Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electronic Theses and Dissertations

Discipline
Institution
Keyword
Publication Year

Articles 1141 - 1170 of 1175

Full-Text Articles in Electrical and Computer Engineering

Gauss-Newton Based Learning For Fully Recurrent Neural Networks, Aniket Arun Vartak Jan 2004

Gauss-Newton Based Learning For Fully Recurrent Neural Networks, Aniket Arun Vartak

Electronic Theses and Dissertations

The thesis discusses a novel off-line and on-line learning approach for Fully Recurrent Neural Networks (FRNNs). The most popular algorithm for training FRNNs, the Real Time Recurrent Learning (RTRL) algorithm, employs the gradient descent technique for finding the optimum weight vectors in the recurrent neural network. Within the framework of the research presented, a new off-line and on-line variation of RTRL is presented, that is based on the Gauss-Newton method. The method itself is an approximate Newton's method tailored to the specific optimization problem, (non-linear least squares), which aims to speed up the process of FRNN training. The new approach …

Go to article

Analysis Of Time Synchronization Errors In High Data Rate Ultrawideban, Lakesha Bates Jan 2004

Analysis Of Time Synchronization Errors In High Data Rate Ultrawideban, Lakesha Bates

Electronic Theses and Dissertations

Emerging Ultra Wideband (UWB) Orthogonal Frequency Division Multiplexing (OFDM) systems hold the promise of delivering wireless data at high speeds, exceeding hundreds of megabits per second over typical distances of 10 meters or less. The purpose of this Thesis is to estimate the timing accuracies required with such systems in order to achieve Bit Error Rates (BER) of the order of magnitude of 10-12 and thereby avoid overloading the correction of irreducible errors due to misaligned timing errors to a small absolute number of bits in error in real-time relative to a data rate of hundreds of megabits per second. …

Go to article

Design And Implementation Of A Digital Controller With Dsp For Half-Br, Yangyang Wen Jan 2004

Design And Implementation Of A Digital Controller With Dsp For Half-Br, Yangyang Wen

Electronic Theses and Dissertations

DC-DC power converters play an important role in powering telecom and computing systems. With the speed improvement and cost reduction of digital control, digital controller is becoming a trend for DC-DC converters in addition to existed digital monitoring and management technology. In this thesis, digital control is investigated for DC-DC converters applications. To deeply understand the whole control systems, DC-DC converter models are investigated based on averaged state-space modeling. Considering half-bridge isolated DC-DC converter with a current doublers rectifier has advantages over other topologies especially in the application of low-voltage and high-current DC-DC converters, the thesis take it as an …

Go to article

Globally-Asynchronous, Locally-Synchronous Wrapper Configurations For, Akarsh Ravi Jan 2004

Globally-Asynchronous, Locally-Synchronous Wrapper Configurations For, Akarsh Ravi

Electronic Theses and Dissertations

Globally-Asynchronous, Locally-Synchronous (GALS) design techniques employ the finer points of synchronous and asynchronous design methods to eliminate problems arising due to clock distribution, power dissipation, and large area over head. With the recent rise in the demand for System-on-a-Chip (SoC) designs, global clock distribution and power dissipation due to clock distribution are inevitable. In order to reduce/eliminate the effects of the global clock in synchronous designs and large area overhead in asynchronous designs, an alternative approach would be to utilize GALS design techniques. Not only do GALS designs eliminate the issue of using a global clock, they also have smaller …

Go to article

Circuit Design And Reliability Of A Cmos Receiver, Hong Yang Jan 2004

Circuit Design And Reliability Of A Cmos Receiver, Hong Yang

Electronic Theses and Dissertations

This dissertation explores CMOS RF design and reliability for portable wireless receivers. The objective behind this research is to achieve an increase in integration level, and gain more understanding for RF reliability. The fields covered include device, circuit and system. What is under investigation is a multi-band multi-mode receiver with GSM, DCS-1800 and CDMA compatibility. To my understanding, GSM and CDMA dual-mode mobile phones are progressively investigated in industries, and few commercial products are available. The receiver adopts direct conversion architecture. Some improved circuit design methods are proposed, for example, for low noise amplifier (LNA). Except for band filters, local …

