Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal of Electrochemistry

Articles 1171 - 1200 of 1274

Full-Text Articles in Electrical and Computer Engineering

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu May 1999

Preparation And Application Of Gold-Film On The Surface Of Bacterial-Modified Carbon Paste Electrode, Rong-Zong Hu, Yan-Ping Ruan, Hao Xu, Jin-Kun Fu, Wei-De Zhang, Wen-Yun Hu

Journal of Electrochemistry

A novel method for preparation of gold-film composed of ultra-fine gold particles was reported in this paper. The gold-film was prepared by electrochemical method on the surface of the paste electrode modified with the strain Bacillus sp. D01 which has strong ability to absorb and reduce Au3+. In addition, this paper reported an experimental method of determining trace amount of Cu2+ in water solution using cathodic stripping analysis to estimate the performances of the obtained gold-film. The experimental results indicated that this new method for preparation of gold-film is simple. The obtained gold-film electrode is stable and …

Go to article

Zro2 And Zro2-Y2O3 Coatings Deposited By High Energy Pulse, Wei-Ping Yu, Ye-Dong He, Li-Na Zhang, De-Ren Wang May 1999

Zro2 And Zro2-Y2O3 Coatings Deposited By High Energy Pulse, Wei-Ping Yu, Ye-Dong He, Li-Na Zhang, De-Ren Wang

Journal of Electrochemistry

The basic rule and influence factors on deposition of ZrO2 and ZrO2-Y2O3 coatings by high energy pulse were studied. After the oxidizing experiment in air at 1 000 for 100 h, it was shown that the oxidation resistance of 18-8 stainless steel was marketly enhanced by depositing ZrO2 and ZrO2-Y2O3 coatings. The oxidation resistance was increased about 20 times and the oxide scale spallation resistance was increased about 100 times.

Go to article

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi Feb 1999

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi

Journal of Electrochemistry

Separating the functions of current collection and gas flow distribution and then to design two separate elements to achieve the desired performance characteristics, a nonconventional cell structure for proton exchange membrane fuel cells bave been developed. The current collector is achieved using a thin stain steel sheet, the gas flow distribution is achieved using a carbon paper that has the desired chemical durabiliy when in contact with the proton exchange membrane. Combining these two separate elements into a single divice yields a bifunctional device that performs as a bipolar separator plate. The advantages of this alternative appproach to making biplar …

Go to article

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan Feb 1999

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A reaction kinetic study for electrochemical oxidation of benzene was performed on a PbO2 rotating disk electrode in 1 mol/L H2SO4 aqueous solution. The reaction orders, the activation energies and transfer coefficient were measured, and the kinetic expression was obtained.

Go to article

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang Feb 1999

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang

Journal of Electrochemistry

There exist two oxidation current peaks on the anodic polarization curve between -0.7 V and 0 V (SCE) in Na-hypophosphite solution. Peak Ⅰ (-0.55 V, SCE) , which represents the oxidation process from H2PO2- to H2PO3-, has been studied previously. Peak Ⅱ, which is located at the potential about -0.4 V (SCE), is investigated emphatically in this paper. The results show that, peak Ⅰ and Ⅱ are corresponding to two successive steps in oxidation process of H2PO2-, i.e. peak Ⅱ corresponds to the oxidation process of …

Go to article

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji Feb 1999

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji

Journal of Electrochemistry

A new polymer E-T was synthesized and used as a corrosion inhibitor for reinforced concrete. The inhibitive behavior and mechanism were studied with linear polarization, Tafel polarization, EIS and XPS method in simulated pore solution system with concrete samples. The result showed that the polymer was a mixing type inhibitor. A 1% dosage was sufficient to imhibit the corrosion of steel in simulated pore solution system. The salt endurance was enhanced from 0.02 mol/L to 0.10 mol/L. The result also showed the good synergetic effect of NaNO2, especially in low NaNO2 concentration. The EIS showed that E-T …

