Electrical and Computer Engineering Commons^™

Microgrid Assessment And Ml-Based Power System Faults Detection Leveraging Real-Time Co-Simulation, Diego Normando Gandara Mendez

Open Access Theses & Dissertations

The rapid growth of distributed energy resources (DERs) and the increasing reliance on data-driven decision making have reshaped the operational challenges of modern electric power systems. As microgrids become more prominent in distribution networks, utilities require methods that unify planning, control, and real-time situational awareness to ensure resilient operation under faulted or uncertain conditions. The goal of this MSEE thesis is to design and validate a latency-aware ML framework for rapid, reliable fault detection in distribution grids. To achieve the goal of the thesis, there are three specific objectives. Objective 1 evaluates optimized microgrid configurations under varying DER levels and …

Cattlefever: An Automated Cattle Fever Estimation System, Trong Thang Pham, Ethan Coffman, Beth Kegley, Jeremy G. Powell, Jiangchao Zhao, Ngan Le

Electrical Engineering and Computer Science Faculty Publications and Presentations

Farmers face the critical challenge of monitoring cattle well-being for both ethical and economic success, relying on signals like body temperature and facial expressions to assess their animals' health. However, these indicators have traditionally relied on human observation with manual measurement, which is time-consuming and subjective. Despite this clear need, no automated system currently exists for monitoring cattle body temperature, and available datasets remain limited in scope. To address these challenges, we make two key contributions: (i) We introduce CattleFace-RGBT, a novel RGB-Thermal (RGB-T) Cattle Facial Landmark dataset consisting of 2,300 paired RGB and thermal images (4,600 images in total), …

Auction Consensus Algorithm With Loss Mechanism For Decentralized Task Allocation, Jose Rodriguez, Wenjie Dong, Constantine Tarawneh, Qi Lu

Electrical and Computer Engineering Faculty Publications

This paper presents an Auction-Consensus Algorithm with a Loss Mechanism (ACALM), a decentralized task allocation method for multi-robot systems that enhances the existing Consensus-Based Auction Algorithm (CBAA) by incorporating a novel loss propagation mechanism. In contrast to purely greedy bidding strategies, it enables agents to dynamically update task priorities based on the accumulated loss from previously unsuccessful bids. This extended work reduces globally inefficient allocations caused by early suboptimal decisions. The proposed approach is evaluated through large-scale simulations in thousands of randomized scenarios and swarm sizes ranging from 5 to 120 robots. Compared to existing CBAA and GCAA algorithms, ACALM …

Machine Learning For Anomaly Detection In Neural Network Security And Srf Cavities, Hal Ferguson

Electrical & Computer Engineering Theses & Dissertations

This dissertation explores the development and deployment of machine learning approaches to address critical challenges in anomaly detection across two distinct domains: neural network security in federated learning settings and cavity behavior analysis in particle accelerator operations at Jefferson Lab in Newport News, Virginia. Anomaly detection identifies deviations from expected patterns, safeguarding systems in cybersecurity, industry, and research against malicious activities and failures. This dissertation demonstrates how our machine learning approaches enhance detection accuracy and efficiency in both neural network security and industrial applications.

First, we investigate vulnerabilities in deep neural networks deployed in federated learning. Although federated learning preserves …

A Feature-Free Deep Learning Approach For Midair Hand Gesture Recognition From Surface Electromyogram (Semg) Data, Yasir Altaf, Abdul Wahid, Mudasir Manzoor Kirmani

Turkish Journal of Electrical Engineering and Computer Sciences

Midair hand gesture recognition plays a crucial role in applications such as sign language recognition and human-computer interaction, particularly for supporting individuals with partial or complete hearing loss. However, recognizing gestures in midair remains challenging due to the rapid and complex nature of hand movements. To address this, noninvasive techniques like surface electromyography (sEMG)—which captures muscle activity through sensors placed on the skin—have gained attention. sEMG provides rich time-series data that reflect both spatial and temporal muscle dynamics. In this study, we propose a deep learning architecture that combines convolutional neural networks (CNNs) and recurrent neural networks (RNNs) to classify …

Integrated Log Spectrogram Convolutional Neural Network (Ils-Cnn) For Robust Spoken Digit Recognition, Awais Ahmed

