Electrical and Computer Engineering Commons^™

An Emi Characterization And Modeling Study For Consumer Electronics And Integrated Circuits, Chunyu Wu

Doctoral Dissertations

“As internet-of-things (IoT) applications surge, wireless connectivity becomes an essential part of the network. Smart home, one of the most promising application scenarios of IoT, will improve our life quality enormously. However, electromagnetic interference (EMI) to the receiving antenna, either from another electronic product or from a module/an integrated circuit(IC) inside the same wireless device, will degrade the performance of wireless connectivity, thus influencing the user experience. Characterization and modeling of the EMI become increasingly important.

In the first part, an improved method to extract equivalent dipoles from magnitude- only electromagnetic-field data based on the genetic algorithm and back-and-forth iteration …

Multi-Physics-Based Approach To Active Microwave Thermography, Seyed Ali Mirala

Doctoral Dissertations

“The goal of this work is to advance a novel nondestructive testing (NDT) method for controlled, rapid, and effective inspection of a structure through the integration of microwave NDT and thermography, referred to as Active Microwave Thermography (AMT). In AMT, the structure under test is exposed to microwave radiation and the thermal profile of the structure is monitored via a thermal camera in order to obtain desired information regarding the structure. This new technique is applicable across a wide range of NDT needs including detection of voids, delamination, water ingress, debonding, and cracks in numerous structures such as carbon fiber …

Mesh Networking And Full-Duplex Communication For Wireless Networks, Arul Mathi Maran Chandran

Doctoral Dissertations

“Connectivity with large coverage area; and an increase in spectral efficiency of communications are highly desired features for any wireless network. The presented research work addresses these two feature improvements. First, the work analyzed mesh networks to enhance connectivity for wireless networks. The work analyzed both homogeneous and heterogeneous mesh networks. The work includes the development of an Android application to enable smartphones with multiple interfaces, such as Wi-Fi, Bluetooth, and cellular services, to become convergence devices. These convergence devices are then used to build a heterogeneous mesh network improving connectivity and coverage area. Second, the work explored full-duplex communications, …

Accurate Modeling Techniques For Power Delivery, Jingdong Sun

Doctoral Dissertations

“Power delivery is essential in electronic systems to provide reliable power from voltage sources to load devices. Driven by the ambitious user demands and technology evolutions, the power delivery design is posed serious challenges. In this work, we focus on modeling two types of power delivery paths: the power distribution network (PDN) and the wireless power transfer (WPT) system.

For the modeling of PDN, a novel pattern-based analytical method is proposed for PCB-level PDN impedance calculations, which constructs an equivalent circuit with one-to-one correspondences to the PCB’s physical structure. A practical modeling methodology is also introduced to optimize the PDN …

Advanced Control Methods On Three-Phase Inverters In Distributed Energy Resources, Sara Yazdani

Doctoral Dissertations

“This research is an endeavor to apply new and well-established control methodologies to improve transient response, stability and reliability of three-phase inverters in grid-connected and isolated mode of operation. In the course of studying the effect of these methodologies, model-based control is introduced and is extensively applied which is relatively a new approach. In addition, the application of this concept has been studied on developing “grid-forming” controls to allow wind and solar inverters to support voltage and frequency levels like traditional generators.

This research encloses the details of three major works of this research and their possible contributions on improving …

Improved Attenuation And Crosstalk Modeling Techniques For High-Speed Channels, Shaohui Yong

Doctoral Dissertations

”As digital systems are moving in the direction of faster data transmission rate and higher density of circuits, the problem of the far-end crosstalk (FEXT) and frequency-dependent attenuation are becoming the major factors that limit signal integrity performance. This research is focusing on providing several more comprehensive and accurate modeling approaches for striplines on fabricated printed circuit board (PCB). By characterizing the dielectric permittivity of prepreg and core, dielectric loss tangent, and copper foil surface roughness using measurement data, a better agreement between the stripline model and measurement is achieved. First, a method is proposed to extract dielectric loss tangent …

