Electrical and Computer Engineering Commons^™

Integration And Testing Of A Quadruped Robot With Ros2, Jeremy S. West

Master's Theses

The Cal Poly Legged Robotics Group has been developing research and teaching platforms for agile legged robotics since 2020. These platforms are expected to provide students with opportunities to develop complete legged-robot systems from low-level control to advanced robotics tasks such as motion planning and decision making. However, the current prototyped quadruped robot lacked the software and sensing capabilities for high-level quadrupedal gaits and advanced robotic research.

To address these challenges, this project developed Switch, a robotic platform that builds upon the previous BRUCE platform with significant hardware and software upgrades. Switch features a modular design that allows individual software …

Seconds From Impact: Anticipatory Vehicular Crash Prediction Using Video Vision Transormers, Ryan P. Geisen

Master's Theses

Vehicular collisions represent a significant public health concern, necessitating re search into advanced emergency notification systems. While deep learning has shown promise in accident detection, a research gap persists in applying state-of-the-art transformer architectures to the task of anticipatory, real-time crash prediction from video. This thesis addresses this gap by developing and evaluating a Video Vision Transformer (ViViT) for the binary classification of imminent vehicular collisions. Utilizing a curated dataset of 1,493 unique collision sequences, this study systemati cally investigates the impact of temporal context by comparing the ViViT against a single-frame Vision Transformer (ViT) baseline and conducting comprehensive exper …

Reverse Engineering Bring Up And Profiling Of Multi-Fpga Systems, Henry A. Evans

Master's Theses

FPGAs have long been used for prototyping and verifying high-speed digital designs in industry and in academic research. As ASIC designs have grown in complexity and size, prototyping those designs on FPGAs has required multiple FPGAs that sometimes span multiple servers. Western Digital donated multiple FPGA-based systems to Cal Poly in 2023. These servers contain multiple high-end AMD FPGAs that are ideal for prototyping large high-speed digital designs, however the full documentation on how to use the servers and how the servers work was not provided. The servers did not come with any information on how to program the FPGAs, …

Leveraging Machine-Learning Algorithms In Two Car Crash Detection Systems On A Custom Dataset, Addison Jacob Sandvik

Master's Theses

Traffic accidents pose a significant threat to public safety, causing millions of deaths and injuries worldwide each year. While efforts to reduce accidents have seen limited progress in recent years, improving emergency response times through automated detection systems is a promising avenue for saving lives. This thesis describes the development of machine learning-based traffic accident detection systems, exploring both video classification and image detection models. The models are trained on a new dataset deemed the Cal Poly Traffic Accident Dataset, an extension of the existing Car Accident Detection and Prediction (CADP) dataset with a precise collision annotations. Two systems were …

Nonlinear Integral Control Schemes For A Cadence-Heartrate Process: A Matlab Exploration, Alexander G. Elliott

Master's Theses

Keeping one’s heart-rate within a specific range during a cardiovascular workout can be difficult due to many factors including variations in the exercise environment and changes in energy level. One’s heart-rate can be controlled by tuning the intensity level of the activity over time. This study focuses on the relationship between a runner’s cadence and their heart-rate and explores ways to control the heart-rate by adjusting the cadence. Previous work in this area modeled the cadence-heartrate plant as a first-order linear system, but this has been shown to be insufficient. This work improves upon previous research in this area by …

Study On The Application Of Smart Electric Meters For Secondary Voltage Protection, Jayaditya Sisodia

Master's Theses

The purpose of our research is to utilize PG&E’s Smart Meters installed across California to protect the Secondary Voltage delivered to the meter. This means detecting electrical faults between the utility’s distribution transformer and the installed Smart Meter. Our goal is to propose and implement various solutions through additional devices and protocols to detect and prevent these faults, communicate them with the meter, and forward fault information to the utility. A device will be designed to be installed on the transformer, detect faults, shut off power transmission, and communicate to the meter via fiber optic cable. Research will then be …

Streamlined Intelligence: Resource-Efficient Machine Learning For 5g Nr V2v Channel Equalization, Jacqueline G. Radding

