Electrical and Computer Engineering Commons^™

Cyber-Physical Security Strategies, Sarah Davis

LSU Master's Theses

Cyber-physical security describes the protection of systems with close relationships between computational functions and physical ones and addresses the issue of vulnerability to attack through both cyber and physical avenues. This describes systems in a wide variety of functions, many crucial to the function of modern society, making their security of paramount importance. The development of secure system design and attack detection strategies for each potential avenue of attack is needed to combat malicious attacks. This thesis will provide an overview of the approaches to securing different aspect of cyber-physical systems. The cyber element can be designed to better prevent …

Characterization Of Hybrid Electronic Materials Using Atomic Force Microscopy, Madhavi Divakar Rajathadripura

LSU Master's Theses

Miniaturization in the electronics industry has been driven by advancements in material science. Recently, Hybrid Electronic Materials (HEMs) have been postulated to have unique material properties that can be used within the semiconductor industry. As such, the main focus of this research is to characterize the relevant properties of HEMs using atomic force microscopy (AFM), conductive probe atomic force microscopy (CP-AFM), and Raman spectroscopy techniques. Emphasis is placed on characterizing [R6G][TPB] GUMBOS which are a Group of Uniform Materials Based on Organic Salts. GUMBOS exhibit properties such as fluorescence and magnetic susceptibility, both of which may be important with respect …

Transient Stability Enhancement Of Wind Farms Using Power Electronics And Facts Controllers, Hossein A. Mohammadpour

Theses and Dissertations

Nowadays, it is well-understood that the burning of fossil fuels in electric power station has a significant influence on the global climate due to greenhouse gases. In many countries, the use of cost-effective and reliable low-carbon electricity energy sources is becoming an important energy policy. Among different kinds of clean energy resources- such as solar power, hydro-power, ocean wave power and so on, wind power is the fastest-growing form of renewable energy at the present time. Moreover, adjustable speed generator wind turbines (ASGWT) has key advantages over the fixed-speed generator wind turbines (FSGWT) in terms of less mechanical stress, improved …

Detection And Control Of Small Civilian Uavs, Matthew Peacock

Theses : Honours

With the increasing proliferation of small civilian Unmanned Aerial Vehicles (UAVs), the threat to critical infrastructure (CI) security and privacy is now widely recognised and must be addressed. These devices are easily available at a low cost, with their usage largely unrestricted allowing users to have no accountability. Further, current implementations of UAVs have little to no security measures applied to their control interfaces. To combat the threat raised by small UAVs, being aware of their presence is required, a task that can be challenging and often requires customised hardware.

This thesis aimed to address the threats posed by the …

Non-Local Model For The Spatial Distribution Of Impact Ionization Events In Avalanche Photodiodes, David A. Ramirez, Majeed M. Hayat, Andrew S. Huntington, George M. Williams

Electrical and Computer Engineering Faculty Research and Publications

We report an extension of the analytical dead space multiplication theory that provides the means to theoretically determine the spatial distribution of electron and hole impact-ionization events in an arbitrarily specified heterojunction multiplication region. The model can be used to understand the role of the dead space in regularizing the locations of impact ionization. It can also be utilized to analyze, design, and optimize new generations of ultra-low noise, multistaged gain avalanche photodiodes based upon judiciously energizing and relaxing carriers to enhance electron impact ionization and suppress hole impact ionization.

A Platinum Nanowire Network As A Highly Effective Current Collector For Intermediate Temperature Solid Oxide Fuel Cells, Hanping Ding, Xingjian Xue

Faculty Publications

We report the fabrication and evaluation of a platinum nanowire network as a highly efficient current collector for solid oxide fuel cells (SOFCs). The ink of carbon-black supported platinum nanoparticles was sprayed onto the cathode. After firing, the carbon black was oxidized and disappeared as carbon dioxide gas while the platinum nanoparticles connect with one another, forming a tree-branch-like nanowire network. The diameters of the nanowires range from 100 nm to 400 nm. Compared to a conventional platinum paste current collector, the polarization resistance of the PrBaCo₂O_5+δ (PBCO) cathode with a nanowire current collector was reduced …

Modeling Of Chemical-Mechanical Couplings In Anode-Supported Solid Oxide Fuel Cells And Reliability Analysis, Xinfang Jin, Xingjian Xue

Faculty Publications

Oxygen ionic transport in conducting ceramics is an important mechanism enabling solid oxide fuel cell (SOFC) technology. The multi-physicochemical processes lead to the fact that the distribution of oxygen vacancy site fraction is not uniform in a positive-electrode electrolyte negative-electrode (PEN) assembly. Different oxygen vacancy concentrations induce different volumetric expansion of ceramics, resulting in complicated chemical–mechanical coupling phenomena and chemical stress in SOFCs. In this research, a mathematical model is developed to study oxygen ionic transport induced chemical stress in an SOFC. The model is validated using experimental polarization curves. Comprehensive simulations are performed to investigate chemical stress distribution in …

