Electrical and Computer Engineering Commons^™

Model-Less Fuzzy Logic Control For The Nasa Modeling And Control For Agile Aircraft Development Program, Keith A. Benjamin

Electrical & Computer Engineering Theses & Dissertations

The NASA Modeling and Control for Agile Aircraft Development (MCAAD) program seeks to develop new ways to control unknown aircraft to make the aircraft development cycle more efficient. More specifically, there is a desire to control an aircraft with an unknown mathematical model using only first principles of flight. In other words, rather than using a rigorously developed mathematical model combined with wind-tunnel tests, a controller is sought which would allow one to bypass the development of a rigorous mathematical model and enter wind-tunnel testing more directly. This paper presents the design of a fuzzy PID controller, governed by a …

Analysis Of Bulk Power System Resilience Using Vulnerability Graph, Md Ariful Haque

Computational Modeling & Simulation Engineering Theses & Dissertations

Critical infrastructure such as a Bulk Power System (BPS) should have some quantifiable measure of resiliency and definite rule-sets to achieve a certain resilience value. Industrial Control System (ICS) and Supervisory Control and Data Acquisition (SCADA) networks are integral parts of BPS. BPS or ICS are themselves not vulnerable because of their proprietary technology, but when the control network and the corporate network need to have communications for performance measurements and reporting, the ICS or BPS become vulnerable to cyber-attacks. Thus, a systematic way of quantifying resiliency and identifying crucial nodes in the network is critical for addressing the cyber …

Non-Destructive Evaluation For Composite Material, Desalegn Temesgen Delelegn

Electrical & Computer Engineering Theses & Dissertations

The Nondestructive Evaluation Sciences Branch (NESB) at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) has conducted impact damage experiments over the past few years with the goal of understanding structural defects in composite materials. The Data Science Team within the NASA LaRC Office of the Chief Information Officer (OCIO) has been working with the Non-Destructive Evaluation (NDE) subject matter experts (SMEs), Dr. Cheryl Rose, from the Structural Mechanics & Concepts Branch and Dr. William Winfree, from the Research Directorate, to develop computer vision solutions using digital image processing and machine learning techniques that can help identify …

Investigation Of The Skin Effect In Alternating Currents, Matthew Liang

The International Student Science Fair 2018

My research is on the investigation of the skin effect in alternating currents. The skin effect is when an alternating current tends to flow on the surface of the conductor, such that the current density is highest near the surface, and decreases with greater depths in the conductor. This is due to the alternating current inducing changing magnetic fields, which in turn induces currents that oppose the original flow of current, resisting the current flowing through the centre the most. This reduces the effective cross-sectional area of the conductor and increases the resistance, causing increased power losses. This effect becomes …

Energy Conversion System For Travelers (Ecost), Thipok Bovornratanaraks

The International Student Science Fair 2018

We have innovated “The Energy Conversion System for Travelers” or the ECoST. With the fact that most travelers have wheeled cabin-bags, whilst walking, the wheels will rotate so why don’t we harvest electricity from this kinetic energy? We thus install our innovation, the ECoST, to the bag to generate electricity from the spinning wheels. The electricity is then kept in the storage unit and ready to charge your empty battery devices in an emergency case via a USB port. To make life easy, our ECoST was designed to replicate the power bank charging method; therefore, we can charge …

Solar-Powered Bushfire Detection Mechanism, Aryaman Sud

The International Student Science Fair 2018

This project designed a prototype preventative measure for heat-induced disasters like bushfires and general home fires. The motivation for this project was the loss of life and property due to wildfire in rural Australia. The micro-controller will send an alert message and sound an alarm when the temperature value exceeds or equals the set temperature of . It is programmed using the programming language embedded ‘C’. Comprising of a solar panel, siren, temperature sensor and a Bluetooth module, this eco-friendly device can provide digitalised warnings to homes and farms where protection matters most.

Simplistic programming using the KEIL IDE software …

Solar-Powered Bushfire Detection Mechanism, Aryaman Sud

The International Student Science Fair 2018

This project designed a prototype preventative measure for heat-induced disasters like bushfires and general home fires. The motivation for this project was the loss of life and property due to wildfire in rural Australia. The micro-controller will send an alert message and sound an alarm when the temperature value exceeds or equals the set temperature of . It is programmed using the programming language embedded ‘C’. Comprising of a solar panel, siren, temperature sensor and a Bluetooth module, this eco-friendly device can provide digitalised warnings to homes and farms where protection matters most.