Go to article

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song Feb 1999

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song

Journal of Electrochemistry

The surface of the spherical nickel hydroxide particles used as an active material in pasted nickel electrodes is surface-deposited with cobalt. This paper investigated the effects of the amount of cobalt deposit on the characteristics of nickel hydroxide electrode. The performances of the electrode, such as discharge capacity, utilization of active material and reversibility of Ni(OH)2/NiOOH redox reaction, were studied by comparing the charging/discharging curves and cyclic voltammograms. The mechanism of action of cobalt deposits has been described in terms of the electrochemical impedance spectroscopy of nickel hydroxide electrode.

Go to article

Structural And Electrochemical Studies On Todorokite/Vernadite As Cathodes For Rechargeable Lithium Ion Batteries, Wei Chu, De-Yao Liu, Jin-Kua You, Yong Yang, Zu-Geng Lin Feb 1999

Structural And Electrochemical Studies On Todorokite/Vernadite As Cathodes For Rechargeable Lithium Ion Batteries, Wei Chu, De-Yao Liu, Jin-Kua You, Yong Yang, Zu-Geng Lin

Journal of Electrochemistry

XRD, TEM, ICP, low scan-rate CV and charge/discharge tests were carried out for the studies on the structural and electrochemical behavior of a prepared 3 V manganese oxide cathode for rechargeable lithium ion batteries.XRD analysis revealed that the cathode sample is mainly composed of tunneled Todorokite and layered Vernadite. TEM investigation confirmed that the morphology of the sample is a laminated construction with approximate 10nm layer space. The reversibility of Li+ removal/intercalation and structural stability of this sample framework to lithium insertion are good in CV and charge/discharge tests. The discharge capacities were found to be about 129mAh/g obtained …

Go to article

Primary Research Of Reversible Proton Exchange Membrane Regenerative Fuel Cells, Zhi-Gang Shao, Bao-Lian Yi, Ming Han Nov 1998

Primary Research Of Reversible Proton Exchange Membrane Regenerative Fuel Cells, Zhi-Gang Shao, Bao-Lian Yi, Ming Han

Journal of Electrochemistry

In this paper, we report the results of our studies on regenerative proton exchange membrane fuel cell (RPEMRFC) catalysts, electrode preparation and their performances. The Pt catalyst for the oxygen electrode was replaced by 60 w%Pt + 40 w%IrO2 which reduces polarization by 0.2 V in a polymer protone exchange membrane fuel cell. The cycle performance of RPEMRFC was found to be manly effected by the stability of the diffiusion layer of bifunctional oxygen electrode.

Go to article

The Latest World Wide Progress In Solid Oxide Fuel Cell, Yi Jiang Nov 1998

The Latest World Wide Progress In Solid Oxide Fuel Cell, Yi Jiang

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a novel, green electricity generation technology, which has been showing rapid development since 1980's. In light of its high efficiency, environmental friendly, fuel adaptability and long term stability, the Research, Development and Demonstration (RD&D) of this hype of full cell have been emphasized in a large number of developed countries. Based on the information communicated at the latest symposium on SOFC held last year in Aachen (Germany) and the knowledge gained through years of research in this field, a comprehensive review on the latest development of the tubular, this planar SOFC as well as …

Go to article

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai Nov 1998

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai

Journal of Electrochemistry

An amorphous lithium inserting anode material based on Tin oxide glass was synthesized by salification in solution and its properties on lithium intercalation was investigated by X ray diffraction (XRD), microelectrode voltammetry and charge discharge measurements. The results have shown that this kind of material has considerable electrochemical reversibility toward lithium intercalation deintercalation. The available discharge capacity of the material reaches 430 mAh/g with charge-discharge efficiency over 90%, showing a great potential for practical use.

