Electrical and Computer Engineering Commons^™

Edge Heterogeneous Hardware Evaluation Based On Real Connected And Autonomous Vehicles (Cavs) Workloads, Mustafa Ahmad

Research Opportunities for Engineering Undergraduates (ROEU) Program 2018-19

There has recently been a wide expansion of hardware to assist in autonomous driving tasks. On this project, we focus on using some state-of-the-art deep learning workloads in connected autonomous vehicle (CAV) scenarios,such as object detection and object tracking to evaluate the heterogeneous hardware.

Three-Phase Motor Drive Using Hall Sensors And Field Oriented Control, Michael Mayberry

Research Opportunities for Engineering Undergraduates (ROEU) Program 2018-19

Permanent magnet synchronous motors (PMSM) are a promising candidate for the push to electrify transportation. They have many benefits over DC motors, however they require advanced control techniques that use accurate rotor position, to achieve optimal operation. Using Field Oriented Control (FOC) and hall sensors allows for a low-cost, reliable solution for PMSM drives.

The current study uses FOCs and hall sensors to achieve a motor drive with high power density, accurate speed control, and a small footprint.

Coordinated Smart Home Thermal And Energy Management System Using A Co-Simulation Framework, Prateek Munankarmi

Electronic Theses and Dissertations

The increasing demand for electricity especially during the peak hours threaten the grid reliability. Demand response (DR), changing the load pattern of the consumer in response to system conditions, can decrease energy consumption during periods of high wholesale market price and also maintain system reliability. Residential homes consume 38% of the total electric energy in the U.S., making them promising for DR participation. Consumers can be motivated to participate in DR programs by providing incentives (incentive-based DR), or by introducing a time-varying tariff for electricity consumption (price-based DR). A home energy management system (HEMS), an automated system which can alter …

Safe And Efficient Intelligent Intersection Control Of Autonomous Vehicles, Qiang Lu

Electronic Theses and Dissertations

In this dissertation, we address a problem of safe and efficient intersection crossing traffic management of autonomous and connected ground traffic. Toward this objective, we propose several algorithms to handle different traffic environments. First, an algorithm that is called the Discrete-time occupancies trajectory (DTOT) based Intersection traffic Coordination Algorithm (DICA) is proposed. All vehicles in the system are Connected and Autonomous Vehicles (CAVs) and capable of wireless Vehicle-to-Intersection communication. The main advantage of DICA is that it enables us to utilize the intersection space more efficiently resulting in less delay for vehicles to cross the intersection. In the proposed framework, …

Operation And Process Control Development For A Pilot-Scale Leaching And Solvent Extraction Circuit Recovering Rare Earth Elements From Coal-Based Sources, Douglas Kweku Addo

Theses and Dissertations--Mining Engineering

The US Department of Energy in 2010 has identified several rare earth elements as critical materials to enable clean technologies. As part of ongoing research in REEs (rare earth elements) recovery from coal sources, the University of Kentucky has designed, developed and is demonstrating a ¼ ton/hour pilot-scale processing plant to produce high-grade REEs from coal sources. Due to the need to control critical variables (e.g. pH, tank level, etc.), process control is required. To ensure adequate process control, a study was conducted on leaching and solvent extraction control to evaluate the potential of achieving low-cost REE recovery in addition …

Single-Degree-Of-Freedom Experiments Demonstrating Electromagnetic Formation Flying For Small Satellite Swarms Using Piecewise-Sinusoidal Controls, Ajin Sunny

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis presents a decentralized electromagnetic formation flying (EMFF) control method using frequency-multiplexed sinusoidal control signals. We demonstrate the EMFF control approach in open-loop and closed-loop control experiments using a single-degree-of-freedom testbed with an electromagnetic actuation system (EAS). The EAS sense the relative position and velocity between satellites and implement a frequency-multiplexed sinusoidal control signal. We use a laser-rangefinder device to capture the relative position and an ARM-based microcontroller to implement the closed-loop control algorithm. We custom-design and build the EAS that implements the formation control in one dimension. The experimental results in this thesis demonstrate the feasibility of the …

Asphalt And Adhesive Flow And Level Control, Kajan V. Moorthy

Electrical Engineering

This project entails the design of a flow control system to manage flow rates of asphalt to maintain constant thickness on the fiberglass sheet. By using the proposed system, the amount of scrap created by extremely thick or thin deposits on the mat would be reduced. The design of the proposed system aims to produce a flowrate of 10 gpm while it is also capable of self-correcting and shutting down when unsafe conditions occur. Selection of various components of the control system took place which included the Allen Bradley PLC and Flex I/O, power supply, radars for level sensor, and …

