Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

2014

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1321 - 1350 of 1516

Full-Text Articles in Electrical and Computer Engineering

Dynamic Modeling And Analysis Of Generalized Power Flow Controller, B. Vyakaranam, F. E. Villaseca Jan 2014

Dynamic Modeling And Analysis Of Generalized Power Flow Controller, B. Vyakaranam, F. E. Villaseca

Electrical and Computer Engineering Faculty Publications

This paper presents a unified solution to compute power quality indices in the generalized unified power flow controller (GUPFC) during steady and transient conditions using a dynamic harmonic domain technique. This technique allows the user to analyze harmonics generated in the GUPFC more precisely than using time domain techniques. The derivation of a model is presented and then simulated in the presence of voltage disturbances to demonstrate its use in power quality assessment. The results of the proposed model are validated against time domain simulations.


Semiconductor Laser Based On Thermoelectrophotonics, Xiaohang Liu Jan 2014

Semiconductor Laser Based On Thermoelectrophotonics, Xiaohang Liu

Electronic Theses and Dissertations

This dissertation presents to our knowledge the first demonstration of a quantum well (QW) laser monolithically integrated with internal optical pump based on a light emitting diode (LED). The LED with high efficiency is operated in a thermoelectrophotonic (TEP) regime for which it can absorb both its own emitted light and heat. The LED optical pump can reduce internal optical loss in the QW laser, and enables monolithically integrated TEP heat pumps to the semiconductor laser. The design, growth and fabrication processes of the laser chip are discussed, and its experimental data is presented. In order to further increase the …


Multimaterial Fibers In Photonics And Nanotechnology, Guangming Tao Jan 2014

Multimaterial Fibers In Photonics And Nanotechnology, Guangming Tao

Electronic Theses and Dissertations

Recent progress in combing multiple materials with distinct optical, electronic, and thermomechanical properties monolithically in a kilometer-long fiber drawn from a preform offers unique multifunctionality at a low cost. A wide range of unique in-fiber devices have been developed in fiber form-factor using this strategy. Here, I summary my recent results in this nascent field of 'multimaterial fibers'. I will focus on my achievements in producing robust infrared optical fibers and in appropriating optical fiber production technology for applications in nanofabrication. The development of optical components suitable for the infrared (IR) is crucial for applications in this spectral range to …


Laser Filamentation - Beyond Self-Focusing And Plasma Defocusing, Khan Lim Jan 2014

Laser Filamentation - Beyond Self-Focusing And Plasma Defocusing, Khan Lim

Electronic Theses and Dissertations

Laser filamentation is a highly complex and dynamic nonlinear process that is sensitive to many physical parameters. The basic properties that define a filament consist of (i) a narrow, high intensity core that persists for distances much greater than the Rayleigh distance, (ii) a low density plasma channel existing within the filament core, and (iii) a supercontinuum generated over the course of filamentation. However, there remain many questions pertaining to how these basic properties are affected by changes in the conditions in which the filaments are formed; that is the premise of the work presented in this dissertation. To examine …


Distribution Of Laser Induced Heating In Multi-Component Chalcogenide Glass And Its Associated Effects, Laura Sisken Jan 2014

Distribution Of Laser Induced Heating In Multi-Component Chalcogenide Glass And Its Associated Effects, Laura Sisken

Electronic Theses and Dissertations

Chalcogenide glasses are well known to have good transparency into the infrared spectrum. These glasses though tend to have low thresholds as compared to oxide glasses for photo-induced changes and thermally-induced changes. Material modification such as photo-induced darkening, bleaching, refractive index change, densification or expansion, ablation of crystallization have been demonstrated, and are typically induced by a thermal furnace-based heat treatment, an optical source such as a laser, or a combination of photo-thermal interactions. Solely employing laser-based heating has an advantage over a furnace, since one has the potential to be able to spatially modify the materials properties with much …


Highly-Sensitive Stoichiometric Analysis Of Yag Ceramics Using Laser-Induced Breakdown Spectroscopy (Libs), Jahromi, Ali Kazemi Jan 2014

Highly-Sensitive Stoichiometric Analysis Of Yag Ceramics Using Laser-Induced Breakdown Spectroscopy (Libs), Jahromi, Ali Kazemi