Master's Theses

As autonomous vehicles continue to evolve, reliable and efficient real-time communication between vehicles is essential for safety and performance. This thesis explores Streamlined Intelligence: Resource Efficient machine learning for 5G NR V2V Channel Equalization, focusing on lightweight random forest decision tree models to address the challenges of channel equalization in 5G New Radio (NR) vehicle to vehicle (V2V) systems. Using orthogonal frequency division multiplexing (OFDM) with QPSK modulation, the study simulates data transmission in nonlinear channels characterized by obstructions, Doppler shifts, and fading. Decision trees are proposed as a computationally efficient alternative to other machine learning methods while being compared …

Open Source Asic Design Curriculum, Francisco Wilken

Master's Theses

The ever-growing importance of Application-Specific Integrated Circuits (ASICs) in a high-compute world necessitates that college graduates entering the workforce are well prepared to design them. This thesis details the design of novel ASIC curriculum, using open source tools to teach at the undergraduate level. By moving to a higher level of abstraction than classical transistor-focused coursework, chip design material can be made accessible earlier in an undergraduate degree. Additionally, open source tools provide a powerful, free, and portable platform for students to create their own designs, solving assignments focused on industry readiness. Finally, this thesis studies the results and challenges …

Design, Analysis, And Implementation Of An Improved Zero Voltage Switching Hybrid Voltage Divider, Luke V. Cerda

Master's Theses

This thesis entails the study, design, and construction of a novel DC-DC converter topology, the Zero Voltage Switching Hybrid Voltage Divider (ZVS-HVD), with improved modularization, optimization, and compactness. The ZVS-HVD facilitates higher load currents and accomplishes DC-DC voltage division through switching inductors and capacitors. Low switching loss is achieved through zero voltage switching (ZVS) and the use of GANFET switches. An analysis of duty cycle and high-frequency operation is conducted, enabling 1 MHz switching and improvements in output voltage ripple, voltage drooping, board size, and efficiency at higher load currents. Two versions of ZVS-HVD prototypes were constructed with on-board signal …

Development Of A Versatile Switching Mode Inverter Laboratory Module, Zachariah Lee Mustar

Master's Theses

DC-AC converters, or inverters, are complex devices that play an essential role in photovoltaic, energy storage, and microgrid systems. Therefore, they constitute a class of power electronics that any power-focused electrical engineering student should be familiar with. This thesis presents the development and testing of a single device that power electronics students will use in a laboratory setting to experiment with each of the four different switching techniques employed in inverters: a simple square wave (SSWI), modified square wave (MSWI), bipolar PWM, and unipolar PWM. The module was built with a physically modifiable control stage and a power stage constituting …

Design And Development Of A Half-Bridge Llc Resonant Converter Laboratory Module, Alyssa Lam

Master's Theses

Resonant DC-DC converters have become a well-known solution in power supplies due to their ability to improve efficiency by utilizing soft-switching techniques. This further has caused a growing interest in industry to use these converters for high-switching-frequency, high-efficiency, and high-power applications such as EV charging stations, photovoltaic systems, battery chargers, etc. One particular resonant topology that has gained popularity in recent years is the LLC resonant converter. Due to the prevalent use of the LLC resonant converter, it is therefore crucial for students preparing for a career path in power electronics to become well-versed in the concept and implementation of …

Coherent Synchronization For Distributed Digital Phased Arrays, Zachary C. Numa

Master's Theses

Distributed digital phased arrays are rising technologies that help enable applications such as search and rescue operations, wireless communication, radar navigation, and military operations, among many others. Due to their improved angular resolution, digital phased arrays offer superior direction-finding capabilities compared to traditional analog phased array systems. However, this improvement comes at the cost of increased complexity—specifically, the need for precise synchronization of phase, time, and frequency across physically separated nodes. Without synchronization, the distributed phased array's gain and direction-of-arrival (DoA) estimations deteriorate significantly.