Go to article

Forecasting The Onset Of Cloud-Ground Lightning Using S-Pol And Nldn Data, Kartik Ramakrishnan Jan 2004

Forecasting The Onset Of Cloud-Ground Lightning Using S-Pol And Nldn Data, Kartik Ramakrishnan

Electronic Theses and Dissertations

The maximum number of thunderstorms in the United States occur in Central Florida. The cloud-ground lightning from these storms is responsible for extensive damage to life and property. The lightning from these storms is also responsible for delays and cancellations of space shuttle launch attempts at the Kennedy Space Center (KSC) and the 45th Space Wing unmanned launches at Cape Canaveral launch facilities. For these and other reasons accurate forecasting of cloud-ground lightning is of crucial importance. The second phase of NASA's Tropical Rainfall Measuring Mission Texas and Florida Underflights project (TEFLUN-B) was conducted between 1st August and 30th September, …

Go to article

Evaluation Of The Photo-Induced Structural Mechanisms In Chalcogenide, Cedric Lopez Jan 2004

Evaluation Of The Photo-Induced Structural Mechanisms In Chalcogenide, Cedric Lopez

Electronic Theses and Dissertations

Chalcogenide glasses and their use in a wide range of optical, electronic and memory applications, has created a need for a more thorough understanding of material property variation as a function of composition and in geometries representative of actual devices. This study evaluates compositional dependencies and photo-induced structural mechanisms in As-S-Se chalcogenide glasses. An effective fabrication method for the reproducible processing of bulk chalcogenide materials has been demonstrated and an array of tools developed, for the systematic characterization of the resulting material's physical and optical properties. The influence of compositional variation on the physical properties of 13 glasses within the …

Go to article

Sub-Optimal Ultra-Wide Band Receivers, Nilesh Bhuvanendran Jan 2004

Sub-Optimal Ultra-Wide Band Receivers, Nilesh Bhuvanendran

Electronic Theses and Dissertations

Ultra-wide Band (UWB) has sparked a lot of interest lately from the industry and academia. The growing capacity of the wireless industry is requires a new communication system that satisfies the high data rate which does not interfere with existing RF systems. UWB promises to be this new technology. UWB also promises low power, low cost and flexibility. The UWB Channel opens up a huge new wireless channel with Giga Hertz Capacities as well as the highest spatial capacities measured in bits per hertz per square meter. When properly implemented UWB channel can share spectrum with traditional radio systems without …

Go to article

Monolithic Integration Of Dual Optical Elements On High Power Semicond, Laurent Vaissie Jan 2004

Monolithic Integration Of Dual Optical Elements On High Power Semicond, Laurent Vaissie

Electronic Theses and Dissertations

This dissertation investigates the monolithic integration of dual optical elements on high power semiconductor lasers for emission around 980nm wavelength. In the proposed configuration, light is coupled out of the AlGaAs/GaAs waveguide by a low reflectivity grating coupler towards the substrate where a second monolithic optical element is integrated to improve the device performance or functionality. A fabrication process based on electron beam lithography and plasma etching was developed to control the grating coupler duty cycle and shape. The near-field intensity profile outcoupled by the grating is modeled using a combination of finite-difference time domain (FDTD) analysis of the nonuniform …

Go to article

General Interference Suppression Technique For Diversity Wireless Rece, Tianyu Yang Jan 2004

General Interference Suppression Technique For Diversity Wireless Rece, Tianyu Yang

Electronic Theses and Dissertations

The area of wireless transceiver design is becoming increasingly important due to the rapid growth of wireless communications market as well as diversified design specifications. Research efforts in this area concentrates on schemes that are capable of increasing the system capacity, providing reconfigurability/reprogrammability and reducing the hardware complexity. Emerging topics related to these goals include Software Defined Radio, Multiple-Input-Multiple-Output (MIMO) Systems, Code Division Multiple Access, Ultra-Wideband Systems, etc. This research adopts space diversity and statistical signal processing for digital interference suppression in wireless receivers. The technique simplifies the analog front-end by eliminating the anti-aliasing filters and relaxing the requirements for …

