Electrical and Computer Engineering Commons^™

Automatic Three Phase Balancing In Utility Applications, Ryan Morris

ATU Scholars Symposium

Balancing three-phase power has become more important as modern loads like EVs and large agricultural fans create fast and uneven changes in distribution systems. Manual balancing is slow, inconsistent, and often only done during certain “seasons,” which leaves long periods of imbalance. This paper reviews existing automatic methods such as the Fast-Switching Relay method, the Practical Balancing Algorithm, and the Phase-EQ system and highlights their benefits and limitations. Based on this analysis, a new method called the Predicted Practical Balancing Algorithm (PPBA) is proposed. The PPBA combines the stability of threshold-based switching with historical data to predict when imbalances are …

Preliminary Study Of Circular Lithium-Ion Battery Thermal Management System With Intermittent Cooling, Muhammad Luthfi, Leo Van Gunawan, Yudhy Kurniawan, Sabda Ikhwal Rahmatullah, Alfarikh Muhammad Daen

Journal of Mechanical Engineering Science and Technology (JMEST)

The active battery thermal management system is important to maintain the lithium-ion battery temperature within the optimum and safe range. However, current research has not considered the potential for excessive energy consumption due to the continuous operation of a fluid flow source, such as a fan. This research aims to investigate the effect of a novel approach called intermittent cooling on the cooling efficacy and energy consumption of the circular-configuration BTMS. Both transient computational fluid dynamic simulation and experiment were conducted in this work with 30 pieces of 18650 Lithium-Ion batteries positioned in a staggered circular configuration. From the result, …

Triple Active Bridge Implementation And Control, Nehemiah Milton

Miners Solving for Tomorrow Research Conference

The Triple Active Bridge (TAB) is a three-port power converter that allows power flow in both directions with galvanic isolation. This has a wide range of applications, like high-frequency DC-DC conversion, electric vehicles, microgrids and renewable energy systems. To control the TAB during operation, two phase shift parameters between the bridges are adjusted. In this presentation, I will showcase the software and simulation optimizations which extend previous work by reproducing hardware results which align with simulations. I will also go over the knowledge I’ve gained and the skills acquired through this project.

Control And Stability Analysis Of Three-Phase Grid-Connected Inverters In Renewable Energy Systems, Yasser Ayeva

Electrical Engineering and Computer Science Faculty Publications and Presentations

The increase in demand for renewable energy sources such as solar and wind systems has led to widespread use and integration of a three-phase grid connected inverters in electric modern electric power systems. The inverters are essential to convert DC power into AC power and to control the delivered power to the grid. However, the use of the inverters in a renewable energy system has some challenges related to stability and control due to the presence of power electronic interfaces and filter dynamics. This paper analyzes the control and stability of three phase grid connected inverter through an LCL filter. …

Axial Sulfur-Coordination Engineering Boosting Fe–N–C Catalysts For High-Performance Proton Exchange Membrane Fuel Cells, Lin Lin, Xiu-Xuan Hou, Zhe-Chen Fan, Yi-Xuan Yin, Wei-Yi Zhao, Kai Wei, Yu-Die Zhou, Li-Na Hou, Ying Wang, Hao Wan, Jun-Jie Ge

Journal of Electrochemistry

Fe-N-C catalysts have long suffered from kinetically sluggish oxygen reduction reaction (ORR) due to excessive adsorption strength toward oxygen intermediates and low site utilization. Heteroatom doping effectively accelerates ORR reaction kinetics through electronic structure modulation of metal sites for optimal intermediate adsorption, while chemical vapor deposition (CVD) enhances the turnover frequency (TOF) of active sites. Herein, we developed an FeSNC catalyst featuring abundant FeS₁N₄ sites via a dual-precursor CVD strategy. Experimental and theoretical analyses revealed that S incorporation disrupts the symmetric coordination of active sites, which optimizes OH* adsorption energies from 0.212 eV to 1.194 eV. Moreover, …

Deciphering The Role Of Binder Reaction Exothermicity In Thermal Runaway Of Lithium-Ion Cells, Wen Wen, Jing-Hong Zhou, Hao-Tian Lu, Xing-Gui Zhou