Electronic Theses and Dissertations

Transparent ceramics are an important class of optical materials with applications in high-strength windows, radiation detectors and high-power lasers. Despite the many successful developments of the past decades, their challenging fabrication still needs to be perfected to achieve a better consistency in optical quality. In particular, ternary phase materials such as Yttrium Aluminum Garnet (YAG, Y3Al5O12), a long standing high-power laser host, require a precise control of stoichiometry, often beyond the precision of current analytical techniques, in order to reduce scattering losses and the presence of deleterious point defects. This work explores the potential of Laser-Induced Breakdown Spectroscopy (LIBS) for …


Broad Bandwidth, All-Fiber, Thulium-Doped Photonic Crystal Fiber Amplifier For Potential Use In Scaling Ultrashort Pulse Peak Powers, Alex Sincore Jan 2014

Broad Bandwidth, All-Fiber, Thulium-Doped Photonic Crystal Fiber Amplifier For Potential Use In Scaling Ultrashort Pulse Peak Powers, Alex Sincore

Electronic Theses and Dissertations

Fiber based ultrashort pulse laser sources are desirable for many applications; however generating high peak powers in fiber lasers is primarily limited by the onset of nonlinear effects such as self-phase modulation, stimulated Raman scattering, and self-focusing. Increasing the fiber core diameter mitigates the onset of these nonlinear effects, but also allows unwanted higher-order transverse spatial modes to propagate. Both large core diameters and single-mode propagation can be simultaneously attained using photonic crystal fibers. Thulium-doped fiber lasers are attractive for high peak power ultrashort pulse systems. They offer a broad gain bandwidth, capable of amplifying sub-100 femtosecond pulses. The longer …


Children-Robot Interaction: Eye Gaze Analysis Of Children With Autism During Social Interactions, Seyedmohammad Mavadati, Huanghao Feng, S. Silver, Anibal Gutierrez, Mohammad H. Mahoor Jan 2014

Children-Robot Interaction: Eye Gaze Analysis Of Children With Autism During Social Interactions, Seyedmohammad Mavadati, Huanghao Feng, S. Silver, Anibal Gutierrez, Mohammad H. Mahoor

Electrical and Computer Engineering: Graduate Student Scholarship

Background:

Typical developing individuals utilize the direction of eye gaze and eye fixation/shifting as crucial elements to transmit socially relevant information (e.g. like, dislike) to others. Individuals with Autism Spectrum Disorder (ASD), deviant pattern of mutual eye gaze is a noticeable feature that may be one of the earliest (detectable) demonstrations of impaired social skills that would lead to other deficits in ASD Individuals (e.g. delaying development of social cognition and affective construal processes). This can significantly affect the quality of human’s social interactions. Recent studies reveal that children with ASD have superior engagement to the robot-based interaction, and it …


Techniques For Characterization Of Third Order Optical Nonlinearities, Manuel Ferdinandus Jan 2014

Techniques For Characterization Of Third Order Optical Nonlinearities, Manuel Ferdinandus

Electronic Theses and Dissertations

This dissertation describes the development of novel techniques for characterization of nonlinear properties of materials. The dissertation is divided into two parts, a background and theory section and a technique development section. In the background and theory section we explain the origins of the nonlinear optical response of materials across many different spatial and temporal scales. The mechanisms that we are most interested in are the electronic nuclear and reorientational responses, which occur on the range of sub-femtosecond to several picoseconds. The electronic mechanism is due to the electrons of a material experiencing a non-parabolic potential well due a strong …


Multimaterial Fibers And Tapers A Platform For Nonlinear Photonics And Nanotechnology, Soroush Shabahang Jan 2014

Multimaterial Fibers And Tapers A Platform For Nonlinear Photonics And Nanotechnology, Soroush Shabahang

Electronic Theses and Dissertations

The development of optical sources and components suitable for the mid-infrared is crucial for applications in this spectral range to reach the maturity level of their counterparts in the visible and near-infrared spectral regimes. The recent commercialization of quantum cascade lasers is leading to further interest in this spectral range. Wideband mid-infrared coherent sources, such as supercontinuum generation, have yet to be fully developed. A mid-infrared supercontinuum source would allow for unique applications in spectroscopy and sensing. Over the last decade, it has been shown that high-index confinement in highly nonlinear fibers pumped with high-peak-power pulses is an excellent approach …


