Electrical and Computer Engineering Commons^™

Sensor Fusion And Non-Linear Mpc Controller Development Studies For Intelligent Autonomous Vehicular Systems, Ahammad Basha Dudekula

Dissertations, Master's Theses and Master's Reports

The demand for safety and fuel efficiency on ground vehicles and advancement in embedded systems created the opportunity to develop Autonomous controller. The present thesis work is three fold and it encompasses all elements that are required to prototype the autonomous intelligent system including simulation, state handling and real time implementation. The Autonomous vehicle operation is mainly dependent upon accurate state estimation and thus a major concern of implementing the autonomous navigation is obtaining robust and accurate data from sensors. This is especially true, in case of Inertial Measurement Unit (IMU) sensor data. The IMU consists of a 3-axis gyro, …

A Comparative Analysis Of Reinforcement Learning Applied To Task-Space Reaching With A Robotic Manipulator With And Without Gravity Compensation, Jonathan Fugal

Theses and Dissertations--Electrical and Computer Engineering

Advances in computing power in recent years have facilitated developments in autonomous robotic systems. These robotic systems can be used in prosthetic limbs, wearhouse packaging and sorting, assembly line production, as well as many other applications. Designing these autonomous systems typically requires robotic system and world models (for classical control based strategies) or time consuming and computationally expensive training (for learning based strategies). Often these requirements are difficult to fulfill. There are ways to combine classical control and learning based strategies that can mitigate both requirements. One of these ways is to use a gravity compensated torque control with reinforcement …

The Picture Fuzzy Distance Measure In Controlling Network Power Consumption, Florentin Smarandache, Ngan Thi Roan, Salvador Coll Arnau, Marina Alonso Diaz, Juan Miguel Martinez Rubio, Pedro Lopez, Fran Andujar, Son Hoang Lee, Manh Van Vu

Branch Mathematics and Statistics Faculty and Staff Publications

In order to solve the complex decision making problems, there are many approaches and systems based on fuzzy theory were proposed.

Developing A Uas-Deployable Methane Sensor Using Low-Cost Modular Open-Source Components, Gavin Demali

Williams Honors College, Honors Research Projects

This project aimed to develop a methane sensor for deployment on an unmanned aerial system (UAS), or drone, platform. This design is centered around low cost, commercially available modular hardware components and open source software libraries. Once successfully developed, this system was deployed at the Bath Nature Preserve in Bath Township, Summit County Ohio in order to detect any potential on site fugitive methane emissions in the vicinity of the oil and gas infrastructure present. The deliverables of this project (i.e. the data collected at BNP) will be given to the land managers there to better inform future management and …

E-Z Door: Hands-Free Front Door Unlocking And Opening Mechanism, Caleb Dyck

Williams Honors College, Honors Research Projects

The E-Z Door Senior Design project is a project with the aim of designing a hands-free system to unlock and open the front door of a home using two-factor security authentication.

The main goal of this project is to help people who may have physical limitations to be able to take advantage of recent technology, making it significantly easier to enter their homes.

Digital, Automated Reactive Target System, Nicholas Haas, Saipranay Vellala, Trandon Ware, Thomas Martin

Williams Honors College, Honors Research Projects

In this era, technology is woven into almost every facet of our leisure activities. Although technology has innovated hobbies ranging from chess to soccer, the art of shooting has been neglected. Unnecessary insufficiency such as bullet ricochets off of mechanical steel targets, ineffective progress tracking, and general inaccessibility to outdoor training facilities are all improvable areas of this sport. The Dynamic Automated Reactive Target (D.A.R.T) System aims to fill some of these gaps and help modernize recreational marksmanship. Modeling the system after a dueling tree will optimize the use of the system and allow for different training models to challenge …

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Design, Construction, Energy Modeling, And Navigation Of A Six-Wheeled Differential Drive Robot To Deliver Medical Supplies Inside Hospitals, Makhluk Hossain Prio

College of Graduate Studies: Theses & Dissertations

Differential drive mobile robots have been the most ubiquitous kind of robots for the last few decades. As each of the wheels of a differential drive mobile robot can be controlled, it provides additional flexibility to the end-users in creating new applications. These applications include personal assistance, security, warehouse and distribution applications, ocean and space exploration, etc. In a clinic or hospital, the delivery of medicines and patients’ records are frequently needed activities. Medical personnel often find these activities repetitive and time-consuming. Our research was to design, construct, produce an energy model, and develop a navigation control method for a …

