Electrical and Computer Engineering Commons^™

Impact Of Ethanol On The Evolution Of One-Step Synthesized Gold Nanoplates And Nanostars And Their Effects On Raman Signal Enhancement, Ananda Fania, Nonni Soraya Sambudi, Kirana Yuniati Putri, Yuliati Herbani, Affi Nur Hidayah

Makara Journal of Science

Gold nanoplates and nanostars were synthesized from a gold metal salt solution (HAuCl₄) using a one-step synthesis method of ultraviolet C (UVC) light irradiation. The gold salt solution was mixed with ethanol in 6 mL with the following ratios: (1.5:4.5, 3:3, and 4.5:1.5), and subsequently irradiated with UVC light. Changes in localized surface plasmon resonance (LSPR) shifts were observed in real time at 30-min intervals for 2 h. The synthesis process produces gold nanoplates. While gold nanostars were synthesized from a solution of gold salt combined with ethanol, ascorbic acid, and AgNO₃, maintaining a consistent ratio …

Regulating Lithium Metal Nucleation And Growth For Dendrite Suppression: From Liquid-Electrolyte To Solid-State Batteries, Ao Du, Juan Zhang, Pan Xu, Ya-Jie Li, Kang-Yu Yi, Zhen-Zhen Shen, Hui-Lin Ge, Guang-Wen Zhang, Chao-Hui Zhang, Yu-Hao Wang, Chen-Zi Zhao, Meng-Yang Xu, Yu-Lin Jie, Rui Wen, Shu-Hong Jiao, Si-Qi Shi, Qiang Zhang, Chun-Peng Yang, Yu-Guo Guo

Journal of Electrochemistry

Lithium metal anodes, with a theoretical capacity of up to 3860 mAh·g⁻¹, are regarded as the cornerstone for developing next-generation high-energy-density batteries. However, several key challenges hinder their practical applications, including dendrite formation, unstable solid electrolyte interphase (SEI), side reactions with electrolytes, and associated safety risks. This review systematically explores the mechanisms of lithium nucleation, growth, and stripping in both liquid and solid-state battery systems, analyzing critical theoretical concepts like heterogeneous nucleation thermodynamics, surface diffusion kinetics, space charge effects, and SEI-induced nucleation, which are crucial for understanding the genesis of dendrite growth. Additionally, the review discusses the electrochemical-mechanical …

Development Trends And Priority Research Fields Of Electrochemical Discipline In The 15th Five Year Plan Period, Lin Zhuang, Wen-Bin Cai, Heng-Xing Ji, Qing Li, Gong-Wei Wang, Sen Xin, Qing Zhao, Fang-Yi Cheng, Yu-Guo Guo, Lan-Qun Mao, Yang Tian, Fei Wu, Li-Min Zhang, Yan Xiang, Jin-Song Hu, Rui Cao, Li Xiao, Hua-Bing Tao, Wei Xing, Dong-Ping Zhan, Hong-Gang Liao, Mei-Ling Xiao, Bin Ren, Zhang-Quan Peng, Rui Wen, Xiang Wang, Yue-Feng Song, Hou-Fu Lv, Bao-Yu Xia, Guo-Xiong Wang, Jun Cheng, Zhi-Pan Liu, Min Zhou, Bing Huang, Cun-Pu Li, Yu-Qin Zou, Shuang-Yin Wang, Hai-Bo Lin, Zi-Dong Wei

Journal of Electrochemistry

In fulfillment of the national science-and-technology development agenda, the Department of Chemical Sciences of the National Natural Science Foundation of China (NSFC) convened the Strategic Symposium on the Fifteenth Five-Year (2026–2030) Development Plan for Electrochemistry held in Xiamen on 29 August, 2025—the culminating year of the Fourteenth Five-Year (2021–2025) Development Plan. More than forty leading experts in the field of electrochemistry participated with spanning nine thematic fronts: Interfacial Electrocatalysis, Interfacial Electrochemistry for Energy Storage, Bioelectrochemistry, Electrochemistry of Hydrogen Energy, Electrochemical Micro-/Nano-Manufacturing, Operando Electrochemical Characterization, Electro-Thermal Coupling Catalysis, Theoretical and Computational Electrochemistry, and Electrochemical Synthesis. The forum assembled China’s foremost electrochemical …