Comparison Of Computer-Based And Optical Face Recognition Paradigms, Abdulaziz A. Alorf Jan 2014

Comparison Of Computer-Based And Optical Face Recognition Paradigms, Abdulaziz A. Alorf

Dissertations, Master's Theses and Master's Reports - Open

The main objectives of this thesis are to validate an improved principal components analysis (IPCA) algorithm on images; designing and simulating a digital model for image compression, face recognition and image detection by using a principal components analysis (PCA) algorithm and the IPCA algorithm; designing and simulating an optical model for face recognition and object detection by using the joint transform correlator (JTC); establishing detection and recognition thresholds for each model; comparing between the performance of the PCA algorithm and the performance of the IPCA algorithm in compression, recognition and, detection; and comparing between the performance of the digital model …


Real Time Fuzzy Controller For Quadrotor Stability Control, Pranav S. Bhatkhande Jan 2014

Real Time Fuzzy Controller For Quadrotor Stability Control, Pranav S. Bhatkhande

Dissertations, Master's Theses and Master's Reports - Open

In this report, we develop an intelligent adaptive neuro-fuzzy controller by using adaptive neuro fuzzy inference system (ANFIS) techniques. We begin by starting with a standard proportional-derivative (PD) controller and use the PD controller data to train the ANFIS system to develop a fuzzy controller. We then propose and validate a method to implement this control strategy on commercial off-the-shelf (COTS) hardware.

An analysis is made into the choice of filters for attitude estimation. These choices are limited by the complexity of the filter and the computing ability and memory constraints of the micro-controller. Simplified Kalman filters are found to …


Design And Implementation Of Home Use Portable Smart Electronics, Liqiang Du Jan 2014

Design And Implementation Of Home Use Portable Smart Electronics, Liqiang Du

Dissertations, Master's Theses and Master's Reports - Open

The widespread of low cost embedded electronics makes it easier to implement the smart devices that can understand either the environment or the user behaviors. The main object of this project is to design and implement home use portable smart electronics, including the portable monitoring device for home and office security and the portable 3D mouse for convenient use. Both devices in this project use the MPU6050 which contains a 3 axis accelerometer and a 3 axis gyroscope to sense the inertial motion of the door or the human hands movement.

For the portable monitoring device for home and office …


Integration Of Instrumentation And Processing Software Of A Laser Speckle Contrast Imaging System, Jacob James Carrick Jan 2014

Integration Of Instrumentation And Processing Software Of A Laser Speckle Contrast Imaging System, Jacob James Carrick

Dissertations, Master's Theses and Master's Reports - Open

Laser speckle contrast imaging (LSCI) has the potential to be a powerful tool in medicine, but more research in the field is required so it can be used properly. To help in the progression of Michigan Tech's research in the field, a graphical user interface (GUI) was designed in Matlab to control the instrumentation of the experiments as well as process the raw speckle images into contrast images while they are being acquired. The design of the system was successful and is currently being used by Michigan Tech's Biomedical Engineering department. This thesis describes the development of the LSCI GUI …


Multidimensional Optimal Droop Control For Wind Resources In Dc Microgrids, Kaitlyn J. Bunker Jan 2014

Multidimensional Optimal Droop Control For Wind Resources In Dc Microgrids, Kaitlyn J. Bunker

Dissertations, Master's Theses and Master's Reports - Open

Two important and upcoming technologies, microgrids and electricity generation from wind resources, are increasingly being combined. Various control strategies can be implemented, and droop control provides a simple option without requiring communication between microgrid components. Eliminating the single source of potential failure around the communication system is especially important in remote, islanded microgrids, which are considered in this work. However, traditional droop control does not allow the microgrid to utilize much of the power available from the wind. This dissertation presents a novel droop control strategy, which implements a droop surface in higher dimension than the traditional strategy. The droop …


High Performance, Low Cost Subspace Decomposition And Polynomial Rooting For Real Time Direction Of Arrival Estimation: Analysis And Implementation, Mrudula V. Athi Jan 2014

