Electrical and Computer Engineering Commons^™

The Study On Carbon Nanotube-Loaded Pt Catalysts For Proton Exchange Membrane Fuel Cells, Hong Zhu, Feng-Juan Ge, Xiao-Hong Kang, Yu-Guo Yang, Yun-Hua Xu

Journal of Electrochemistry

Carbon nanotube-supported-platinum (Pt/CNTs) and carbon-supported-platinum (Pt/C) catalysts were synthesized by in-situ chemical reduction. They were analyzed using TEM and XRD, then made into electrodes to be part of assemable PEMFC for the performence tests. The resulted show that Pt clusters in both catalysts are of small particle size (about 4nm), and Pt/CNTs exhibits a higher catalytic activity than Pt/C.

Study On Degradation Of Phenol By Electrochemical Oxidation, Yue-Li Liu, Hong-Hua Ge

Journal of Electrochemistry

Electrochemical oxidation of phenol was carried out by the Dimensionally Stable Anodes (DSA) electrode, which has been discarded as waste by alkali chloride factory. The result indicates that a good phenol removal can be obtained under certain phenol concentration by the DSA electrode. The key factor in effecting phenol removal of electrochemical oxidation is applied current density, the following factors are pH, electrolyte concentration and phenol concentration. After experiments, the optimal test conditions are 30 mA/cm², pH 10, electrolyte concentration 10 mg/L, phenol concentration 10 mg/L.67% CODcr removal and 90% absorbance removal are gained by electrochemical oxidation for …

Adsorption And Oxidation Of Phenol Electrode Processes, Bao-Cheng Wang, Yan-Ping Sun, Jin-Hua Zhu

Journal of Electrochemistry

The electrochemical behaviors of platinum electrode were studied by cyclic voltammetry in 1mol/L sulfuric acid solution and 1mol/L sulfuric acid solution contained phenol. The adsorption characteristics of phenol and the intermediat on electrode surface have been discussed. The reactive reversibility and oxidation mechanism of phenol on electrode process have been investigated.The potential of characteristic adsorption was suggested. The various products woud be formed when the electrode potential was greater than the one of characteristic adsorption.

The Current Fluctuations Of Carbon Steel In Nano2-Nacl Solutions, Yu-Ming Tang, Yu Zuo

Journal of Electrochemistry

The characteristics of current fluctuations of A3 carbon steel in NaNO₂-NaCl solutions were studied with potentiostatic and potentiodynamic polarization methods. The steel remained stable passivation in 0.1 mol/L NaNO₂ solution without Cl^-. After NaCl was added in to the solution, current fluctuations with a characteristic of quick increase and slow decrease occurred, indicating quick dissolution and slow re-passivation of the metastable pits. The metastable pitting may cause accumulated corrosion damage around certain area and result in observable pits. With the increase of chloride concentration, the occurring potential for metastable pits Em rised, and peak values …

Extended Hough Methodology For 3d Feature Detection, Rufus H. Cofer, Samuel Peter Kozaitis, Jihun Cha

Electrical Engineering and Computer Science Faculty Publications

In an effort to make automatically detect image features for pattern recognition, we described a 3-dimensional (3-D) Hough transform. We describe two interlocking theoretical extensions to greatly enhance the Hough transform's ability to handle finite lineal features and allow directed search for various features while balancing memory and computational complexity. We computed the 2-D Hough transform of 1-D slices of an image which results in a 2-D to 3-D transform. Features such as line segments will cluster in a particular location so that both line orientation and spatial extent can be determined. This approach allows the Hough transform to be …

Preliminary Assessment Of Experimental Sophomore Ee Courses, James G. Harris, Kena Burke

Electrical Engineering

In academic year 2001-2002, an experimental yearlong sequence of courses was taught to EE and CPE majors that replaced the traditional circuits and electronics sequence of required courses. The experimental sequence consisted of three quarters, with the first quarter devoted to digital signal processing, and the next two quarters formed from an integrated approach to circuits and electronics. The two sections of students who took the experimental course now are taking the junior year required courses in their major. An assessment is being made to compare the experimental students with a cohort of traditional students. Preliminary results are given for …

Double-Scaled Potential Profile In A Group-Iii Nitride Alloy Revealed By Monte Carlo Simulation Of Exciton Hopping, K. Kazlauskas, G. Tamulaitis, A. Zukauskas, M. A. Khan, J. W. Yang, J. Zhang, Grigory Simin, M. S. Shur, R. Gaska

Faculty Publications

The temperature dependences of the peak position and width of the photoluminescence band in Al_0.1In_0.01Ga_0.89N layers were explained by Monte Carlo simulation of exciton localization and hopping. The introduction of a doubled-scaled potential profile due to inhomogeneous distribution of indium allowed obtaining a good quantitative fit of the experimental data. Hopping of excitons was assumed to occur through localized states distributed on a 16 meV energy scale within the In-rich clusters with the average energy in these clusters dispersed on a larger (42 meV) scale.