Implementation Of Radial Basis Function Artificial Neural Network Into An Adaptive Equivalent Consumption Minimization Strategy For Optimized Control Of A Hybrid Electric Vehicle, Thomas P. Harris

Graduate Theses, Dissertations, and Problem Reports (ETD)

Continued increases in the emission of greenhouse gases by passenger vehicles has accelerated the production of hybrid electric vehicles. With this increase in production, there has been a parallel demand for continuously improving strategies of hybrid electric vehicle control. The goal of an ideal control strategy is to maximize fuel economy while minimizing emissions. The design and implementation of an optimized control strategy is a complex challenge. Methods exist by which the globally optimal control strategy may be found. However, these methods are not applicable in real-world driving applications since these methods require a priori knowledge of the upcoming drive …

Pengembangan Prototype Sistem Kendali Kualitas Air Tambak Udang, Avara Ghamaliel Ty, Pramudi Utomo

Elinvo (Electronics, Informatics, and Vocational Education)

The purpose of this article is to describe the analysis, design and performance of prototype shrimp water quality control systems. This tool is expected to simplify and ease the work of shrimp farmers in checking water quality regularly. In its design consists of several steps, namely designing the design of tools, making mechanical systems, programming, and the final stage of testing. The main component that is used as the main control is Arduino Nano. Salinity sensor, DS18b20, and PH-4520C as components for monitoring water quality. 12V DC water pump as a stabilizer of the pH level in the water. Based …

Prototipe Kursi Roda Elektrik Dengan Kendali Joystick Dan Smartphone, Andy Sadewa Junior, Fatchul Arifin

Elinvo (Electronics, Informatics, and Vocational Education)

Wheelchairs are one of the walking aids for people with disabilities and also for people who are unable to move from one place to another. The purpose of this research was to build hardware and software into a wheelchair prototype that can be controlled with joysticks and smartphones and to know its performance. The method in making the final project consists of the stages of need identification, requirements analysis, system design, tool making, tool testing and data collection. Based on the testing that has been done, the results are obtained that the control input from the smartphone through the application …

Sistem Kendali Dan Akuisisi Data Suhu Serta Kelembaban Ruang Budidaya Jamur Tiram (Pleurotus Ostreatus) Berbasis Internet Of Things (Iot), Amalia Rohmah, Satriyo Agung Dewanto

Elinvo (Electronics, Informatics, and Vocational Education)

This study aims to determine the performance of temperature and humidity control technology of the Internet of Things (IoT) automatic oyster mushroom cultivation space. The stages of device development consist of analysis, design, assembly and testing. The design developed combines hardware control, software, and cloud server. This tool consists of 3 main processes, namely input using DHT11 sensors, process and output, namely 220 V AC actuators. There are two tests namely technical and effectiveness. The test results that have been carried out are: (1) the performance test results obtained an average error of 1.44% and a mean humidity of 3.35%, …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

The Challenges Facing Autonomous Vehicles And The Progress In Addressing Them, Garrett Johnson

Senior Honors Theses

Autonomous vehicles are an emerging technology that faces challenges, both technical and socioeconomic. This paper first addresses specific technical challenges, such as parsing visual data, communicating with other entities, and making decisions based on environmental knowledge. The technical challenges are to be addressed by the fields of image processing, Vehicle to Everything Communication (V2X), and decision-making systems. Non-technical challenges such as ethical decision making, social acceptance, and economic pushback are also discussed. Ethical decision making is discussed in the framework of deontology vs utilitarianism, while social acceptance of utilitarian autonomous vehicles is also investigated. Last, the likely economic impact is …

Design, Modeling And Control Of A Two-Wheel Balancing Robot Driven By Bldc Motors, Charles T. Refvem

Master's Theses

The focus of this document is on the design, modeling, and control of a self-balancing two wheel robot, hereafter referred to as the balance bot, driven by independent brushless DC (BLDC) motors. The balance bot frame is composed of stacked layers allowing a lightweight, modular, and rigid mechanical design. The robot is actuated by a pair of brushless DC motors equipped with Hall effect sensors and encoders allowing determination of the angle and angular velocity of each wheel. Absolute orientation measurement is accomplished using a full 9-axis IMU consisting of a 3-axis gyroscope, a 3-axis accelerometer, and a 3-axis magnetometer. …

Bitcoin Price Prediction Using Neural Networks, Vladislav Killiakov

Electrical Engineering

In this project, I will investigate the performance of several major neural network architectures for the task of Bitcoin price prediction. Bitcoin is a cryptocurrency that is recently becoming increasingly more popular, and more widely adopted as a financial instrument. As a result, more efforts have been made in the past several years to model and predict its price. However, to this moment a large portion of work on Bitcoin price modeling was done using statistical or classical machine learning techniques. At the same time, other artificial intelligence based prediction techniques, and specifically neural networks, have not been explored to …

