Electrical and Computer Engineering Commons^™

A Fast Algorithm For The Inversion Of Quasiseparable Vandermonde-Like Matrices, Sirani M. Perera, Grigory Bonik, Vadim Olshevsky

Publications

The results on Vandermonde-like matrices were introduced as a generalization of polynomial Vandermonde matrices, and the displacement structure of these matrices was used to derive an inversion formula. In this paper we first present a fast Gaussian elimination algorithm for the polynomial Vandermonde-like matrices. Later we use the said algorithm to derive fast inversion algorithms for quasiseparable, semiseparable and well-free Vandermonde-like matrices having O(n2) complexity. To do so we identify structures of displacement operators in terms of generators and the recurrence relations(2-term and 3-term) between the columns of the basis transformation matrices for quasiseparable, semiseparable and well-free polynomials. Finally we …

Digital Display With Integrated Computing Circuit, Ronald S. Cok, John W. Harmer, Michael E. Miller

AFIT Patents

A digital display device includes a display substrate; an array of pixels formed on the display substrate; an array of driving circuits located on the display substrate, each driving circuit electrically connected to one or more pixels for controlling a pixel current provided to each pixel; an array of computing circuits located on the display substrate, each computing circuit including circuits for signal or image processing and for communicating with neighboring computing circuits; a plurality of electrical conductors formed on the display substrate and connected to each of the driving circuits and digital computing circuits, wherein each computing circuit is …

Impact Of Plug-In Electric Vehicles And Wind Generators On Harmonic Distortion Of Electric Distribution Systems, Ritam Misra

Dissertations, Master's Theses and Master's Reports - Open

Harmonic distortion on voltages and currents increases with the increased penetration of Plug-in Electric Vehicle (PEV) loads in distribution systems. Wind Generators (WGs), which are source of harmonic currents, have some common harmonic profiles with PEVs. Thus, WGs can be utilized in careful ways to subside the effect of PEVs on harmonic distortion. This work studies the impact of PEVs on harmonic distortions and integration of WGs to reduce it. A decoupled harmonic three-phase unbalanced distribution system model is developed in OpenDSS, where PEVs and WGs are represented by harmonic current loads and sources respectively. The developed model is first …

Svpwm Switching Pattern For Z-Source Inverter, Simulation And Application, Zhe Huang

Dissertations, Master's Theses and Master's Reports - Open

The voltage source inverter (VSI) and current voltage source inverter (CSI) are widely used in industrial application. But the traditional VSIs and CSIs have one common problem: can’t boost or buck the voltage come from battery, which make them impossible to be used alone in Hybrid Electric Vehicle (HEV/EV) motor drive application, other issue is the traditional inverter need to add the dead-band time into the control sequence, but it will cause the output waveform distortion.

This report presents an impedance source (Z-source network) topology to overcome these problems, it can use one stage instead of two stages (VSI or …

Household Solar Power System, He Jiang

Dissertations, Master's Theses and Master's Reports - Open

Photovoltaic power has become one of the most popular research area in new energy field. In this report, the case of household solar power system is presented. Based on the Matlab environment, the simulation is built by using Simulink and SimPowerSystem. There are four parts in a household solar system, solar cell, MPPT system, battery and power consumer. Solar cell and MPPT system are been studied and analyzed individually. The system with MPPT generates 30% more energy than the system without MPPT. After simulating the household system, it is can be seen that the power which generated by the system …

Development Of An Ionic Liquid Ferrofluid Electrospray Source And Mode Shape Studies Of A Ferrofluid In A Non-Uniform Magnetic Field, Edmond Joseph Meyer Iv

Dissertations, Master's Theses and Master's Reports - Open

An electrospray source has been developed using a novel new fluid that is both magnetic and conductive. Unlike conventional electrospray sources that required microfabricated structures to support the fluid to be electrosprayed, this new electrospray fluid utilizes the Rosensweig instability to create the structures in the magnetic fluid when an external magnetic field was applied. Application of an external electric field caused these magnetic fluid structures to spray. These fluid based structures were found to spray at a lower onset voltage than was predicted for electrospray sources with solid structures of similar geometry. These fluid based structures were also found …

Multi-Wavelength Speckle Reduction For Laser Pico-Projectors Using Diffractive Optics, Weston H. Thomas