Journal of Electrochemistry

Thermal safety associated with lithium-ion cells as power sources remains a critical industry concern. A comprehensive understanding of how internal exothermic side reactions contribute to temperature rise is fundamental for accurately analyzing thermal runaway processes and predicting the thermal safety of lithium-ion cells. While various side-reactions, such as decomposition of solid electrolyte interphase layer, reaction between anode materials and electrolyte, reaction between cathode materials and electrolyte, and electrolyte decomposition, have been identified as heat generation sources in previous studies, the quantification of these reactions remains insufficiently standardized. Particularly, the impact of heat generation from binder decomposition (most commonly polyvinylidene difluoride) …

Enhanced Cuckoo Search-Based Optimization For Single Distributed Generation Placement And Sizing In Radial Distribution Systems, Samson Oladayo Ayanlade, Abdulrasaq Jimoh, Richard Oladayo Olarewaju, Ignatius Kema Okakwu, Israel O. Adejumobi, Joseph B. Samson, Oluwadare A. Adebisi, Oluwadare O. Akinrogunde

Al-Bahir

This paper presents an Enhanced Cuckoo Search Algorithm (ECSA) to optimally place and size Distributed Generation (DG) in radial distribution systems to minimize real power loss within operating constraints. The proposed ECSA has exponentially decaying adaptive Lévy flights, constraint-aware solution repair with dynamic penalty coefficients, and diversity-directed stochastic replacement to enhance search robustness and convergence speed. It was tested with 30 independent runs on the IEEE 33-bus, IEEE 69-bus, and a practical Nigerian 32-bus distribution network. The simulations show that the ECSA lowers the active power loss of the IEEE 33-bus system from 201.58 kW to 102.75 kW (49.03%), and …

Quantifying And Integrating Community Hardship Into Two-Stage Stochastic Grid Reliability Optimization With Battery Storage, Fredrica Arthur

LSU Master's Theses

Traditional reliability planning for conventional distribution systems is largely utility-oriented, with a focus on collective system performance metrics like Expected Energy Not Supplied (EENS), where implicitly all unserved energy is considered of equal weight in terms of post-outage economic hardship. Yet, it is well understood that extended outage durations cause an uneven level of hardship to socioeconomically disadvantaged communities. This thesis proposes a community-informed reliability planning framework where the hardship caused by outages is explicitly considered in the battery energy storage system (BESS) location and sizing problem. First, a hardship-weighted Energy Not Supplied (WENS) measure is proposed, where income, education, …

Availability Model To Evaluate Ai Data Centers’ Role In Grid Stability, Troy Mcsimov, Trevor S. Kunz, Jeffrey Billo

SMU Data Science Review

The United States has made it clear; it is imperative that the US wins the global AI race. This paper focuses on one of the most challenging puzzle pieces surfaced at the POWER Data Center conference (San Antonio, Sept. 30.); for Electric Reliability Council of Texas (ERCOT) the limiting factor is not generation alone but the need to balance generation and load to preserve grid reliability.

The regulatory landscape fundamentally changed with the passage of Texas Senate Bill 6 in June 2025, which mandates new large loads must "contribute to the recovery of the interconnecting electric utility’s costs" (Texas Legislature, …

Reducing Range Anxiety Through Predictive Modeling Of Ev Battery Degradation, Caleb Thornsbury, Christian Castro, Bivin Sadler

SMU Data Science Review

Electric Vehicles (EV) range anxiety remains one of the top barriers for broader adoption. Range anxiety can be attributed to battery pack age and degradation over time. This paper plans to explore how to address this issue by creating a machine learning model that can predict degradation based on usage, temperature, battery chemistry, charging habits and exploring whether other factors tie into range degradation. This research will be using real world charging data along with lab tested chemistry data to build a model that can be chemistry specific for degradation. This paper will help perspective used-EV buyers learn about battery …