High Performance, Low Cost Subspace Decomposition And Polynomial Rooting For Real Time Direction Of Arrival Estimation: Analysis And Implementation, Mrudula V. Athi

Dissertations, Master's Theses and Master's Reports - Open

This thesis develops high performance real-time signal processing modules for direction of arrival (DOA) estimation for localization systems. It proposes highly parallel algorithms for performing subspace decomposition and polynomial rooting, which are otherwise traditionally implemented using sequential algorithms. The proposed algorithms address the emerging need for real-time localization for a wide range of applications. As the antenna array size increases, the complexity of signal processing algorithms increases, making it increasingly difficult to satisfy the real-time constraints. This thesis addresses real-time implementation by proposing parallel algorithms, that maintain considerable improvement over traditional algorithms, especially for systems with larger number of antenna …


Proof Of Concept Prototype For A Railroad Pedestrian Warning System Using Wireless Sensor Networks, Puneeth Ramesh Jan 2014

Proof Of Concept Prototype For A Railroad Pedestrian Warning System Using Wireless Sensor Networks, Puneeth Ramesh

Dissertations, Master's Theses and Master's Reports - Open

Wireless sensor network is an emerging research topic due to its vast and ever-growing applications. Wireless sensor networks are made up of small nodes whose main goal is to monitor, compute and transmit data. The nodes are basically made up of low powered microcontrollers, wireless transceiver chips, sensors to monitor their environment and a power source. The applications of wireless sensor networks range from basic household applications, such as health monitoring, appliance control and security to military application, such as intruder detection.

The wide spread application of wireless sensor networks has brought to light many research issues such as battery …


State Of Charge Based Droop Surface For Optimal Control Of Dc Microgrids, Arthur John Jones Jan 2014

State Of Charge Based Droop Surface For Optimal Control Of Dc Microgrids, Arthur John Jones

Dissertations, Master's Theses and Master's Reports - Open

For a microgrid with a high penetration level of renewable energy, energy storage use becomes more integral to the system performance due to the stochastic nature of most renewable energy sources. This thesis examines the use of droop control of an energy storage source in dc microgrids in order to optimize a global cost function. The approach involves using a multidimensional surface to determine the optimal droop parameters based on load and state of charge. The optimal surface is determined using knowledge of the system architecture and can be implemented with fully decentralized source controllers. The optimal surface control of …


Characterization Of The Atmospheric Effects On The Transmission Of Thermal Radiation, Mohamed E. Hanafy Jan 2014

Characterization Of The Atmospheric Effects On The Transmission Of Thermal Radiation, Mohamed E. Hanafy

Dissertations, Master's Theses and Master's Reports - Open

Atmospheric scattering plays a crucial rule in degrading the performance of electro optical imaging systems operating in the visible and infra-red spectral bands, and hence limits the quality of the acquired images, either through reduction of contrast or increase of image blur. The exact nature of light scattering by atmospheric media is highly complex and depends on the types, orientations, sizes and distributions of particles constituting these media, as well as wavelengths, polarization states and directions of the propagating radiation. Here we follow the common approach for solving imaging and propagation problems by treating the propagating light through atmospheric media …


Functionalized Membranes For Environmental Remediation And Selective Separation, Li Xiao Jan 2014

Functionalized Membranes For Environmental Remediation And Selective Separation, Li Xiao

Theses and Dissertations--Chemical and Materials Engineering

Membrane process including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) have provided numerous successful applications ranging from drinking water purification, wastewater treatment, to material recovery. The addition of functional moiety in the membranes pores allows such membranes to be used in challenging areas including tunable separations, toxic metal capture, and catalysis. In this work, polyvinylidene fluoride (PVDF) MF membrane was functionalized with temperature responsive (poly(N-isopropylacrylamide), PNIPAAm) and pH responsive (polyacrylic acid, PAA) polymers. It’s revealed that the permeation of various molecules (water, salt and dextran) through the membrane can be thermally or pH controlled. The introduction of …


Thermal Tuning Of Mems Buckled Membrane Actuator Stiffness, Robert A. Lake, Kyle K. Ziegler, Ronald A. Coutu Jr. Jan 2014