Go to article

Modified Sierpinski Fractal Antenna, Tripti Luintel Jan 2004

Modified Sierpinski Fractal Antenna, Tripti Luintel

Electronic Theses and Dissertations

Fractal antennas have the potential to provide multi-band solution through the property of self similarity that the fractal shape possess. This thesis deals with some modifications of the original Sierpinski fractal patch antenna, providing additional parameters to optimize in order to get the required radiation characteristics. A systematic study of the original Sierpinski monopole was done to gain an insight on the operation and multi-band behavior of the antenna and a similar study was done to find out why the patch version of Sierpinski lacks multi-band behavior. A Sierpinski antenna is designed by merging a grid and the fractal restoring …

Go to article

Evaluation Of A Microwave Radiative Transfer Model For Calculating Sat, Simonetta Thompson Jan 2004

Evaluation Of A Microwave Radiative Transfer Model For Calculating Sat, Simonetta Thompson

Electronic Theses and Dissertations

Remote sensing is the process of gathering and analyzing information about the earth's ocean, land and atmosphere using electromagnetic "wireless" techniques. Mathematical models, known as Radiative Transfer Models (RTM), are developed to calculate the observed radiance (brightness temperature) seen by the remote sensor. The RTM calculated brightness temperature is a function of fourteen environmental parameters, including atmospheric profiles of temperature, pressure and moisture, sea surface temperature, and cloud liquid water. Input parameters to the RTM model include data from NOAA Centers for Environmental Prediction (NCEP), Reynolds weekly Sea Surface Temperature and National Ocean Data Center (NODC) WOA98 Ocean Salinity and …

Go to article

Thermal Management, Beam Control,And Packaging Designs For High Power, Te-Yuan Chung Jan 2004

Thermal Management, Beam Control,And Packaging Designs For High Power, Te-Yuan Chung

Electronic Theses and Dissertations

Several novel techniques for controlling, managing and utilizing high power diode lasers are described. Low pressure water spray cooling for a high heat flux system is developed and proven to be an ideal cooling method for high power diode laser arrays. In order to enable better thermal and optical performance of diode laser arrays, a new and simple optical element, the beam control prism, is invented. It provides the ability to accomplish beam shaping and beam tilting at the same time. Several low thermal resistance diode packaging designs using beam control prisms are proposed, studied and produced. Two pump cavity …

Go to article

Minimization Of Power Dissipation In Digital Circuits Using Pipelining And A Study Of Clock Gating Technique, Ranganath Panchangam Jan 2004

Minimization Of Power Dissipation In Digital Circuits Using Pipelining And A Study Of Clock Gating Technique, Ranganath Panchangam

Electronic Theses and Dissertations

Power dissipation is one of the major design issues of digital circuits. The power dissipated by a circuit affects its speed and performance. Multiplier is one of the most commonly used circuits in the digital devices. There are various types of multipliers available depending upon the application in which they are used. In the present thesis report, the importance of power dissipation in today's digital technology is discussed and the various types and sources of power dissipation have been elaborated. Different types of multipliers have been designed which vary in their structure and amount of power dissipation. The concept of …

Go to article

Autonomous Environmental Mapping In Multi-Agent Uav Systems, Linus Jan Luotsinen Jan 2004

Autonomous Environmental Mapping In Multi-Agent Uav Systems, Linus Jan Luotsinen

Electronic Theses and Dissertations

UAV units are by many researchers and aviation specialists considered the future and cutting edge of modern flight technology. This thesis discusses methods for efficient autonomous environmental mapping in a multi-agent domain. An algorithm that emphasizes on team work by sharing the agents local map information and exploration intentions is presented as a solution to the mapping problem. General theories on how to model and implement rational autonomous behaviour for UAV agents are presented. Three different human and tactical behaviour modeling techniques are evaluated. The author found the CxBR paradigm to be the most interesting approach. Also, in order to …