There are multiple aspects to implementing and synchronizing a non-stationary distributed digital phased array. This research …

Open Source Microgrid Integration, Zachary J. Kwast

Master's Theses

Microgrids are small-scale electrical systems that operate in tandem with a centralized grid to provide power to a smaller group of target devices. These microgrids are used for a wide range of different purposes, which invites the need for a generalized model that can be tweaked for a variety of uses. This document goes over the theory used to design an open source AC and DC microgrid meant for use by anyone. The microgrid is created using a Raspberry Pi that controls two different power converters so that a wide range of voltage and current characteristics can be achieved. These …

Analog Hardware Implementation Of A Linearly Constrained Quadratic Program Real-Time Solver, Claire E. Tylutki, Claire Tylutki

Master's Theses

This thesis presents the design, implementation, and analysis of a hardware system for solving Linearly Constrained Quadratic Programs (LCQPs) in real time. The architecture follows a generalized feedback structure composed of three key elements: gradient descent on the quadratic cost function, saturation-based nonlinearity to enforce inequality constraints, and an integral controller with an anti-windup mechanism to regulate dynamic behavior and determine steady-state error. This majority analog system converges with equilibria that satisfy the Karush-Kuhn-Tucker (KKT) optimality conditions. Using a representative LCQP, this work presents simulation of the circuit in PLECS and LT Spice to confirm the feasibility of the novel …

Single-Sideband Pulse Width Modulation For Parametric Acoustic Arrays, Douglas Liu

Master's Theses

Parametric acoustic arrays are directional loudspeakers that operate using ultrasonic carriers to project sound within a narrow beam. Input audio is first modulated onto an ultrasonic carrier and transmitted through air, where it self-demodulates into audible frequencies in the far field.

This thesis introduces a method for preprocessing audio into scaled quadrature signals using a passive analog polyphase filter. These signals are modulated using microcontroller-generated waveforms to create quadrature ultrasonic pulse-width modulation (PWM) signals. The modulated outputs are combined through a wired-OR summer, producing single-sideband ultrasonic content at the desired frequency of 40 kHz. This signal is amplified through high-efficiency …

Modeling Battery Energy Storage Systems To Study The Effects Of Battery Chemistry And Operation On Power Quality, Lin E. Knudsen

Master's Theses

This thesis studies the impacts of battery chemistry (specifically lithium-iron phosphate, sodium-ion, and solid-state), AC voltage, battery size, charging mode, state of charge (SOC), active power draw, and power factor on the power quality of a Battery Energy Storage System (BESS). For harmonic evaluation, the metrics provided by the IEEE Standard 519 are used as a guideline to quantify voltage and current harmonics. A comprehensive MATLAB Simulink using Simscape Electrical is used to develop and simulate the models for the battery, DC-DC converter, AC-DC converter, and the grid. A total of 57 simulation cases varying the BESS factors are performed, …

Modeling And Efficiency Analysis Of Hybrid Ac/Dc And Conventional Ac House Electrical Systems For Net-Zero Energy Homes, Tyler Bury

Master's Theses

This thesis presents the design, simulation, and comparative efficiency analysis of hybrid AC/DC residential homes versus conventional AC homes for Net Zero Energy Homes (NZEH). Motivated by the increasing prevalence of DC-native technologies such as solar photovoltaics, battery storage, and DC-powered electronics, this work evaluates whether hybrid AC/DC distribution can offer measurable efficiency benefits over traditional systems. Twelve detailed house models were developed—six employing a hybrid AC/DC architecture and six based on conventional AC systems, each supplying a combination of AC and DC residential loads. Simulations were conducted using MATLAB/Simulink to model steady-state efficiency under various loading conditions. Grid configurations …

Compact, Low-Power Underwater Acoustic Modem Characterization And Sensing Network Node Implementation, Lucas W. Lucia

Master's Theses

There is a growing market for compact, power-efficient underwater communication technology. Due to the limited propagation of electromagnetic waves through water, modulated acoustic waves have emerged as an effective means of wireless communication underwater. In decades past, many acoustic modems had been developed primarily for defense customers in larger systems functioning at high power. In recent years, smaller, relatively inexpensive acoustic modems have become available on the market—but data on their performance in a real-world environment is scarce. Companies such as OWL Integrations are interested in employing such acoustic modems as part of sensing networks across multiple mediums. For such …