Turkish Journal of Electrical Engineering and Computer Sciences

Spoken digit recognition (SDR), a type of supervised automatic speech recognition, is essential for various human-machine interaction applications, including banking operations, dialing systems, price extraction, and airline reservation systems. However, designing an effective SDR system presents several challenges, such as developing labeled audio data, selecting appropriate feature extraction methods, and creating high-performance models. To overcome these challenges, a novel approach for robust spoken digit recognition using an integrated log spectrogram convolutional neural network (ILS-CNN) has been proposed. The proposed work presents an efficient SDR method by taking advantage of a log spectrogram layer directly within the neural network to enhance …

Railway Track Condition Monitoring Based On Sensor Data And Artificial Neural Networks, Ivan Kots, Alina Isaeva, Mark Denisenko, Alexander Sinyukin, Andrey Kovalev

Turkish Journal of Electrical Engineering and Computer Sciences

Monitoring the condition of engineering objects is one of the urgent tasks of industry, construction, and transport infrastructure. This article describes a system for condition monitoring and diagnostics of rail tracks in real time. Compared with other similar studies, the proposed system has the advantages of compactness, usability, scalability and versatility of application. The proposed monitoring system is based on an Nvidia Jetson Nano embedded computing board and also includes inertial sensor modules, a microphone, a geolocation module, communication modules, an SSD storage device, and a battery. The prototype of the diagnostic module is a portable device that can be …

Modeling And Simulation Of Dynamic Energy Management Systems For Smart Buildings, Onur Özel, Ali̇ Rifat Boynueğri̇, Hayri̇ Yi̇ği̇t, Burak Tekgün

Turkish Journal of Electrical Engineering and Computer Sciences

This study presents a dynamic energy management system tailored for smart residential buildings, integrating thermal and electrical models to achieve both natural gas and electricity bill cost reduction. By harnessing wind and solar energy sources, the system aims to meet the diverse energy needs of modern homes. Through load shifting and thermal storage strategies, known as power-to-heat (P2H) approaches, the system ensures efficient renewable energy utilization while maintaining resident comfort. Validation of the proposed system was conducted using real-world data from the Yıldız Technical University Smart Home Laboratory, demonstrating its practical applicability and effectiveness. Results indicate significant reductions in both …

Grey Wolf Optimization Of Pi Controller For Power Management In Wind Farms: A Novel Approach, Anis Feddaoui, Lotfi Farah, Abdelouahab Benretem, Mohammed Abdeldjalil Djehaf

Turkish Journal of Electrical Engineering and Computer Sciences

This study proposes a novel power management strategy for wind farms using a grey wolf optimization (GWO)-based PI controller. The method aims to enhance active and reactive power control in systems employing dou bly fed induction generators. Three control strategies are evaluated—namely, a classical frequency-domain PI controller, an Artificial Neural Network (ANN)-based controller, and the proposed GWO-based PI controller—the last of which represents the main contribution. The classical PI and ANN controllers are included strictly for comparative bench marking. MATLAB simulations demonstrate that the GWO-beased PI controller offers superior dynamic performance, particularly in settling time and overshoot reduction. A power …

Fpga-Based Takagi-Sugeno Fuzzy Controller For Quadrotor Uav Stabilization And Trajectory Tracking, Hocine Khati, Mohamed Amine Nehmar, Arezki Fekik, Mohand Achour Touat, Hand Talem, Rabah Mellah

Turkish Journal of Electrical Engineering and Computer Sciences

This study presents the implementation of a fuzzy logic–based control system on a field-programmable gate array (FPGA) for a quadrotor autonomous aerial vehicle (UAV). The objective is to design and integrate six Takagi–Sugeno fuzzy controllers to regulate roll, pitch, and yaw angles, along with longitudinal, latitudinal, and altitude movements, thereby stabilizing the UAV and enabling it to follow a desired trajectory. Due to the computational complexity of the six controllers, achieving the desired performance requires considerable processing time, which can adversely affect the quadrotor’s mission. Owing to their high processing power and operating frequency, FPGAs enable the control algorithm to …

Performance Analysis Of Ris-Empowered Ofdm-Im Communications Under Weibull Fading And Joint Tx/Rx I/Q Imbalance, Büşra Ceni̇kli̇oğlu, İbrahi̇m Develi̇, Ayşe Eli̇f Canbi̇len

Turkish Journal of Electrical Engineering and Computer Sciences

A modernist technique, reconfigurable intelligent surface (RIS) provides outstanding signal reflection and amplification, making it highly valuable for upcoming communication systems. Besides, a major contributor is index modulation (IM), attaining superior spectral and energy efficiency, and achieving hardware sufficiency. The primary and novel contribution of this work is the derivation of a highly accurate, closed-form approximate expression for the average bit error rate (ABER) of an orthogonal frequency division multiplexing (OFDM)-IM system operating in the complex and challenging environment characterized by joint transmitter/receiver (Tx/Rx) in-phase and quadrature phase imbalance (IQI) and Weibull fading. This essential analytical achievement is facilitated by …