Go to article

Cryptarray A Scalable And Reconfigurable Architecture For Cryptographic Applications, Michael John Lomonaco Jan 2004

Cryptarray A Scalable And Reconfigurable Architecture For Cryptographic Applications, Michael John Lomonaco

Electronic Theses and Dissertations

Cryptography is increasingly viewed as a critical technology to fulfill the requirements of security and authentication for information exchange between Internet applications. However, software implementations of cryptographic applications are unable to support the quality of service from a bandwidth perspective required by most Internet applications. As a result, various hardware implementations, from Application-Specific Integrated Circuits (ASICs), Field-Programmable Gate Arrays (FPGAs), to programmable processors, were proposed to improve this inadequate quality of service. Although these implementations provide performances that are considered better than those produced by software implementations, they still fall short of addressing the bandwidth requirements of most cryptographic applications …

Go to article

Multiple Scattering Of Light In Inhomogeneous Media And Applications, Claudia Mujat Jan 2004

Multiple Scattering Of Light In Inhomogeneous Media And Applications, Claudia Mujat

Electronic Theses and Dissertations

Light scattering-based techniques are being developed for non-invasive diagnostics of inhomogeneous media in various fields, such as medicine, biology, and material characterization. However, as most media of interest are highly scattering and have a complex structure, it is difficult to obtain a full analytical solution of the scattering problem without introducing approximations and assumptions about the properties of the system under consideration. Moreover, most of the previous studies deal with idealized scattering situations, rarely encountered in practice. This dissertation provides new analytical, numerical, and experimental solutions to describe subtle effects introduced by the properties of the light sources, and by …

Go to article

Optimal Upfc Control And Operations For Power Systems, Xiaohe Wu Jan 2004

Optimal Upfc Control And Operations For Power Systems, Xiaohe Wu

Electronic Theses and Dissertations

The content of this dissertation consists of three parts. In the first part, optimal control strategies are developed for Unified Power Flow Controller (UPFC) following the clearance of fault conditions. UPFC is one of the most versatile Flexible AC Transmission devices (FACTs) that have been implemented thus far. The optimal control scheme is composed of two parts. The first is an optimal stabilization control, which is an open-loop ‘Bang’ type of control. The second is an suboptimal damping control, which consists of segments of ‘Bang’ type control with switching functions the same as those of a corresponding approximate linear system. …

Go to article

Evolving Models From Observed Human Performance, Hans Karl Gustav Fernlund Jan 2004

Evolving Models From Observed Human Performance, Hans Karl Gustav Fernlund

Electronic Theses and Dissertations

To create a realistic environment, many simulations require simulated agents with human behavior patterns. Manually creating such agents with realistic behavior is often a tedious and time-consuming task. This dissertation describes a new approach that automatically builds human behavior models for simulated agents by observing human performance. The research described in this dissertation synergistically combines Context-Based Reasoning, a paradigm especially developed to model tactical human performance within simulated agents, with Genetic Programming, a machine learning algorithm to construct the behavior knowledge in accordance to the paradigm. This synergistic combination of well-documented AI methodologies has resulted in a new algorithm that …

Go to article

Analysis And Modeling Of The Eds Maglev System Based On The Halbach Permanent Magnet Array, Qinghua Han Jan 2004

Analysis And Modeling Of The Eds Maglev System Based On The Halbach Permanent Magnet Array, Qinghua Han

Electronic Theses and Dissertations

Electro-dynamic suspension (EDS) Magnetic levitation (Maglev) with its advantage in maintenance, safety, efficiency, speed, and noise is regarded as a leading candidate for the next generation transportation / space launch assist system. The Halbach array due to its unique magnetic field feature has been widely used in various applications. The EDS system using Halbach arrays leads to the potential EDS system without super-conductor (SC) technology. In this thesis, the Halbach array magnetic field and the dynamics of a novel Halbach array EDS Maglev system were considered. The practical Halbach array magnetic field was analyzed using both a Fourier series approach …