A Four-Level Crossing Dc/Dc Converter Based Drive System, X. Kou, Keith Corzine

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a novel crossing front-end dc/dc converter for a four-level drive system which provides a voltage boost as well as dc capacitor bank voltage regulation. The primary advantage of the proposed converter is that it simplifies the control of the four-level diode-clamped inverter since capacitor voltage balancing is not required by the inverter control. Furthermore, the inverter modulation index can be varied up to its physical limitation. An average-value model of the converter is derived and used for insight and analysis of the converter operation. Detailed simulations of the four-level drive system demonstrate the effectiveness of the proposed …

Melanoma And Seborrheic Keratosis Differentiation Using Texture Features, Srinivas V. Deshabhoina, Scott E. Umbaugh, William V. Stoecker, Randy Hays Moss, Subhashini K. Srinivasan

Chemistry Faculty Research & Creative Works

Purpose: To explore texture features in two-dimensional images to differentiate seborrheic keratosis from melanoma.

Methods: A systematic approach to consistent classification of skin tumors is described. Texture features, based on the second-order histogram, were used to identify the features or a combination of features that could consistently differentiate a malignant skin tumor (melanoma) from a benign one (seborrheic keratosis). Two hundred and seventy-one skin tumor images were separated into training and test sets for accuracy and consistency. Automatic induction was applied to generate classification rules. Data analysis and modeling tools were used to gain further insight into the feature space. …

Design And Characterization Of Null Convention Self-Timed Multipliers, Satish K. Bandapati, Scott C. Smith, Minsu Choi

Electrical and Computer Engineering Faculty Research & Creative Works

Self-timed multipliers, designed using the delay-insensitive null convention logic (NCL) paradigm, were analyzed. NCL require less power, generate less noise, produce less electromagnetic interference, and allow easier reuse of components. Simulation results show a large variance in circuit performance in terms of power, area, and speed. NCL paradigm also represent bit-serial, iterative, and fully parallel multiplication architectures. They reduce the effort required to ensure correct operation under all timing scenarios, compared to equivalent synchronous designs.

An Improved Simulation Model For Spaceborne Scatterometer Measurements, David G. Long, Peter K. Yoho

Faculty Publications

Development of scatterometer designs and applications requires extensive data simulation. The advancing capabilities of instruments motivates our proposal for an improved simulation model for noisy scatterometer measurements. Previous simulation models do not separately account for the two forms of random variation - signal fading and additive noise - which affect scatterometer measurements. The proposed model is able to generate data that are statistically equivalent (in a mean and variance sense) to actual instrument measurements by accounting for both variations, while maintaining ease of implementation. The model is particularly adept at handling design tradeoffs related to signal-to-noise ratios by appropriately separating …

Synergetic Control For Dc-Dc Boost Converter: Implementation Options, Enrico Santi, Antonello Monti, Donghong Li, Karthik Proddutur, Roger A. Dougal

Faculty Publications

The theory of synergetic control was introduced in a power electronics context in a previous paper. In this paper, we review the theory, then focus on some practical aspects with reference to both simulations and actual hardware. In particular, we address management of the current limit condition and solve it with several different approaches. Adaptive and other control laws are also introduced to improve the control performance. The various controls are evaluated by applying the classical voltage reference step test and the step load test.

Oci-Based Group Communication Support In Corba, Dongman Lee, Dukyun Nam, Hee Yong Youn, Chansu Yu

Electrical and Computer Engineering Faculty Publications

Group communication is a useful mechanism guaranteeing consistency among replicated objects. The existing approaches do not allow transparent plug-in of group communication protocols into CORBA. They either require modification of CORBA or OS, or provide no room for incorporating group communication transport protocols into CORBA. We thus propose a generic group communication framework that allows transparent plug-in of various group communication protocols with no modification of existing CORBA. We extend the open communications interface (OCI) to support interoperability, reusability of existing group communication, and independency on ORB and OS. We also define the group communication inter-ORB protocol (GCIOP) as a …

Kalman Filtering For Fuzzy Discrete Time Dynamic Systems, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

This paper uses Kalman filter theory to design a state estimator for noisy discrete time Takagi–Sugeno (T–S) fuzzy models. One local filter is designed for each local linear model using standard Kalman filter theory. Steady state solutions can be found for each of the local filters. Then a linear combination of the local filters is used to derive a global filter. The local filters are time-invariant, which greatly reduces the computational complexity of the global filter. The global filter is shown to be unbiased and (under certain conditions) stable. In addition, under the approximation of uncorrelatedness among the local models, …

Swift Electro-Optic Modulator, Geofrey Craig Harston

Theses and Dissertations

The Silicon Wafer Integrated Fiber Technology, SWIFT, is a novel platform for the development of photonic devices. SWIFT is comprised of an optical fiber, specifically a D-fiber in this work, embedded into a V-groove etched into a silicon wafer. This provides a method to secure the fiber and allows the use of standard semiconductor industry equipment and techniques in latter processing for device fabrication.