Simplistic programming using the KEIL IDE software …

The Relationship Between Electrical Conductivity And Magnetically Damped Motion, Kalem Akhtar

The International Student Science Fair 2018

Varying electrical conductivities of different, non-magnetic metals appears to affect the magnitude of magnetically damped motion. To determine the relationship between magnetic damping and conductivity an experiment was designed using different length tubes of aluminium, copper and brass. The tubes had the same diameter and similar wall thickness. A short, cylindrical neodymium magnet was dropped through the tubes of and the time for the magnet to traverse the tube was recorded using a smartphone camera. These times allowed for the terminal velocity to be calculated for each metal length and the average terminal velocity for each metal was determined. This …

Network Traffic Time Series Performance Analysisusing Statistical Methods, Purnawansyah Purnawansyah, Haviluddin Haviluddin, Rayner Alfred, Achmad Fanany Onnlita Gaffar

Knowledge Engineering and Data Science

This paper presents an approach for a network traffic characterization by using statistical techniques. These techniques are obtained using the decomposition, winter’s exponential smoothing and autoregressive integrated moving average (ARIMA). In this paper, decomposition and winter’s exponential smoothing techniques were used additive and multiplicative model. Then, ARIMA based-on Box-Jenkins methodology. The results of ARIMA (1,0,2) was shown the best model that can be used to the internet network traffic forecasting

Decision Support System Determination Of Main Work Unitin Wpp-711 Using Fuzzy Topsis, Hozairi Hozairi, Yaser Krisnafi

Knowledge Engineering and Data Science

Decision-making to determine the working units for being prioritized to be developed in order to improve fishery monitoring in WPP-711 is imperative. The Ministry of Maritime Affairs and Fisheries should make no mismatch decision-making through long-term calculation and analysis. The problem of determining the priority of working units is a complex problem, thus it is required to find an appropriate method to avoid a mismatch decision. Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) is a decision-making method capable of solving multi-criteria problems. TOPSIS working principle determines the alternative by considering the shortest distance from the positive …

Market Basket Analysis To Identify Customer Behaviorsby Way Of Transaction Data, Fachrul Kurniawan, Binti Umayah, Jihad Hammad, Supeno Mardi Susiki Nugroho, Mochammad Hariadi

Knowledge Engineering and Data Science

Transaction data is a set of recording data result in connections with sales-purchase activities at a particular company. In these recent years, transaction data have been prevalently used as research objects in means of discovering new information. One of the possible attempts is to design an application that can be used to analyze the existing transaction data. That application has the quality of market basket analysis. In addition, the application is designed to be desktop-based whose components are able to process as well as re-log the existing transaction data. The used method in designing this application is by way of …

Capital Letter Pattern Recognition In Text To Speechby Way Of Perceptron Algorithm, Novan Wijaya

Knowledge Engineering and Data Science

Computer vision is a data transformation retrieved or generated from webcam into another form in means of determining decision. All kinds of transformations are carried through to attain specific aims. One of the supporting techniques in implementing computer vision on a system is digital image processing as the objective of digital image processing is to transform digital-formatted picture so that it can be processed in computer. Computer vision and digital image processing can be implemented in a system of capital letter introduction and real-time handwriting reading on a whiteboard supported by artificial neural network mode “perceptron algorithm” used as a …

Sql Logic Error Detection Using Start End Mid Algorithm, Jevri Tri Ardiansyah, Aji Prasetya Wibawa, Triyanna Widiyaningtyas, Okazaki Yasuhisa

Knowledge Engineering and Data Science

Database is an important part of a system and it stores data to be manipulated. SQL (Structured Query Language) is used for manipulating those data to extract information and make decision. There are two types of error which make SQL is challenging to learn, namely syntax error and logic error. Compiler can detect syntax error, but it does not show error warning while logical error occurred. It makes logic error more difficult to understand than syntax error. A web based SQL compiler with errors detection ability by using Start End Mid algorithm is then developed, To help database's user to …

Modelling Transport Of Nitrogen Compounds In Geita Wetland Along Mtakuja River, Ezrael Masawe

Tanzania Journal of Engineering and Technology (TJET)

The impacts of excessive nitrogen loading to streams in a watershed occur in the receiving waters such as rivers at the outlet of the watershed. To quantify the impacts of land use and management practices on the nitrogen loading at the watershed outlet, simulation models are needed that can both predict the nitrogen loading at the edge of individual fields and predict the fate of nitrogen as it moves through the river network to the watershed outlet. This paper presents the results of a model analysis for describing the processes governing transformations and transport of nitrogen compounds (NO3-N and NH4-N) …