Go to article

Basic Study Of Micromachined Dep (Dielectrophoretic) Manipulator, Vivek Sundaram Jan 2004

Basic Study Of Micromachined Dep (Dielectrophoretic) Manipulator, Vivek Sundaram

Electronic Theses and Dissertations

The capability of manipulating microparticle in small volumes is fundamental to many biological and medical applications, including separation and detection of cells. The development of microtools for effective sample handling and separation in such volumes is still a challenge. DEP (dielectrophoresis) is one of the most widely used methods in handling the microparticles. In this thesis we show that forces generated by nonuniform electric field (DEP) can be used for trapping and separating the microparticles (latex beads). This work further explores the DEP force based on different electrode geometries and medium conductivity. A micromanipulator for latex bead separation was designed, …

Go to article

Fpga-Based Design Of A Maximum-Power-Point Tracking System For Space A, Todd Persen Jan 2004

Fpga-Based Design Of A Maximum-Power-Point Tracking System For Space A, Todd Persen

Electronic Theses and Dissertations

Satellites need a source of power throughout their missions to help them remain operational for several years. The power supplies of these satellites, provided primarily by solar arrays, must have high efficiencies and low weights in order to meet stringent design constraints. Power conversion from these arrays is required to provide robust and reliable conversion which performs optimally in varying conditions of peak power, solar flux, and occlusion conditions. Since the role of these arrays is to deliver power, one of the principle factors in achieving maximum power output from an array is tracking and holding its maximum-power point. This …

Go to article

Low Power Cmos Circuit Design And Reliability Analysis For Wireless Me, Md Anwar Sadat Jan 2004

Low Power Cmos Circuit Design And Reliability Analysis For Wireless Me, Md Anwar Sadat

Electronic Theses and Dissertations

A sensor node 'AccuMicroMotion' is proposed that has the ability to detect motion in 6 degrees of freedom for the application of physiological activity monitoring. It is expected to be light weight, low power, small and cheap. The sensor node may collect and transmit 3 axes of acceleration and 3 axes of angular rotation signals from MEMS transducers wirelessly to a nearby base station while attached to or implanted in human body. This dissertation proposes a wireless electronic system-on-a-single-chip to implement the sensor in a traditional CMOS process. The system is low power and may operate 50 hours from a …

Go to article

Hybrid And Hierarchical Image Registration Techniques, Dongjiang Xu Jan 2004

Hybrid And Hierarchical Image Registration Techniques, Dongjiang Xu

Electronic Theses and Dissertations

A large number of image registration techniques have been developed for various types of sensors and applications, with the aim to improve the accuracy, computational complexity, generality, and robustness. They can be broadly classified into two categories: intensity-based and feature-based methods. The primary drawback of the intensity-based approaches is that it may fail unless the two images are misaligned by a moderate difference in scale, rotation, and translation. In addition, intensity-based methods lack the robustness in the presence of non-spatial distortions due to different imaging conditions between images. In this dissertation, the image registration is formulated as a two-stage hybrid …

Go to article

Polarimetric Characterization Of Random Electromagnetic Beams And Applications, Mircea Mujat Jan 2004

Polarimetric Characterization Of Random Electromagnetic Beams And Applications, Mircea Mujat

Electronic Theses and Dissertations

Polarimetry is one of the principal means of investigating the interaction of light with matter. Theoretical models and experimental techniques are presented in this dissertation for polarimetric characterization of random electromagnetic beams and of signatures of random media in different scattering regimes and configurations. The degree of polarization rather than the full description of the state of polarization is of interest in multiple scattering and free space propagation where the statistical nature and not the deterministic component of light bears the relevant information. A new interferometric technique for determining the degree of polarization by measuring the intensity fluctuations in a …