The SWIFT platform is used as the basis for the development of a polarimetric in-fiber electro-optic modulator. The modulator is based on the application of a nonlinear optical polymer, NLOP, film into the evanescent field of …

Vector Dissipativity Theory For Discrete-Time Large-Scale Nonlinear Dynamical Systems, Wassim M. Haddad, Qing Hui, Vijaysekhar Chellaboina, Sergey Nersesov

Department of Electrical and Computer Engineering: Faculty Publications

In analyzing large-scale systems, it is often desirable to treat the overall system as a collection of interconnected subsystems. Solution properties of the large-scale system are then deduced from the solution properties of the individual subsystems and the nature of the system interconnections. In this paper, we develop an analysis framework for discrete-time large-scale dynamical systems based on vector dissipativity notions. Specifically, using vector storage functions and vector supply rates, dissipativity properties of the discrete-time composite large-scale system are shown to be determined from the dissipativity properties of the subsystems and their interconnections. In particular, extended Kalman-Yakubovich-Popov conditions, in terms …

Detection Of Weak Transitions In Signal Dynamics Using Recurrence Time Statistics, J. B. Gao, Yinhe Cao, Lingyun Gu, J. G. Harris, J. C. Principe

Electrical and Computer Engineering Faculty Research & Creative Works

Signal detection in noisy and nonstationary environments is very challenging. In this Letter, we study why the two types of recurrence times [Phys. Rev. Lett. 83 (1999) 3178] may be very useful for detecting weak transitions in signal dynamics. We particularly emphasize that the recurrence times of the second type may be more powerful in detecting transitions with very low energy. These features are illustrated by studying a number of speech signals with fricatives and plosives. We have also shown that the recurrence times of the first type, nevertheless, has the distinguished feature of being more robust to the noise …

Hgcdte Focal Plane Array Cost Modeling, Thomas J. Sanders, Glenn T. Hess

Electrical Engineering and Computer Science Faculty Publications

Focal plane arrays (FPAs) are used in many applications for detecting infrared (IR) radiation where normal sight with light in the visible spectrum is not possible. To effectively detect this IR radiation, complex semiconductor diodes, cooled to low temperatures, are usually used. The most common of these semiconductor materials is the II-VI alloy semiconductor system using HgCdTe, which is often called MCT. Focal plane arrays with over 1000 pixels have been fabricated. The cost of these very complex systems is becoming a very important consideration in decisions of where to use these FPAs. The focal plane array actually consists of …

Polyphase Filter With Low-Pass Response, Vladimir I. Prodanov, Peter Kiss, Mihai Banu

Electrical Engineering

A complex low-pass filter that reduces the influence of component mismatch. The filter includes a first filter section for effecting a first single pole transfer function and a second filter section for effecting a second single pole transfer function, where the first and the second single pole transfer functions collectively define a conjugate pair of poles. In higher order low-pass filters, an optimal cascade order follows a shoestring pattern.

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase Iii Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. The third phase concludes the experimental a fluid flow study and optimization study. The first quarter and second quarter of phase three also begins the experimental set-up of secondary emission studies from niobium in superconducting mode. This …

Combined Beamforming And Space-Time Block Coding With Sparse Array Antennas, Robert H. Morelos-Zaragoza, Mohammad Ghavami

Faculty Publications

No abstract provided.

Polymer-Based Capacitors, Junction Field -Effect Transistors, And A Follower Circuit By Lithography, Self -Assembly, And Ink -Jet Printing Techniques, Yuxin Liu

Doctoral Dissertations

The study of organic materials to create field-effect transistors has recently emerged and is gaining much interest. All-polymer electronic devices are currently in their infancy, like semiconductor devices when they first appeared. As a result, current performance of these devices is in no way comparable to the state-of-the-art semiconductor devices. However, all-polymer devices have a few possible appealing advantages. First, all polymer devices have the potential for low-cost fabrication due to their ease of manufacturability, with fewer and simpler processing steps compared with solid-state semiconductor devices. Secondly, polymer devices offer the ability of material flexibility. Lastly, polymer devices may prove …

Examination Of Focused Beam Propagation Through A Finite Non-Reciprocal Planar Chiral Slab Using Complex Fresnel Coefficients And Dual Transforms, Monish Ranjan Chatterjee, Sumit Nema, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Recently, uniform plane wave propagation across a nonchiral-chiral interface was examined via the development of appropriate Fresnel coefficients. In this extension, propagation of focused uniform and profiled beams through a finite, planar nonreciprocal chiral slab is investigated using complex Fresnel coefficients via angular plane wave decomposition and dual transforms.