Dissertations, Master's Theses and Master's Reports - Open

Personal electronic devices, such as cell phones and tablets, continue to decrease in size while the number of features and add-ons keep increasing. One particular feature of great interest is an integrated projector system. Laser pico-projectors have been considered, but the technology has not been developed enough to warrant integration. With new advancements in diode technology and MEMS devices, laser-based projection is currently being advanced for pico-projectors. A primary problem encountered when using a pico-projector is coherent interference known as speckle. Laser speckle can lead to eye irritation and headaches after prolonged viewing. Diffractive optical elements known as diffusers have …

Hvac System Analysis And Energy Audit: The Providence Athenaeum, Nicholas Farland, Trevor Larson, Justin Taylor, Cameron Wendler, Anthony Ruocco, Janet Baldwin, Arnold Robinson

Engineering and Construction Management

To evaluate the impact of potential modifications to the HVAC system the Historical Value Adding Consultants developed a building energy model. The building energy model was constructed using a Microsoft Excel spreadsheet that utilizes typical meteorological year (TMY) data to determine the average energy usage of the Athenaeum for a typical year. The model has been validated against actual energy usage and is used to identify and quantify energy savings resulting from design alternatives.

Biogeography-Based Optimization For Combinatorial Problems And Complex Systems, Dawei Du

ETD Archive

Biogeography-based optimization (BBO) is a heuristic evolutionary algorithm that has shown good performance on many problems. In this dissertation, three problem1s 1 are researched for BBO: convergence speed and optimal solution convergence of BBO,1 1BBO application to combinatorial problems, and BBO application to complex systems. The first problem is to analyze BBO from two perspectives: how the components of BBO affect its convergence speed and the reason that BBO converges to the optimal solution. For the first perspective, which is convergence speed, we analyze the two essential components of BBO -- population construction and information sharing. For the second perspective, …

A Photonic Crystal Fiber Based Polarimetric Sensor For Cure Monitoring Of Magneto-Rheological Smart Composite Material, Manjusha Ramakrishnan, Ginu Rajan, Yuliya Semenova, Y. Zhou, Stephen Jerrams, Gerald Farrell

Articles

A buffer stripped high birefringent photonic crystal fibre based polarimetric sensor is developed for monitoring the curing process of magnetorheological elastomer (MRE) smart composite material. Using the developed sensor, different phases of the MRE curing process are clearly visible from the phase shift variation of the embedded polarisation maintaining photonic crystal fibre (PM-PCF) sensor. During the curing process, the buffer stripped PM-PCF exhibits a stress/strain induced phase shift variation from 0 to 1.98 rad. This is a significantly large phase change, which can be used to very clearly identify the different stages in the curing process. For comparison, a fibre …

Energy-Efficient Magnetoelastic Non-Volatile Memory, Ayan K. Biswas, Supriyo Bandyopadhyay, Jayasimha Atulasimha

Electrical and Computer Engineering Publications

We propose an improved scheme for low-power writing of binary bits in non-volatile (multiferroic) magnetic memory with electrically generated mechanical stress. Compared to an earlier idea [N. Tiercelin et al., J. Appl. Phys. 109, 07D726 (2011)], our scheme improves distinguishability between the stored bits when the latter are read with magneto-tunneling junctions. More importantly, the write energy dissipation and write error rate are reduced significantly if the writing speed is kept the same. Such a scheme could be one of the most energy-efficient approaches to writing bits in magnetic non-volatile memory. (C) 2014 AIP Publishing LLC.

Critical Analysis And Remedy Of Switching Failures In Straintronic Logic Using Bennett Clocking In The Presence Of Thermal Fluctuations, Kuntal Roy

Electrical and Computer Engineering Publications

Straintronic logic is a promising platform for beyond Moore's law computing. Using Bennett clocking mechanism, information can propagate through an array of strain-mediated multiferroic nanomagnets, exploiting the dipolar coupling between the magnets without having to physically interconnect them. Here, we perform a critical analysis of switching failures, i.e., error in information propagation due to thermal fluctuations through a chain of such straintronic devices. We solved stochastic Landau-Lifshitz-Gilbert equation considering room-temperature thermal perturbations and show that magnetization switching may fail due to inherent magnetization dynamics accompanied by thermally broadened switching delay distribution. Avenues available to circumvent such issue are proposed. (C) …

Nanowire-Based Frequency-Selective Capacitive Photodetector For Resonant Detection Of Infrared Radiation At Room Temperature, Saumil Bandyopadhyay