Optimal Power Flow Control Of Networked Dc Microgrids, Eddy H. Trinklein

Dissertations, Master's Theses and Master's Reports

The US military is moving toward the electrification of many weapon systems and platforms. Advanced weapon systems such as high energy radar, electro-magnetic kinetic weapons and directed energy pose significant integration challenges due to their pulsed power electrical load profile. Additionally, the weapons platforms, including ships, aircraft, and vehicles can be studied as a mobile microgrids with multiple generation sources, loads, and energy storage. There is also a desire to extend the mission profile and capabilities of these systems. Common goals are to increase fuel efficiency, maintaining system stability, and reduce energy storage size as typically required to enable pulsed …

Estimation And Prediction Of The Human Gait Dynamics For The Control Of An Ankle-Foot Prosthesis, Guilherme Aramizo Ribeiro

Dissertations, Master's Theses and Master's Reports

With the growing population of amputees, powered prostheses can be a solution to improve the quality of life for many people. Powered ankle-foot prostheses can be made to behave similar to the lost limb via controllers that emulate the mechanical impedance of the human ankle. Therefore, the understanding of human ankle dynamics is of major significance. First, this work reports the modulation of the mechanical impedance via two mechanisms: the co-contraction of the calf muscles and a change of mean ankle torque and angle. Then, the mechanical impedance of the ankle was determined, for the first time, as a multivariable …

Improvement Of The Material’S Mechanical Characteristics Using Intelligent Real Time Control Interfaces In Hfc Hardening Process, Florentin Smarandache, Luige Vladareanu, Mihaiela Iliescu, Victor Vladareanu, Alexandru Gal, Octavian Melinte, Adrian Margean

Branch Mathematics and Statistics Faculty and Staff Publications

The paper presents Intelligent Control (IC) Interfaces for real time control of mechatronic systems applied to Hardening Process Control (HPC) in order to improvement of the material’s mechanical characteristics. Implementation of IC laws in the intelligent real time control interfaces depends on the particular circumstances of the models characteristics used and the exact definition of optimization problem. The results led to the development of the IC interfaces in real time through Particle Swarm Optimization (PSO) and neural networks (NN) using off- line the regression methods.

Cycle Assist, Tyler Matthews

Williams Honors College, Honors Research Projects

The senior engineering design project presented in the paper that succeeds this, outlines the steps taken to design and implement an electronic bicycle that is able to keep a user’s heart-rate in a selected “intensity zone” though the use of an electronic motor and custom control circuitry. My portion of this project was to allow for safe and consistent power delivery to the rest of the electronics. That is to say, I built a battery pack and battery management system (BMS) to safely supply sufficient power to the rest of the electronics that were required for this project. In order …

Dynamic Voltage Rail Audio Amplifier, Evan Von Duhn, Timothy Oshatiouk, Slavisa Tosanovic, Andrew Cantrell

Williams Honors College, Honors Research Projects

The goal of this project is to create a high-quality, power-efficient audio amplifier. Most modern audio amplifiers use a constant amount of power regardless of the signal that is being amplified. This means that both loud and quiet portions of the audio signal require the same amount of power to amplify. The idea for this high-quality, power-efficient audio amplifier is that the quieter portions of the audio signal can be amplified using less power. This will be achieved by first analyzing the audio signal and controlling the power source based on the signal’s needs. Therefore, louder parts of the audio …

Effect Of Sensor Errors On Autonomous Steering Control And Application Of Sensor Fusion For Robust Navigation, Shuvodeep Bhattacharjya

Dissertations, Master's Theses and Master's Reports

Autonomous steering control is one the most important features in autonomous vehicle navigation. The nature and tuning of the controller decides how well the vehicle follows a defined trajectory. A poorly tuned controller can cause the vehicle to oversteer or understeer at turns leading to deviation from a defined path. However, controller performance also depends on the state–feedback system. If the states used for controller input are noisy or has bias / systematic error, the navigation performance of the vehicle is affected irrespective of the control law and controller tuning. In this report, autonomous steering controller analysis is done for …

Modeling And Control Of Maximum Pressure Rise Rate In Rcci Engines, Aditya Basina

Dissertations, Master's Theses and Master's Reports

Low Temperature Combustion (LTC) is a combustion strategy that burns fuel at lower temperatures and leaner mixtures in order to achieve high efficiency and near zero NOx emissions. Since the combustion happens at lower temperatures it inhibits the formation of NOx and soot emissions. One such strategy is Reactivity Controlled Compression Ignition (RCCI). One characteristic of RCCI combustion and LTC com- bustion in general is short burn durations which leads to high Pressure Rise Rates (PRR). This limits the operation of these engines to lower loads as at high loads, the Maximum Pressure Rise Rate (MPRR) hinders the use of …