Stability Of High Band Gap P3ht: Pcbm Organic Solar Cells Using Tiox Interfacial Layer, Kurniawan Foe, Gon Namkoong, Matthew Samson, Enas M. Younes, Ilho Nam, Tarek M. Abdel-Fattah

Electrical & Computer Engineering Faculty Publications

We fabricated a poly [3-hexylthiophene] (P3HT) and [6,6] -phenyl-C61-butyric acid methyl ester (PC₆₁BM with the TiO_x layer. We found that a solution based TiO_x coated at a spin speed of 3000 rpm improved the photon absorption of the active layer. An optimized TiO_x layer was also used as the interfacial layer to investigate the stability of P3HT: PC₆₁BM OPC. After 70 days of storage, we observed that the short-circuit current density (J_SC) dropped by 16.2%, fill factor (FF) dropped by 10.6%, and power conversion efficiency (PCE) dropped approximately by 25%, while …

Polarization Of Bi2te3 Thin Film In A Floating-Gate Capacitor Structure, Hui Yuan, Kai Zhang, Haitao Li, Hao Zhu, John E. Bonevich, Helmut Baumgart, Curt A. Richter, Qiliang Li

Electrical & Computer Engineering Faculty Publications

Metal-Oxide-Semiconductor (MOS) capacitors with Bi₂Te₃ thin film sandwiched and embedded inside the oxide layer have been fabricated and studied. The capacitors exhibit ferroelectric-like hysteresis which is a result of the robust, reversible polarization of the Bi₂Te₃ thin film while the gate voltage sweeps. The temperature-dependent capacitance measurement indicates that the activation energy is about 0.33 eV for separating the electron and hole pairs in the bulk of Bi₂Te₃, and driving them to either the top or bottom surface of the thin film. Because of the fast polarization speed, potentially excellent …

Atomic Layer Deposition Of Nanolaminate Structures Of Alternating Pbte And Pbse Thermoelectric Films, K. Zhang, A. D. Ramalingom Pillai, K. Bollenbach, D. Nminibapiel, W. Cao, H. Baumgart

Electrical & Computer Engineering Faculty Publications

For this study PbTe and PbSe thin film nanolaminates have been prepared on silicon substrates with native oxide by Atomic Layer Deposition (ALD) using lead(II)bis(2,2,6,6-tetramethyl-3,5-heptanedionato) (Pb(C₁₁H₁₉O₂)(₂), (trimethylsilyl) telluride ((Me₃Si)₂Te) and bis-(triethyl silyl) selane ((Et₃Si)₂Se) as ALD precursors for lead, tellurium and selenium. The experimental evidence revealed the ALD growth of lead telluride and lead selenide followed the Vollmer-Weber island growth mode. We found a strong dependence of the nucleation process on the temperature. In this paper, we present the optimized conditions for growing PbTe …

Numerical Study Of Lipid Translocation Driven By Nanoporation Due To Multiple High-Intensity, Ultrashort Electrical Pulses, Viswanadham Sridhara, Ravindra P. Joshi

Electrical & Computer Engineering Faculty Publications

The dynamical translocation of lipids from one leaflet to another due to membrane permeabilization driven by nanosecond, high-intensity (>100 kV/cm) electrical pulses has been probed. Our simulations show that lipid molecules can translocate by diffusion through water-filled nanopores which form following high voltage application. Our focus is on multiple pulsing, and such simulations are relevant to gauge the time duration over which nanopores might remain open, and facilitate continued lipid translocations and membrane transport. Our results are indicative of a N^1/2 scaling with pulse number for the pore radius. These results bode well for the use of pulse …

Wireless Sensor Localization: Error Modeling And Analysis For Evaluation And Precision, Omar Ali Zargelin

Electronic Theses and Dissertations

Wireless sensor networks (WSNs) have shown promise in a broad range of applications. One of the primary challenges in leveraging WSNs lies in gathering accurate position information for the deployed sensors while minimizing power cost. In this research, detailed background research is discussed regarding existing methods and assumptions of modeling methods and processes for estimating sensor positions. Several novel localization methods are developed by applying rigorous mathematical and statistical principles, which exploit constraining properties of the physical problem in order to produce improved location estimates. These methods are suitable for one-, two-, and three-dimensional position estimation in ascending order of …

Fabrication And Application Of A Polymer Neuromorphic Circuitry Based On Polymer Memristive Devices And Polymer Transistors, Robert A. Nawrocki

Electronic Theses and Dissertations

Neuromorphic engineering is a discipline that aims to address the shortcomings of today's serial computers, namely large power consumption, susceptibility to physical damage, as well as the need for explicit programming, by applying biologically-inspired principles to develop neural systems with applications such as machine learning and perception, autonomous robotics and generic artificial intelligence.