Electrical and Computer Engineering Publications

Characteristics of a capacitive infrared photodetector that works at room temperature by registering a change in capacitance upon illumination are reported. If used in an ideal resonant inductor-resistor-capacitor circuit, it can exhibit zero dark current, zero standby power dissipation, infinite detectivity, and infinite light-to-dark contrast ratio. It is also made frequency-selective by employing semiconductor nanowires that selectively absorb photons of energies close to the nanowire's bandgap. Based on measured parameters, the normalized detectivity is estimated to be ∼3 × 10⁷ Jones for 1.6 μm IR wavelength at room temperature.

Excitonic Recombination Dynamics In Non-Polar Gan/Algan Quantum Wells, D. Rosales, B. Gil, T. Bretagnon, B. Guizal, F. Zhang, S. Okur, M. Monavarian, N. Izyumskaya, V. Avrutin, Ü Özgür, H. Morkoç, J. H. Leach

Electrical and Computer Engineering Publications

The optical properties of GaN/Al0.15Ga0.85N multiple quantum wells are examined in 8 K–300 K temperature range. Both polarized CW and time resolved temperature-dependent photoluminescence experiment are performed so that we can deduce the relative contributions of the non-radiative and radiative recombination processes. From the calculation of the proportion of the excitonic population having wave vector in the light cone, we can deduce the variation of the radiative decay time with temperature. We find part of the excitonic population to be localized in concert with the report of Corfdir et al. (Jpn. J. Appl. Phys., Part 2 52, 08JC01 (2013)) in …

Properties Of The Main Mg-Related Acceptors In Gan From Optical And Structural Studies, B. Monemar, P. P. Paskov, G. Pozina, C. Hemmingsson, J. P. Bergman, S. Khromov, V. N. Izyumskaya, V. Avrutin, X. Li, H. Morkoç, H. Amano, M. Iwaya, I. Akasaki

Electrical and Computer Engineering Publications

The luminescent properties of Mg-doped GaN have recently received particular attention, e.g., in the light of new theoretical calculations, where the deep 2.9 eV luminescence band was suggested to be the main optical signature of the substitutional Mg Ga acceptor, thus, having a rather large binding energy and a strong phonon coupling in optical transitions. We present new experimental data on homoepitaxial Mg-doped layers, which together with the previous collection of data give an improved experimental picture of the various luminescence features in Mg-doped GaN. In n-type GaN with moderate Mg doping (<10¹⁸ cm⁻³), the 3.466 eV …

Spectroscopy Studies Of Straincompensated Mid-Infrared Qcl Active Regions On Misoriented Substrates, Gregory Edward Triplett, Justin Grayer, Charles Meyer, Emily Cheng, Denzil Roberts

Electrical and Computer Engineering Publications

In this work, we perform spectroscopic studies of AlGaAs/InGaAs quantum cascade laser structures that demonstrate frequency mixing using strain-compensated active regions. Using a three-quantum well design based on diagonal transitions, we incorporate strain in the active region using single and double well configurations on various surface planes (100) and (111). We observe the influence of piezoelectric properties in molecular beam epitaxy grown structures, where the addition of indium in the GaAs matrix increases the band bending in between injector regions and demonstrates a strong dependence on process conditions that include sample preparation, deposition rates, mole fraction, and enhanced surface diffusion …

Orientation-Dependent Pseudomorphic Growth Of Inas For Use In Lattice-Mismatched Mid-Infrared Photonic Structures, Gregory Edward Triplett, Charles Meyer, Emily Cheng

Electrical and Computer Engineering Publications

In this study, InAs was deposited on GaAs (100) and GaAs (111)B 2 degrees towardssubstrates for the purpose of differentiating the InAs growth mode stemming from strain and then analyzed using in-situ reflection high energy electron diffraction, scanning electron microscopy, Raman spectroscopy, reflectance spectroscopy, and atomic force microscopy. The procession of InAs deposition throughout a range of deposition conditions results in assorted forms of strain relief revealing that, despite lattice mismatch for InAs on GaAs (approximately 7%), InAs does not necessarily result in typical quantum dot/wire formation on (111) surfaces, but instead proceeds two-dimensionally due primarily to the surface orientation.

