Electrical and Computer Engineering Commons^™

Combined Experimental And Theoretical Studies On Methane Photolysis At 121.6 Nm And 248 Nm- Implications On A Program Of Laboratory Simulations Of Titan’S Atmosphere, C. Romanzin, E. Arzoumanian, Et. Es-Sebbar, A. Jolly, S. Perrier, M.-C. Gazeau, Y. Bénilan

Dr. Et-touhami Es-sebbar

Methane is, together with N2, the main precursor of Titan’s atmospheric chemistry. In our laboratory, we are currently developing a program of laboratory simulations of Titan’s atmosphere, where methane is intended to be dissociated by multiphotonic photolysis at 248 nm. A preliminary study has shown that multiphotonic absorption of methane at 248 nm is efficient and leads to the production of hydrocarbons such as C2H2 (Romanzin et al., 2008). Yet, at this wavelength, little is known about the branching ratios of the hydrocarbon radicals (CH3, CH2 and CH) and their following photochemistry. This paper thus aims at investigating methane photochemistry …

Intelligibility Of Electrolarynx Speech Using A Novel Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. Following a laryngectomy, some people speak using an electrolarynx which replaces the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the buzzing monotonic sound emitted, the need for a free hand to operate the device, and difficulty experienced by many laryngectomees in adapting to its use. Despite these shortcomings, it remains the preferred method of speech rehabilitation for a substantial minority of laryngectomees. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal …

Temperature-Dependent Photoabsorption Cross-Section Of Cyano-Diacetylene In The Vacuum Uv, N. Fray, Y. Bénilan, M.-C. Gazeau, A. Jolly, M. Schwell, E. Arzoumanian, Et. Es-Sebbar, T. Ferradaz, J.- C. Guillemin

Dr. Et-touhami Es-sebbar

Using synchrotron radiation as a tunable VUV light source, we have measured, for the first time, the absolute photoabsorption cross sections of HC5N with a spectral resolution of 0.05 nm in the region between 80 and 205 nm from 233 to 298 K. The measured cross sections are used to predict the HC5N photodestruction rate in the solar system and to model a transmission spectrum in Titan's atmosphere. Comparing the latter with that acquired by the Ultraviolet Imaging Spectrograph on board the Cassini spacecraft, we have determined an upper limit of 2.7 × 10−5 on the HC5N abundance at 1100 …

Analysis Of Power System Frequency Responses With Hydro Turbines Incorporating Load Shedding, Lin Gao

Lin Gao

As shown in many recent works, the load-frequency behavior can be represented by system frequency response models especially for an islanding process. In this paper, a frequency response model incorporating an under-frequency load-shedding scheme is presented for islanding power system simulations. The model was applied for a realistic power system with hydro power generators. The hydro power generator model parameters were identified and similar responses were observed between the simulations and the accident records. The simulation results showed disadvantages of the primary frequency control systems of hydro power generators at the beginning of the load disturbances. The power system stability …

Irrigation Leak Detection: Using Flow Rate Sensors To Detect Breaks In An Irrigation System, Adam Openshaw, Kalvin Vu

Computer Engineering

This report details the exploration and invention of a mechanism that can detect breaks in an irrigation system. With the ultimate goal of conserving water, we have designed an inexpensive, self sustaining flow rate monitor that can be used to identify anomalies in an irrigation system and wirelessly communicate the status of the system to a base station. Our implementation can also determine the direction of the anomaly based on the nature of the anomaly itself. This means that multiple monitors can be used to pinpoint the location of a break within the system in addition to merely detecting its …

The Applications And Limitations Of Printable Batteries, Matthew Delmanowski

Graphic Communication

This study focuses on the potential applications for printed batteries and how they could affect the printing industry. It also analyzes the main problems associated with manufacturing this technology and what needs to be done to overcome these issues. To find the answers to these questions, two methods of research were used. The first was through the elite and specialized interviewing of Dr. Scott Williams of Rochester Institute of Technology and Professor Nancy Cullins from Cal Poly. The second form of research was a common, yet useful, method called secondary research. This entailed looking at recent written research papers about …

An Adaptive Nonparametric Modeling Technique For Expanded Condition Monitoring Of Processes, Matthew John Humberstone

Doctoral Dissertations

New reactor designs and the license extensions of the current reactors has created new condition monitoring challenges. A major challenge is the creation of a data-based model for a reactor that has never been built or operated and has no historical data. This is the motivation behind the creation of a hybrid modeling technique based on first principle models that adapts to include operating reactor data as it becomes available.

