Electrical and Computer Engineering Commons^™

Compressed Sensing Techniques For Radial Ultra-Short Echo Time (Ute) Magnetic Resonance Imaging, Xiahan Yang

Masters Theses

"This thesis proposes two techniques, namely Compressed Sensing (CS) and self-gating, for pre-clinical (CMRI) to reduce scan time and RF exposure to mouse heart, simply experimental procedures, and improve imaging quality. The proposed CS technique reduces the number of radial trajectories in Ultra-short Echo Time (UTE) CMRI scans on a 7 Tesla MRI machine to acquire 13% to 38% of the fully sampled k-space data. To reconstruct the image, the Non-Uniform Fast Fourier Transform (NUFFT) is utilized in each iteration of the l1-norm optimization algorithm of the CS to reduce error and aliasing. Experimental results with a phantom and a …

Optimal Techno-Economic Sizing Of Wind/Solar/Battery Hybrid Microgrid System Using The Forever Power Method, Sami Hamed Alalwani

Masters Theses

"Advancement in power electronics, energy storage, control, and renewable energy sources has led to the use of integrated renewable energy sources in islanded microgrids (MG). Also, the uses of integrated renewable energy sources have become more technically applicable, more economically feasible, and more environmentally friendly than conventional sources. As a result, electrification of rural villages using renewable energy technologies has started to become widely adopted around the world. Since generating power from renewable energy sources is highly intermittent and difficult to predict, the use of proper energy storage technology is important to eliminate mismatches between the load demand and generation. …

The Dynamic Behavior Of A Solid State Transformer (Sst) During Recloser Operation In Distribution Systems, Fahd Amin Hariri

Masters Theses

"Electrical power systems are continuously facing increasing electrical power demand in the last years to meet the requirements of modern life style. In order to satisfy such needs electricity authorities are taking appropriate measures to enhance the performance of power networks. One of the solutions to meet the customer's demands for energy was the trend to use the renewable energy. The increasing use of renewable energy and other distributed generation sources made the electrical grid more complex. Many researches have been carried out to find out solutions to overcome this complexity. One of these researches -- which was on a …

Comparative Study Of Three Types Of Inverters Based On The Output Total Harmonic Distortion, Paterrson Thomas

Masters Theses

"In this thesis, three cases of power electronic inverters are taken into consideration to analyze their performance in terms of total harmonic distortion in their output voltage and output current. Firstly, a single H-bridge inverter is simulated. Staircase switching technique is used to generate the gating pulses for the switches. Only one switch is made to toggle for every half cycle. The fundamental harmonic component of the desired output voltage is considered to be 120 V. Secondly, the same topology is used with a Bipolar PWM gating technique. The switching frequency of the carrier wave is 33*60 Hz. Thirdly, a …

The Development Of Near Field Probing Systems For Emc Near Field Visualization And Emi Source Localization, Hui He

Masters Theses

"The objectives of this research are to visualize the frequency dependent electromagnetic field distribution for electromagnetic compatibility (EMC) applications and the radiating source reconstruction on complex shaped electronic systems. This is achieved by combining near field probing with a system for automatically recording the probe position and orientation. Due to the complexity of the shape of the electronic systems of interest, and for utilizing the expertise of the user, the probe will be moved manually not robotically. Concurrently, the local near field will be recorded, associated with the location and displayed at near real time on the captured 3D geometry …

Design And Implementation Of Low Complexity Wake-Up Receiver For Underwater Acoustic Sensor Networks, Ming Yue

Masters Theses

"This thesis designs a low-complexity dual Pseudorandom Noise (PN) scheme for identity (ID) detection and coarse frame synchronization. The two PN sequences for a node are identical and are separated by a specified length of gap which serves as the ID of different sensor nodes. The dual PN sequences are short in length but are capable of combating severe underwater acoustic (UWA) multipath fading channels that exhibit time varying impulse responses up to 100 taps. The receiver ID detection is implemented on a microcontroller MSP430F5529 by calculating the correlation between the two segments of the PN sequence with the specified …