Low Voltage Ride Through Enhancement For Wind Turbines Equipped With Dfig Under Symmetrical Grid Faults, Francis Mwasilu

Tanzania Journal of Engineering and Technology (TJET)

In modern power systems with significant penetration of wind-turbines (WTs), improvement of low voltage ride through (LVRT) capability of WTs equipped with doubly-fed induction generators (DFIGs) is an important issue. Thus, this paper proposes a low voltage ride through (LVRT) strategy, which comprise of a capacitor connected in series with an inductor both connected in parallel to a resistor. The configuration is then connected to a small series resistor via a pair of antiparallel-Thyristors. The circuit and its switching control scheme of the proposed LVRT circuit are designed to: minimize the transition times, maintain the RSC connection to the rotor-windings, …

The Fate Of Nitrogen And Faecal Coliform In The Lubigi Wetland In Uganda, Aloyce Mayo

Tanzania Journal of Engineering and Technology (TJET)

The capacity of the Lubigi wetland to reduce nitrogen and faecal coliform pollution entering Lake Kyoga in Uganda was investigated. Three transects with 5 sampling points in each, were established in the wetland. Wetland plants samples were collected from the specific locations along the transects, and laboratory tests and analyses were carried out for plants biomass and nitrogen contents determination. Samples of wetland sediments were also collected, and laboratory tests and analyses were done for determination of nitrogen content in the sediments. Wetland water samples were taken from the main wetland inlet and the main outlet from the wetland main …

Multiple-Change-Point Modeling And Exact Bayesian Inference Of Degradation Signal For Prognostic Improvement, Yuxin Wen, Jianguo Wu, Qiang Matthew Zhou, Tzu-Liang Bill Tseng

Engineering Faculty Articles and Research

Prognostics play an increasingly important role in modern engineering systems for smart maintenance decision-making. In parametric regression-based approaches, the parametric models are often too rigid to model degradation signals in many applications. In this paper, we propose a Bayesian multiple-change-point (CP) modeling framework to better capture the degradation path and improve the prognostics. At the offline modeling stage, a novel stochastic process is proposed to model the joint prior of CPs and positions. All hyperparameters are estimated through an empirical two-stage process. At the online monitoring and remaining useful life (RUL) prediction stage, a recursive updating algorithm is developed to …

Additively Manufactured On-Package Multipolar Antenna Systems For Harsh Communication Channels, Ramiro A. Ramirez-Hernandez

USF Tampa Graduate Theses and Dissertations

Four main aspects are studied and explored throughout this dissertation: (1) On-Package Multipolar antenna system design for integration with commercial wireless sensor nodes for machine-to-machine communication applications; (2) Development of a novel MMIC packaging process and subsequent antenna integration for chip-to-chip communication applications, (3) Design and characterization of additively manufactured lumped passive elements for integration with MMIC and hybrid circuits, (4) Design and characterization of antennas for on- and off-metal radio frequency identification (RFID) applications.

This work presents the design of different 3-D printed tripolar antenna systems operating at 2.4 GHz. The antennas are designed for integration with commercial wireless …

Quantitative Measurement Of Cerebral Hemodynamics During Activation Of Auditory Cortex With Single- And Multi-Distance Near Infrared Spectroscopy, Penaz Parveen Sultana Mohammad

USF Tampa Graduate Theses and Dissertations

Functional Near Infrared Spectroscopy (fNIRS) is a safe, low-cost, non-invasive opti-cal technique to monitor focal changes in brain activity using neurovascular coupling and measurements of local tissue oxygenation, i.e., changes in concentrations of oxygenated hemoglobin (HbO) and deoxygenated hemoglobin (HbR)[42]. This thesis utilizes two fNIRS approaches to measure hemodynamic changes associated with functional stimulation of the human auditory cortex. The first approach, single-distance continuous wave NIRS (CW-NIRS) utilizes relatively simple instrumentation and the Modified-Beer Lambert (MBL) law to estimate activation induced changes in tissue oxygenation (∆CHbO and ∆CHbR)[17]. The second more complex approach, frequency domain NIRS (FD-NIRS), employs a photon …

Co3(Hcoo)6@Rgo As A Promising Anode For Lithium Ion Batteries, Heng Jiang, Jing-Min Fan, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