An Adaptive Non-Parametric Model (ANPM) was developed for adaptive monitoring of small to medium size reactors (SMR) but would be applicable to all designs. Ideally, an adaptive model should have …

Gate 3 Grid Connection Group Processing Approach:An Analysis, John Leahy

Msc. in Energy Management

The aim of this project is to analyse the Group Processing Approach (the “GPA”) to renewable generator grid connections, and in particular the Gate 3 process which is the latest round of the GPA that is currently being implemented in the Republic of Ireland, to determine if it is the most effective approach for connecting new renewable generation. Gate 3 is the third series of the GPA for connecting renewable generation to the Irish Electricity grid where applications are processed in groups or batches. The size of the Gate 3 has bee capped at 3,900MW with applicants being selected based …

College Of Engineering Senior Design Competition Spring 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Each student in his or her senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. The senior design project encourages the student to use everything learned in the engineering program to create a practical, real-world solution to an engineering challenge.

A highlight of the year-long senior design project is the senior design competition. This competition, which usually takes place the week before finals each semester, helps focus the senior students on increasing the quality and potential for commercial application for their design projects.

Judges from local industry evaluate the projects on innovation, commercial …

Computer Program And Method For Detecting And Predicting Valve Failure In A Reciprocating Compressor, Ming-Chuan Leu, Jagannathan Sarangapani, Raghuram Puthall Ramesh

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Embodiments of the present invention provide a method implemented by a computer program for detecting and identifying valve failure in a reciprocating compressor and further for predicting valve failure in the compressor. Embodiments of the present invention detect and predict the valve failure using wavelet analysis, logistic regression, and neural networks. A pressure signal from the valve of the reciprocating compressor presents a non-stationary waveform from which features can be extracted using wavelet packet decomposition. The extracted features, along with temperature data for the valve, are used to train a logistic regression model to classify defective and normal operation of …

Determination Of Material Emission Signatures By Ptr-Ms And Their Correlations With Odor Assessments By Human Subjects, Kwanghoon Han

Kwanghoon Han

The objectives of this study were to determine volatile organic compound (VOC) emission signatures of nine typical building materials by using proton transfer reaction-mass spectrometry (PTR-MS) and to explore the correlation between the PTR-MS measurements and the measurements of acceptability by human subjects. VOC emissions from each material were measured in a 50-l small-scale chamber. Chamber air was sampled by PTR-MS to determine emission signatures. Sorbent tube sampling and TD-GC/MS analysis were also performed to identify the major VOCs emitted and to compare the resulting data with the PTR-MS emission signatures. The data on the acceptability of air quality assessed …

Wave Energy Converter Performance Modeling And Cost Of Electricity Assessment, Dmitri Jarocki

Master's Theses

California is experiencing a rapid increase in interest for the potential of converting ocean waves into clean electricity. Numerous applications have been submitted for the permitting of such renewable energy projects; however the profitability, practicability, and survivability have yet to be proven. Wave energy conversion technology has steadily matured since its naissance in the 1970’s, several wave energy power installations currently exist, and numerous plans for commercial power plant are in the works on the shores of multiple continents. This study aims to assess the economic viability of two proposed commercial wave energy power plant projects on the Central California …

Particle Filter With Binary Gaussian Weighting And Support Vector Machine For Human Pose Interpretation, Indah Agustien, Muhammad Rahmat Widyanto, Sukmawati Nur Endah, Tarzan Basaruddin