An Improved Planar Cavity Model For Dielectric Characterization, Benjamin Jay Conley

Masters Theses

"Accurate characterization of the dielectric properties of the laminate materials used in printed circuit board fabrication is critical for maximizing the performance of modern high speed circuitry. While many techniques exist for characterizing dielectric materials, most existing techniques are either limited in accuracy or highly impractical for use with planar, copper-clad laminate sheets. A common method involves forming a cavity from the printed circuit board material and calculating the permittivity and dissipation factor from the measured resonant frequencies and quality factor of the cavity. This resonance technique makes the assumption of an ideal cavity, which leads to errors in both …

Emission Source Microscopy Applications On Emi Source Localization And Emi Mitigation With Lossy Materials, Xiangyang Jiao

Masters Theses

"In Section 1, the emission source microscopy (ESM) methodology will be introduced and used to identify the sources of radiation on different DUTs. As the new technology generation, the integration density and the operating speed of integrated circuits have been increasing steadily. However, root cause diagnostics to locate the source of EMI radiation is more problematic in the complex system. The ESM technique provides a powerful tool to detect and characterize the active sources of radiation. The amplitude and phase of fields are measured on a plane away from the DUT, and this measurement can get rid of the evanescent …

Investigation Of Decoupling Capacitor Connection Methods Using Peec And Study Of Alien Crosstalk From A Broadr-Reach® Protocol Based System, Tamar Makharashvili

Masters Theses

"Power Distribution Network (PDN) for Printed Circuit Board (PCB) design requires proper power integrity analysis. In order to deliver a low-ripple DC voltage from a Voltage Regulator Module (VRM) to an Integrated Circuit (IC), a certain target input impedance should be achieved. Developing simple physics-based equivalent circuit models are essential for understanding how a system works and making crucial design decisions. In this work, the input impedance of a decoupling capacitor due to traces, pads and via discontinuities are investigated using the Physics-based Model Size Reduction (PMSR) method. Various decoupling capacitor connection methods are compared and design guidelines are provided …

Detection And Cancellation Of Sinusoidal Fading Power Variation In Wireless Communication Systems, Sushruth Sastry

Masters Theses

"Fading channel estimation in wireless communication systems depends on an expected model for fading and any assumptions made about the channel itself. The bit error rate (BER) performance of the communication system is affected by how closely these assumptions made in designing the estimation technique match the deployment environment. Any unforeseen disturbances or hindrances in the environment deteriorate the BER performance of the system when the estimation system is not designed to combat such disturbances. To deal with such unforeseen obstacles, additional mathematical models can be proposed to model such disturbances and then the estimation techniques can either be reinforced …

A Subband Kalman Filter For Echo Cancellation, Rakesh Vijayakumar

Masters Theses

"This thesis involves the implementation of a Kalman filter for the application of echo cancellation. This particular Kalman filter is implemented in the frequency domain, in subbands, so as to make it faster and of lesser calculational complexity for real time applications. To evaluate the functioning of this subband Kalman filter, comparison of the performance of the subband Kalman filter is done with respect to the original time domain Kalman filter, and also with other subband adaptive filters for echo cancellation such as the NLMS filter. Additionally, since background noise affects the working of any adaptive filter, the newly developed …

Steam Flooding Screening And Eor Prediction By Using Clustering Algorithm And Data Visualization, Na Zhang

Masters Theses

"Enhanced Oil Recovery (EOR) techniques are vitally important in the oil industry because these techniques could not only extend the life of wells, but also produce 10% to 30% additional oil from the reservoir. However, selecting the most suitable EOR techniques for unknown reservoirs is not easy for decision making. Based on literature, EOR screening criteria could help to find the best candidates for unknown projects, which is classified into two categories: conventional EOR screening and advanced EOR screening. In this research, an artificial intelligent (AI) method, hierarchical clustering algorithm, is adapted to analyze both steam flooding projects and worldwide …

