Electrical and Computer Engineering Commons^™

Multi-Parameter Optimization And Adaptive Temperature Compensation For Fbg Strain Sensors In Wide-Temperature-Range Aerospace Applications, Ruling Zhou, Jiacheng Yu, Yutang Dai, Jianguan Tang, Minghong Yang, Farhan Mumtaz

Electrical and Computer Engineering Faculty Research & Creative Works

Accurate strain measurement in cryogenic fuel pipelines is crucial for ensuring the structural integrity and reliability of rocket engine systems operating under extreme thermal conditions. Fiber Bragg grating (FBG) sensors show significant potential for such applications; however, their inherent temperature-strain cross-sensitivity limits performance over wide temperature ranges. This research presents an enhanced compensation strategy combining multi-parameter optimization with temperature-zone-specific adaptation to improve the accuracy and stability of FBG-based strain sensing in harsh aerospace environments. Four special steel substrate materials including S03, S06, S07, and 1Cr18Ni9Ti, were evaluated using strain transfer theory and thermo-mechanical coupling simulations. Genetic algorithms optimized key design …

Safe Optimal Control Framework For Cooperative Manipulation Of Objects In Human–Robot Teams, Irfan Ganie, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article introduces a distributed deep neural network (NN)-based adaptive control framework for cooperative object manipulation in human–robot teams with unknown agent dynamics by using three distinct multilayer NN observers (MNNOs). The first observer, termed the reference point estimator, enables each robotic agent to estimate the object's reference center using consensus-based learning, even without direct access to global reference trajectories. The second observer, referred to as the human force-to-trajectory estimator, uses human-applied forces to infer the intended position, velocity, and acceleration of the object, enabling real-time estimation of human intent. Together, these two observers allow distributed estimation of human-intended motion. …

Integrating Optical And Radiofrequency Interferometry For Enhanced Phase Sensing, Ruimin Jie, Zhaopeng Zhang, Chen Zhu, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Interferometry is a crucial investigative technique used across diverse fields to achieve high-precision measurements. It works by analyzing the phase difference between two interfering waves, which results from variations in optical path lengths within an interferometer. We introduce a novel method for directly measuring changes in the phase difference within an optical interferometer, importantly, with the added advantage of a controllable enhancement factor. This approach is achieved through a two-step process: first, the optical phase difference is encoded into a sub-GHz radiofrequency (RF) signal using microwave-photonic manipulation; then, RF interferometry-assisted phase amplification is implemented at the destructive interference point. In …

Enhancing Measurement Accuracy: The Impact Of Missing Data On Parameter Estimation In Mass-Spring-Damper Systems, Michkath Omanda Bouraima, Steven Thompson, Maciej J. Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

In sensor-driven dynamic systems, missing data can severely degrade parameter estimation accuracy. This article investigates the impact of missing data on phase estimation in a mass-spring-damper system using an information-theoretic framework based on the Cramér-Rao Lower Bound (CRLB). Closed-form CRLB expressions are derived for four scenarios: complete data, missing completely at random (MCAR) deletion, MCAR-based imputation, and missing at random (MAR) missingness via a selection-weighted formulation. These bounds are used as theoretical benchmarks to evaluate classical imputation methods (last observation carried forward (LOCF), linear interpolation) and advanced approaches (Kalman filtering, Rauch-Tung-Striebel (RTS) smoothing, Bayesian inference, and transformer-based imputation) through Monte …

Performance Analysis And Optimization Of Fructose Memristor-Based Neuromorphic Systems, Harshvardhan Uppaluru, Shakil Mahmud Jiban, Shah Zayed Riam, Feng Zhao, Jinhui Wang

Electrical and Computer Engineering Faculty Research & Creative Works

Natural organic memristors have demonstrated promising synaptic behavior, positioning them as strong candidates for synaptic devices in neuromorphic systems. This paper presents the fabrication and evaluation of a neuromorphic system based on natural organic 16-level and 32-level fructose memristors. First, the manufacturing process of fructose memristors is described in detail. Second, the nonlinear property associated with fructose memristors is investigated, and an optimization method is applied to address the nonlinear effects. The performance of the fructose memristor-based neuromorphic system on MNIST with a multi-layer perceptron and on CIFAR-10 with VGG-8 is evaluated and reported under various conditions -with/without nonlinearity optimization …