System Efficient Esd Design Concept For Soft Failures, Giorgi Maghlakelidze

Doctoral Dissertations

"This research covers the topic of developing a systematic methodology of studying electrostatic discharge (ESD)-induced soft failures. ESD-induced soft failures (SF) are non-destructive disruptions of the functionality of an electronic system. The soft failure robustness of a USB3 Gen 1 interface is investigated, modeled, and improved. The injection is performed directly using transmission line pulser (TLP) with varying: pulse width, amplitude, polarity. Characterization provides data for failure thresholds and a SPICE circuit model that describes the transient voltage and current at the victim. Using the injected current, the likelihood of a SF is predicted. ESD protection by transient voltage suppressor …

Analysis And Modeling Of Power Supply Induced Jitter For High Speed Driver And Low Dropout Voltage Regulator, Yin Sun

Doctoral Dissertations

”With the scaling of power supply voltage levels and improving trans-conductance of drivers, the sensitivity of drivers to power supply induced delays has increased. The power supply induced jitter (PSIJ) has become one of the major concerns for high-speed system. In this work, the PSIJ analysis and modeling method are proposed for high speed drivers and the system with on-die low dropout (LDO) voltage regulator. In addition, a jitter-aware target impedance concept is proposed for power distribution network (PDN) design to correlate the PSIJ with PDN parasitic.

The proposed PSIJ analysis model is based on the driver power supply rejection …

Design And Fabrication Of Field-Effect Iii-V Schottky Junction Solar Cells, Amirhossein Ghods

Doctoral Dissertations

“A new concept of field-effect photovoltaic devices with a focus on design and fabrication of single and multi-junction solar cells using III-V materials has been shown and proved. Schottky solar cells based on metal-(insulator)-semiconductor (M-I-S) structure have been designed and fabricated using various wide bandgap semiconductors, such as GaAs and Al_0.3Ga_0.7As. A secondary bias layer has been introduced to the device structure, in which it creates additional band bending and subsequently depletion region at the flat band regions on the top surface of the device. It should be mentioned that the bias layer is designed to …

Investigation Of Wide Bandgap Semiconductors For Room Temperature Spintronic, And Photovoltaic Applications, Vishal Saravade

Doctoral Dissertations

"Suitability of wide bandgap semiconductors for room temperature (RT) spintronic, and photovoltaic applications is investigated.

Spin properties of metal-organic chemical vapor deposition (MOCVD) – grown gadolinium-doped gallium nitride (GaGdN) are studied and underlying mechanism is identified. GaGdN exhibits Anomalous Hall Effect at room temperature if it contains oxygen or carbon atoms but shows Ordinary Hall Effect in their absence. The mechanism for spin and ferromagnetism in GaGdN is a combination of intrinsic, metallic conduction, and carrier-hopping mechanisms, and is activated by oxygen or carbon centers at interstitial or similar sites. A carrier-related mechanism in MOCVD-grown GaGdN at room temperature makes …

Strengthening Qc Relaxations Of Optimal Power Flow Problems By Exploiting Various Coordinate Changes, Mohammad Rasoul Narimani

Doctoral Dissertations

"Motivated by the potential for improvements in electric power system economics, this dissertation studies the AC optimal power flow (AC OPF) problem. An AC OPF problem optimizes a specified objective function subject to constraints imposed by both the non-linear power flow equations and engineering limits. The difficulty of an AC OPF problem is strongly connected to its feasible space's characteristics. This dissertation first investigates causes of nonconvexities in AC OPF problems. Understanding typical causes of nonconvexities is helpful for improving AC OPF solution methodologies.

This dissertation next focuses on solution methods for AC OPF problems that are based on convex …

System Si/Pi Modeling And Analysis, Biyao Zhao

Doctoral Dissertations

"A physics-based circuit modeling methodology for 3D IC/packages is proposed here. The method is based on partial element equivalent circuit (PEEC) and layered Green's function (LGF). The LGFs are calculated from discrete complex image method (DCIM) with three terms, direct coupling, complex images, and surface wave, extracted to analyze the wave behavior. The dominate terms for LGFs are analyzed for four stack-ups in 3D IC/packages. Analytical formulas that include the contribution of complex images are proposed for partial capacitance calculation, with the complex image extracted from LGFs. A chip PDN geometry is used to illustrate the use of LGF in …

