combination of well-documented AI methodologies has resulted in a new algorithm that …

Go to article

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika Dec 2003

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika

Tanzania Journal of Engineering and Technology (TJET)

Prediction of the performance of comminution equipment by mathematical models and simulation poses a great challenge to the chemical engineer. This paper describes the simulation of grinding results obtained using an impact mill. Single particle results have been used to generate breakage and selection coefficients that were used for the evaluation of the model. Results have shown that simulation model is in good agreement with the experimental data obtained at a circumferential speed above 60 m/s. At lower speeds, the models shows only partial agreement in the middle particle size ranges. The application of the model is therefore limited for …

Go to article

Fdtd Method Capable Of Attaching Rectangular Domains, Kai Xiao, David Pommerenke, James L. Drewniak Aug 2003

Fdtd Method Capable Of Attaching Rectangular Domains, Kai Xiao, David Pommerenke, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

A finite-difference time-domain (FDTD) method capable of attaching rectangular computational domains is proposed herein. The aim of this approach is to reduce the size of computational domain according to the geometry of the modeled structure so as to reduce the simulation time with keeping precision of the result in an acceptable range. A multigrid algorithm is applied on the attaching interface between two rectangular domains so that different resolution can be achieved in different domains.

Go to article

Modeling Issues For Full-Wave Numerical Emi Simulation, Michael A. Cracraft, Xiaoning Ye, Chen Wang, Sandeep K. R. Chandra, James L. Drewniak Aug 2003

Modeling Issues For Full-Wave Numerical Emi Simulation, Michael A. Cracraft, Xiaoning Ye, Chen Wang, Sandeep K. R. Chandra, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

In electromagnetic modeling, agreement between modeling and measurements is a common goal. There are questions that define every model. What is to be modeled? How is it going to be modeled? At what scale is it to be modeled? Through sample results and discussion, this paper addresses some general and some specific elements of model veracity. Through determination, numerical models can certainly be pushed to match any measured results. However, in the end the question that this paper addresses is not necessarily "How good can this model be?" as it is "Is this model good enough?".

Go to article

An Industrial Food Processing Plant Automation Using A Hybrid Of Pi And Fuzzy Logic Control, Ganesh K. Venayagamoorthy, D. Naidoo, P. Govender Jan 2003

An Industrial Food Processing Plant Automation Using A Hybrid Of Pi And Fuzzy Logic Control, Ganesh K. Venayagamoorthy, D. Naidoo, P. Govender

Electrical and Computer Engineering Faculty Research & Creative Works

An industrial food processing plant consisting of nonlinear dynamics requires pressure and temperature controllers to be nonlinear. In this paper, nonlinear controllers are designed using fuzzy logic to augment the conventional pressure and temperature PI controllers for an industrial food processing plant. Simulation results are presented to show improvement in the plant response with the hybrid controllers.

Go to article

Simulation Study And Instability Of Adaptive Control, Zhongshan Wu Jan 2001

Simulation Study And Instability Of Adaptive Control, Zhongshan Wu

LSU Master's Theses

The Minimum-degree Pole Placement algorithm for Self-tuning Regulator design and the Recursive Least-square method and the projection algorithm for plant estimation are studied first in this thesis. Simulation studies for the estimator and controller algorithms are mainly undertaken after describing how to use MATLAB S-function in detail. Not only do Simulation experiments illustrates how and how well the MDPP and RLS algorithms work, but also show how to write and debug MATLAB codes for S-function programs. The robustness of the adaptive control system is intensively discussed subsequently. By using an estimator resistant to the noise contamination, the adaptive control system …

Go to article

The Effect Of Registration Errors On Tracking In A Networked Radar System, Bradley J. Mortenson Mar 1999

The Effect Of Registration Errors On Tracking In A Networked Radar System, Bradley J. Mortenson

Theses and Dissertations

To successfully combine information from distributed radar sensors, it is essential that each sensor be correctly referenced in a global coordinate system. If there are biases in the reported position of these sensors, the reported target position will also be biased and the ensuing global estimate of the target position will be degraded. Furthermore, any biases in range or azimuth measurements of these sensors will likewise be reflected in the degradation of global estimate of target position. Registration is the process of ensuring that these errors do not result in the creation of an additional redundant target when only a …

Go to article

Global Positioning System (Gps) Receiver Design For Multipaths Mitigation, El-Sayed Abdel-Salam Gadallah Aug 1998

Global Positioning System (Gps) Receiver Design For Multipaths Mitigation, El-Sayed Abdel-Salam Gadallah

Theses and Dissertations

Multipath effects are a source of error degrading the accuracy of DGPS signal processing. The statistical models of multipath are determined by user location and, in addition are time varying. There is no unified statistical model for the multipath signal. Therefore the solution of the multipath problem using statistical models is difficult. This research introduces a new estimator that can detect the presence of multipath, can determine the unknown number of multipath components and can estimate multipath parameters in the GPS receiver (time delay and attenuation coefficients). Furthermore the multipath signal parameters are estimated at any instant of observation. The …

Go to article

Effects Of Clutter Height Distribution On Adaptive Clutter Erasure Performance, Kelce Steven Wilson Jun 1998

Effects Of Clutter Height Distribution On Adaptive Clutter Erasure Performance, Kelce Steven Wilson