Online Lifelong Optimal Adaptive Control Of Partially Uncertain Strict Feedback Discrete-Time Systems With Application To Quadrotor Uavs, Maxwell Geiger, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This article considers the infinite time horizon optimal adaptive tracking control of partially uncertain strict feedback discrete-time (DT) systems with application to quadrotor uncrewed aerial vehicles (UAVs). First, the strict feedback DT system is transformed into an equivalent affine nonlinear DT system in terms of the tracking error dynamics. The optimal adaptive tracking control problem is solved using an augmented system approach, where a horizon of future bounded reference trajectory points is used in the augmented state, when compared to using a single point. It is assumed that the internal dynamics of the strict feedback system are unknown, but the …

New Metrics For Disambiguating Feature Overlap And Catastrophic Forgetting In Incremental Learning Contexts, Niklas M. Melton, Leonardo Enzo Brito Da Silva, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Catastrophic forgetting remains a central challenge in lifelong learning, where newly acquired knowledge interferes with previously learned tasks, degrading performance over time. Mitigation strategies such as rehearsal and regularization have been proposed, but both introduce limitations, either by retaining old data or by constraining model updates in ways that may impair learning. Complicating matters, recent findings show that feature-space overlap between tasks can produce similar performance drops even in models that memorize data, making it difficult to distinguish true forgetting from representational interference. Current accuracy-based metrics fail to disentangle these effects, undermining diagnostic clarity. In this work, we introduce the …

Fixed-Time Consensus Tracking For Nonlinear Multi-Agent Systems Under Aperiodically Intermittent Control, Lei Xue, Tong Wu, Wenwen Jia, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article explores the problem of fixed-time consensus tracking (FT-CT) for nonlinear multi-agent systems utilizing the a periodically intermittent control (AIC) strategy. In contrast to existing control algorithms, the proposed algorithm utilizes the AIC strategy instead of the conventional continuous-time control strategy, effectively reducing the consumption of communication resources. Moreover, the problem of intermittent FT-CT is well handled by proposing the average control rate of the AIC strategy. Two theorems based on the cases of directed and undirected graphs are proposed, respectively. Finally, the validity of these results is confirmed through numerical simulations on a general nonlinear system and a …

Rf-Attennet: A Hybrid Attention-Enhanced Network For Mixed Signal Classification In Uav Swarm Detection, Prajoy Podder, Mohammad Atikur Rahman, Maciej Zawodniok, Sanjay Madria

Electrical and Computer Engineering Faculty Research & Creative Works

The continuous increase of UAVs, particularly in swarms, creates significant challenges for security and airspace regulation. Traditional RF fingerprinting methods struggle to detect and classify UAV swarms due to overlapping signals and interference. This study introduces RF-AttenNet, a hybrid deep learning model designed to classify mixed UAV signals by analyzing composite RF spectrograms. RF-AttenNet uses dual attention mechanisms, channel and spatial attention to focus on critical spectral features, enabling the model to effectively separate and identify overlapping UAV signals. We have developed custom composite UAV datasets that simulate real-world swarm interference, incorporating both single and mixed UAV classes. RF-AttenNet achieves …

Effect Of Process Parameters On Thermal Response Of An Oxy-Fuel Burner/Injector Panel In An Electric Arc Furnace Via Fiber Optic Sensors, Mobashir Ahmed, Rony Kumer Saha, Koustav Dey, Todd Sander, Jie Huang, Ronald J. O'Malley