Thermal Tuning Of Mems Buckled Membrane Actuator Stiffness, Robert A. Lake, Kyle K. Ziegler, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

The thermal tuning characteristics of a microelectromechanical systems (MEMS) buckled membrane exhibiting regions of both positive and negative stiffness is examined and analyzed using finite element method (FEM) simulation and through experimentation. The membranes are fabricated by releasing a silicon/silicon dioxide (Si/SiO2) laminated membrane from a silicon on insulator (SOI) wafer. The difference in thermal expansion coefficients between Si and SiO2 induces a compressive stress in the SiO2 layer causing out-of-plane buckling of the membrane. This structure is found to have positive and negative stiffness regions when actuated with a transverse force. It is demonstrated that the …


Turbo Equalization For Multiple-Input Multiple-Output (Mimo) Wireless Communication Systems, Longbao Wang Jan 2014

Turbo Equalization For Multiple-Input Multiple-Output (Mimo) Wireless Communication Systems, Longbao Wang

Doctoral Dissertations

"This dissertation investigates both of the frequency domain and time domain turbo equalization with multiple-input multiple-output (MIMO) fading channels for radio frequency and underwater acoustic communications. First, a low complexity frequency domain turbo equalization (FDTE) is proposed for the MIMO systems with zero padding (ZP) or cyclic prefix (CP) inserted between the transmitted data blocks and its performance is tested on the real-world UWA communications experiments.

Second, as high speed communication system requires efficient bandwidth usage and power consumption, CP or ZP is not transmitted as auxiliary information. An inter-block interference cancelation and CP reconstruction algorithm is developed to re-arrange …


Emission Source Microscopy For Electromagnetic Interference Source Localization, Pratik Rajesh Maheshwari Jan 2014

Emission Source Microscopy For Electromagnetic Interference Source Localization, Pratik Rajesh Maheshwari

Doctoral Dissertations

"For complex and large systems with multiple sources, it is often difficult to localize the sources of radiation. Near-field electromagnetic scanning is used often for root-cause diagnosis by determining field distribution close to the PCB. In the near-field, the evanescent waves are dominant, which may lead to the misinterpretation of them being the dominant sources contributing to the far-field. Another limitation of near-field scanning is that the probe may not be able to access all locations near the PCB due to the complex geometry and high component density. Two-dimensional synthetic aperture radar is a well-known technique used for antenna diagnostic …


Maximum Crosstalk Estimation And Modeling Of Electromagnetic Radiation From Pcb/High-Density Connector Interfaces, Matthew Scott Halligan Jan 2014

Maximum Crosstalk Estimation And Modeling Of Electromagnetic Radiation From Pcb/High-Density Connector Interfaces, Matthew Scott Halligan

Doctoral Dissertations

"This dissertation explores two topics pertinent to electromagnetic compatibility research: maximum crosstalk estimation in weakly coupled transmission lines and modeling of electromagnetic radiation resulting from printed circuit board/high-density connector interfaces. Despite an ample supply of literature devoted to the study of crosstalk, little research has been performed to formulate maximum crosstalk estimates when signal lines are electrically long. Paper one illustrates a new maximum crosstalk estimate that is based on a mathematically rigorous, integral formulation, where the transmission lines can be lossy and in an inhomogeneous media. Paper two provides a thorough comparison and analysis of the newly derived maximum …


Modeling And Estimation Of Crosstalk Across A Channel With Multiple, Non-Parallel Coupling And Crossings Of Multiple Aggressors In Practical Pcbs, Arun Reddy Chada Jan 2014

Modeling And Estimation Of Crosstalk Across A Channel With Multiple, Non-Parallel Coupling And Crossings Of Multiple Aggressors In Practical Pcbs, Arun Reddy Chada

Doctoral Dissertations

"In Section 1, the focus is on alleviating the modeling challenges by breaking the overall geometry into small, unique sections and using either a Full-Wave or fast equivalent per-unit-length (Eq. PUL) resistance, inductance, conductance, capacitance (RLGC) method or a partial element equivalent circuit (PEEC) for the broadside coupled traces that cross at an angle. The simulation challenge is resolved by seamlessly integrating the models into a statistical simulation tool that is able to quantify the eye opening at BERs that would help electrical designers in locating crosstalk sensitive regions in the high speed backplane channel designs.