Frequency Selective Surface-Based Sensing: Theory And Applications, Mahboobeh Mahmoodi

Doctoral Dissertations

"Frequency selective surfaces (FSS) are periodic arrays of resonant elements with a specific (resonant) reflection/transmission response when illuminated by electromagnetic energy. FSSs have been utilized for different applications such as spatial filters, reflectors, lenses, radomes, and more recently, as sensors. FSS-based sensors have shown potential for numerous applications in structural health monitoring such as crack detection, concurrent strain and temperature sensing, normal and shear strain sensing, inspection of layered structures, etc. As FSS-based sensing is largely undeveloped, there are many critical aspects that must be fully understood before this sensing approach can be fully utilized. Therefore, the goal of this …

A Multicarrier Technique For Monte Carlo Simulation Of Electrothermal Transport In Nanoelectronics, Tyler J. Spence

Doctoral Dissertations

The field of microelectronics plays an important role in many areas of engineering and science, being ubiquitous in aerospace, industrial manufacturing, biotechnology, and many other fields. Today, many micro- and nanoscale electronic devices are integrated into one package. e capacity to simulate new devices accurately is critical to the engineering design process, as device engineers use simulations to predict performance characteristics and identify potential issues before fabrication. A problem of particular interest is the simulation of devices which exhibit exotic behaviors due to non-equilibrium thermodynamics and thermal effects such as self-heating. Frequently, it is desirable to predict the level of …

Smart Control Architecture For Microgrid Application, Vikram Roy Chowdhury

Doctoral Dissertations

"This research proposes non-linear control architectures dedicated towards improving transient response, reliability and computational burden for grid connected inverters applicable for ac micro-grids. Also this work proposes an optimization procedure applied to a small microgrid to reduce the billing cost for power incorporating battery degradation mechanism.

Three works are discussed in this research that discusses methodologies to improve the operation of a three phase grid connected inverters. The first work discusses a globally stable estimation architecture for estimating the plant parameters for a grid connected inverter during its operation. Then a Lyapunov based control architecture is utilized and online parameter …

2x-Thru, 1x-Reflection, And Thru-Line De-Embedding: Theory, Sensitivity Analysis, And Error Corrections, Bichen Chen

Doctoral Dissertations

"Due to the simplicity of design and measurement, as well as the accuracy of results, the 2X-Thru de-embedding (2XTD), 1X-Reflection de-embedding (1XRD), and Thru-Line de-embedding (TLD) have been replaced the traditional de-embedding algorithms, such as TRL and SOLT. In this dissertation, theory of 2ⁿ-port 2XTD, 1XRD, and TLD are completely derived first. The self-error reduction schemes is introduced to mitigate the de-embedding errors due to non-ideal manufacturing effects of non-zero mode conversion terms, as well as the asymmetric, and manufacturing variations. The validations are performed on both theory and self-error reduction through simulation and measurements cases. The 2X-Thru …

Passive Harmonic Generation At Spring Contacts, Sen Yang

Doctoral Dissertations

"In the first paper, the RF passive harmonic generation phenomenon on the spring contact is studied. A spring contact harmonic generation measurement system is developed. The factors that may have an impact on the spring contact harmonic generation, such as contact material, contact force, and contact resistance are characterized by the measurement system. The gold-to-gold contact is found to be much superior to the stainless-steel contacts. It is also found that the passive nonlinearity at the spring contact is the semiconductor-like junction formed by the surface oxide film.