Electrical and Computer Engineering Faculty Research & Creative Works

Modern oxy-fuel burner/injectors in electric arc furnaces (EAFs) play a critical role in scrap melting, liquid steel refining, and slag foaming. However, varying operational modes, combined with dynamic process conditions, such as arcing and slag behavior, can expose the injector panel surface to intense thermal conditions that can compromise efficiency and safety. Conventional monitoring techniques, including cooling water temperature measurements and thermocouples, fail to capture localized thermal anomalies due to their limited spatial resolution and susceptibility to electromagnetic interference. In this study, four high-resolution Rayleigh backscattering-based fiber optic sensors, interrogated via optical frequency domain reflectometry, were embedded in top and …

Real-Time Multiregional Market-To-Market Congestion Management Through Exchange Of Relief Cost Curve, Haotian Chen, Yonghong Chen, Jose Daniel Lara, Jarrad Wright, Matthew Bossart, Sebastian De Jesus Machado, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a novel method for multiregional market-to-market (M2M) coordinated congestion management. It identifies shortcomings in existing M2M approaches, where Regional Transmission Organizations (RTOs) exchange shadow prices and relief requests to optimize congestion relief allocations across interconnected regions. Two methods are proposed to enhance flow and price convergence. The first method proposes that both Regional Transmission Organizations (RTOs) use state-estimator flows directly to determine relief requirements, eliminating delays and potential oscillations caused by using market flows calculated from the prior period under existing M2M approach. The second method involves exchanging transmission relief cost curves, enabling each RTOs to integrate …

Sapphire Optical Fiber Bragg Grating Sensors Based On Dispersive Microwave-Photonic Frequency-Time Domain Analysis, Ruimin Jie, Chen Zhu, Farhan Mumtaz, Koustav Dey, Bohong Zhang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Sapphire fiber Bragg gratings (SFBGs) have attracted growing interest for high temperature sensing in harsh environments, yet their interrogation typically relies on optical spectrum measurements, demanding a high-resolution optical spectrum analyzer (OSA) that is bulky, expensive, and constrained in acquisition speed. Moreover, the inherently multimode nature of sapphire fiber further complicates spectrum-based demodulation, thereby limiting the achievable sensing resolution. In this paper, we propose and experimentally demonstrate a microwave-photonic interrogation approach for SFBG sensors. Instead of measuring the optical reflection spectrum, the complex frequency response in the microwave domain of an SFBG is acquired using a vector network analyzer (VNA) …

Honey-Cnt Memristive Artificial Synaptic Device For Sustainable Neuromorphic Computing System, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru, Jinhui Wang, Kuan Yew Cheong, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

Brain-inspired neuromorphic computing systems require hardware components analogous to biological neurons and synapses. Honey based natural organic memristor has demonstrated promising nonvolatile memristive behaviors, with the advantages of sustainability, environmentally friendliness, and low-cost manufacturing. In this study, carbon nanotubes (CNTs) are added in honey to fabricate honey-CNT memristive artificial synaptic devices. Honey-CNT film is characterized by micro-Raman spectroscopy and the distribution of CNT bundles embedded in the honey-CNT composite layer by cross-sectional scanning electron microscopy for the first time. Critical synaptic functions of the honey-CNT memristor, including spike-rate-dependent plasticity, spike voltage dependent plasticity, learn-forget-relearn, and supralinear spatial summation are revealed, …

Corrections To: Enhancing Measurement Accuracy: The Impact Of Missing Data On Parameter Estimation In Mass-Spring-Damper Systems (Ieee Transactions On Instrumentation And Measurement (2026) 75 (1–12) Doi: 10.1109/Tim.2026.3676091), Michkath Omanda Bouraima, Steven Thompson, Maciej J. Zawodniok

Electrical and Computer Engineering Faculty Research & Creative Works

In the above article [1], a wording ambiguity appears in Proposition 4 regarding the description of the missing at random (MAR) mechanism. The published sentence states that the probability of observing the kth sample depends on the realized measurement value. This wording may be interpreted as dependence on the current unobserved value y[tk], which could suggest a missing not at random (MNAR) mechanism. The intended MAR mechanism is that the observation probability for the kth sample depends only on previously observed measurement information, such as y[tk-1], and not on the current unobserved value y[tk]. Therefore, the corrected wording clarifies that …