Networked Microgrid Optimization And Energy Management, Robert S. Jane

Dissertations, Master's Theses and Master's Reports

Military vehicles possess attributes consistent with a microgrid, containing electrical energy generation, storage, government furnished equipment (GFE), and the ability to share these capabilities via interconnection. Many military vehicles have significant energy storage capacity to satisfy silent watch requirements, making them particularly well-suited to share their energy storage capabilities with stationary microgrids for more efficient energy management. Further, the energy generation capacity and the fuel consumption rate of the vehicles are comparable to standard diesel generators, for certain scenarios, the use of the vehicles could result in more efficient operation. Energy management of a microgrid is an open area of …

Online Learning Of The Spatial-Temporal Channel Variation In Underwater Acoustic Communication Networks, Wensheng Sun

Dissertations, Master's Theses and Master's Reports

Influenced by environmental conditions, underwater acoustic (UWA) communication channels exhibit spatial and temporal variations, posing significant challenges for UWA networking and applications. This dissertation develops statistical signal processing approaches to model and predict variations of the channel and relevant environmental factors. Firstly, extensive field experiments are conducted in the Great Lakes region. Three types of the freshwater river/lake acoustic channels are characterized in the aspects of statistical channel variations and sound propagation loss, including stationary, mobile and under-ice acoustic channels. Statistical data analysis shows that relative to oceanic channels, freshwater river/lake channels have larger temporal coherence, higher correlation among densely …

Mathematical Programming Approach For The Design Of Satellite Power Systems, Allen Flath Iii

Theses and Dissertations--Electrical and Computer Engineering

Satellite power systems can be understood as islanded dc microgrids supplied by specialized and coordinated solar cell arrays augmented by electrochemical battery systems to handle high-power loads and periods of eclipse. The periodic availability of power, the limited capacity of batteries, and the dependence of all mission service on power consumption create a unique situation in which temporal power and energy scarcity exist. A multi-period model of an orbital satellite power system’s performance over a mission’s duration can be constructed. A modular power system architecture is used to characterize the system’s constraints. Using mathematical programming, an optimization problem can be …

Energy Optimization And Coordination Frameworks For Smart Homes Considering Incentives From Discomfort And Market Analysis, Priti Paudyal

Electronic Theses and Dissertations

The electricity demand is increasing with the growing use of electricity-based appliances in today’s world. The residential sector’s electricity consumption share is also increasing. Demand response (DR) is a typical way to schedule consumers’ energy consumption and help utility to reduce the peak load demand. Residential demand management can contribute to reduce peak electric demand, decrease electricity costs, and maintain grid reliability. Though the demand management has benefits to the utility and the consumers, controlling the consumers electricity consumption provides inconvenience to the consumers. The challenge here is to properly address the customers’ inconvenience to encourage them to participate and …

Immunity-Based Framework For Autonomous Flight In Gps-Challenged Environment, Mohanad Al Nuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this research, the artificial immune system (AIS) paradigm is used for the development of a conceptual framework for autonomous flight when vehicle position and velocity are not available from direct sources such as the global navigation satellite systems or external landmarks and systems. The AIS is expected to provide corrections of velocity and position estimations that are only based on the outputs of onboard inertial measurement units (IMU). The AIS comprises sets of artificial memory cells that simulate the function of memory T- and B-cells in the biological immune system of vertebrates. The innate immune system uses information about …

Ict-Enabled Control And Energy Management Of Community Microgrids For Resilient Smart Grid Operation, Mahmoud Saleh

Dissertations and Theses

Our research has focused on developing novel controllers and algorithms to enhance the resilience of the power grid and increase its readiness level against major disturbances.

The U.S. power grid currently encounters two main challenges: (1) the massive and extended blackouts caused by natural disasters, such as hurricane Sandy. These blackouts have raised a national call to explore innovative approaches for enhanced grid resiliency. Scrutinizing how previous blackouts initiated and propagated throughout the power grid, the major reasons are lack of situational awareness, lack of real-time monitoring and control, underdeveloped controllers at both the transmission and distribution levels, and lack …

Intelligent Transportation Systems, Hybrid Electric Vehicles, Powertrain Control, Cooperative Adaptive Cruise Control, Model Predictive Control, Hadi Kazemi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Information obtainable from Intelligent Transportation Systems (ITS) provides the possibility of improving the safety and efficiency of vehicles at different levels. In particular, such information has the potential to be utilized for prediction of driving conditions and traffic flow, which allows us to improve the performance of the control systems in different vehicular applications, such as Hybrid Electric Vehicles (HEVs) powertrain control and Cooperative Adaptive Cruise Control (CACC). In the first part of this work, we study the design of an MPC controller for a Cooperative Adaptive Cruise Control (CACC) system, which is an automated application that provides the drivers …