Metal–organic framework(MOF) is a kind of novel electrode materials for lithium ion batteries. Here, a composite material Co₃(HCOO)₆@rGO was synthesized for the first time by in situ loading of Co₃(HCOO)₆ on rGO (reduced oxide graphene) through a solution chemistry method. As an anode material for lithium ion batteries, it exhibited an excellent cycle stability as well as a large reversible capacity of 926 mAh·g^-1 at a current density of 500 mA·g^-1 after 100 cycles within the voltage range of 0.02 ~ 3.0 V vs. Li/Li⁺ with a good rate capability. …

Chemical Stability Investigations Of Catalyst Layer In Pemfc, Yan-Yan Gao, Ming Hou, Yong-Yi Jiang, Dong Liang, Jun Ai, Li-Min Zheng

Journal of Electrochemistry

This work was intended to study the effect of free radicals on the chemical stability of catalyst layer via ex situ accelerated stress test (AST). Fenton reagent was used as the free radical provider in this research. Apart from the decomposition of Nafion in catalyst layer, the agglomerated Pt nanoparticles and the corroded carbon support were also observed after being treated in Fenton reagent for 100 h. Firstly, the existence of fluoride (F) ions evidenced the chemical decomposation of Nafion after being attacked by trace radical species, which was supported by the intensity decrease in the C-F stretching and vibration …

Recent Progress For Fe-N-C Electrocatalysts In Alkaline Fuel Cells, Xin Deng, Heng-Quan Chen, Ye Hu, Qing-Gang He

Journal of Electrochemistry

Fuel cells are highly recommended nowadays due to their intrinsic advantages such as high energy conversion efficiency, nearly no pollution, and convenient operation. With the development of anion exchange membrane, alkaline fuel cells have gone through a renaissance thanks to their superiorities such as faster reaction kinetics, wider choices for both fuels and electrocatalysts. It is essential to find an appropriate electrocatalyst for oxygen reduction reaction (ORR) to improve the performance of alkaline fuel cells. Further commercialization of the widely used Pt-based materials has suffered from disadvantages such as scarcity and high cost. As alternatives to largely investigated Pt-based materials, …

A Study Of Pulse Electrodeposition On Suppressing The Formation Of Lithium Dendrite, Wen-Jun Guo, Zi-Qiong Li, Ruo-Hao Ke, Dong-Fang Niu, Heng Xu, Xin-Sheng Zhang

Journal of Electrochemistry

A pulse charge method was used to suppress the formation of lithium dendrite on the copper electrode in 0.5 mol·L^-1 LiBr/propylene carbonate (PC) electrolyte. The surface variation of lithium deposition was investigated by scanning electron microscope and impedance measurement. The SEM test showed that the lithium dendrites were formed on the copper electrode during the traditional process of electrodeposition. However, the formed dendrite was suppressed by pulse charge method. The results of the impedance measurement confirmed that the pulse electrodeposition could suppress the dendrite under the optimized duty ratio (0.5). The long single pulse deposition time decreased the resistance …

Pt/G-C3N4 Nanosheet For Visible Light-Induced Enhancement Of The Activity For Formic Acid Electro-Oxidation, Yong-Rong Sun, Chun-Yu Du, Guo-Kang Han, Ya-Jing Wang, Yun-Zhi Gao, Ge-Ping Yin

Journal of Electrochemistry

By using graphitic carbon nitride nanosheet (g-C₃N₄ nanosheet) as a support,Pt/g-C₃N₄ nanosheet catalyst was fabricated by microwave assisted polylol process. The nanoparticles size,composition,structure and optical properties of Pt/g-C₃N₄ nanosheet were characterized by TEM,XRD,XPS and UV-Vis diffuse reflectance spectroscopy. Comparing with the catalytic activities toward formic acid electro-oxidation under dark and visible light illumination,the superior activity of Pt/g-C₃N₄ nanosheet catalyst was achieved under visible light illumination. This visible light-driven enhancement in the formic acid performance could be attributed to the plasmon-induced electron-hole separation on g-C₃N₄ with …

Preparations And Electrochemical Performances Of Carbon Coated Silicon/Graphite Composites, Tian-Yi Gao, Zheng-Liang Gong