Resolving Stiffness Trade-Offs In Simultaneous Pressure And Vibration Sensing Using A Corrugated-Tube Fiber-Optic Sensor, Yizheng Chen, Yan Tang, Jie Huang, Qi Zhang, Biyao Shi, Zewei Wu

Electrical and Computer Engineering Faculty Research & Creative Works

This article proposes and experimentally demonstrates a corrugated-tube-based fiber-optic sensor capable of measuring pressure, vibration, or both simultaneously. To address the limited sensitivity of conventional diaphragm-based designs, the sensor incorporates an optimized corrugated tube that balances the conflicting stiffness requirements for pressure and vibration measurements. The corrugated tube, acting as a mechanical transducer, is integrated with an extrinsic fiber-optic Fabry–Perot interferometer (EFPI). The EFPI cavity is formed between a reflective surface at the sealed end of the corrugated tube and the cleaved end face of an optical fiber fixed within a mounting assembly. In this configuration, displacement of the corrugated …

Multi-Agent Reinforcement Learning Driven Package Pdn Design Automation, Haran Manoharan, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The design of package-level power delivery networks (PDNs) has become increasingly challenging as modern high-performance systems demand higher currents. Existing PDN design flows treat ball map assignment, stackup selection, and power plane routing as separate, largely manual steps, leading to long iteration times and limited scalability. This work proposes a unified and automated package PDN design framework based on multi-agent reinforcement learning (MARL). Each power domain is modeled as an agent, with specialized agents responsible for ball map assignment, routing layer selection, and power plane synthesis. A central controller coordinates agent decisions using a global reward that captures electrical and …

Nash Equilibrium Strategies For Multicluster Pursuit–Evasion Game With Disturbances: A Prescribed-Time Convergence Approach, Lei Xue, Xian Yu, Yongbao Wu, Jian Liu, Changyin Sun, D. C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article investigates the problem of prescribed-time Nash equilibrium (NE) seeking for a multicluster pursuit–evasion game (PEG) subject to external disturbances. To mitigate the impact of disturbances and reach the NE within a user-defined prescribed time, a prescribed-time disturbance observer (PTDO) is devised to estimate and compensate for them. Based on this observation, a novel control algorithm is developed, which facilitates collaboration among multiple pursuers to capture multiple evaders within the prescribed time. It is theoretically demonstrated that the designed algorithm ensures prescribed-time convergence to the NE of the multicluster PEG with disturbances. Finally, numerical simulations are conducted to verify …

Transformer-Customer Relationship Identification Based On Load-Switching Fluctuation Characteristics Considering Same-Feeder-Adjacent-Transformer Condition, Yanan Zhang, Gan Zhou, Yuyuan Liu, Wei Gu, Yanjun Feng, Yujue Wang, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Accurately identifying the connectivity between transformers and downstream three-phase customers in low-voltage distribution networks is challenging, because voltage curves of different phases and nearby nodes can be weakly distinguishable, especially when adjacent transformers on the same feeder serve geographically close customers with highly similar voltage curves. This paper proposes a novel method based on load-switching fluctuation characteristics recorded by smart meters. By extracting localized current and voltage fluctuations and establishing correlation matching, the method overcomes the limited discriminability using steady-state measurements. The method operates in two stages: first, switching-induced fluctuation characteristics are extracted and matched to cluster customers by the …

Deep Learning Based High-Resolution Electromagnetic Inversion Imaging Using Deep Convolutional Double-Module Structure, He Ming Yao, Shiji Song, Lijun Jiang, Michael Ng

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel deep learning (DL) approach has been proposed to realize high-resolution electromagnetic (EM) inversion imaging. The newly proposed approach is based on the deep convolutional double-module structure (DCDMS), consisting of the pixel-interpolating module and the corresponding quality-improving module. While the pixel-interpolating module roughly increases the 'resolution' of the initial input, the following quality-improving module realizes quantitative EM imaging in high resolution. The input of the proposed DCDMS adopts the mixed input scheme, consisting of the received EM scattered field and the initial reconstruction in much low resolution computed from Gauss-Newton method. The output of the proposed …