Sustainabake, Kevin Kunta Swanson Ii

Electrical Engineering

This senior project outlines the development of an oven that utilizes renewable energy to operate safely and effectively. It aims to test building an oven using mostly basic hardware students acquired during their time at Cal Poly and provide a starting point for those interested in creating a solar-powered oven. As our society continues to innovate and increasingly relies on electricity, it is important to place more emphasis on how we can make our lives sustainable to take care of our environment without introducing excessive pollutants. Food preparation is a daily activity that typically involves significant energy consumption, making this …

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu

Journal of Electrochemistry

The redox active species in all-vanadium redox flow batteries (VRFBs) reside in the electrolyte, while the heterogeneous reactions occur on the electrode surface; the electrode is therefore the decisive platform for dynamic adsorption, electron transfer, and ion conversion, especially for the VO²⁺/VO₂⁺ and V²⁺/V³⁺ couples. One of the major challenges for VRFBs is the slow charge transfer in VO²⁺/VO₂⁺ and V²⁺/V³⁺ reactions, mainly caused by poor catalytic performance of electrodes and weak adhesion of catalysts to electrodes. This review focuses on the key challenges and recent …

Strategic Research On Rebco High-Temperature Superconducting Tapes, Tianping Ying, Dongliang Wang, Pengtao Yang, Lin Zhao, Zhongtang Xu, Ziyi Liu, Chao Yao, Yanwei Ma, Xingjiang Zhou, Jinguang Cheng, Zhong Fang

Bulletin of Chinese Academy of Sciences (Chinese Version)

High-temperature superconducting materials, represented by REBCO (REBa2Cu3O7-δ, where RE denotes rare-earth elements), are of significant strategic importance in fields such as energy, healthcare, and large-scale scientific facilities due to their excellent performance in the liquid nitrogen temperature range. However, they still face severe challenges in long-tape uniformity, production cost, and engineering reliability. Future development must shift toward a “material-processing-application” collaborative innovation model, aiming at enhancing flux pinning, optimizing the interfaces and mechanical properties of the multilayer structure, and integrating scalable and intelligent fabrication technologies to promote the low-cost and stable production of high-performance tapes. This study analyzes the core application …

Machine Learning In Peak Demand Forecasting: Foundations, Trends, And Insights, Shuang Dai, Fanlin Meng, Hongsheng Dai, Qian Wang, Xizhong Chen, Wenlei Bai, Peizhi Shi, Richard Allmendinger, Yuchen Zhang, Jian Liu

Electrical and Computer Engineering Faculty Research & Creative Works

Peak demand forecasting involves predicting the maximum electricity demand within a specific period, which plays a key role in maintaining the efficiency and stability of power systems. The rapid evolution of power systems, driven by advanced metering infrastructure, local energy applications such as electric vehicles, and the increasing adoption of intermittent renewable energy, has introduced greater randomness and reduced predictability in peak demand. Given the pressing need to address more diverse implementation requirements across different contexts, accurate and reliable peak demand forecasting has become increasingly important. To the best of our knowledge, this study is the first to provide a …

Carbon Supported Octahedral Ptni Nanoparticles (Oct-Ptni/C) As A Cathode Catalyst For Proton Exchange Membrane Fuel Cells (Pemfcs) With Improved Activity And Durability, Zi-Wei Feng, Hai-Zhong Chen, Xiao Duan, Ling Tang, Yun-Kun Zhao, Long Huang

Journal of Electrochemistry

Proton exchange membrane fuel cells (PEMFCs) are considered as a promising renewable power source. However, the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction (ORR) kinetics even on state-of-the-art Pt catalyst. Octahedral PtNi nanoparticles (oct-PtNi NPs) with excellent ORR activity in a half-cell have been widely studied, while their performance in membrane electrode assembly (MEA) has much less reported. Herein, we investigated the MEA performance using the carbon supported oct-PtNi NPs (oct-PtNi/C) as the cathode catalyst. Under the mild acid washing condition, the surface …

Development Status And Existing Problems Of Ion-Solvation Membranes For Electrolysis Of Water, Zheng-Yuan Zhou, Yu-Tao Sun, Zheng-Bang Liu, Chuan-Zheng Wang, Yong-Nan Zhou, Xi Luo, Tian-Chi Zhou, Jin-Li Qiao