In the second paper, we show that the maximum E-field coupling occurs …

Non-Invasive Microwave And Millimeter Wave Reflectometry And Imaging For Human Skin Diagnosis And Materials Characterization, Yuan Gao

Doctoral Dissertations

"Microwave and millimeter wave reflectometry and synthetic aperture radar (SAR) imaging techniques have been successfully applied in many applications, such as nondestructive testing and evaluation (NDT&E), security inspection and medical diagnosis. In this dissertation, the feasibility of using microwave and millimeter reflectometry and SAR imaging for burn diagnosis is investigated through both simulations and measurements, with promising results. To correctly model the interaction between electromagnetic waves and skin, the proper knowledge of the complex permittivity of healthy skin is critically important. To this end, the common used measurement methods for in vivo skin complex permittivity are reviewed and analyzed in …

The Tabu Ant Colony Optimizer And Its Application In An Energy Market, David Donald Haynes

Doctoral Dissertations

"A new ant colony optimizer, the 'tabu ant colony optimizer' (TabuACO) is introduced, tested, and applied to a contemporary problem. The TabuACO uses both attractive and repulsive pheromones to speed convergence to a solution. The dual pheromone TabuACO is benchmarked against several other solvers using the traveling salesman problem (TSP), the quadratic assignment problem (QAP), and the Steiner tree problem. In tree-shaped puzzles, the dual pheromone TabuACO was able to demonstrate a significant improvement in performance over a conventional ACO. As the amount of connectedness in the network increased, the dual pheromone TabuACO offered less improvement in performance over the …

Ferrite Characterization Techniques & Particle Simulations For Semiconductor Devices, Nicholas Erickson

Doctoral Dissertations

"This dissertation is divided into three papers, covering two major topics. The first topic, techniques for ferrite characterization, is discussed over the course of two papers. The second topic, particle simulations for semiconductor devices, is discussed in the last paper. In the first paper, the method for extracting permeability from ferrite materials is discussed for the Keysight 16454A permeability extraction fixture, where the ferrite material to be characterized is assumed to be homogeneous. Then the method is updated to account for layered materials. The updated method is verified through full-wave simulations. In the second paper, a planar printed circuit board …

Hardware Architectures For Compact Microwave And Millimeter Wave Cameras, Matthew Jared Horst

Doctoral Dissertations

"Millimeter wave SAR imaging has shown promise as an inspection tool for human skin for characterizing burns and skin cancers. However, the current state-of-the-art in microwave camera technology is not yet suited for developing a millimeter wave camera for human skin inspection. Consequently, the objective of this dissertation has been to build the necessary foundation of research to achieve such a millimeter wave camera. First, frequency uncertainty in signals generated by a practical microwave source, which is prone to drift in output frequency, was studied to determine its effect on SAR-generated images. A direct relationship was found between the level …

Underwater Acoustic Communications And Adaptive Signal Processing, Mohammadhossein Behgam

Doctoral Dissertations

"This dissertation proposes three new algorithms for underwater acoustic wireless communications. One is a new tail-biting circular MAP decoder for full tail-biting convolution (FTBC) codes for very short data blocks intended for Internet of Underwater Things (IoUT). The proposed algorithm was evaluated by ocean experiments and computer simulations on both Physical (PHY) and Media access control (MAC) layers. The ocean experimental results show that without channel equalization, the full tail-biting convolution (FTBC) codes with short packet lengths not only can perform similarly to zero-tailing convolution (ZTC) codes in terms of bit error rate (BER) in the PHY layer. Computer simulation …

Efficient Estimation And Mitigation For Radio-Frequency Interference, Qiaolei Huang

Doctoral Dissertations

"With rapid innovations in Internet of Things (IoT) and wireless technology, more and more consumer electronic devices around the world are now connected to the internet. In a small form factor electronic device, there are plenty of potential noise sources such as System On Chip (SoC), high speed traces, flexible cables and power converters, etc. Those noise sources can possibly introduce radio frequency interference (RFI) issues. In this dissertation, a transfer function based calculation method is proposed to estimate radio frequency interference (RFI) problems. The derived equations can clearly decompose the RFI problem into two parts: the noise source and …

Design And Prototyping Of A Real-Time Millimeter Wave Imaging System, Zahra Manzoor

Doctoral Dissertations

"The goal of this work is to design, prototype and test an innovative millimeter wave imaging system that operates in the frequency range of 33-35 GHz and is capable of producing rapid images of various diverse scenes. In particular, the imaging system includes two main sections, one is related to the hardware design of the system, and the other focuses on the development of a novel comprehensive image reconstruction algorithm. The hardware design includes custom transmitter and receiver sub-systems, and a sparse switched array which was optimized for 320 mm x 220 mm aperture plane, and also included an improved …