Go to article

Direct Electro-Oxidation Synthesis Of D-Arabinose On Spectroscopic Graphite Electrode, Hei Wei, Huang Ying Nov 1998

Direct Electro-Oxidation Synthesis Of D-Arabinose On Spectroscopic Graphite Electrode, Hei Wei, Huang Ying

Journal of Electrochemistry

D Arabinose synthesized by direct electro-oxidative decarboxylation of D gluconate on graphite electrode from aqueous solutions. The effects of D gluconate concentration, electrolysis potential, temperature and electrolyte composition on the current efficiency and product yield of electrosynthsis are discussed. The laboratory scale electrosynthesis was achieved with flow through cell. The optimum technology conditions for electrosynthesis were obtained with orthogonal design method. Both galvanostatic and potentionstatic conditions have been exploited, the later was found to be more effective.

Go to article

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen Nov 1998

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen

Journal of Electrochemistry

Synthesis of butyl butyrate by direct electroxidation of n butyl alcohol and the electrochemical behaviors of several selected conducting oxide electrodes (Pb/PbO2, Ti/PbO2, i/SnO2+Sb2O3/PbO2 and Ti/SnO2+Sb2O3+PdOx/PbO2) have been investigated. The results demonstrated that the intermediate layers of SnO2, Sb2O3 and PdOx could significantly decrease the interfacial resistance of the electrodes, and that the Ti/SnO2+Sb2O3+PdOx/PbO2 electrode possessed better electrocatelytic performance than others.

Go to article

Studies Of Spinal Li(1+X)Mn(2-X)O4 Rechargeable Lithium Ion Battery, Xiao-Mei Wu, Qing-He Yang, Zhong-Kao Jin, Hao-Qing Wu, Xiang-Fu Zong Nov 1998

Studies Of Spinal Li(1+X)Mn(2-X)O4 Rechargeable Lithium Ion Battery, Xiao-Mei Wu, Qing-He Yang, Zhong-Kao Jin, Hao-Qing Wu, Xiang-Fu Zong

Journal of Electrochemistry

The spinel Li intercalation compound Li1+xMn2-xO4 (0< x <1) was prepared by using techniques of cyclic voltammetry. The electrochemical parameters of Li1+xMn2-xO4 electrode vary as either the starting materials or the synthesis temperature changes. It was found that the initial capacity and reversible behaviors of the Li1+xMn2-xO4 electrode depends on the amount of the excess Li, represented as x in Li1+xMn2-xO4. The reversible of Li intercalation process for Li1+xMn2-xO4 electrode was demonstrate by cyclic voltammograms.

Go to article

Direct Electrochemical Reaction Of Cytochrome C At The Poly (Ethylene Oxide) Film Modified Gold Electrodes, Xiao-Gang Qu, Gong-Quan Sun, Hui Yang, Tian-Hong Lu Aug 1998

Direct Electrochemical Reaction Of Cytochrome C At The Poly (Ethylene Oxide) Film Modified Gold Electrodes, Xiao-Gang Qu, Gong-Quan Sun, Hui Yang, Tian-Hong Lu

Journal of Electrochemistry

In this paper, the direct electrochemical reaction of cytochrome c was sudied at the poly (ethylene oxide) film modified gold electrodes. It was found the PEO is a good promoter for the electrochemical reaction of cytochrome c, and the reversibility of reaction of cytochrome c was found to depend on the molecular weight of PEO and the morphology of the PEO films.

Go to article

Modification Of Carbon Anode Materials Of Lithium-Ion Secondary Battery, Yuping Wu, Chun-Rong Wan, Chang-Yin Jiang, Jiang-Iun Li Aug 1998

Modification Of Carbon Anode Materials Of Lithium-Ion Secondary Battery, Yuping Wu, Chun-Rong Wan, Chang-Yin Jiang, Jiang-Iun Li

Journal of Electrochemistry

In this paper, the latest research work on modification of carbon anode materials of lithium ion secondary battery is reviewed. Modification methods include: incorporation of nonmetal elements such as boron, silicon, nitrogen, phosphorus and sulfur, metal elements such as potassium, aluminum, gallium and transitional metal elements such as vanadium, nickel, cobalt, copper and iron and surface treatment such as oxidation and formation of surface layer. Since these methods can affect the carbon materials' electronics state, crystal structure and surface structure, the electrochemical properties of the carbon materials could probably be improved. Besides, mechanisms for lithium storage in carbonaceous materials are …