Makara Journal of Technology

This paper proposes human pose interpretation using particle filter (PF) with Binary Gaussian Weighting and support vector machine (SVM). In the proposed system, particle filter is used to track a human object, then this human object is skeletonized using thinning algorithm and classified using SVM. The classification is to identify human pose, whether it is normal or abnormal behavior. Here particle filter is modified through weight calculation using Gaussian distribution to reduce the computational time. The modified particle filter consists of four main phases. First, particles are generated to predict target’s location. Second, the weight of certain particles is calculated …

A Simple Technique For Surface Area Determination Through Supercritical Co2 Adsorption, Mahmud Sudibandriyo

Makara Journal of Technology

The measurement of specific surface area of porous materials has long been important in physical sciences and is currently growing in importance in applied and environmental science. Numerous systems have been developed for surface area measurement by gas adsorption. Commercial systems are available which can measure a wide range of absolute surface area with relative ease. However, their cost is often prohibitive. In this study, an inexpensive apparatus for surface area measurement has been set up to be used for measuring supercritical adsorption of CO2. The Ono-Kondo Lattice model was used to represent the adsorption isotherm and to determine the …

Software Design Of Mobile Antenna For Auto Satellite Tracking Using Modem Correction And Elevation Azimuth Method, Djamhari Sirat, Muhamad Asvial, Arman Djohan Diponegoro, Himawan Sidharta

Makara Journal of Technology

Software Design of Mobile Antenna for Auto Satellite Tracking Using Modem Correction and Elevation Azimuth Method. Pointing accuracy is important in satellite communication. Because the satellite’s distance to the surface of the earth's satellite is so huge, 1 degree of pointing error will make the antenna unable to send data to satellites. To overcome this, the auto-tracking satellite controller is made. This system uses a microcontroller as the controller, with the GPS as the location indicator of the antenna, a digital compass as the beginning of antenna pointing direction, a rotary encoder as azimuth and elevation censor, and a modem …

Fishing Catch And Catch Rate Assesment Of Mini Trawl, Trapnet And Setnet Fisheries, Muhammad Firdaus

Makara Journal of Technology

Fishing Catch and Catch Rate Assesment of Mini Trawl, Trapnet and Setnet Fisheries. This paper is aimed at assessing fishing catch and catch rate of the dragged gear on shrimp, trapnet, and setnet fisheries in Tarakan. The catch and effort data (number and species) and the fishing time of captured units were used in this qualitative analysis of fishing catch and catch rate to describe catch composition and catch rate from three catch fishery units in Tarakan. The result of the research shows that in the catching operation the dragged gear on shrimp has two main catch targets, which are …

Ontology-Based Automatic Classification For News Articles In Indonesian Language, Prajna Wira Basnur, Dana Indra Sensuse

Makara Journal of Technology

Ontology-Based Automatic Classification for News Articles in Indonesian Language. Searching specific information will be difficult if relying only on query. Choosing less specific queries will result in a lot of irrelevant information fetched by the system. One of the most successful ways to overcome this problem is to perform document classification based on the topic. There are many methods that can be used to conduct such a classification, such as using statistical and machine learning approaches. However, those document classification methods require training the data or learning the documents. In this study, the authors attempted to classify documents using a …

Petroleum Degradation In Soil By Thermophilic Bacteria With Biopile Reactor, Astri Nugroho, Edison Effendi, Yulius Karonta

Makara Journal of Technology

Crude oil degradation has been carried out using biopile reactor in total petroleum hydrocarbon (TPH) concentration of 5%, 10% and 15%. The thermophilic microorganisms used from isolation result and identification are Aeromonas salmonicida, Bacillus pantothenticus, and Stenotrophomonas maltophilia. The biodegradation of biopile reactor is done by various concentrations of TPH, total plate count (TPC), and volatile suspended solid (VSS) per day for 30 days. The biodegradation of kinetic parameter calculated consists of μ, μm, Y, Yt, Yobs, Kd, Ks from TPH concentration decision, and TPC and VSS in every microorganism with t (observation time) of 0 hour to 168 hours. …

Maintenance Activity Planning By Reability Centered Maintenance Ii Method, Rachmad Hidayat, Nachnul Ansori, Ali Imron