Characterization And Modeling Of Esd Events And Near-Field Scanning Calibration Structures, Shubhankar Kashinath Marathe

Doctoral Dissertations

"This research is divided into three papers that cover, two major topics. The first topic, system-level electrostatic discharge (ESD), is discussed over the course of two papers. The second topic, a calibration structure for near-field scanning probe calibration application, is discussed in the last paper. In the first paper, software-assisted detection methods are proposed for secondary ESD discharges. The measured waveforms are analyzed with respect to waveform parameters, such as the vertical threshold of the rising edge, the derivative of the current waveform, and total charge delivered. These parameters enable automatic detection of secondary ESD while monitoring the discharge waveform …

Deep Neural Network Learning-Based Classifier Design For Big-Data Analytics, Krishnan Raghavan

Doctoral Dissertations

"In this digital age, big-data sets are commonly found in the field of healthcare, manufacturing and others where sustainable analysis is necessary to create useful information. Big-data sets are often characterized by high-dimensionality and massive sample size. High dimensionality refers to the presence of unwanted dimensions in the data where challenges such as noise, spurious correlation and incidental endogeneity are observed. Massive sample size, on the other hand, introduces the problem of heterogeneity because complex and unstructured data types must analyzed. To mitigate the impact of these challenges while considering the application of classification, a two step analysis approach is …

Modeling Strategies For Estimating And Suppressing Electromagnetic Interference And Improving Power Integrity, Tamar Makharashvili

Doctoral Dissertations

"Decoupling capacitors are used to suppress high-frequency noise in power distribution networks. The inductance associated with a mounted decoupling capacitor can vary by 26% depending on characteristics of the printed circuit board. Here, simple and accurate inductance models of 2- and 8-terminal capacitors including connections to the power and return plane are developed. Circuit models of the capacitors and layout are created using the partial equivalent element circuit method which provide options for circuit-level simulations as well as analytic estimation of inductance. The circuit solution matches results from the full-wave simulation model within 9% for the 8-terminal capacitor and within …

Electromagnetic Wave-Matter Interactions In Complex Opto-Electronic Materials And Devices, Raj Kumar Vinnakota

Doctoral Dissertations

This dissertation explores the fundamentals of light-matter interaction towards applications in the field of Opto-electronic and plasmonic devices. In its core, this dissertation attempts and succeeds in the the modeling of light-matter interactions, which is of high importance for better understanding the rich physics underlying the dynamics of electromagnetic field interactions with charged particles. Here, we have developed a self-consistent multi-physics model of electromagnetism, semiconductor physics and thermal effects which can be readily applied to the field of plasmotronics and Selective Laser Melting (SLM). Plasmotronics; a sub-field of photonics has experienced a renaissance in recent years by providing a large …

Effective Magnetic And Electric Response Of Composite Materials, Mona Hassan Alsaleh

Doctoral Dissertations

Metamaterials (MMs) are nanocomposite materials consisting of metal-dielectric resonators much smaller in size than the wavelength of the incident light. Common examples of metamaterials are based on split ring resonators (SRRs), parallel wires or strips and fishnet structures. These types of materials are designed and fabricated in order to provide unique optical responses to the incident electromagnetic radiation that are not available in naturally existing materials. The MMs can exhibit unusual properties such as strong magnetism at terahertz (THz) and optical frequencies. Additionally, negative index materials (NIMs) can provide negative index of refraction which can be used in many applications …

Analysis Of Dc Microgrids As Stochastic Hybrid Systems, Jacob Andreas Mueller

Doctoral Dissertations

"A modeling framework for dc microgrids and distribution systems based on the dual active bridge (DAB) topology is presented. The purpose of this framework is to accurately characterize dynamic behavior of multi-converter systems as a function of exogenous load and source inputs. The base model is derived for deterministic inputs and then extended for the case of stochastic load behavior. At the core of the modeling framework is a large-signal DAB model that accurately describes the dynamics of both ac and dc state variables. This model addresses limitations of existing DAB converter models, which are not suitable for system-level analysis …