Analytical Parametric Model Used To Study The Influence Of Electrostatic Force On Surface Coverage During Electrospinning Of Polymer Fibers, Joshua Beisel, Jerry Kyeremateng, Lance Purkett, Jessica Andriolo, Jack L. Skinner

Electrical Engineering

Electrospinning (ES) can readily produce polymer fibers with cross-sectional dimensions ranging from tens of nanometers to tens of microns. Qualitative estimates of surface area coverage are rather intuitive. However, quantitative analytical and numerical methods for predicting surface coverage during ES have not been covered in sufficient depth to be applied in the design of novel materials, surfaces, and devices from ES fibers. This article presents a modeling approach to ES surface coverage where an analytical model is derived for use in quantitative prediction of surface coverage of ES fibers. The analytical model is used to predict the diameter of circular …

Null Convention Logic Asynchronous Register Full Path Completion Feedback Loop Using Two Stage Voltage Divider, Christopher P. Taylor

Browse all Theses and Dissertations

As fabrication technologies improve logic densities increase. It becomes harder to mitigate clock skew and jitter. Higher clock rates combined with increased numbers of sinks increase mixed-system substrate noise. An increasingly popular approach to address these problems is clockless logic. One technique is Null Convention Logic (NCL). However, traditional NCL feedback loops have large area overhead and require many gate delays. This makes NCL impractical in many applications. In this paper we propose to replace the feedback logic with a two-stage voltage divider. Using our technique we show up to 50% area reduction and require only one unit gate delay.

Its All In The Mind: Mind Controlled Prosthetics, Tziril Joselit

The Science Journal of the Lander College of Arts and Sciences

The problem with prosthetics is a longstanding problem that researchers have been working on for many years. They are attempting to create a prosthetic that acts as if it is the original limb or body part. In recent years they have discovered a technology that has assisted many of those who are greatly in need of a prosthetic, such as an amputee or someone who is “locked in”. “Locked in” refers to a person who is technically confined in his own body and has no methods of communication with the world. Brain-computer interface (BCI) has opened up a whole new …

Short-Term Load Forecasting Using Neural Network For Future Smart Grid Application, Jixuan Zheng

Electronic Theses and Dissertations

Short-term load forecasting of power system has been a classic problem for a long time. Not merely it has been researched extensively and intensively, but also a variety of forecasting methods has been raised.

This thesis outlines some aspects and functions of smart meter. It also presents different policies and current statuses as well as future projects and objectives of SG development in several countries.

Then the thesis compares main aspects about latest products of smart meter from different companies.

Lastly, three types of prediction models are established in MATLAB to emulate the functions of smart grid in the short-term …

Wireless Sensor Localization: Error Modeling And Analysis For Evaluation And Precision, Omar Ali Zargelin

Electronic Theses and Dissertations

Wireless sensor networks (WSNs) have shown promise in a broad range of applications. One of the primary challenges in leveraging WSNs lies in gathering accurate position information for the deployed sensors while minimizing power cost. In this research, detailed background research is discussed regarding existing methods and assumptions of modeling methods and processes for estimating sensor positions. Several novel localization methods are developed by applying rigorous mathematical and statistical principles, which exploit constraining properties of the physical problem in order to produce improved location estimates. These methods are suitable for one-, two-, and three-dimensional position estimation in ascending order of …

Dc Microgrid Stabilization Through Fuzzy Control Of Interleaved, Heterogeneous Storage Elements, Robert David Smith

Dissertations, Master's Theses and Master's Reports - Open

As microgrid power systems gain prevalence and renewable energy comprises greater and greater portions of distributed generation, energy storage becomes important to offset the higher variance of renewable energy sources and maximize their usefulness. One of the emerging techniques is to utilize a combination of lead-acid batteries and ultracapacitors to provide both short and long-term stabilization to microgrid systems.