High-Voltage Solid-State Lithium Batteries: A Review Of Electrolyte Design, Interface Engineering, And Future Perspectives, Cheng Yang, Zi-Xin Liang, Ming-Yun Zhang, Ming-Zhe Chen, Kai Zhang, Li-Min Zhou

Journal of Electrochemistry

Solid-state lithium batteries have become a research hotspot in the field of large-scale energy storage due to their excellent safety performance. The development of high-voltage positive electrode materials matched with lithium metal anode have advanced the energy density of solid-state lithium batteries close to or even exceeding that of lithium batteries based on a liquid electrolyte, which is expected to be commercialized in the future. However, in high voltage conditions (> 4.3 V), the decomposition of electrolyte components, structural degradation, and interface side reactions significantly reduce battery performance and hinder its further development. This review summarizes the latest research progress …

Strategies For Obtaining High-Performance Li-Ion Solid-State Electrolytes For Solid-State Batteries, Yi-Cheng Deng, Zi-Chang You, Geng-Zhong Lin, Guo Tang, Jing-Hua Wu, Zhi-Min Zhou, Xiang-Chun Zhuang, Li-Xuan Yang, Zhen-Jie Zhang, Zhao-Yin Wen, Xia-Yin Yao, Chang-Hong Wang, Qian Zhou, Guang-Lei Cui, Ping He, Hui Li, Xin-Ping Ai

Journal of Electrochemistry

With the widespread adoption of lithium-ion batteries (LIBs), safety concerns associated with flammable organic electrolytes have become increasingly critical. Solid-state lithium batteries (SSLBs), with enhanced safety and higher energy density potential, are regarded as a promising next-generation energy storage technology. However, the practical application of solid-state electrolytes (SSEs) remains hindered by several challenges, including low Li⁺ ion conductivity, poor interfacial compatibility with electrodes, unfavorable mechanical properties and difficulties in scalable manufacturing. This review systematically examines recent progress in SSEs, including inorganic types (oxides, sulfides, halides), organic types (polymers, plastic crystals, poly(ionic liquids) (PILs)), and the emerging class of soft …

Developing A Low-Temperature Pathway For The Synthesis Of Two-Dimensional Ws2 Nanosheets, Akhil Potdar

Holster Scholar Projects

Since their discovery in 2004, two-dimensional (2D) materials have attracted great attention due to their unique mechanical, electrical, and chemical properties. However, their integration into devices is limited by the high temperatures required for crystalline growth, which prevents the use of flexible and biocompatible substrates like polymers for biomedical and next-generation electronic devices. This project aims to therefore develop a low-temperature synthesis process for two-dimensional tungsten disulfide (WS₂), a material particularly promising due to its tunable bandgap and biocompatibility. We propose that by first depositing an intermediate tungsten oxide film (WOx) via Hollow Cathode Plasma-Assisted Atomic Layer Deposition (HCP-ALD) and …

Bridging Materials And Energy Storage Mechanisms In Zn-I2 Batteries, Rong-Qi Liu, Wen-Shuo Shang, Jin-Tao Zhang

Journal of Electrochemistry

Zinc-iodine (Zn-I₂) batteries have emerged as a compelling candidate for large-scale energy storage, driven by the growing demand for safe, cost-effective, and sustainable alternatives to conventional systems. Benefiting from the inherent advantages of aqueous electrolytes and zinc metal anodes, including high ionic conductivity, low flammability, natural abundance, and high volumetric capacity, Zn-I₂ batteries offer significant potential for grid-level deployment. This review provides a comprehensive overview of recent progress in three critical domains: positive-electrode engineering, zinc anode stabilization, and in situ characterization methods. On the cathode side, anchoring iodine to conductive matrices effectively mitigates polyiodide shuttling and enhances …

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (2/4): Report 2: High-Performance Water Splitting Electrocatalysts, Ling Zhang, Wang-Yang Wu, Qiu-Yue Hu, Shi-Dan Yang, Li Li, Rui-Jin Liao, Zi-Dong Wei

Journal of Electrochemistry

The unavailability of high-performance and cost-effective electrocatalysts has impeded the large-scale deployment of alkaline water electrolyzers. Professor Zidong Wei’s group has focused on resolving critical challenges in industrial alkaline electrolysis, particularly elucidating hydrogen and oxygen evolution reaction (HER/OER) mechanisms while addressing the persistent activity-stability trade-off. This review summarizes their decade-long progress in developing advanced electrodes, analyzing the origins of sluggish alkaline HER kinetics and OER stability limitations. Professor Wei proposes a unifying “12345 Principle” as an optimization framework. For HER electrocatalysts, they have identified that metal/metal oxide interfaces create synergistic “chimney effect” and “local electric field enhancement effect”, enhancing selective …