Go to article

Lithiun Insertion In Carbon Nanotubes, Guo-Tao Wu, Chun-Sheng Wang, Zhong-Fu Qi, Wenz-Hu Li Aug 1998

Lithiun Insertion In Carbon Nanotubes, Guo-Tao Wu, Chun-Sheng Wang, Zhong-Fu Qi, Wenz-Hu Li

Journal of Electrochemistry

Carbon nanotubes were produced by chemical vapour deposition(CVD) of acetylene under hydrogen gas.The reversible specific capacity of carbon nanotubes is up to 700 mAh/g, much higher than the theoretical specific capacity of graphite(372 mAh/g).After twenty charge/discharge cycles,the discharge capacity of carbon nanotube anode still maintains 65.3% of its original discharge capacity . Besides, the charge/discharge efficiency of carbon nanotube in the first charge/discharge cycle was found to improve from 42.6% up to 55.9% by coating carbon nanotubes with copper.

Go to article

External Transducing Measurement Of The Internal Pressure In Sealed Battery By Resistance Strain Gauge, Han-Xi Yang, Rong-Hui Hu, Xin-Ping Ai, Cong-Zhi Yang, Sheng-Xian Li Aug 1998

External Transducing Measurement Of The Internal Pressure In Sealed Battery By Resistance Strain Gauge, Han-Xi Yang, Rong-Hui Hu, Xin-Ping Ai, Cong-Zhi Yang, Sheng-Xian Li

Journal of Electrochemistry

A novel method to monitor dynamically the internal pressure of sealed battery with no damage of the battery by using of resistance strain measurement technique is presented. This technique employs the resistence strain gauges in touch of the battery case and to detect the minimal change in the battery deformation due to the increasing internal pressure, electrode expantion or intrenal temperature rise. Application of the technique for the study of the effects of the battery processing factors on the battery performance is described taking Ni MH battery as example.

Go to article

Photoelectrochemical Studies On Nanoporous Tio2/Pan Film Electrode, Min-Sheng Liu, Yan-Zhong Hao, Xue-Bin Qiao, Mai-Zhi Yang, Sheng-Min Cai Aug 1998

Photoelectrochemical Studies On Nanoporous Tio2/Pan Film Electrode, Min-Sheng Liu, Yan-Zhong Hao, Xue-Bin Qiao, Mai-Zhi Yang, Sheng-Min Cai

Journal of Electrochemistry

The photon to electricity conversion process of nanoporous TiO2/PAn film electrode was studied in electrolytes with and without redox couple by using the photocurrent action spectra and potential dependence of photocurrent. It is concluded that the nanoporous TiO2/PAn film electrode has a structure of duplex n type semiconductor layers. The band gap of PAn film is 2.88eV.The TiO2 nanoporous film electrode modified by PAn can extend the range of optical absorption into visible and infrared region and effectively increase the photocurrent in the visible and infrared region. The photocurrent threshold shifts to>600nm and conversion …

Go to article

Studies On The Electrode Kinetics Of Electrooxidation Of Mn2+, Wan-Li Hu, Tong Su, Wei Guo, Ding Zhou Aug 1998

Studies On The Electrode Kinetics Of Electrooxidation Of Mn2+, Wan-Li Hu, Tong Su, Wei Guo, Ding Zhou

Journal of Electrochemistry

The mechanism of electrooxidation of MnSO4 on Pb Sb As alloy anode was investigated by using rotating disc electrode technique. The results shown that the conditional standard potential of Mn(Ⅲ)/Mn(Ⅱ)in 40% H2SO4 is 0.886 4 V.The rate controlling step of electrode process is mixed controlled by charge transfer and diffusion.