Journal of Electrochemistry

Ion-solvaing membranes (ISMs) have received extensive attention in recent years as a key component in electrochemical energy conversion and storage devices. This article provides an overview of structural composition, performance advantages, research progress, ion conduction mechanism and existing issues of ISMs, primarily classifying them according to the matrix structure. A detailed analysis of performance enhancement methods, key performance indicators of ISMs and performance influencing factors is also presented. The article contributes to further optimizing the design and application of ion-solvation membranes, providing theoretical support for the development of fields such as hydrogen production through electrolysis of water and electrochemical energy …

The Ntp Anode For Aqueous Sodium Ion Batteries: Recent Advances And Future Perspectives, Ming-Li Wang, Xue-Ying Su, Zheng-Xiang Shan, Shu-Zhe Yang, Heng-Rui Guo, Hao Luo, Dong-Liang Chao

Journal of Electrochemistry

Aqueous sodium-ion batteries (ASIBs) have attracted great attention in aqueous batteries due to their merit of high safety. However, the constrained work potential and insufficient chemical stability of anode materials in aqueous electrolytes hinder the large-scale application of ASIBs. Sodium titanium phosphate, NaTi₂(PO₄)₃ (NTP), is considered one of the most promising anode materials for ASIBs due to its excellent electrochemical performance and tunable structure. Recently, great achievements have been made in the development of NTP, however, a comprehensive review of existing studies is still lacking. This article firstly introduces the basic properties of NTP and …

Iron-Involved Orr Electrocatalysts Under The Lens Of In-Situ/Operando Mössbauer Spectroscopy, Sumbal Farid, Jun-Hu Wang

Journal of Electrochemistry

Exploring cost-effective and efficient catalysts for oxygen reduction reaction (ORR) poses a significant challenge, especially in the pursuit of alternatives to precious metals like platinum. Significant advancements have driven electrochemists to develop efficient ORR catalysts using abundant materials, particularly iron (Fe)-based, known for their exceptional performance in ORR. While the crucial function of Fe in boosting ORR catalytic activity is recognized, the connection between material attributes and catalytic performance remains enigmatic. Understanding the dynamic processes involved in oxygen electrocatalysis is paramount for designing precious-metals-free ORR electrocatalysts. Mössbauer spectroscopy stands out as a powerful technique for deciphering the structural characteristics of …

Localized Air Pollution Impacts From Data Centers In Northern Virginia, Damian Pitt, Ivan Suen, Ellie Plisko

Institute for Sustainable Energy and Environment Publications and Presentations

This report examins the extent of air pollution emissions resulting from the use of backup generators at data centers in Northern Virginia, including both actual current emissions and potential future emissions, and how those emissions totals compare to other sources of air pollution in the Northern Virginia region. It also examines how exposure to data center emissions correlates with demographic characteristics such as race, income, and education.

We while the air pollution emissions from individual data centers is minor, the collective impact from the 100+ such facilities in the Northern Virginia region is significant. Notably, the cumulative emissions exposure in …

Validating A Low-Cost Radio Frequency Characterization Framework For Development-Grade Software-Defined Radios In Short-Duration Cubesat Missions, Thomas Wayne Francois

Masters Theses

Software-defined radios (SDRs) and CubeSat platforms have reduced the cost and complexity of space-based communication systems, enabling broader participation in satellite missions. While low-cost radio hardware is increasingly accessible, the ability to characterize and validate its performance remains constrained by the high cost and limited access to traditional RF test equipment. This disparity creates a challenge for small satellite development teams, which must characterize communication-system technical performance with limited access to laboratory-grade instrumentation.