Distributed Formation Control Of Nonholonomic Mobile Robots: Safety-Critical Leader-Follower Approach With Obstacle Avoidance And Dynamic Reconfiguration, Kelvin C. Villago

Master's Theses

Networked control systems for multi-agent robotics have emerged as a critical paradigm for executing complex coordinated tasks in diverse environments. While formation control serves as the backbone of such systems, real-world deployment introduces significant challenges including communication constraints, environmental obstacles, and the need for adaptive reconfiguration. This research addresses these challenges by developing a novel unified framework that seamlessly integrates obstacle avoidance algorithms with dynamic formation reconfiguration capabilities, specifically designed for communication-limited networked control architectures. The proposed framework represents a significant advancement over existing approaches by simultaneously handling both static and dynamic obstacles while maintaining system cohesion under communication constraints. …

Remote Monitoring And Control Of Protection Relays Via Programmable Logic Controller, Rio Mcgown-Kauffman

Master's Theses

The purpose of this study is to explore the ability of a programmable logic controller (PLC) to wirelessly monitor and control power protection relays. The technologies surrounding power protection and industrial automation are ever evolving and have developed significantly in recent history. Industrial power applications call for consistent condition monitoring and status updates for various high-importance components. The high-importance components have power protection schemes that are managed by digital relays to trip circuit breakers in fault or unsafe operating conditions. The smart relays have a wide range of capabilities, including communications. Cal Poly assembled a collection of relays from Schweitzer …

Ev Microgrid Inspired Open-Source Power Inverter, Bryan A. Carrillo Martinez

Master's Theses

The development of open-source power electronics platforms plays an instrumental role in accelerating microgrid deployment, electric vehicle (EV) integration, and educational access to embedded power electronic converters. This thesis presents the design, implementation, and validation of the Atinverter V2, an open-source DC to AC inverter intended for low power EV microgrid applications and educational settings. The Atinverter V2 integrates various hardware and software subsystems centered around the ATMEGA328P microcontroller, enabling PWM-based sinusoidal power inversion, DC/AC voltage and current sensing, and embedded control features. Software development leverages a C++ object-oriented library and multiple Arduino-based modules to facilitate modular and scalable operation. …

Hybrid Computing For Real-Time Model Predictive Control Of A Buck Converter, Grace Paladichuk

Master's Theses

Advancements in power electronics require high switching frequencies which the digital control routines of the systems cannot keep up with. Analog computing is added to digital control systems to prevent bottlenecks and allow real-time implementation. This paper proposes a hybrid computing model predictive control system for a buck converter. The control system implements the gradient dynamics of the optimization function using digital computing, and the gradient dynamics for the penalty function and integrator using analog computing. For the full simulations of the entire system, the PLECS RT Box is used to simulate the controller in real time with a 1 …

Design Of A Novel Low-Cost Hybrid V-Shape Spoke-Type Ferrite Ipm-Synrm For Ev Traction Using Fem Software, Kenghao Cai

Master's Theses

This paper presents a hybrid V-shape spoke type ferrite Interior Permanent Magnet Synchronous Reluctance Machine (PMA-SynRM) for electric vehicle traction application. Ferrite or ceramic IPM-SynRMs compared to Neodymium (NdFeB) based IPM-SynRMs typically have lower torque, power density, and efficiency overall. Motivated by rising costs and international policies making it increasingly more challenging to obtain rare-earth metals, alternatives should be explored. With the help of finite element method (FEM) software, Ansys Maxwell, this study probes into a novel three-phase ferrite-only hybrid Spoke-type V-shaped IPM-SynRM using Tesla Model 3's neodymium powered V-shape interior permanent magnet machine as a benchmark. The proposed motor …

A Heuristic Approach To Portrait Segmentation And Its Application To Synthetic Bokeh Generation, Charles J. Snead

Master's Theses

Segmentation of portrait images is an important technique used to separate the foreground and background of an image. This separation of layers is useful for selectively applying post-processing techniques to enhance the quality of the image, such as blurring the background. Automatic portrait segmentation is a complex process that can be completed with a high degree of accuracy using deep learning with neural networks, but training and inference are often very computationally expensive. This thesis aims to take a heuristic approach to portrait segmentation by combining classical image processing and computer vision techniques into a solution that can be run …