Makara Journal of Technology

Maintenance Activity Planning by Reability Centered Maintenance II Method. This research discusses maintenance activity planning using the RCM II method to evaluate failure function risk on compresor screw. The calculation of maintenance time is performed by considering maintenance and repair costs. The risk evaluation result with RPN shows that the critical component that needs to get the main priority in applying maintenance on compresor screw is function disorder on timeworn piston and on the broken outgoing air sponge’s filter that receives RPN 45. The optimum maintenance time calculation is applied on components that undergo scheduled restoration and scheduled discard task …

Ergonomic Analysis Of Ui’S Bicyclesusing Posture Evaluation Index (Pei) Method In Virtual Environment, Erlinda Muslim, Boy Nurtjahyo, Zulkarnain Zulkarnain, Liza Afrinotha

Makara Journal of Technology

Ergonomic Analysis of UI’s Bicycles Using Posture Evaluation Index (PEI) Method in Virtual Environment. This research was conducted to study the ergonomic aspect of University of Indonesia’s bicycles in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as an approach that integrated the results of three methods: lower back analysis (LBA), ovako working posture analysis (OWAS), and rapid upper limb assessment (RULA). The research objective is to evaluate the existing design of University of Indonesia’s bicycles and to determine the most ergonomic redesign which concerns handlebar height and saddle height modification. The result showed that …

Conference Proceedings 3rd International Scientific Conference On “Energy Systems With It” At Alvsjö Fair In Association With Energitinget March 16-17 2010, Dr. Erik Dahlquist, Dr. Jenny Palm

Dr. Erik Dahlquist

2010 “The Energiting” is performed for the 12th time. The International Scientific conference is arranged for the 3rd time. The organisers are Swedish Energy Agency, Mälardalen University and the Research School for Energy Systems with LiU, KTH, UU and CTH. The first topic will be “Energy systems” covering use of renewable energy sources, energy conversion and process efficiency improvement with new technologies, as well as societal aspects of the introduction of new technologies. The second topic is “Energy and IT”. This covers energy and load management, interaction between production, distribution and “consumption”, usage of data for decision support and control, …

Investigation Of Rf Curing Parameters In Resin Infusion Molding, Christopher K. Love

Theses and Dissertations

The purpose of this study is to investigate RF or Radio Frequency energy as a viable alternative to traditional heating methods for the purpose of curing resins used in resin infusion molding, a molding system for polymeric composites. Traditional heating/curing methods include technologies such as room temperature, oven, microwave, infrared, and ultraviolet. Although RF curing provides far more advantages than disadvantages, its implementation into a manufacturing process can be challenging. Specifically, three critical elements must be present in order for RF to function in a manner that is profitable to the manufacturer. Those elements are: (1) the proper generator (voltage …

Solar Power And The Electric Grid, Energy Analysis, Nrel Energy Analysis

Publications (E)

In today’s electricity generation system, different resources make different contributions to the electricity grid. This fact sheet illustrates the roles of distributed and centralized renewable energy technologies, particularly solar power, and how they will contribute to the future electricity system. The advantages of a diversified mix of power generation systems are highlighted.

A Microflow Cytometer On A Chip, Joel P. Golden, Jason Kim, George P. Anderson, Nicole N. Hashemi, Peter J. Howell, Frances S. Ligler

Nastaran Hashemi

A rapid, automated, multi-analyte Microflow Cytometer is being developed as a portable, field-deployable sensor for onsite diagnosis of biothreat agent exposure and environmental monitoring. The technology relies on a unique method for ensheathing a sample stream in continuous flow past an interrogation region where optical fibers provide excitation and collect emission. This approach efficiently focuses particles in the interrogation region of the fluidic channel, avoids clogging and provides for subsequent separation of the core and sheath fluids in order to capture the target for confirmatory assays and recycling of the sheath fluid. Fluorescently coded microspheres provide the capability for highly …