Methods For Checking And Enforcing Physical Quality Of Linear Electrical Network Models, Mikhail Zvonkin

Masters Theses

"Most CAD tools allow system-level simulation for signal integrity by computing and connecting models together for the various sub-parts. The success of this model derivation depends on the quality of the network parameters. Different errors may seriously affect the quality of the frequency characterization: frequency-dependent measurement errors, errors due to the numerical simulation and/or discretization, etc. When these errors are large, model assembly and simulation becomes difficult and may even fail. This thesis gives an overview of the most significant properties of physically valid network parameters, describes existing methods for checking and enforcing these properties, and presents several new methodologies …

Analysis And Comparison Of Two High-Gain Interleaved Coupled-Inductor Boost Converters, Venkat Sai Prasad Gouribhatla

Masters Theses

"The main objective of this thesis is to compare and analyze two different high-gain dc-dc power electronic converters based on coupled inductors and capacitor-diode multiplier cells. The idea of these converters is to integrate the solar energy with a 400V DC microgrid. DC microgrids are more efficient, less expensive, and more reliable compared to AC microgrids. They also favor the integration of renewable energy sources. With the growing need for the utilization of more renewable sources of energy, photovoltaic panels have become one of the trending technologies which convert the energy from the sun to a useable electrical power. But …

On-Die Sensors For Transient Events, Mihir Vimal Suchak

Masters Theses

"Failures caused by transient electromagnetic events like Electrostatic Discharge (ESD) are a major concern for embedded systems. The component often failing is an integrated circuit (IC). Determining which IC is affected in a multi-device system is a challenging task. Debugging errors often requires sophisticated lab setups which require intentionally disturbing and probing various parts of the system which might not be easily accessible. Opening the system and adding probes may change its response to the transient event, which further compounds the problem.

On-die transient event sensors were developed that require relatively little area on die, making them inexpensive, they consume …

Mr4rf: Mem-Device With Impedance And Their Usage With Impedance Matching Networks For Passive Rfid Tags In The Uhf, George H. Harris

Masters Theses

"The passive RFID tag in the UHF has been employed in several different applications including, tracking, logistics, and as a sensing platform for the Internet of things (IoT). The tag is ideal for this industry due to its unique design. It harvests all of its energy from the environment, and is small, cheap, and requires little to no maintenance. However, there are two major issues limiting the potential of the passive RFID systems: the limited power harvested by the tag, and the high susceptibility to interference and coupling. In particular, dynamic environments render the traditionally fixed, RF impedance matching network …

Direct Torque Control Of An Lnduction Machine Using Multi-Layer Perceptron Network, Adithya Chandrashekharan

Masters Theses

In conventional direct torque control (DTC) scheme of induction motor (lM), Proportional Integral Controller (PI) is used as the speed controller. PI controller is more suitable in steady state condition and for linear system but both DTC and IM are mostly nonlinear. Multi-Layer perceptron neural network. (MLPNN) controller is more suitable and performs better than PI controller. The switching table of the conventional DTC is replaced by the MLPNN controller. The MLPNN inputs are, the magnitude of the stator flux, torque and the Voltage sectors. Levenberg-Marquardt back propagation technique has been used to train the MLPNN. The output of the …

Improved Accuracy In Real-Time Rfid Localization Systems Using Kalman Filtering, Benjamin J. Sanda

Masters Theses

The use of Radio Frequency Identification (RFID) has become widespread in industry as a means to quickly and wirelessly identify and track packages and equipment. Now there is a commercial interest in using RFID to provide real-time localization. Efforts to use RFID technology for this purpose experience localization errors due to noise and multipath effects inherent to these environments. This paper presents the use of both linear Kalman filters and non-linear Unscented Kalman filters to reduce error effects inherent to real-time RFID localization systems and provide more accurate localization results in indoor environments. A commercial RFID localization system designed for …