Demand-Side Load Management Using Single-Phase Residential Static Var Compensators, Muhammad Kamran Latif

Boise State University Theses and Dissertations

Distribution systems are going through a structural transformation from being radially-operated simple systems to becoming more complex networks to operate in the presence of the distributed energy resources (DERs) with significant levels of penetration. It is predicted that the share of electricity generation from DERs will keep increasing as the world is moving away from the power generation involving carbon-emission and towards cleaner energy sources such as solar, wind, and biofuels. However, the unstable behavior of the renewables resources presents challenges to the already existing distribution systems. One such problem is when the distribution feeder experience variable power supply due …

Fractional Order State Feedback Control For Improved Lateral Stability Of Semi-Autonomous Commercial Heavy Vehicles, Rasheed Mazen Abdulkader

Graduate Theses and Dissertations

With the growing development of autonomous and semi-autonomous large commercial heavy vehicles, the lateral stability control of articulated vehicles have caught the attention of researchers recently. Active vehicle front steering (AFS) can enhance the handling performance and stability of articulated vehicles for an emergency highway maneuver scenario. However, with large vehicles such tractor-trailers, the system becomes more complex to control and there is an increased occurrence of instabilities. This research investigates a new control scheme based on fractional calculus as a technique that ensures lateral stability of articulated large heavy vehicles during evasive highway maneuvering scenarios. The control method is …

Vision-Based Autonomous Tracking Of A Non-Cooperative Mobile Robot By A Low-Cost Quadrotor Vehicle, Cheikhna Ahmed Tidiane Sy

Electrical and Computer Engineering ETDs

The goal of this thesis is the detection and tracking of a ground vehicle, in particular a car-like robot, by a quadrotor. The first challenge to address in any pursuit or tracking scenario is the detection and unique identification of the target. From this first challenge, comes the need to precisely localize the target in a coordinate system that is common to the tracking and tracked vehicles. In most real-life scenarios, the tracked vehicle does not directly communicate information such as its position to the tracking one. From this fact, arises a non-cooperative constraint problem. The autonomous tracking aspect of …

A Multi-Agent Systems Approach For Analysis Of Stepping Stone Attacks, Marco Antonio Gamarra

Electrical & Computer Engineering Theses & Dissertations

Stepping stone attacks are one of the most sophisticated cyber-attacks, in which attackers make a chain of compromised hosts to reach a victim target. In this Dissertation, an analytic model with Multi-Agent systems approach has been proposed to analyze the propagation of stepping stones attacks in dynamic vulnerability graphs. Because the vulnerability configuration in a network is inherently dynamic, in this Dissertation a biased min-consensus technique for dynamic graphs with fixed and switching topology is proposed as a distributed technique to calculate the most vulnerable path for stepping stones attacks in dynamic vulnerability graphs. We use min-plus algebra to analyze …

An Application Of Sliding Mode Control To Model-Based Reinforcement Learning, Aaron Thomas Parisi

Master's Theses

The state-of-art model-free reinforcement learning algorithms can generate admissible controls for complicated systems with no prior knowledge of the system dynamics, so long as sufficient (oftentimes millions) of samples are available from the environ- ment. On the other hand, model-based reinforcement learning approaches seek to leverage known optimal or robust control to reinforcement learning tasks by mod- elling the system dynamics and applying well established control algorithms to the system model. Sliding-mode controllers are robust to system disturbance and modelling errors, and have been widely used for high-order nonlinear system control. This thesis studies the application of sliding mode control …

Utilizing Trajectory Optimization In The Training Of Neural Network Controllers, Nicholas Kimball

Master's Theses

Applying reinforcement learning to control systems enables the use of machine learning to develop elegant and efficient control laws. Coupled with the representational power of neural networks, reinforcement learning algorithms can learn complex policies that can be difficult to emulate using traditional control system design approaches. In this thesis, three different model-free reinforcement learning algorithms, including Monte Carlo Control, REINFORCE with baseline, and Guided Policy Search are compared in simulated, continuous action-space environments. The results show that the Guided Policy Search algorithm is able to learn a desired control policy much faster than the other algorithms. In the inverted pendulum …

A Legal Study On Challenges Confronted By Unmanned Ships, Minhe Li

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Design And Analysis Of Modular Axial Flux Switched Reluctance Motor, Rochak Shiwakoti

