Electrical and Computer Engineering Commons^™

Finite Impulse Response Filter Design Using Cosine Series Functions, Carlton Delos Bishop

Retrospective Theses and Dissertations

Window functions have been extensively used for the design of SAW filters. The classical truncated cosine series functions, such as the Hamming and Blackmann functions, are only a few of an infinite set of such functions. The derivation of this set of functions from orthonormal basis sets and the criteria for obtaining the constant coefficients of the functions are presented. These functions are very useful because of the closed-form expressions and their easily recognizable Fourier transform. Another approach to the design of Gaussian shaped filters having a desired sidelobe level using a 40 term cosine series will be presented as …

Phase Noise Analysis And Basic Measuring Techniques, James A. Ferrell

Retrospective Theses and Dissertations

Oscillators are important elements of RF and microwave communications systems. The increased use of the electromagnetic spectrum requires the use of better and cleaner oscillators. Local oscillators in RF to IF converters play a big role in the overall performance of the receiver systems because phase noise in the local oscillator can drastically reduce the signal to noise ratio at the output of the receiver, especially if the converter is at the front end. Phase noise is the parameter used to describe oscillator stability. The analysis and basic measurement techniques of phase noise are performed in this report.

This research …

Uniformity Correction For A Scanned Long Wavelength Infrared Focal Plane Array, George C. Heinold

Retrospective Theses and Dissertations

This paper presents an alternative approach in providing uniformity correction for an infrared focal plane array by utilizing analog MOSFET circuitry. This technology is compatible with modern VLSI production and is capable of enhanced operation at cryogenic temperatures. The method presented here is a potential contribution to the growing list of special analog circuit configurations which may be incorporated for on-chip signal processing, inside the cryogenic dewar assembly. Electronic packaging of current thermal systems could be significantly reduced in size and weight by trading some of the cumbersome digital algorithms and complex post-processing circuitry for implementation in VLSI form.

The …

A Piezoelectric Actuated Scanning Mirror System Utilizing A Type One Control Loop, David Gibbs

Retrospective Theses and Dissertations

The purpose of this thesis is to design and build an improved control loop for a piezoelectric actuated scanning mirror system. A control system has been built having zero steady state position error and an 80 Hertz bandwidth. This was achieved by placing the piezoelectric actuator in the feedback path of an operational amplifier and placing series cascaded notch filters and lead compensators in the forward path of the control loop. A prototype system, including compensation and feedback, is developed. Its performance compares favorably with that of the system model. It is capable of plus and minus 1.7 degrees of …

Barium Borate In Parametric Oscillation And 1.54 Micron Generation, Mark Kerrigan

Retrospective Theses and Dissertations

As to date, there are several relatively new crystals that have been developed for nonlinear or "parametric" optical applications, including KTP, LAP, KNbO3, m=NA, and BaB204 (barium borate, or simply BBO). The latter crystal, BBO, and the use of BBo to achieve parametric oscillation around an eyesafe wavelength of 1.54 microns is the emphasis of this paper.

Unpublished material includes determining the optimum type of coupling and pump wavelength used when generating 1.54 μm eyesafe radiation based upon Poynting vector walk off, suscpetibilityies, and both signal angular and spectral acceptance widths. Poynting vector walk off curves for linearly polarized extraordinary …

Uniform Energy Discharge For Pulsed Lasers, Eric Calvin Koschmann

Retrospective Theses and Dissertations

The art of achieving a large energy discharge in a controlled manner with relative ease is to use a pulse forming network. Historically the design of such networks generally used a single inductor and capacitor. Although easy to design and implement, this practice does not provide optimum performance in all cases. In particular, most laser welding requires a uniform energy discharge in a pulse to produce a high quality weld. Analysis has shown that when the pulse forming network approximates a lumped constant transmission line a maximum flat pulse is produced with minimal degradation of the pulse rise time. This …

Three-Level Block Truncation Coding, Deborah Ann Lee

Retrospective Theses and Dissertations

Block Truncation Coding (BTC) techniques, to date, utilize a two-level image block code. This thesis presents and studies a new BTC method employing a three-level image coding technique. This new method is applied to actual image frames and compared with other well-known block truncation coding techniques.

The method separates an image into disjoint, rectangular regions of fixed size and finds the highest and lowest pixel values of each. Using these values, the image block pixel value range is calculated and divided into three equal sections. The individual image block pixels are then quantized according to the region into which their …

Design Of A Bandpass Oculometer, Karin Brandauer

Retrospective Theses and Dissertations

A passive oculometer is a device that measures the position of the eye by utilizing the corneo-retinal potential (CRP) generated by the eye. In this thesis, the Bandpass Oculometer replaces the joystick of a personal computer, allowing the viewer to use a computer simply by moving his eyes. Low frequency noise, present in all electronic circuits, produces an offset from the reference point, the center of the screen. In previous lowpass oculometry studies at University of Central Florida, this offset caused the cursor to drift toward the edge of the field of view within a period of 30 seconds, decreasing …

Computer Aided Design Of Linear Phase Finite Impulse Response Digital Filters, Wentao Lyou

Retrospective Theses and Dissertations

This research report is an investigation of techniques for designing linear phase finite-duration impulse response (FIR) filters. The software package, CADFIR, developed for this project can be used to design linear phase FIR digital filters via three well-known design techniques: the window method, the frequency sampling method, and the optimal filter design method. CADFIR has options for designing such standard filters as lowpass, highpass, bandpass, and bandstop filters as well as multipassband-stopband filters. The fundamental properties of FIR filters are discussed and design algorithms associated with the three FIR filter design techniques are developed. Design examples are included and the …

Numerical Analysis Of The Resonant States Of Quantum Wells And Superlattice Devices, Alan Gilbert Whittaker

Retrospective Theses and Dissertations

This thesis is concerned with the development of a numerical model to describe the resonant states associated with quantum well and superlattice devices. A numerical method is described where the time-independent Schrodinger equation is represented as a series of simultaneous algebraic equations using the finite-element method. The eigenvalues for these equations are then found using a Sturm sequence, and the eigenfunctions subsequently calculated using a reverse iteration method containing orthogonality constraints. Simulations of specific devices are presented and compared with experimental results and good correlation is observed.