Analysis And Modeling Of Resilience For Networked Systems, Kamlesh Ashok Joshi

Masters Theses

"A cyber physical system (CPS) has two main subsystems; a physical infrastructure that is responsible for managing and implementing physical tasks, e.g., generation and distribution of a physical commodity, and a cyber infrastructure that is used to support and enhance these physical operations through computing, communication, and control. Imperfect cyber control can lower the efficacy and even reliability of existing physical infrastructures. As such, justifiable reliance on CPSs requires rigorous investigation of the effect of incorporating cyber infrastructure on functional and non-functional aspects of system performance. One non-functional metric of note is resilience, defined as the ability of a system …

Fair And Optimal Resource Allocation In Wireless Sensor Networks, Vinodhini Ravikumar

Masters Theses

"There is a large amount of research in wireless networks focuses on optimization of either network routing and power control alone. In contrast, this work aims at jointly optimizing the transmission power and routing path selection in order to optimize allocation of resources in interference constrained wireless environment. Moreover, we consider a multipath routing where multiple alternative paths are employed to transmit data between the end nodes. One of modern communication techniques that it applies to a network coding, though not explicitly implemented in this work. The proposed approach is first analyzed theoretically using Lagrangian optimization for a three-node scenario. …

Islanding Technique In Power Systems To Avoid Cascading Failure, Saurabh Sahasrabuddhe

Masters Theses

"In order to increase the reliability of the power system and to make use of trapped generation potential from renewable sources due to lack of transmission availability, the interconnection of modern day power systems is increasing day by day. Lack of timely response to the ramping load and high degree of interconnection can lead to cascading failures. Upon inception, these can spread through the system within seconds and may result in a total system blackout.

Natural calamities and erroneous operations of components are often the causes of system disturbances. The type and the location of these disturbances determine it's impact …

Inorganic Biodegradable Devices For Temporary Implants, Kassan Unda

Masters Theses

"Implantable electronic devices have great potential to benefit many health care technologies. They comprise of two different categories. The first is permanent prosthetic devices like cardiac pacemakers or nerve stimulants. The other category includes temporary devices for interventional medical monitoring and control scenarios, which lose functionality and become unnecessary after their intended operational lifetime. This can cause serious electromagnetic and biomechanical safety concerns if not removed from the body by an additional surgical operation.

This thesis focuses on exploring the feasibility of implantable inorganic bioresorbable thin film resistive devices utilizing bioactive glass as the core structural material. This device will …

Analysis Of Factors Responsible For Life Degradation Of Led Traffic Indicators In The State Of Missouri, Snehal Satish Digraskar

Masters Theses

"Traffic lights using state-of-the-art LED illumination use 90 percent less electricity and offer a much longer service life and durability than their incandescent counterparts. Taking advantage of the countless benefits, cities around the country have been replacing traditional filament-based traffic signal bulbs with LEDs for years. However, the degradation of LEDs and hence the replacement strategy, are a concern which is faced by most of the Departments of Transportation. The thesis work sponsored by MoDOT, presents the replacement strategy developed based on the field study of LED indicators in Missouri. Three types of analysis are performed with multiple data point …

Application Of Electrically Invisible Antennas To The Modulated Scatterer Technique, Dylan Andrew Crocker

Masters Theses

"The Modulated Scatterer Technique (MST) has shown promise for applications in microwave imaging, electric field mapping, and materials characterization. Traditionally, MST scatterers consist of dipole antennas centrally loaded with a lumped element capable of modulation (commonly a PIN diode). By modulating the load element, the signal scattered from the MST scatterer is also modulated. However, due to the small size of such scatterers, it can be difficult to reliably detect the modulated signal. Increasing the modulation depth (a parameter related to how well the scatterer modulates the scattered signal) may improve the detectability of the scattered signal. In an effort …