Go to article

Study Of Proton Exchange Membrane Fuel Cells(Pemfc), Shan-Hai Ge, Bao-Lian Yi, Hong-Fen Xu, Ming Han, Zhi-Gang Shao Aug 1998

Study Of Proton Exchange Membrane Fuel Cells(Pemfc), Shan-Hai Ge, Bao-Lian Yi, Hong-Fen Xu, Ming Han, Zhi-Gang Shao

Journal of Electrochemistry

The electrode kinetic parameters for proton exchange membrane fuel cells(PEMFC) were investigated by measuring the relations of cell potential and current density. An experimental stack of PEMFC which can be operated at E cell =0.7V, I =0.55A/cm2 steadily is presented, and the effects of electrode structure and operation conditions such as temperature, pressure, humidification, flow rate on the performance of PEMFC are discussed.

Go to article

Electrooxidation Of Benzene To Benzoquinone In A Packed Bed Reactor, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan Aug 1998

Electrooxidation Of Benzene To Benzoquinone In A Packed Bed Reactor, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A packed electrode reactor was used to oxidize to benzoquinone. Anode bed of the reactor has a size of 10～30 mm×450 mm×50 mm(thickness×length×width),and was packed porous lead alloy. A dispersion of benzene in 1 mol/L aqueous sulfuric acid was passed through the reactor. Current efficiency for benzoquinone generation is 62.9% at optimal operating condition: velocity of electrolyte flow, 0.19 ms -1 ;current, 10 A; thickness of anode bed, 10 mm, and percentage of benzene, 24%.

Go to article

Electrochemical Preparation Of Rare Earth Functional Materials And Application Of Rare Earth To Electrochemistry, Qi-Qin Yang, Tong-Xiang Ye May 1998

Electrochemical Preparation Of Rare Earth Functional Materials And Application Of Rare Earth To Electrochemistry, Qi-Qin Yang, Tong-Xiang Ye

Journal of Electrochemistry

The new progress and related mechanism of the electrochemical preparation of rare earth materials (magnets, magnetooptic materials, battery materials, luminescent devices, semiconductors, superconductors) and the application of rare earth to the electrochemical areas (e.g. electroplating, corrosion, electrosynthses) have introduced.

Go to article

Studies Of Surface Alloy As High Efficient Electrocatalyst For Glyoxylic Acid Synthesis, Sheng-Pei Chen, Sheng-Qing Xia, Shi-Gang Sun May 1998

Studies Of Surface Alloy As High Efficient Electrocatalyst For Glyoxylic Acid Synthesis, Sheng-Pei Chen, Sheng-Qing Xia, Shi-Gang Sun

Journal of Electrochemistry

/

Go to article

In-Situ Raman Spectroscopic Study Of The Oxidation And Reduction Of Ag Electrode In Na2So4, Yan-Xia Chen, Kai-Qi Huang, Zhong-Qun Tian May 1998

In-Situ Raman Spectroscopic Study Of The Oxidation And Reduction Of Ag Electrode In Na2So4, Yan-Xia Chen, Kai-Qi Huang, Zhong-Qun Tian

Journal of Electrochemistry

In-situ Raman spectroscopy combined with cyclic voltammogram measurements was used to investigate formation of oxygen species at Ag electrode surfaces during the oxidation and reduction process in 0.1 mol/L Na2SO4 solution. The time dependent Raman spectra show that at potentials positive of 0.2 V, adsorption of oxygen atom occurs, while at the potentials positive of 0.4 V, some oxygen atoms migrate into subsurface of the Ag electrode and the other form strongly bound oxygen on the surface through chemical bond. At the same potentials, part of the silver atoms are oxidized and form Ag2SO4 …

Go to article

Studies On The Transport Properties Of Zn2+ In The Zn/V2O5 Secondary Battery With Aqueous Medium, Jia-Hong Zhou, Kuan-Hong Xue, Gu-Ping Pan May 1998

Studies On The Transport Properties Of Zn2+ In The Zn/V2O5 Secondary Battery With Aqueous Medium, Jia-Hong Zhou, Kuan-Hong Xue, Gu-Ping Pan

Journal of Electrochemistry

The transport properties and the reaction mechanism of Zn2+ in the cathode material of Zn/V2O5 secondary battery with aqueous medium were studied by use of intermittent titration experiments and X-Ray diffraction analysis. The relations of some kinetic parameters to the discharge depth were discussed. The results of the experiments show that the cathodic discharge reaction is an intercalation process.