Theses and Dissertations

A new real beam interferometric processing technique, called Adaptive Clutter Erasure (ACE), is investigated for applicability to ground clutter suppression in airborne radar systems. By analysis and simulation, the viability of the ACE concept as a next generation clutter suppression technique is demonstrated to achieve performance enhancements commensurate with currently implemented techniques. Research results indicate the ACE concept provides a reliably consistent 10dB Signal-to-Clutter Ratio (SCR) advantage over the APG-63, an operational radar system used for baseline comparison. ACE system concept development and performance predictions are conducted in conformity with the physical and operational design parameters of the APG-63, namely …

Go to article

Simulation Studies With A Continuously Online Trained Artificial Neural Network Controller For A Micro-Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley Jan 1998

Simulation Studies With A Continuously Online Trained Artificial Neural Network Controller For A Micro-Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

This paper reports on the simulation studies carried out using MATLAB/SIMULINK and the practical implementation of a continuously online trained (COT) artificial neural network (ANN) controller to identify the continuous changing complex nonlinear dynamics of the power system, and another COT ANN to control a micro-turbogenerator which consists of a turbine simulator and a micro-alternator connected to an infinite bus through a short transmission line in a laboratory environment. This neural network controller augments/replaces the traditional automatic voltage regulator (AVR) and the turbine governor of the generator. Simulation and practical results are presented to show that this COT ANN identifier/controller …

Go to article

Visualization And Animation Of A Missile/Target Encounter, Jeffrey T. Bush Dec 1997

Visualization And Animation Of A Missile/Target Encounter, Jeffrey T. Bush

Theses and Dissertations

Existing missile/target encounter modeling and simulation systems focus on improving probability of kill models. Little research has been done to visualize these encounters. These systems can be made more useful to the engineers by incorporating current computer graphics technology for visualizing and animating the encounter. Our research has been to develop a graphical simulation package for visualizing both endgame and full fly-out encounters. Endgame visualization includes showing the interaction of a missile, its fuze cone proximity sensors, and its target during the final fraction of a second of the missile/target encounter. Additionally, this system displays dynamic effects such as the …

Go to article

A Single Chip Low Power Implementation Of An Asynchronous Fft Algorithm For Space Applications, Bruce W. Hunt Dec 1997

A Single Chip Low Power Implementation Of An Asynchronous Fft Algorithm For Space Applications, Bruce W. Hunt

Theses and Dissertations

A fully asynchronous fixed point FFT processor is introduced for low power space applications. The architecture is based on an algorithm developed by Suter and Stevens specifically for a low power implementation. The novelty of this architecture lies in its high localization of components and pipelining with no need to share a global memory. High throughput is attained using large numbers of small, local components working in parallel. A derivation of the algorithm from the discrete Fourier transform is presented followed by a discussion of circuit design parameters specifically, those relevant to space applications. The generic architecture is explained with …

Go to article

Comparison Of Three Clustering Algorithms And An Application To Color Image Compression, Jihun Cha, Laurene V. Fausett Apr 1997

Comparison Of Three Clustering Algorithms And An Application To Color Image Compression, Jihun Cha, Laurene V. Fausett

Electrical Engineering and Computer Science Faculty Publications

This paper investigates a traditional clustering algorithm (K-means) and two neural networks (SOM and ART-F). The characteristics of each algorithm are illustrated by simulating geometric space data clustering. Then each algorithm is applied to image data sets to compress the size by reducing the number of colors from 256 to 16.

Go to article

Fdtd Modeling Of Thin Wires For Simulating Common-Mode Radiation From Structures With Attached Cables, David M. Hockanson, James L. Drewniak, Todd H. Hubing, Thomas Van Doren Aug 1995

Fdtd Modeling Of Thin Wires For Simulating Common-Mode Radiation From Structures With Attached Cables, David M. Hockanson, James L. Drewniak, Todd H. Hubing, Thomas Van Doren

Electrical and Computer Engineering Faculty Research & Creative Works

The analysis of shielding enclosures is complicated by the existence of apertures and cables. The finite-difference time-domain (FDTD) method can model shielding enclosures with complex geometries, but has difficulty modeling wires and cables of arbitrary radii. Modeling the wire by setting the axial component of the electric field to zero in the FDTD results in a wire with a radius determined by the mesh discretisation. Neglecting wire radius in applications such as electromagnetic interference (EMI) or printed circuit board modeling may result in gross errors because near field quantities are typically sensitive to wire thickness. Taflove (1990) developed a wire …

Go to article

Analysis Of A Current-Regulated Brushless Dc Drive, Keith Corzine, S. D. Sudhoff, H. J. Hegner Jan 1995

Analysis Of A Current-Regulated Brushless Dc Drive, Keith Corzine, S. D. Sudhoff, H. J. Hegner

Electrical and Computer Engineering Faculty Research & Creative Works

Current-regulated brushless DC machines are used in a wide variety of applications including robotics, actuators, electric vehicles, and ship propulsion systems. When conducting system analysis of this or any other type of drive, average-value reduced-order models are invaluable since they provide a means of rapidly predicting the electromechanical dynamics and are readily linearized for control system synthesis. In this paper, a highly accurate average-value reduced-order model of a hysteresis current-regulated brushless DC drive is set forth. In so doing it is demonstrated that the drive exhibits five distinct operating modes. The physical cause of each of these modes is explained …

Go to article

First Prev Next Last