Hard-Switched Switched Capacitor Converter Design, Lukas Konstantin Müller

Masters Theses

"Switched capacitor (SC) converters are becoming quite popular for use in DC-DC power conversion. The concept of equivalent resistance in SC converters is frequently used to determine the conduction losses due to the load current. A variety of methodologies have been presented in the literature to predict the equivalent resistance in hard-switched SC converters. However, a majority of the methods described are difficult to apply to general SC converter topologies. Additionally, previous works have not considered all nonidealities in their analysis, such as switching losses or stray inductances. This work presents a generalized and easy to use model to determine …

Processing And Feature Analysis Of Atomic Force Microscopy Images, Xiao Pan

Masters Theses

"Atomic force microscopy (AFM) is a versatile and powerful tool for imaging and measuring small-scale objects such as nanoparticles, single molecules, semiconductor devices and living cells. The basic operation of an AFM can be to utilize a sharp cantilever tip that interacts with the sample surface and senses the local force between the tip and sample surface. Based on the physical interaction between the AFM and the small-scale object for image acquisition, there can be a number of artifacts, including curvature distortion (bowing effects), high-frequency or low-frequency noise, which may not be easily recognized by users accustomed to conventional microscopy. …

Improved Phase Shedding Technique In A Multiphase Converter System, Anagha Rayachoti

Masters Theses

"Multiphase converters are increasingly gaining prominence in the field of power electronics. The main advantage of a multiphase converter is its increased efficiency in comparison to a single phase converter. The one major drawback of a multiphase converter is its light load efficiency. Light load efficiency in multiphase converters is very poor when compared to single phase converters. Phase shedding is one of the approaches used to improve this light load efficiency but the transient output voltage response of the system shows large deviations during the process of phase change. This thesis proposes a new technique, called the ramp control …

Emi Investigation And Modeling Of A Flat Panel Display, Satyajeet Shinde

Masters Theses

"It is often important to carry out EMI analysis in the design phase of an electronic product to predict the radiated emissions. An EMI analysis is important to predict if the product complies with the FCC regulations as well as to gain an understanding of the noise coupling and radiation mechanisms. EMI analysis and prediction of radiated emissions in electronic products that have an electrically large chassis, pose a challenge due to the presence of multiple resonant structures and noise-coupling mechanisms.

The study focusses on the investigation of the main noise coupling mechanisms, the approach and methods used for the …

Cervical Cancer Histology Image Feature Extraction And Classification, Peng Guo

Masters Theses

"Cervical cancer, the second most common cancer affecting women worldwide and the most common in developing countries can be cured if detected early and treated. Expert pathologists routinely visually examine histology slides for cervix tissue abnormality assessment. In previous research, an automated, localized, fusion-based approach was investigated for classifying squamous epithelium into Normal, CIN1, CIN2, and CIN3 grades of cervical intraepithelial neoplasia (CIN) based on image analysis of 62 digitized histology images obtained through the National Library of Medicine. In this research, CIN grade assessments from two pathologists are analyzed and are used to facilitate atypical cell concentration feature development …

Microwave Assisted Reconstruction Of Optical Interferograms For Distributed Fiber Optics Sensing & Characterization Of Pcb Dielectric Properties Using Two Striplines On The Same Board, Lei Hua

Masters Theses

"A new concept, the microwave-assisted reconstruction of an optical interferogram for distributed sensing, was developed to resolve both the position and reflectivity of each sensor along an optical fiber. This approach involves sending a microwave-modulated optical signal through cascaded fiber optic interferometers. The optical spectrum of each sensor can be reconstructed by sweeping the optical wavelength and detecting the modulation signal. A series of cascaded fiber optic extrinsic Fabry-Perot interferometric sensors was used to prove the concept. The microwave-reconstructed interferogram matched well with those recorded individually from a traditional optical spectrometer. The application of distributed strain measurement was also investigated. …