Go to article

Electrode Process Of Lithium Ions On Aluminum Electrode In Molten Licl-Kcl, Shu-Zhen Duan, Cong-Sheng Guan, Qing-Rong Shi, Xin-Dong Wang May 1998

Electrode Process Of Lithium Ions On Aluminum Electrode In Molten Licl-Kcl, Shu-Zhen Duan, Cong-Sheng Guan, Qing-Rong Shi, Xin-Dong Wang

Journal of Electrochemistry

The Deposition mechanism of Lithium on aluminium electrode was studied by using linear sweep voltammetry and potential step method. The formation of α-solid solution was controlled by the diffusion of lithium within the aluminium substance. The formation of β-LiAl alloy was limited by the rate of forming the alloy at the legining, and by diffiusion of lithium through the β- LiAl alloy layer was limited by the rate of forming the alloy at the begining, and by the diffusion of lithium through the β-LiAl alloy later. Neucleation polarization for the formation of β-LiAl alloy was observed. This polarization is an …

Go to article

New Esr-Electrochemical Cell Designs For Coaxial Microwave Cavity, Lin Zhuang, Jun-Tao Lu May 1998

New Esr-Electrochemical Cell Designs For Coaxial Microwave Cavity, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

New cell designs for simultaneous electrochemical (EC) and electron spin resonance (ESR) measurements are reported for coaxial microwave cavity. Adjustable shieldings are introduced so that the working electrode can be much shorter than the full height of the cavity. Besides the traditional helical electrode, the working electrode can be cylinders made from metal plates, metallic meshes or even composite materials. The counter electrode can be placed either inside or outside the cavity. These features make the new designs more flexible than that previously reported. With a nonperforated cylindrical electrode, this cell can be used to determine the standard potential and …

Go to article

Studies Of Surface Electrochemistry And Electrocatalysis At Atomic And Molecule Level, Shigang Sun Feb 1998

Studies Of Surface Electrochemistry And Electrocatalysis At Atomic And Molecule Level, Shigang Sun

Journal of Electrochemistry

The main progresses achieved during last few years in our research group concerning studies of surface electrochemistry and electrocatalysis were reviewed in this present paper. Four topics were described: 1) the surface electrochemistry and model electrocatalysis of metal single crystal planes, 2) the electrocatalytic reaction mechanism and the control of reaction pathways at molecule level, 3) the reaction kinetics of electrooxidation of small organic molecules, and 4) the relationship between the properties and the surface chemical states of electrocatalyst. This review lays in emphasis on the demonstration of the results as well as the research direction of surface electrochemistry and …

Go to article

A Preliminary Study On Thin Film Plasticizing Lithium Ion Battery, Quanfeng Dong, Hanxi Yang, Xinping Ai, Xiaohong Hu, Shengxian Li Feb 1998

A Preliminary Study On Thin Film Plasticizing Lithium Ion Battery, Quanfeng Dong, Hanxi Yang, Xinping Ai, Xiaohong Hu, Shengxian Li

Journal of Electrochemistry

A dry polymer electrolyte was made by plasticizing a copolymer matrix and further filling with liquid electrolyte. A thin-film lithium ion battery based on the dry polymer electrolyte was manufactured and its electrochemical properties were measured. It is found that the thin film lithium ion battery exhibits similar discharge properties to liquid electrolyte battery, and shows strong high rate capability.

Go to article

First Prev Next Last