Local Electric Fields Coupled With Cl− Fixation Strategy For Improving Seawater Oxygen Reduction Reaction Performance, Yu-Rong Liu, Miao Zhang, Yan-Hui Yu, Ya-Lin Liu, Jing Li, Xiao-Dong Shi, Zhen-Ye Kang, Dao-Xiong Wu, Peng Rao, Ying Liang, Xin-Long Tian

Journal of Electrochemistry

Development of robust electrocatalyst for oxygen reduction reaction (ORR) in a seawater electrolyte is the key to realize seawater electrolyte-based zinc-air batteries (SZABs). Herein, constructing a local electric field coupled with chloride ions (Cl⁻) fixation strategy in dual single-atom catalysts (DSACs) was proposed, and the resultant catalyst delivered considerable ORR performance in a seawater electrolyte, with a high half-wave potential (E_1/2) of 0.868 V and a good maximum power density (Pmax) of 182 mW·cm⁻² in the assembled SZABs, much higher than those of the Pt/C catalyst (E_1/2: 0.846 V; Pmax: 150 mW·cm^{−2 …}

Significantly Enhanced Oxygen Reduction Reaction Activity In Co-N-C Catalysts Through Synergistic Boron Doping, Chang Lan, Jing-Sen Bai, Xin Guan, Shuo Wang, Nan-Shu Zhang, Yu-Qing Cheng, Jin-Jing Tao, Yu-Yi Chu, Mei-Ling Xiao, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance disparity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction (ORR). In this work, we strategically engineer the active site structure of Co-N-C via B substitution, which is accomplished by the pyrolysis of ammonium borate. During this process, the in-situ generated NH₃ gas plays a critical role in creating surface defects and boron atoms substituting nitrogen atoms in the carbon structure. The well-designed CoB₁N₃ active site endows Co with higher charge density and stronger adsorption energy toward oxygen species, …

Nanostructured Zinc Stannate Perovskite Films Synthesized Via Molten Salt Modified-Solvothermal Method For Enhanced Piezoelectric Properties, Christopher Munoz, Alyssah Fuentes, Christian Alaniz, Tarik Dickens, Mohammed Jasim Uddin

School of Integrative Biological & Chemical Sciences Faculty Publications

Three dimensional (3D) piezoelectric zinc stannate (ZnSnO3) nanoweb arrays are synthesized using a molten salt modified solvothermal method and deposited in PDMS films for electrochemical analysis of its piezoelectric response. This work is a preliminary assessment of comparative piezoelectric efficacy influenced by changes in synthesis, effecting dimension and particle size. Advantages of hydrothermal, molten salt, and solvothermal synthesis methods were leveraged to facilitate several chemical and surface engineering techniques to enhance piezoelectric properties by increasing the surface area of zinc stannate nanoparticles. The combination of these treatments reduce the size of zinc stannate to approximately ∼40nm-80nm weblike networks. Scanning …

Single-Molecule Orientation And Localization Microscopy, Sophie Brasselet, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Single-molecule localization microscopy (SMLM) offers enhanced spatial resolution in optical microscopy, providing detailed insights into the spatial organization of proteins in cells at the nanoscale. Over the past decade, SMLM has progressively incorporated the capability to retrieve the orientations of single molecules using their polarized dipolar emission pattern. Here we explore recent advancements in single-molecule orientation and localization microscopy (SMOLM), which yields super-resolved images of molecular three-dimensional (3D) orientations, wobble and 3D positions. This advancement opens possibilities to explore the nanoscale organization and conformation of biological molecules as well as to monitor and design local 3D optical fields in nanophotonics. …

Improved Triboelectric Nanogenerator By As-Prepared Lithium Niobate For Energy Harvesting And Sensing Applications, Jahid Inam Chowdhury, Md. Wasikur Rahman, Md Arafat Hossain, Nicholas Dimakis, Mohammed Jasim Uddin