Ai-Driven Optimization Of Wind Energy Distribution In Texas Using Multi-Agent Reinforcement Learning, Waleed Amer, Owolabi Oluwadamilola, Bassey Ogbonnaya

SMU Data Science Review

Abstract. The integration of large-scale wind power into modern electrical grids presents persistent challenges due to variability, curtailment, and compliance with operational constraints. This study proposes a multi-agent reinforcement learning (MARL) framework for optimizing wind energy distribution within the Texas power grid. The system employs three specialized agents—managing wind curtailment, storage utilization, and load adjustments—to collaboratively balance supply and demand under dynamic grid conditions. Using historical operational data from the Electric Reliability Council of Texas (ERCOT), the framework was trained and evaluated on a range of scenarios encompassing both typical and extreme operating conditions. Results demonstrate substantial performance improvements compared …

High Frequency Dc-Dc Converter Design Optimization, Modeling And Control Based-Wbg Technology., Salah Ahmed Abdullah Eltief

Electronic Theses and Dissertations

The performance of DC-DC power converters is a cornerstone of modern electric vehicle (EV) powertrains, directly governing overall system efficiency, size, cost, and reliability. This dissertation presents a comprehensive performance analysis and optimization of DC-DC converter topologies to determine the most suitable design for high voltage EV applications. The evaluation rigorously compares efficiency, power losses, and physical size under a range of harsh operating conditions. A primary objective is to leverage Wide Bandgap (WBG) semiconductors, specifically Silicon Carbide (SiC), to push the performance boundaries of power conversion. While SiC devices are known for their superior material properties, a clear understanding …

Towards Robust Autonomous Systems: Handling Multi-Modal Uncertainties In Gps-Denied Environments, Vivya Kalidindi

Doctoral Dissertations

This dissertation focuses on designing a robust and uncertainty-aware framework for autonomous systems operating in GPS-denied environments, such as indoor infrastructures, underground tunnels, and lunar surfaces. The proposed framework addresses the challenges posed by multi-modal uncertainties, including sensor noise, distributional shifts under adverse conditions, and conflicting decision-making preferences. These challenges compromise the reliability and adaptability of autonomous platforms. To overcome these challenges, the proposed framework adopts a layered architecture that integrates advanced methodologies across the sensing, perception, and decision-making layers. At the sensing layer, an Edge-Kalman Filter combined with a density ratio-based update mechanism is employed to reduce aleatoric uncertainty …

Inverse Design For Generating Initial Conditions In Scientific Simulations, Leslie Horace, Christin Whitton, Vanessa Job, William Jones, Nathan A. Debardeleben

Computing Sciences

We propose a conditional normalizing flow (CNF) surrogate model to solve generative, many-to-one inverse problems in scientific simulations governed by partial differential equations (PDEs) with time-evolving interactions between heterogeneous materials. We present two case studies: electrostatic potential and heat diffusion, which serve as proxy simulations for generating diverse sets of initial conditions that can reproduce an observed output state (transient or steady). Finally, we provide a comprehensive overview of the synthetic datasets, the model specification, each stage of the experimental workflow, evaluation of training performance, and uncertainty quantification for the generated samples.

Advancing Power System Reliability And Security With Efficient And Resilient Graph Neural Network Frameworks, Seyed Hamed Haghshenas

USF Tampa Graduate Theses and Dissertations

Enhancing the reliability and security of smart grids is critical for ensuring their seamless operation and resilience against disruptions. The increasing integration of distributed energy resources, advanced measurement devices, and cyber-physical elements introduces both opportunities and challenges for grid management. While these advancements provide enhanced visibility and operational control, they also expose the grid to vulnerabilities from cyber-physical stresses, such as cyber-attacks, equipment failures, and fluctuating power demands. Traditional methods for reliability assessment and threat detection often rely on model-based approaches that struggle to adapt to the complexity and dynamic nature of modern smart grids. These limitations necessitate novel data-driven …

Maximum Likelihood Symbol Timing Algorithm Based On Cyclic Prefix For Ofdm Systems, Kwame S. Ibwe