Section 2 investigates the …


Femtosecond Laser Micro-Machined Optical Fiber Based Embeddable Strain And Temperature Sensors For Structural Monitoring, Armadeep Kaur Jan 2014

Femtosecond Laser Micro-Machined Optical Fiber Based Embeddable Strain And Temperature Sensors For Structural Monitoring, Armadeep Kaur

Doctoral Dissertations

"Structural monitoring technology is becoming increasingly important for managing all types of structures. Embedding sensors while constructing new structures or repairing the old ones allows for continual monitoring of structural health thus giving an estimate of remaining utility. Along with being embeddable, miniaturized sensors that are easy to handle are highly sought after in the industry where in-situ monitoring is required in a harsh environment (corrosive atmosphere, high temperatures, high pressure etc.).

This dissertation demonstrates the use of femtosecond laser-fabricated Fabry-Perot interferometer (FPI) based optical fiber sensors for embedded applications like structural health monitoring. Two types of Fabry-Perot interferometer sensors, …


Radio Frequency Interference (Rfi) Modeling Of Complex Modules In Mobile Devices And System-Level Modeling For Transient Esd Simulation, Tianqi Li Jan 2014

Radio Frequency Interference (Rfi) Modeling Of Complex Modules In Mobile Devices And System-Level Modeling For Transient Esd Simulation, Tianqi Li

Doctoral Dissertations

"The thesis is composed of three papers, which cover the systematic modeling of radio-frequency-interference (RFI) and electro-static-discharge (ESD) problems happened in mobile devices.

In the first paper, an averaging technique is developed, for phase resolved scanning over random fields generated by multiple uncorrelated stochastic sources. This method can separate the field contribution of each noise source and resulting field patterns as if the out-of-interest sources were turned off. The scanned data can be used for emission source localization, far-field pattern calculation and Huygens's box modeling.

In the second paper, using Huygens's Equivalent Theorem a systematic approach for the modeling of …


Optimization In Microgrid Design And Energy Management, Tu Anh Nguyen Jan 2014

Optimization In Microgrid Design And Energy Management, Tu Anh Nguyen

Doctoral Dissertations

"The dissertation is composed of three papers, which cover microgrid systems performance characterization, optimal sizing for energy storage system and stochastic optimization of microgrid operation. In the first paper, a complete Photovoltaic-Vanadium Redox Battery (VRB) microgrid is characterized holistically. The analysis is based on a prototype system installation deployed at Fort Leonard Wood, Missouri, USA. In the second paper, the optimal sizing of power and energy ratings for a VRB system in isolated and grid-connected microgrids is proposed. An analytical method is developed to solve the problem based on a per-day cost model in which the operating cost is obtained …


Modeling And Optimization Of Energy Storage System For Microgrid, Xin Qiu Jan 2014

Modeling And Optimization Of Energy Storage System For Microgrid, Xin Qiu

Doctoral Dissertations

"The vanadium redox flow battery (VRB) is well suited for the applications of microgrid and renewable energy. This thesis will have a practical analysis of the battery itself and its application in microgrid systems. The first paper analyzes the VRB use in a microgrid system.

The first part of the paper develops a reduced order circuit model of the VRB and analyzes its experimental performance efficiency during deployment. The statistical methods and neural network approximation are used to estimate the system parameters. The second part of the paper addresses the implementation issues of the VRB application in a photovoltaic-based microgrid …


Advanced Active Rectifiers For Electric Vehicle Battery Charging, Darren Lee Paschedag Jan 2014

Advanced Active Rectifiers For Electric Vehicle Battery Charging, Darren Lee Paschedag

Doctoral Dissertations

"In a big picture sense, the work presented in this dissertation is in the area of fully electric or plug-in hybrid electric vehicles. Both of these vehicle types require an external power source to fully charge their large amount of energy storage. For most consumers this means plugging their vehicle into the utility which necessitates battery charging circuitry. More specifically, this dissertation focuses on the power factor correction (PFC) circuit which makes up one part of a typical battery charging system. The circuits presented here are not dependent on battery chemistry, so they can be utilized with all popular chemistries …