The Carillon And Its Haptic Signature : Modeling The Changing Force-Feedback Constraints Of A Musical Instrument For Haptic Display, Mark Havryliv, F. Geiger, M. Gurtler, Fazel Naghdy, Greg Schiemer

Greg Schiemer

The carillon is one of the few instruments that elicits sophisticated haptic interaction from amateur and professional players alike. Like the piano keyboard, the velocity of a player’s impact on each carillon key, or baton, affects the quality of the resultant tone; unlike the piano, each carillon baton returns a different force-feedback. Force-feedback varies widely from one baton to the next across the entire range of the instrument and with further idiosyncratic variation from one instrument to another. This makes the carillon an ideal candidate for haptic simulation. The application of synthesized forcefeedback based on an analysis of forces operating …

Nrel: A Year In Clean Energy Innovations: A Review Of Nrel's Feature Stories, National Renewable Energy Laboratory

Publications (E)

The National Renewable Energy Laboratory (NREL) is the nation’s primary laboratory for renewable energy and energy efficiency research and development.

NREL’s mission and strategy are focused on advancing the U.S. Department of Energy’s and our nation’s energy goals. The laboratory’s scientists and researchers support critical market objectives to accelerate research from scientific innovations to market-viable alternative energy solutions. At the core of this strategic direction are NREL’s research and technology development competencies. These areas span from understanding renewable resources for energy, to the conversion of these resources to renewable electricity and fuels, and ultimately to the use of renewable electricity …

Scaffold Based In-Vitro Osteodistraction For Bone Tissue Engineering, Cesar Adrian Terrazas

Open Access Theses & Dissertations

Engineering of hard tissues such as bone is a challenge because of the limited ability of the body to heal large defects. Current treatment options, such as employing bone sections from the patient or a deceased donor have been utilized for some time now with various degrees of success. However, these methods still exhibit many limitations such as limited supply and the possibility of transmission of disease.

To address the many limitations of bone grafts, synthetic engineered substitutes have been developed and widely researched for nearly three decades. Generally termed scaffolds, these are matrices that serve the purpose of temporary …

Multidisciplinary Collaborative Model For Complex, Angel Ernesto Delgado

Open Access Theses & Dissertations

Nowadays, most devices with advanced technology require the development of embedded systems with mechanical and electrical components as well as software including more than one discipline. These are devices that are usually complex in terms of composition and functionality and that design must follow a methodology in order to successfully design and launch a device of this nature. Hence, the assembly of a multidisciplinary engineering group is required to carry out such complex devices and develop a fully functional product. The group may also need an expert on the field that can provide guidance and knowledge where needed. This is …

On The Effect Of Hydrodynamic Slip On The Polarization Of A Nonconducting Spherical Particle In An Alternating Electric Field, Hui Zhao

Mechanical Engineering Faculty Research

The polarization of a charged, dielectric, spherical particle with a hydrodynamically slipping surface under the influence of a uniform alternating electric field is studied by solving the standard model (the Poisson–Nernst–Planck equations). The dipole moment characterizing the strength of the polarization is computed as a function of the double layer thickness, the electric field frequency, the particle’s surface charge, and the slip length. Our studies reveal that two processes contribute to the dipole moment: ion transport inside the double layer driven by the electric field and the particle’s electrophoretic motion. The hydrodynamic slip will simultaneously impact both processes. In the …

Electro-Osmotic Flow Over A Charged Superhydrophobic Surface, Hui Zhao

Mechanical Engineering Faculty Research

Bubbles can be trapped inside textured structures such as grooves, forming a superhydrophobic surface. A superhydrophobic surface has a large effective hydrodynamic slip length compared to a smooth hydrophobic surface and holds the promise of enhancing electrokinetic flows that find many interesting applications in microfluidics. However, recent theoretical studies suggested that electro-osmotic flows over a weakly charged superhydrophobic surface

the zeta potential of the surface is smaller than the thermal potential (25 mV) can only be enhanced when liquid-gas interfaces are charged [T. M. Squires, Phys. Fluids 20, 092105 (2008); Bahga et al., J. Fluid Mech. 644, 245 (2010)]. So …