Go to article

Quadratic Spatial Soliton Interactions, Ladislav Jankovic Jan 2004

Quadratic Spatial Soliton Interactions, Ladislav Jankovic

Electronic Theses and Dissertations

Quadratic spatial soliton interactions were investigated in this Dissertation. The first part deals with characterizing the principal features of multi-soliton generation and soliton self-reflection. The second deals with two beam processes leading to soliton interactions and collisions. These subjects were investigated both theoretically and experimentally. The experiments were performed by using potassium niobate (KNBO3) and periodically poled potassium titanyl phosphate (KTP) crystals. These particular crystals were desirable for these experiments because of their large nonlinear coefficients and, more importantly, because the experiments could be performed under non-critical-phase-matching (NCPM) conditions. The single soliton generation measurements, performed on KNBO3 by launching the …

Go to article

Stable Spatial Solitons In Semiconductor Optical Amplifiers, Erdem Ultanir Jan 2004

Stable Spatial Solitons In Semiconductor Optical Amplifiers, Erdem Ultanir

Electronic Theses and Dissertations

A spatial soliton is a shape invariant self guided beam of light or a self induced waveguide. Spatial solitons appear as a result of the balance of diffraction and nonlinear focusing in a system. They have been observed in many different conservative media in the last couple of years. Solitons are ubiquitous, because of the probability of using their interactions in optical data processing, communications etc. Up to now due to the power required to generate the solitons, and the response times of the soliton supporting media, these special waves of nature could not penetrate the applications arena. Semiconductors, with …

Go to article

Dispersion-Managed Breathing-Mode Semiconductor Mode-Locked Ring Laser, Bojan Resan Jan 2004

Dispersion-Managed Breathing-Mode Semiconductor Mode-Locked Ring Laser, Bojan Resan

Electronic Theses and Dissertations

A novel dispersion-managed breathing-mode semiconductor mode-locked ring laser is developed. The "breathing-mode" designation derives from the fact that intracavity pulses are alternately stretched and compressed as they circulate around the ring resonator. The pulses are stretched before entering the semiconductor gain medium to minimize the detrimental strong integrating self-phase modulation and to enable efficient pulse amplification. Subsequently compressed pulses facilitate bleaching the semiconductor saturable absorber. The intracavity pulse compression ratio is higher than 50. Down chirping when compared to up chirping allows broader mode-locked spectra and shorter pulse generation owing to temporal and spectral semiconductor gain dynamics. Pulses as short …

Go to article

Towards Direct Writing Of 3-D Photonic Circuits Using Ultrafast Lasers, Arnaud Zoubir Jan 2004

Towards Direct Writing Of 3-D Photonic Circuits Using Ultrafast Lasers, Arnaud Zoubir

Electronic Theses and Dissertations

The advent of ultrafast lasers has enabled micromachining schemes that cannot be achieved by other current techniques. Laser direct writing has emerged as one of the possible routes for fabrication of optical waveguides in transparent materials. In this thesis, the advantages and limitations of this technique are explored. Two extended-cavity ultrafast lasers were built and characterized as the laser sources for this study, with improved performance over existing systems. Waveguides are fabricated in oxide glass, chalcogenide glass, and polymers, these being the three major classes of materials for the telecommunication industry. Standard waveguide metrology is performed on the fabricated waveguides, …

Go to article

Design And Applications Of A Graphics Package For The Hp1000 Computer., Hsiao-Chih George Lee May 1986

Design And Applications Of A Graphics Package For The Hp1000 Computer., Hsiao-Chih George Lee

Electronic Theses and Dissertations

The objective of this thesis is to develop the FORTRAN subroutine PLOTER which is a general-purpose plotting tool to plot charts on a Hewlett Packard plotter. The programs RESP and INVLAP which can plot the frequency and time responses of system functions are modified to adopt the PLOTER subroutine and are stored of the HP1000-A900 minicomputer whose software, the GRAPHICS/1000, supports the graphics ability of PLOTER. This thesis describes the theories, functions, software techniques and operations of the PLOTER subroutine and the application programs RESP and the INVLAP. It also provides program listings and example plots.

Go to article

First Prev Next Last