School of Integrative Biological & Chemical Sciences Faculty Publications

Triboelectric nanogenerators (TENGs) have garnered significant research interest due to their ability to harvest mechanical energy efficiently. In this study, we report a TENG composed of polydimethylsiloxane (PDMS) and polyvinyl alcohol (PVA) as triboelectric layers. To enhance charge generation in the PDMS composite polymer, we incorporated lithium niobate (LiNbO3) nanoparticles, leveraging their piezoelectric and ferroelectric properties. The LiNbO3 nanoparticles were synthesized using a solid-state reaction method, resulting in two distinct phases: triclinic LiNbO3 and monoclinic LiNb3O8. Various weight percentages of LiNbO3 and LiNb3O8 nanoparticles were added to the PDMS matrix to optimize power generation. The maximum open-circuit voltage (VOC) and …

Superhydrophilic Porous Coooh Nano-Architecture With Abundant Oxygen Vacancies For Enhanced Urea Electrooxidation At Ampere-Level Current Densities, Wen-Jing Lv, Xiao-Man Tang, Xue-Tong Wang, Wen-Cai Liu, Jian-Wen Zhu, Guo-Jing Wang, Yuan-Zhi Zhu

Journal of Electrochemistry

The conversion of urea-containing wastewater into clean hydrogen energy has gained increasing attention. However, challenges remain, particularly with sluggish catalytic kinetics and limited long-term stability of urea oxidation reaction (UOR). Herein, we report the loosely porous CoOOH nano-architecture (CoOOH LPNAs) with hydrophilic surface and abundant oxygen vacancies (O_v) on carbon fiber paper (CFP) by electrochemical reconstruction of the CoP nanoneedles precursor. The resulting three-dimensional electrode exhibited an impressively low potential of 1.38 V at 1000 mA·cm⁻² and excellent durability for UOR. Furthermore, when tested in an anion exchange membrane (AEM) electrolyzer, it required only 1.53 V at …

Structure Regulation Engineering For Biomass-Derived Carbon Anodes Enabling High-Rate Dual-Ion Batteries, Rui Zhou, Rui Liu, Yun-Nuo Li, Si-Jie Jiang, Tian-Tian Jing, Yan-Song Xu, Fei-Fei Cao

Journal of Electrochemistry

Dual-ion batteries (DIBs) usually use carbon-based materials as electrodes, showing advantages in high operating voltage, potential low cost, and environmental friendliness. Different from conventional “rocking chair” type secondary batteries, DIBs perform a unique working mechanism, which employ both cation and anion taking part in capacity contribution at an anode and a cathode, respectively, during electrochemical reactions. Graphite has been identified as a suitable cathode material for anion intercalation at high voltages (> 4.8 V) with fast reaction kinetics. However, the development of DIBs is being hindered by dynamic mismatch between a cathode and an anode due to sluggish Li^{+ …}

Design And Optimization Of Anode Catalysts For Direct Ethanol Fuel Cells: Advances And Challenges In C-C Bond Activation And Selective Modulation Of The C1 Pathway, Kai-Chi Qin, Meng-Tian Huo, Yu Liang, Si-Yuan Zhu, Zi-Hao Xing, Jin-Fa Chang

Journal of Electrochemistry

Direct ethanol fuel cells (DEFCs) are a promising alternative to conventional energy sources, offering high energy density, environmental sustainability, and operational safety. Compared to methanol fuel cells, DEFCs exhibit lower toxicity and a more mature preparation process. Unlike hydrogen fuel cells, DEFCs provide superior storage and transport feasibility, as well as cost-effectiveness, significantly enhancing their commercial viability. However, the stable C–C bond in ethanol creates a high activation energy barrier, often resulting in incomplete electrooxidation. Current commercial platinum (Pt)- and palladium (Pd)-based catalysts demonstrate low C–C bond cleavage efficiency (

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Redox-Active Monolayers On Ito Prepared By Post-Amidation And Direct Esterification And Their Spectroelectrochemical Characterization, Takamasa Sagara, Sae Nakai, Ryusuke Yofu, Shota Kojin

Journal of Electrochemistry

A redox-active monolayer on an optically transparent electrode constitutes a typical platform for spectroelectrochemical sensing. The necessity for its sophistication arises from the availability of multi-dimensional sensing signals. Simultaneous monitoring of the redox current and color change synchronized with the oxidation state change significantly enhances sensitivity and selectivity. This study aimed to elucidate the modification of an indium tin oxide (ITO) electrode with a viologen monolayer with an ordered orientation. Novel methods were developed to immobilize a viologen molecule bearing a carboxyl group to form assembled monolayers through a condensation reaction using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide with N-hydroxy-succinimide (EDC/NHS). In the two methods …