The different energy and power characteristics of batteries and ultracapacitors imply that they ought to be utilized in different ways. Traditional linear controls can use these energy storage systems to stabilize a power grid, but cannot effect more complex interactions. This …

Exploring High Throughput Computing Paradigm For Global Routing, Yiding Han, Dean Michael Ancajas, Koushik Chakraborty, Sanghamitra Roy

Electrical and Computer Engineering Faculty Publications

With aggressive technology scaling, the complexity of the global routing problem is poised to grow rapidly. Solving such a large computational problem demands a high-throughput hardware platform such as modern graphics processing units (GPUs). In this paper, we explore a hybrid GPU-CPU high-throughput computing environment as a scalable alternative to the traditional CPU-based router. We introduce net-level concurrency (NLC), which is a novel parallel model for router algorithms and aims to exploit concurrency at the level of individual nets. To efficiently uncover NLC, we design a scheduler to create groups of nets that can be routed in parallel. At its …

Automated Evaluation Of Approximate Matching Algorithms On Real Data, Frank Breitinger, Vassil Roussev

Electrical & Computer Engineering and Computer Science Faculty Publications

Bytewise approximate matching is a relatively new area within digital forensics, but its importance is growing quickly as practitioners are looking for fast methods to screen and analyze the increasing amounts of data in forensic investigations. The essential idea is to complement the use of cryptographic hash functions to detect data objects with bytewise identical representation with the capability to find objects with bytewise similarrepresentations.

Unlike cryptographic hash functions, which have been studied and tested for a long time, approximate matching ones are still in their early development stages and evaluation methodology is still evolving. Broadly, prior approaches have …

Design And Evaluation Of A Propulsion System For Small, Compact, Low-Speed Maneuvering Underwater Vehicles, Florence M. Mbithi

Electronic Theses and Dissertations

Underwater vehicles used to perform precision inspection and non-destructive evaluation in tightly constrained or delicate underwater environments must be small, have low-speed maneuverability and a smooth streamlined outer shape with no appendages. In this thesis, the design and analysis of a new propulsion system for such underwater vehicles is presented. It consists primarily of a syringe and a plunger driven by a linear actuator and uses different inflow and outflow nozzles to provide continuous propulsive force. A prototype of the proposed propulsion mechanism is built and tested. The practical utility and potential efficacy of the system is demonstrated and assessed …

Building Temperature Control With Intelligent Methods, Feng Zhang

Electronic Theses and Dissertations

Temperature control is important for both human comfort and the need in industry. In the thesis, two good intelligent control methods are compared to find their advantages and disadvantages. Matlab is used as the tool to make models and process calculations. The building model is one simple room in Akwesasne in New York State and the target is to keep the temperature indoor around 22 degree Centigrade from 12/29/2013 to 12/31/2013. Heat pump is used to provide or absorb heat. All data in the experiments is from JRibal Environmental eXchange network and PJM. The first method is fuzzy neural network …

Fabrication And Application Of A Polymer Neuromorphic Circuitry Based On Polymer Memristive Devices And Polymer Transistors, Robert A. Nawrocki

Electronic Theses and Dissertations

Neuromorphic engineering is a discipline that aims to address the shortcomings of today's serial computers, namely large power consumption, susceptibility to physical damage, as well as the need for explicit programming, by applying biologically-inspired principles to develop neural systems with applications such as machine learning and perception, autonomous robotics and generic artificial intelligence.

This doctoral dissertation presents work performed fabricating a previously developed type of polymer neuromorphic architecture, termed Polymer Neuromorphic Circuitry (PNC), inspired by the McCulloch-Pitts model of an artificial neuron. The major contribution of this dissertation is a development of processing techniques necessary to realize the Polymer Neuromorphic …

Electrical And Computer Engineering Department 2013-2014 Newsletter, College Of Engineering And Applied Sciences

Electrical and Computer Engineering Newsletter

• A Word from the Department Chair
• New Faculty
• Exploring the Intersection of Biology and ECE
• Laboratory Upgrades
• New Initiatives
• Student Highlight
• Students Create New Startup
• Senior Design Highlights
• Student Organizations
• Student Highlight
• Chaotic Circuits
• Recent Publications and Grants

Noisy Gradient Descent Bit-Flip Decoding For Ldpc Codes, G. Sundararajan, Chris J. Winstead, E. Boutillon

Electrical and Computer Engineering Faculty Publications

A modified Gradient Descent Bit Flipping (GDBF) algorithm is proposed for decoding Low Density Parity Check (LDPC) codes on the binary-input additive white Gaussian noise channel. The new algorithm, called Noisy GDBF (NGDBF), introduces a random perturbation into each symbol metric at each iteration. The noise perturbation allows the algorithm to escape from undesirable local maxima, resulting in improved performance. A combination of heuristic improvements to the algorithm are proposed and evaluated. When the proposed heuristics are applied, NGDBF performs better than any previously reported GDBF variant, and comes within 0.5 dB of the belief propagation algorithm for several tested …