Modeling And Analysis Of Fault Tolerant Multistage Interconnection Networks, Minsu Choi, Nohpill Park, Fabrizio Lombardi

Electrical and Computer Engineering Faculty Research & Creative Works

Performance and reliability are two of the most crucial issues in today's high-performance instrumentation and measurement systems. High speed and compact density multistage interconnection networks (MINs) are widely-used subsystems in different applications. New performance models are proposed to evaluate a novel fault tolerant MIN arrangement, thereby assuring performance and reliability with high confidence level. A concurrent fault detection and recovery scheme for MINs is considered by rerouting over redundant interconnection links under stringent real-time constraints for digital instrumentation as sensor networks. A switch architecture for concurrent testing and diagnosis is proposed. New performance models are developed and used to evaluate …

Statistical Approach To The Emi Modeling Of Large Asics By A Single Noise-Current Source, Giulio Antonini, James L. Drewniak, Marco Leone, Antonio Orlandi, Vittorio Ricchiuti

Electrical and Computer Engineering Faculty Research & Creative Works

Large and complex ASICs are source of propagating noise inside the powerbus planes. A lumped noise source model is proposed and validated by means of a statistics based method.

Suitability Of Pulse Train™, A Novel Digitally Implemented Real-Time Control Technique, For Bifred Converter, Mehdi Ferdowsi, Ali Emadi, Mark Telefus, Anatoly Shteynberg

Electrical and Computer Engineering Faculty Research & Creative Works

Pulse Train^TM, a new control scheme, is presented and applied to a BIFRED converter operating in discontinuous conduction mode (DCM), which avoids the light-load high-voltage stress problem. In contrast to the conventional control techniques, the principal idea of Pulse Train is to regulate the output voltage using a series of high and low energy pulses generated by the current of the inductor. In this paper, applicability of the proposed technique to both the input and magnetizing inductances of BIFRED converter is investigated. Analysis of BIFRED converter operating in DCM as well as the output voltage ripple estimation are …

Configuration For Micro Ph Sensor, Young-Jin Kim, Young-Chul Lee, Byung-Ki Sohn, Chang-Soo Kim, Jung-Hee Lee

Electrical and Computer Engineering Faculty Research & Creative Works

A fully integrated pH sensor with a built-in reference electrode is proposed. An iridium oxide microelectrode and a pH-insensitive field-effect transistor are used as a pH sensor and a reference electrode, respectively. The sensitivity of the proposed device matches well with the estimated value to within 0.3 mV/pH deviation.

Electromagnetic Compatibility Issues In Mobile Computing, Antonio Orlandi, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

M-Ary Amplitude Shift Keying Ofdm System, Fuqin Xiong

Electrical and Computer Engineering Faculty Publications

Coherent M-ary amplitude-shift keying (MASK) is proposed for use in orthogonal frequency-division multiplexing (OFDM) systems. The frequency separation between subcarriers is only 1/2T instead of 1/T. With a slightly wider bandwidth, an √M-ary ASK OFDM can achieve the same bit-error rate (BER) of M-ary quadrature amplitude modulation (QAM) OFDM and a better BER than that of M-ary phase-shift keying (MPSK) OFDM. The √M-ary ASK OFDM has the same peak-to-average-power ratio as that of the M-ary QAM OFDM. The MASK OFDM can be implemented digitally and efficiently by fast cosine transform and demodulated by inverse fast cosine transform. Comparisons show that …

A Computer-Based Articulation Training Aid For Short Words (Cata), Mukund Devarajan

Electrical & Computer Engineering Theses & Dissertations

Several improvements in the vowel articulation training aid (VATA) are described, as well as the efforts to extend the visual feedback system to operate with short words in the form of consonant, vowel and consonant (CVC). The extended version of the visual feedback system is referred to as CATA (Computer-based Articulation Training Aid); the vowel version of the aid (VATA) only operates with ten American English monopthong vowels. Improvements in VATA include the use of a neural network (NN) recognizer method to prune a large database of vowel recordings to eliminate noisy and/or mispronounced tokens. The spectral jitter problem, previously …