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO₂ capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Colloidal Quantum Dots: A Path Toward Making Mid-Wave Infrared Sensing A Ubiquitous Technology, Mohammad Mostafa Al Mahfuz

Dissertations

Reducing the size, weight, power consumption, and cost (SWaP-C) of infrared detectors could make infrared sensing more widely accessible. In the critical mid-wavelength infrared (MWIR) spectral range of 3-5 gm, commercially available detectors are limited by the high costs associated with epitaxial growth and hybridization, as well as the need for cryogenic cooling. These factors restrict their use to defense and space applications.

Colloidal quantum dots present a promising material for overcoming these challenges, with wafer-scale monolithic integration and Auger suppression being the key material capabilities to minimize the sensor's SWaP-C. Infrared sensors based on colloidal quantum dots have been …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Encryption With Synchronized Chaos Using Fabricated Cobalt Ferrite Memristors, Kiran Sai Seetala

Doctoral Dissertations

No abstract provided.

Functional Devices Based On Freestanding 2d Materials, Shijue Xu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Two-dimensional (2D) materials have attracted extensive attention in the field of nanoelectronics due to their atomic-scale thickness, high surface-to-volume ratio, tunable electronic properties, and compatibility with low-temperature processing. These characteristics make them highly suitable for the construction of emerging device architectures, particularly in both ionic and electronic devices.

In this work, we investigate the application of 2D materials in two distinct classes of devices: ionically-driven memristors and electronically-dominated metal–semiconductor contacts. For the memristor study, we fabricate heterostructure-based resistive switching devices using h-BN and WSe₂ as active layers. These 2D material-based memristors exhibit stable power consumption loops and high linearity …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}

Ordering Degree Regulation Of Pt2Nico Intermetallics For Efficient Oxygen Reduction Reaction, Chen-Hao Zhang, Han-Yu Hua, Jun-Hao Yang, Qian Zhang, Chang Yang, De-Li Wang

Journal of Electrochemistry

Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction (ORR). Atomic ordered intermetallic compounds (IMC) provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms, thus exhibiting superior electrocatalytic activity and durability. However, quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging. Herein, a series of ternary Pt₂NiCo intermetallic catalysts (o-Pt₂NiCo) with different ordering degree were synthesized by annealing temperature modulation. Among them, the o-Pt …

Performance Of Co2/H2O Co-Electrolysis In A Flat-Tube Solid Oxide Electrolysis Cell Stack Under Air-Free Environment, Xiao-Hui Zhong, Fei Wang, An-Qi Wu, Bei-Bei Han, Jian-Xin Wang, Wan-Bing Guan

Journal of Electrochemistry

This work investigates the transient performance and stability of CO₂/H₂O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell (SOEC) stack. The results show that the transient behavior of the stack with and without blowing gas in the air electrode is almost the same. With a current density of 0.67 A·cm⁻²@750 °C, the stack operated for over 200 h under co-electrolysis conditions with no air blowing, and the voltage drop rate of the stack was approximately 0.203%/100 hours. Microstructure analysis reveals significant loss of Ni particles and formation of an insulating …

Variation Of Membrane Electrode Assembly Catalyst Layer In Unitized Regenerative Fuel Cell, Yollanda Nurcholifah, Dedi Rohendi, Edy Herianto Majlan, Nirwan Syarif, Addy Rachmat, Dwi Hawa Yulianti, Nyimas Febrika S

Journal of Electrochemistry

A unitized regenerative fuel cell (URFC) is a device that may function reversibly as either a fuel cell (FC) or water electrolysis (WE). An important component of this device is the Membrane electrode assembly (MEA). Therefore, this study aimed to compare the performance outcomes of MEA using electrodes with single and three catalyst layers. This study measured Electrochemical Surface Area (ECSA), Electrochemical Impedance Spectroscopy (EIS), X-ray Diffraction analysis (XRD), and X-ray Fluorescence (XRF). Furthermore, the round-trip efficiency (RTE) of the MEA, as well as the performance in FC and WE mode, was measured. In comparison, The ECSA values of Pt-Ru/C …