Journal of Electrochemistry

In this work, the carbon coated silicon (Si@C) composite materials were synthesized based on the industrial silicon powder (600 meshes) via a high energy ball milling combing with in-situ carbon coating (carbonization) method. The Si@C/graphite (Si/C) composite anode materials were prepared by a simple mechanical ball-milling approach. The effects of carbon coating and the ratio of Si to graphite on electrochemical performances of Si/graphite composite materials were investigated systematically. Compared with the nano-Si/graphite composites, the Si/C composites showed higher reversible capacity, better rate capability and cycle performance. The Si@C materials composited of amorphous carbon and crystal silicon with the primary …

Carbon Composite Fe3O4 Nanoparticles Based Electrochemical Sensor For Hydrogen Peroxide Detection, Si-Yu Zhang, Hui-Juan Wang, Shu-Fang Li, Jian-Ying Qu

Journal of Electrochemistry

In this work, a novel hydrogen peroxide electrochemical sensor was constructed with ferroferric oxide (Fe₃O₄) magnetic nanoparticles, which demonstrated good electrocatalytic activity for hydrogen peroxide. There existed a good linear relationship between the concentration of hydrogen peroxide and the oxidation peak current in the range of 1.00 × 10^-6 ~ 1.00 × 10^-3 mol·L^-1 (R = 0.9980) with the detection limit of 6.60 × 10-7 mol·L^-1. The sensor exhibited good anti-interference ability, high reproducibility and stability.

Lead Modified Nanoporous Platinum Electro-Catalysts For Formic Acid Oxidation, Yuan-Yuan Zhang, Qing-Feng Yi, Ge-Kun-Kun Zuo, Tao Zou, Xiao-Ping Liu, Xiu-Lin Zhou

Journal of Electrochemistry

Platinum (Pt) catalysts modified by other suitable metals significantly enhance their electrochemical activities for formic acid oxidation. In this work, a titanium-supported nanoporous network platinum (nanoPt/Ti) electrode was prepared using a hydrothermal method. The as-prepared nanoPt/Ti electrode was modified with a certain amount of lead by using cyclic voltammetry for different scan cycle numbers (n), namely, n = 10, 15, 20 and 30, to synthesize the novel lead-modified nanoporous Pt (nanoPb_(n)-Pt/Ti) electrodes. Electro-oxidation of formic acid on these electrodes was studied with cyclic voltammetry (CV), chronoamperometry and chronopotentiometry in sulfuric acid solution. CV curves showed that both nanoPt/Ti …

Imaging The Three-Dimensional Orientation And Rotational Mobility Of Fluorescent Emitters Using The Tri-Spot Point Spread Function, Oumeng Zhang, Jin Lu, Tianben Ding, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Fluorescence photons emitted by single molecules contain rich information regarding their rotational motions, but adapting single-molecule localization microscopy (SMLM) to measure their orientations and rotational mobilities with high precision remains a challenge. Inspired by dipole radiation patterns, we design and implement a Tri-spot point spread function (PSF) that simultaneously measures the three-dimensional orientation and the rotational mobility of dipole-like emitters across a large field of view. We show that the orientation measurements done using the Tri-spot PSF are sufficiently accurate to correct the anisotropy-based localization bias, from 30 nm to 7 nm, in SMLM. We further characterize the emission anisotropy …

Alumni Grassroots Leadership Enables Sponsored Course Development, Vladimir I. Prodanov, John Greene

Electrical Engineering

This paper presents a lab-centric course development where alumni, employed by an IAB member company, play a pivotal role. Recently the lead author of this paper qualified for a sabbatical leave and the college enthusiastically approved the proposal (a 400-level elective in networked sensors). He considered two class structures: lecture-only and lecture-lab. While lecture-lab is the desired mode of instruction, the development of such a course would take at least 2 quarters. Since extended sabbaticals are only partly funded by the university the creation of a lecture-lab course hinged on the availability of a sponsor. Simultaneously an alumnus, now with …

Flipping A Hardware Design Class: An Encouragement Of Active Learning. Should It Continue?, Nader Rafla, H. Shelton Jacinto

Electrical and Computer Engineering Faculty Publications and Presentations

In this paper we aim to present the lessons learned from flipping the classroom of an entry-level graduate course on digital hardware design. This digital hardware design course uses hardware description languages (HDLs) for programming and requires students to learn relevant concepts and methodologies to successfully design, simulate, synthesize, and verify digital circuits created using hands-on projects and in-class activities. In addition, students in the digital hardware design class get exposure and gain familiarity with an industrial design suite to enhance their knowledge of real-life design cycles.

Typically, students struggle with provided in-class activities, assignments, and projects in any digital …