Lidar-Based Framework For Detecting Suspicious Human Activities, Ahd Aljumah, Charalampos Antoniadis, Hakim Ghazzai, Nawfal Guefrachi, Ahmad Alsharoa, Gianluca Setti

Electrical and Computer Engineering Faculty Research & Creative Works

This study explores the development of Human Activity Recognition (HAR) systems capable of identifying suspicious activities to enhance security in public spaces. We propose an innovative solution that integrates LiDAR sensors with deep learning technologies. Our method employs advanced models operating on LiDAR point cloud, PV-RCNN for human detection, and LidarGait++ for classifying activities into categories such as standing or walking (non-suspicious) and sneaking or fighting (suspicious). Due to the scarcity of suitable real-world datasets for training such systems, we utilize a 3D simulation tool, Blender, to create realistic environments and generate labeled point cloud data. This synthetic dataset allows …

Enhancing Explainable Ai For Medical Imaging: Improved Lime Interpretation With Influence Mapping, Abiha Tahsin Chowdhury, Dhanush Bavisetti, Daniel B. Hier, Rahul Dubey, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

The integration of artificial intelligence (AI) into medical imaging is progressing rapidly. It is essential for these AI tools to be transparent, interpretable, and explainable to gain the trust of clinicians and regulators. Current state-of-the-art explainable AI (XAI) techniques in imaging includes Local Interpretable Model-Agnostic Explanations (LIME), Shapley Additive Explanations (SHAP), and Gradient-weighted Class Activation Mapping (Grad-CAM). Recent studies have shown that LIME often suffers from inconsistency and unreliability which limits their utility in sensitive fields like medical imaging. This paper proposes Influence Map based Explanation (IME), an enhanced variant of the original LIME framework, that aggregates multiple runs to …

Event-Based Predefined-Time Synchronization For Complex Networks With Deception Attacks: An Asynchronously Intermittent Strategy, Lei Xue, Jiong Yu, Haoyu Zhou, Yongbao Wu, Jian Liu, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article studies the practical predefined-time synchronization (PPTS) for complex networks (CNs) under deception attacks based on the asynchronously intermittent event-triggered control (AIE-TC). Notably, AIE-TC effectively integrates the advantages of asynchronously intermittent control (AIC) and event-triggered control, where AIC provides each subsystem node with independent control and rest intervals. Besides, all synchronization errors of the CNs converge to an adjustable neighborhood within the predefined time by designing a bounded time-varying function into the controller. Moreover, this article considers that the transmission network is subjected to stochastic deception attacks modeled by a Markov process, which captures the state-driven dynamic transition characteristics …

Deep Learning Approach For Microwave Imaging Based On Deep Convolutional Asymmetric Encoder-Decoder Structure And Physics-Induced Loss, He Ming Yao, Shiji Song, Michael Kwok Po Ng, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we introduce an innovative deep learning (DL) methodology designed for real-time quantitative microwave imaging (MWI). Our approach is centered around the utilization of a deep convolutional asymmetric encoder-decoder structure (DCAEDS), which requires only a single-frequency far-field measurement of the electromagnetic (EM) scattered field as input and subsequently predicts the contrasts (permittivities) of the target materials. During the offline training process, we incorporate an EM forward solver specifically crafted to compute the EM scattered field generated by the predicted target contrasts (permittivities) produced by the DCAEDS. The DCAEDS is seamlessly integrated with this EM forward solver to optimize …

Effect Of Sample Properties On Short-Circuited Waveguide Measurements For Materials Characterization, Alexander Hook, Jared Sinkey, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Microwave materials characterization measurements can be performed using a number of well-established approaches. One such approach, the filled transmission line approach featuring a short-circuited rectangular waveguide (SC-RWG) sample holder, is known to have sample placement restrictions related to measurement viability. This work focuses on this approach and addresses the measurement restrictions within the context of sample length and dielectric properties. The complex reflection properties, S11, of a sample placed in a SC-RWG sample holder are studied to quantitively define when a sample must be offset from the SC-end. The impact of the sample holder is also studied from a measurement …

Printer For Music Box, Chad Lewis, Caleb Murawski, Zion Smith, Bryan Tibbs

Williams Honors College, Honors Research Projects

The traditional method of creating music box sheet music involves manually punching holes into a paper strip using a hand-operated hole punch. This process involves precise knowledge of each note’s location and the ability to achieve perfect accuracy for hours.