LSU New Orleans Theses and Dissertations

This thesis presents a new modular structure of the axial flux Switched Reluctance Motor (SRM). The design consists of four stator disks with each adjacent disk rotated 30 degrees apart and four rotor disks connected to a common shaft. The proposed design aims to reduce the unwanted radial force, mitigate the torque ripple, and improve the efficiency. The modular structure distributes the radial force and torque strokes along the axial length of the motor, potentially damping the torque pulsation. In addition, the modular structure would deliver the rating power at a lower current level, reducing the overall ohmic loss. Moreover, …

Backstepping Control And Transformation Of Multi-Input Multi-Output Affine Nonlinear Systems Into A Strict Feedback Form, Khalid Salim D. Alharbi

Graduate Theses and Dissertations

This dissertation presents an improved method for controlling multi-input multi-output affine nonlinear systems. A method based on Lie derivatives of the system's outputs is proposed to transform the system into an equivalent strict feedback form. This enables using backstepping control approaches based on Lyapunov stability and integrator backstepping theory to be applied. The geometrical coordinate transformation of multi-input multi-output affine nonlinear systems into strict feedback form has not been detailed in previous publications. In this research, a new approach is presented that extends the transformation process of single-input single-output nonlinear. A general algorithm of the transformation process is formulated. The …

Formally Designing And Implementing Cyber Security Mechanisms In Industrial Control Networks., Mehdi Sabraoui

Electronic Theses and Dissertations

This dissertation describes progress in the state-of-the-art for developing and deploying formally verified cyber security devices in industrial control networks. It begins by detailing the unique struggles that are faced in industrial control networks and why concepts and technologies developed for securing traditional networks might not be appropriate. It uses these unique struggles and examples of contemporary cyber-attacks targeting control systems to argue that progress in securing control systems is best met with formal verification of systems, their specifications, and their security properties. This dissertation then presents a development process and identifies two technologies, TLA+ and seL4, that can be …

Adaptive Physical Human-Robot Interaction (Phri) With A Robotic Nursing Assistant., Sumit Kumar Das

Electronic Theses and Dissertations

Recently, more and more robots are being investigated for future applications in health-care. For instance, in nursing assistance, seamless Human-Robot Interaction (HRI) is very important for sharing workspaces and workloads between medical staff, patients, and robots. In this thesis we introduce a novel robot - the Adaptive Robot Nursing Assistant (ARNA) and its underlying components. ARNA has been designed specifically to assist nurses with day-to-day tasks such as walking patients, pick-and-place item retrieval, and routine patient health monitoring. An adaptive HRI in nursing applications creates a positive user experience, increase nurse productivity and task completion rates, as reported by experimentation …

Hardware Implementation Of Boost Power Factor Correction Converter., Shruti Motilal Deore

Electronic Theses and Dissertations

Nowadays, there has been an increasing demand of unity power factor in electrical power sector. Due to the nonlinear nature of load equipment, switching devices, source voltage and current are out of phase with each other. Many power converters topologies are used for the power factor correction. The boost converter with controller is most common for power factor correction circuits. The controller objective is to maintain the output voltage regulation and input current tracking with source voltage. The voltage ripple present due to the ac component of the current tracking objective, hence instead of ignoring that ripple, it is used …

Design Optimization, Analysis, And Control Of Walking Robots, Wankun Sirichotiyakul

Boise State University Theses and Dissertations

Passive dynamic walking refers to the dynamical behavior of mechanical devices that are able to naturally walk down a shallow slope in a stable manner, without using actuation or sensing of any kind. Such devices can attain motions that are remarkably human-like by purely exploiting their natural dynamics. This suggests that passive dynamic walking machines can be used to model and study human locomotion; however, there are two major limitations: they can be difficult to design, and they cannot walk on level ground or uphill without some kind of actuation.

This thesis presents a mechanism design optimization framework that allows …

Swarm Behavior To Mitigate Rebound In Air Conditioning Demand Response Events, Jason Yasuto Kuwada

Boise State University Theses and Dissertations

Thermostatically Controlled Loads (TCLs) have shown great potential for Demand Response (DR) events. However, it has been commonly seen that DR events using TCLs may cause demand rebound, especially in homogeneous populations. To further explore the potential for DR events, as well as the negative effects, a stability and resilience analysis were performed on multiple populations and verified with agent based modeling simulations.

At the core of this study is an added thermostat criterion created from the combination of a proportional gain and the average compressor operating state of neighboring TCLs. Where DR events in TCLs are commonly controlled by …