This doctoral dissertation presents work performed fabricating a previously developed type of polymer neuromorphic architecture, termed Polymer Neuromorphic Circuitry (PNC), inspired by the McCulloch-Pitts model of an artificial neuron. The major contribution of this dissertation is a development of processing techniques necessary to realize the Polymer Neuromorphic …

Simplified Method To Derive The Kalman Filter Covariance Matrices To Predict Wind Speeds From A Nwp Model, Conor Lynch, Michael J. O'Mahony, Ted Scully

NIMBUS Articles

This paper espouses a simplified approach to predict wind speed 1 hour ahead for a wind turbine located on the Cork Institute of Technology (CIT) college campus by utilising a Kalman Filter to predict the bias between a campus based turbine and the output from a Numerical Weather Prediction (NWP) model for Cork Airport.

Furthermore, this paper investigates the optimum number of samples required (n) in a fixed sampling interval process to derive the covariance matrix of the system equation Qt and the covariance matrix of the observation equation Rt . The main contents of this paper include …

Developing An At-Home System For Evaluating Manual Wheelchair Propulsion And Directing Rehabilitative Training To Optimize Biomechanical Efficiency, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

No abstract provided.

Timoshenko Beam Model For Lateral Vibration Of Liquid-Phase Microcantilever-Based Sensors, Joshua A. Schultz, Stephen M. Heinrich, Fabien Josse, Isabelle Dufour, Nicholas J. Nigro, Luke A. Beardslee, Oliver Brand

Civil and Environmental Engineering Faculty Research and Publications

Dynamic-mode microcantilever-based devices are potentially well suited to biological and chemical sensing applications. However, when these applications involve liquid-phase detection, fluid-induced dissipative forces can significantly impair device performance. Recent experimental and analytical research has shown that higher in-fluid quality factors (Q) are achieved by exciting microcantilevers in the lateral flexural mode. However, experimental results show that, for microcantilevers having larger width-to-length ratios, the behaviors predicted by current analytical models differ from measurements. To more accurately model microcantilever resonant behavior in viscous fluids and to improve understanding of lateral-mode sensor performance, a new analytical model is developed, incorporating both …

Lightweight Data Compression In Wireless Sensor Networks Using Huffman Coding, Henry P. Medeiros, Marcos C. Maciel, Richard D. Souza, Marcelo E. Pellenz

Electrical and Computer Engineering Faculty Research and Publications

This paper presents a lightweight data compression method for wireless sensor networks monitoring environmental parameters with low resolution sensors. Instead of attempting to devise novel ad hoc algorithms, we show that, given general knowledge of the parameters that must be monitored, it is possible to efficiently employ conventional Huffman coding to represent the same parameter when measured at different locations and time periods. When the data collected by the sensor nodes consists of integer measurements, the Huffman dictionary computed using statistics inferred from public datasets often approaches the entropy of the data. Results using temperature and relative humidity measurements show …

Robust And Resilient State-Dependent Control Of Continuous-Time Nonlinear Systems With General Performance Criteria, Xin Wang, Edwin E. Yaz, James Long

Electrical and Computer Engineering Faculty Research and Publications

A novel state-dependent control approach for continuous-time nonlinear systems with general performance criteria is presented in this paper. This controller is optimally robust for model uncertainties and resilient against control feedback gain perturbations in achieving general performance criteria to secure quadratic optimality with inherent asymptotic stability property together with quadratic dissipative type of disturbance reduction. For the system model, unstructured uncertainty description is assumed, which incorporates commonly used types of uncertainties, such as norm-bounded and positive real uncertainties as special cases. By solving a state-dependent linear matrix inequality at each time, sufficient condition for the control solution can be found …

Dynamic Aspects Of Articulating With A Virtual Vocal Tract In Dysarthria, Jeffrey J. Berry, Cassandra North, Michael T. Johnson

Speech Pathology and Audiology Faculty Research and Publications

No abstract provided.

Thermal Tuning Of Mems Buckled Membrane Actuator Stiffness, Robert A. Lake, Kyle K. Ziegler, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

The thermal tuning characteristics of a microelectromechanical systems (MEMS) buckled membrane exhibiting regions of both positive and negative stiffness is examined and analyzed using finite element method (FEM) simulation and through experimentation. The membranes are fabricated by releasing a silicon/silicon dioxide (Si/SiO₂) laminated membrane from a silicon on insulator (SOI) wafer. The difference in thermal expansion coefficients between Si and SiO2 induces a compressive stress in the SiO₂ layer causing out-of-plane buckling of the membrane. This structure is found to have positive and negative stiffness regions when actuated with a transverse force. It is demonstrated that the …