The goal of this system is to automate this process, significantly reducing the time required while greatly improving the accuracy of the resulting music box playback. The user simply uploads a MIDI file of their choice into a user-friendly application. Here, the file is modified based on the user’s needs and sent to an automated hole-punching system to punch the …

Adaptive Lighting System, Jacob Samerdak, Ethan Schwartz, Brandon Breen, Matthew Carozza

Williams Honors College, Honors Research Projects

The Adaptive Lighting System is a modular network of components that requires minimal installation in homes. Additionally, all components of the system communicate wirelessly and interface with a mobile application. The system utilizes occupancy and daylight sensors to detect the environment of a room and adjust the lighting accordingly. The system detects ambient lighting as well as occupancy within a room. Using the data collected from the sensors, the system adjusts lighting temperature, color, and brightness. The user can also manually control these settings. The Adaptive Lighting System aims to help regulate circadian rhythm, so there is a configuration in …

Dashboard And Racing Telemetry, Cole Barach, Jacob Koshel, Ethan Zifzal, Matthew Sullivan

Williams Honors College, Honors Research Projects

The main goal of the project is to design and manufacture a combined dashboard and data logger for the vehicles produced by the Zips Racing design team. The dashboard will intuitively display real-time information to the driver and record all received information while driving. This information may be pulled off the device later for performing data analysis. This project will incorporate custom PCB design, surface mount soldering, embedded software development, and the CAN communication protocol.

Aquaflow Pro, Ashton Henley, Jeannie Fritz, Khalin Rubbo

Williams Honors College, Honors Research Projects

Changing aquarium water is a hassle, and when done incorrectly, it will result in changes in water quality and potential harm to aquatic life. Aquarium water changes are crucial in removing toxins such as ammonia, nitrites, and nitrates. There is a need for an automated, stressless fish tank water-changing solution that ensures aquatic safety. To this end, an automatic temperature-controlled fish tank water changing system was designed, carrying out a water change for a designated main tank in which water heated within an inbound reservoir is pumped into the tank to replace the outbound water, responding to both the tank’s …

C. Difficile Detection Method For First Responder Glove Application, Alli N. Senedak

Williams Honors College, Honors Research Projects

Clostridioides Difficile (C. diff) is a Anaerobic Gram-positive bacillus that is capable of spore formation, making it difficult to control its spread and duration in clinical environments. This phenomenon can provide danger to first responders, healthcare workers, and patients. The goal of this project is to create a biosensor capable of detecting C. diff in a clinical setting that can be applied to a glove apparatus. The project will involve the use of C. diff aptamers activated on the surface of an electrode. Once surface activation has been verified via surface analysis, the electrodes will be exposed to C. diff …

Design, Fabrication Modeling, And Optical Metrology Of Mwir Silicon Metalenses, Weiyu Chen

Graduate Studies Theses and Dissertations 2026

Mid-wave infrared (MWIR) optical systems require compact, broadband, manufacturable components whose performance can be predicted and measured reliably. Silicon metalenses are attractive because silicon combines high refractive index, MWIR transparency, and semiconductor-compatible fabrication. This dissertation develops a scale-bridging design–fabrication-modeling–metrology framework for MWIR silicon metalenses.

A shared full-aperture framework connects meta-atom libraries, physical layout generation, angular-spectrum propagation, point-spread-function calculation, and focal-plane energy metrics. Building on this foundation, the Dispersive Sweatt Model (DSM) incorporates meta-atom dispersion into conventional ray-tracing software, enabling broadband co-optimization of metasurfaces and refractive elements. A process-aware design framework then incorporates scanning electron microscopy (SEM)-measured height–radius relationships produced by …