Optimizing And Training An Svm-Based Breast Cancer Tumor Classifier, Kevin Lopatka

Master's Theses

With advancements in technology, turning to machine learning has become a popular choice for aiding clinicians in the diagnoses of breast cancer malignancies. While the neural networking approach has been vetted thoroughly, this work aims to take advantage of traditional machine learning techniques; mainly support vector machine learning and the optimizing of feature extraction. The discrete-wavelet transform is used in the feature extraction stage of machine learning. Previous works that use this feature extraction technique are analyzed and expanded upon by utilizing a variety of different wavelets as well as other color-spaces with the goal of achieving higher result metrics …

Enhanced Post-Capture Automatic White Balance For Srgb Images, Eric Huang

Master's Theses

Automatic white balancing (AWB) aims to correct color casts caused by varying illumination conditions, typically assuming access to RAW sensor data. However, many real-world applications involve only sRGB images that have already been processed by in-camera pipelines. In these cases, traditional AWB algorithms often underperform due to the nonlinear transformations done by these pipelines.

This thesis builds upon a data-driven color correction framework introduced by Afifi et al. that relies on RGB-UV histograms and learned color transforms. A revised automatic white balancing (AWB) framework that improves both color accuracy and runtime efficiency is proposed. A fallback routine is implemented to …

Modeling And Analysis Of A Hybrid Ac/Dc Green Seaport Power System With Photovoltaic Generation And Battery Energy Storage Systems, Corey Zaas

Master's Theses

This thesis investigates the modeling, simulation, and analysis of a Green Seaport power system integrating photovoltaic (PV) generation, battery energy storage systems (BESS), and coordinated protection within a hybrid AC/DC framework. The work improves a previously established model, enhancing it with detailed protection studies and simultaneous AC/DC power flow analysis using EasyPower software. The system was evaluated under a wide range of operating conditions, including varying solar irradiance, battery charge and discharge states, and both full and zero load conditions. Key performance indicators included voltage regulation, power factor behavior, equipment loading, protection device coordination, and total system power losses. Simulation …

Novel Approach To Traveling-Wave-Based Fault Location In Nonhomogeneous Transmission Lines, John Parker Burrell

Master's Theses

Accurate fault location is a critical aspect of power system protection, ensuring grid reliability and minimizing downtime. Traditional traveling-wave-based fault location methods face limitations when applied to nonhomogeneous transmission lines due to the reliance on precise segment velocities and propagation time data. This thesis addresses these challenges by proposing a novel algorithm that leverages historical fault data to estimate segment velocities and refine these estimates as more faults occur. The algorithm was rigorously tested using the digital model of an 11-segment, 65.694 km real overhead transmission line and validated using both simulations and hardware tests using commercially available time-domain protective …

Risc-V Gpu Acceleration On Low-Cost Embedded Systems, Fadi M. Alzammar

Master's Theses

The Vortex project from Georgia Institute of Technology was created to provide an open-source hardware and software GPGPU research platform based on RISC-V. Skybox was introduced as an extension to Vortex to provide dedicated support for 3D graphics rendering acceleration as a complete GPU platform. This work presents contributions to the render output unit of Skybox, including the development of a blend unit, cache bypassing mechanisms, and performance monitoring metrics. With these, Skybox has succeeded in its goal of accelerating graphics rendering on RISC-V platforms. This work also establishes a foundation for adapting Vortex to low-cost embedded platforms such as …

Performance Of Neural Networks On Fpga For Embedded Devices Using Hls4ml Framework, Alam N. Romo Lopez

Master's Theses

As machine learning models such as neural networks are investigated for their applications across many fields, the demand for models that can be implemented on an embedded device grows. Field Programmable Gate Arrays (FPGAs) have become an attractive option for implementing these models in hardware. This thesis considers the viability of FPGA implementations for machine learning on low-resourced embedded systems. The hls4ml project is a promising prospect for machine learning on FPGA devices. To test hls4ml, we used a model trained on the MNIST digits dataset, which was then synthesized for the PYNQ-Z2 device. We fine tuned the performance by …