This thesis presents a low-cost RF characterization framework for assessing key radio-frequency performance metrics using readily available hardware and measurement techniques. The approach integrates frequency translation, SDR-based …

Ammonia Synthesis By Nanosecond Pulsed Atmospheric Pressure Plasma Jets Impinging On Water, Zach Caudell, Lynnet Rich, Olga Pakhomova, Chunqi Jiang

Bioelectrics Publications

Developing energy-efficient technologies for carbon-neutral ammonia (NH₃) synthesis is critical for decentralized fertilizer production and global decarbonization. This study investigates generating NH₃ from water using a nanosecond pulsed atmospheric pressure plasma jet (ns‑APPJ) operating in either N₂ or dry air. The plasma jet reactor employed approximately 250 ns, up-to-22 kV pulses at 500 Hz to sustain a nonequilibrium discharge impinging directly on static liquid water. The kinetics, energy efficiency, and product selectivity of NH3 formation were quantified as functions of the pulse voltage, repetition frequency (PRF), and gas flow rate. NH₃ production increased linearly with treatment time and scaled strongly …

Cybersecurity Center For Offshore Wind Energy (Final Project Round), Sachin Shetty

Center for Secure and Intelligent Critical Systems (CSICS) Publications

This project establishes a Cybersecurity Center for Offshore Wind Energy with the objective of designing and operating a cyber-physical testbed for wind energy farms (WEFs) that enables comprehensive cybersecurity research. The testbed incorporates a Supervisory Control and Data Acquisition (SCADA) system connected to turbine models via industrial-grade programmable logic controllers (PLCs) and remote terminal units (RTUs). It supports side-channel data acquisition, implementation and analysis of various cyberattack scenarios, and development of attack detection, mitigation, and best-practice guidance tailored to wind energy systems. During the project, the team expanded the number and fidelity of mathematical turbine models (MTMs), integrated these models …

Agricultural Productivity Under Energy Development: Insights From California, Wai Yan Siu, Sherzod B. Akhundjanov

ODU Articles

This paper examines how agricultural productivity patterns in Kern County, California, a leading region for both agricultural production and oil and gas development, co-vary with the spatial and temporal expansion of hydraulic fracturing and associated energy infrastructure. Using parcel- and county-level analyses, we characterize how agricultural productivity differs across proximity to energy development and across spatial scales. The results reveal spatially heterogeneous and scale-dependent patterns: parcel-level evidence indicates lower Enhanced Vegetation Index-based vegetation productivity within the 20-mile proximity zone around fracking wells, while county-level results show heterogeneous crop-specific yield changes during the post-expansion period. Together, these findings highlight the importance …

A Full Polymer Piezoelectric Flextensional Energy Harvester, Nadia Ahbab, Sidra Naz, Bingqi Zhao, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

This study presents a full polymer piezoelectric flextensional energy harvester (FPPFEH) comprising a single-layer poly(vinylidene fluoride) (PVDF) film bonded to a 3D-printed polylactic acid (PLA) flextensional frame. For an arm inclination angle of θ=10°, the free-body model gives a theoretical geometric force-amplification factor of M_F=cot θ ≈ 5.67; this value represents an ideal upper bound and was not independently validated by local force or strain measurements. During assembly, the film was tensioned only to remove visible slack and maintain a flat configuration. No intentional pretension was applied, and any residual tension was not measured. Off-resonance force-controlled tests showed …

Multi-Objective Optimization Of Energy Costs And Ev Battery Health In V2g Enabled Homes, Dzifa M. Hodey

Theses and Dissertations--Computer Science

Electric vehicles (EVs) and rooftop solar photovoltaic (PV) systems are increasingly being integrated into residential settings, creating new opportunities for vehicle-to-grid (V2G) and vehicle-to-home (V2H) operations. In these systems, the EV battery functions as a controllable energy storage unit that can charge from the grid or PV and discharge energy to supply household load or export to the grid for a profit. By intelligently scheduling this bidirectional power exchange, households can reduce electricity costs and enhance PV utilization. Realizing these benefits requires optimization strategies that balance cost reduction with EV battery health preservation. However, existing V2G/V2H studies largely emphasize cost …

Co-Sputtered Cuni Heteroatomic Electrocatalyst For Enhanced 5-Hydroxymethylfurfural Selective Electrochemical Conversion, Moumita Dikshit, Baleeswaraiah Muchharla, Luz Vazquez Rivera, Kapil Kumar, Sunita Sanwaria, Kishor Kumar Sadasivuni, Abdennaceur Karoui, Sandeep Kumar, Adetayo Adedeji, Bijandra Kumar