Analysis Of Phase Noise In Phase Lock Loop, Diane Marie Pavik

Retrospective Theses and Dissertations

This research report presents an introduction into phase lock loops (PLL) with a major emphasis on calculating phase noise in frequency synthesizers. A PLL model that incorporates the major sources of noise is presented for the purpose of design analysis. The model can be used to analyze second and fifth order PLLs which allows the accurate calculation of phase noise as a function of independent variable design parameters. The stability of PLLs is also analyzed to show the effects of a marginally stable system on the resultant phase noise. Developing an accurate PLL model which accounts for the major sources …

Ada Tools For The Description And Simulation Of Digital Signal Processing Systems, Mark D. Happel

Retrospective Theses and Dissertations

While specialized hardware description languages allow for maximum capability and efficiency in a design automation system, the use of a general purpose language in the same role can make the system more available or more available or more practical for a larger set of users. This project demonstrates the use of ADA* for the description and simulation of small digital signal processing systems. Building on conventions and primitives proposed by Denyer and Renshaw, a simple subsystem was described in ADA and then tested with a small simulator also written in ADA.

* ADA is a trademark of the United States …

Computer Simulation Of Dynamic Systems, Charles G. Smith

Retrospective Theses and Dissertations

Computer simulation of a control system is a valuable tool in design or performance evaluation. This is especially true when non-linear elements cannot be ignored and must be included within the model. A general purpose block diagram oriented simulation program will be developed which can utilize continuous, discrete and non-linear building blocks. The software tool will be demonstrated by means of an example.

Data Structure Implementation And Investigation For A Prolog Language Interpreter, Hector Iurcovich

Retrospective Theses and Dissertations

A developmental Prolog language interpreter is constructed in the C programming language. The data type format is a subset of that of the Project Aquarius Prolog Engine proposed and under development at the University of California, Berkley. The design of the Prolog interpreter is part of an investigation at UCF in design of expert system architecture for real time applications. The interpreter facilities of data structure definition and manipulation are developed and applied. The list data structure is used as an example data structure. The scheme for representing structured data is based on the Lisp cons cell. Run-time generated lists …

A Microsequenced Prolog Inference Engine, Jeffrey J. Ferguson

Retrospective Theses and Dissertations

Prolog is a symbolic logic language presently emerging among numerous expert system designs. The architecture for a microsequenced Prolog machine (UPM) capable of providing the basic language features to a host computer is proposed. The Prolog machine functions are portioned into three processor components – Input/Output, Memory, and Central (CPU), where the design of the Central Processor is emphasized. Detailed discussion outlines the CPU facilities used to implement the forward-chaining and backtracking functions for the UPM. The UPM features are compared to the PLM-1, a microsequenced Prolog inference engine under development at University of California, Berkley. An emulation of the …

Phase Statistics For A Lightwave Traveling Through Turbulent Media, Donald J. Link

Retrospective Theses and Dissertations

A probability density function is developed for the phase of light that is the result of adding a signal to noise with K-distributed amplitude and uniform phase. The probability density function of the phase associated with the I-K distribution is also developed. In the process of deriving the probability density function of the phase much I as learned about the relationships between different probability density functions. Three different methods of deriving homodyned K statistics are shown to be equivalent. Two different methods of deriving I-K statistics are shown to be equivalent. Theoretical moments of the homodyned K distribution are compared …

Awqpsk : An Optimum Modulation Technique For Spread Spectrum Communication, Madjid A. Belkerdid

Retrospective Theses and Dissertations

Quadrature phase shift keying (QPSK) and minimum shift keying (MSK) are the two most used M-ary modulation techniques in Direct-Sequence (DS) Spread Spectrum Communication systems. This thesis introduces a new modulation technique that can compete well with QPSK and MSK in many applications. This new modulation technique, made up of a superposition of one QPSK signal and two amplitude weighted QPSK signals, is called Amplitude Weighted Quadrature Phase Shift Keying (AWQPSK). It is found to have the same probability of error as QPSK and MSK techniques. It has a higher bandwidth efficiency in bits/sec/Hz than QPSK and MSK. It has …

A Comparison Of N-Path And Digital Filters For Band Pass Applications, Stephen Cooperman

Retrospective Theses and Dissertations

The classic problem of achieving high Q, band pass, inductorless filters has been traditionally attacked by applying active RC networks. This approach suffers from the faults of poor economy, lack of stability of performance with time and temperature, and high network performance sensitivity to component changes. The problem is reviewed from the aspect of applying techniques other than operational amplifier RC filters. The techniques presented are those of N-Path (switching) and Digital Filters. The underlying theory of both methods is explored and a design example for each of the techniques is presented. These designs are then compared on the basis …

A High Speed Pulse Code Laser Diode Modulator, John Lawrence Mcdonough

Retrospective Theses and Dissertations

This research report reviews the basics of pulse code modulation (PCM) techniques and includes a special encoder design for a system which uses a laser diode output for the transmitted pulse. The text discusses PCM and its features, PCM formats, synchronization, and various accepted PCM codes. The encode circuit design is complete with a description of the circuit, circuit components, and operation. Included are the necessary diagrams, figures, specifications, and parts list. The transmitted output of the design circuit has a repetition rate of one megabit per second.