Real-Time Path Planning In Constrained, Uncertain Environments, Randall Christensen, Robert C. Leishman

Faculty Publications

A key enabler of autonomous vehicles is the ability to plan the path of the vehicle to accomplish mission objectives. To be robust to realistic environments, path planners must account for uncertainty in the trajectory of the vehicle as well as uncertainty in the location of obstacles. The uncertainty in the trajectory of the vehicle is a difficult quantity to estimate, and is influenced by coupling between the vehicle dynamics, guidance, navigation, and control system as well as any disturbances acting on the vehicle. Monte Carlo analysis is the conventional approach to determine vehicle dispersion, while accounting for the coupled …

Sistem Buka Tutup Pintu Otomatis Berbasis Suara, Sinta Ariyanti, Slamet Seno Adi, Sugeng Purbawanto

Elinvo (Electronics, Informatics, and Vocational Education)

Biometric identification is one of the media on the operation of the system of home automation are much sought after.This is because conventional identification such as the use of your PIN, password, and a key card is already not enough reliable, in terms of security and how to operate.Biometrics is essentially an introduction to someone based on the unique personality of each person owned such as facial recognition, fingerprints, voice recognition, the introduction of the retina, and signature.Voice recognition is a process to identify a person by recognizing speech from that person.The purpose of this research is to know the …

Modeling And Simulation Methodologies For Spinal Cord Stimulation., Saliya Kumara Kirigeeganage

Electronic Theses and Dissertations

The use of neural prostheses to improve health of paraplegics has been a prime interest of neuroscientists over the last few decades. Scientists have performed experiments with spinal cord stimulation (SCS) to enable voluntary motor function of paralyzed patients. However, the experimentation on the human spinal cord is not a trivial task. Therefore, modeling and simulation techniques play a significant role in understanding the underlying concepts and mechanics of the spinal cord stimulation. In this work, simulation and modeling techniques related to spinal cord stimulation were investigated. The initial work was intended to visualize the electric field distribution patterns in …

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore

Posters-at-the-Capitol

Piezoelectric materials have the unique ability to convert electrical energy to mechanical vibrations and vice versa. This project takes a stab to develop a reliable computational tool to simulate the vibration control of a novel “partial differential equation” model for a piezoelectric device, which is designed by integrating electric conducting piezoelectric layers constraining a viscoelastic layer to provide an active and lightweight intelligent structure. Controlling unwanted vibrations on piezoelectric devices (or harvesting energy from ambient vibrations) through piezoelectric layers has been the major focus in cutting-edge engineering applications such as ultrasonic welders and inchworms. The corresponding mathematical models for piezoelectric …

Effect Of Wireless Communication Delay On Dc Microgrids Performance, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper investigates the effect of wireless communication technologies latency on the converters and the bus voltage of centrally communication based controlled DC microgrids (MGs) during islanding. A DC microgrid with its communication based control scheme was modeled to show the impact of latency. Simulation results show that the impact may be severe depending on the design, and the operational condition of the microgrid before latency occurs.

Impact Of Communication Latency On The Bus Voltage Of Centrally Controlled Dc Microgrid During Islanding, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Maintaining a sustainable and reliable source of energy to supply critical loads within a renewable energy based microgrid (MG) during blackouts is directly related to its bus voltage variations. For example, voltage variation might trigger protection devices and disconnect DERs within the MG. Centrally controlled MGs (CCMGs) type is dependent on communication. Therefore, it is very important to analyze the impact of communication networks performance degradation, such as latency, on the bus voltage of CCMGs. This paper investigates the effect of wireless communication technologies latency on the bus voltage and performance of centralized DC MGs. Two mathematical models were developed …

A Nonlinear Systems Framework For Cyberattack Prevention For Chemical Process Control Systems, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Recent cyberattacks against industrial control systems highlight the criticality of preventing future attacks from disrupting plants economically or, more critically, from impacting plant safety. This work develops a nonlinear systems framework for understanding cyberattack-resilience of process and control designs and indicates through an analysis of three control designs how control laws can be inspected for this property. A chemical process example illustrates that control approaches intended for cyberattack prevention which seem intuitive are not cyberattack-resilient unless they meet the requirements of a nonlinear systems description of this property.

An Improved Control Algorithm For Ship Course Keeping Based On Nonlinear Feedback And Decoration, Xiaxiao Yao

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Research On Safety Management Of Maritime Autonomous Surface Ships, Kangqun Chen

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.