Civil & Environmental Engineering Faculty Publications

The electrochemical conversion of biomass-derived 5-hydroxymethylfurfural (HMF) represents a promising, economically viable, and environmentally sustainable approach for producing value-added chemicals using renewable energy and in situ hydrogen generated through water electrolysis. However, the electrochemical hydrogenation (ECH) of HMF remains challenging due to the inherently low catalytic activity and selectivity of the electrodes, compounded by competition with the kinetically favored hydrogen evolution reaction (HER) in aqueous electrolytes. In this work, we demonstrate that Cu_xNi_100-x heteroatomic thin films, fabricated via direct current (DC) magnetron co-sputtering, achieve a more than one order of magnitude increase in the HMF to 2,5-Bis-hydroxymethylfuran …

Analytical And Semi-Analytical Modeling Of Solar Cells Using The Lambert W Function: A Comprehensive Review Of Equivalent Circuits, Adel El-Shahat, Martin Ćalasan, Snežana Vujoševic, Shady H. E. Abdel Aleem

Engineering Technology Faculty Publications

The modeling of photovoltaic (PV) cells through equivalent circuits forms a central element in the analysis, simulation, and optimization of solar energy systems. Traditional approaches often depend on iterative numerical methods to solve the implicit current–voltage (I–V) equations. In contrast, the Lambert W function has emerged as an effective mathematical tool that enables closed-form or semi-analytical expressions for a wide range of PV models. This paper presents a Lambert W-centered review of analytical and semi-analytical formulations for PV equivalent-circuit models, covering classical single-diode and multi-diode structures and modern variants incorporating additional elements, voltage-dependent parameters, and topology rearrangements. The models are …

Comparative Assessment Of Energy And Emission Costs For Geothermal Heat Pumps And Fossil-Fuel Heating Systems Across U.S. Climatic Zones, Md Shahin Alam, Shima Afshar, Seyed Ali Arefifar, Mohammad Haq

Electrical & Computer Engineering Faculty Publications

In response to growing concerns over global warming and energy sustainability, transitioning from fossil-fuel-based heating systems to renewable alternatives is essential. This study evaluates the economic and environmental performance of geothermal heat pumps for building heating and compares it with conventional coal-fired boilers, natural-gas boilers, and diesel furnaces. Using the heating degree-day (HDD) method, heating energy demand was analyzed for four U.S. cities—Anchorage (AK), San Francisco (CA), Salt Lake City (UT), and Las Vegas (NV)—representing diverse climatic zones. The analysis integrates thermodynamic and economic parameters, including the coefficient of performance (COP = 2–5) and annual fuel-utilization efficiency (AFUE = 80–97%), …

Analysis Of Policies And Incentives For The Successful Implementation Of Hydrogen-Fueled Medium-Duty And Heavy-Duty Vehicles In Humboldt County, California, Alka Verma

Cal Poly Humboldt theses and projects

The 21st century has seen a significant rise in global greenhouse gas (GHG) emissions, with the transportation sector contributing 23% of these emissions. Medium-duty and heavy-duty vehicles (MD/HD) are particularly impactful, accounting for over a quarter of transport-related emissions. In Humboldt County, California, transportation represents 53% of total emissions, with MD/HD vehicles being a major contributor. As light-duty vehicles shift to zero-emission alternatives, the MD/HD sector faces unique challenges. Hydrogen fuel cell vehicles offer a promising solution, providing longer range, higher energy density, and quicker refueling compared to battery electric vehicles (BEVs). These features make hydrogen an attractive option for …

Renewable And Affordable Energy For Apartments. Inquiry Into Renewable And Affordable Energy For Apartments, Nishadi Ruwandima Weerasinghe Mudiyanselage, Asma Aziz

Research outputs 2022 to 2026

Recent literature identifies a persistent disparity between detached housing and apartments in accessing renewable and affordable electricity. While rooftop solar PV deployment in Australia  has expanded rapidly since 2017, access to these technologies in multi-unit dwellings (MUDs) remains limited, resulting in higher electricity costs for apartment residents compared with standalone houses. This inequity is increasingly significant given rising electricity prices and the growing share of Australians living in apartments.