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a blind symbol synchronization algorithm is presented for orthogonal frequency-division multiplexing (OFDM) systems, and a timing function based on the redundancy of the cyclic prefix (CP) is introduced. The existing algorithms rely on the prior knowledge of the channel energy distribution i.e. channel power profile. In practical environment the channel power profile is unknown to the receiver and its statistics are expected to be highly changing. Nevertheless, the use of pilot symbols in channel profile estimation reduces efficiency as data subcarriers are used to carry pilots instead of payload. In this paper a timing function that accounts …

Csc36000 - Modern Distributed Computing Assignment, Saptarashmi Bandyopadhyay

Open Educational Resources

This assignment covers standard performance metrics for Distributed Systems and the basics of Multiprocessing for CSC36000 - Modern Distributed Computing at the City College of New York CUNY. It is an interactive coding assignment intended to be executed in a Python notebook.

Multi-Modal Depth Estimation Using Camera And Mmwave Sensors, Alston D. Devero-Belfon

Student Theses

For accurately estimating the depth of environments with varying lighting conditions, reliable methods are limited. By utilizing wireless sensor technology in conjunction with cameras, a wide range of environments can be visualized, and objects within these environments can be tracked and monitored. Such methods offer cost-effective alternatives and provide a more secure, data-at-rest option for individuals with low vision, while also enhancing machine perception. In this work, we develop such a prototype that utilizes wireless sensors and cameras, which act in sync, enabling us to estimate the depth of objects within varying lighting environments to a level that is recognizable …

Large Lithium-Ion Battery Model For Secure Shared E-Bike Battery In Smart Cities, Donghui Ding, Zhao Li, Linhao Luo, Ming Jin, Bin Zhu, Yichen Zhong, Junhao Hu, Peng Cai, Huiqi Hu

Research Collection School Of Computing and Information Systems

Electric bikes powered by lithium-ion batteries are increasingly used in smart cities to promote sustainable mobility and efficient delivery services. However, limited battery range and slow plug-in charging remain key challenges. Shared electric bike battery systems, facilitated by battery swapping stations, offer a promising solution by enabling quick and efficient battery replacements. However, their success hinges on accurate anomaly detection, battery health estimation and remain range prediction. These tasks remain challenging due to data scarcity, battery diversity and environmental variability. Here we show that a large-scale lithium-ion battery model trained on over ten million battery time series data enables robust …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

Investigating Resilience Of Cyberattack Detection Using Lyapunov-Based Economic Model Predictive Control To Data Poisoning, Helen Durand, Akkarakaran Francis Leonard

Chemical Engineering and Materials Science Faculty Research Publications

Cyberattacks may be performed on process control systems due to their integration of networking and computing with physical systems. Prior work in our group has developed detection strategies for nonlinear systems under sensor, actuator, and combined sensor and actuator attacks which can ensure, under characterizable conditions, that attacks can be detected before they cause safety issues. However, this work did not take into account the potential that an attacker could attempt to provide data to a process that causes an attack to remain undetected but that also is consistent with different process dynamics than those which the process has. This …

Response Of Dynamic Processes With Control Implemented On A Noisy Quantum Computer, Shilpa Narashimhan, Dominic Messina, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

A major challenge to determining the applicability (and potential outperformance over classical computers) of a quantum computer (QC) within chemical manufacturing processes is quantum noise. Computations by a QC are error-prone due to the influence of quantum noise inherent to the hardware. Errors in control inputs may destabilize a chemical process and lead to unsafe conditions for manufacturing personnel and the environment. The response of a process with control implemented on a QC to errors due to noise must be investigated thoroughly. In this work, the impacts of control input errors due to quantum noise on a process are modeled …

Heuristic Strategies For Process Stabilization Using Proportional Control Implemented By A Noisy Quantum Simulator, Keshav Kasturi Rangan, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Processing and storage demands of industrial processes are causing fields such as optimization, scheduling, and control to assess the effectiveness of quantum devices in their applications. A key objective of control systems is to ensure process safety. This paper focuses on the potential of quantum devices to compute control inputs that maintain system safety despite sources of nondeterminism inherent to currently available quantum devices (quantum noise). In our previous work, we employed a quantum simulator to assess whether a quantum implementation of a proportional (P) control law could stabilize a single-input/single-output system under quantum noise approximated from a real quantum …

Tools To Design Algorithms For Implementing Control Over Quantum Computers, Shilpa Narashimhan, Jihan Abou Halloun, Kip Nieman, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computers (QCs) may find future applications within control systems that operate manufacturing processes. For application within control engineering, quantum algorithm development must be led by control engineers. However, control engineers may face challenges in designing quantum algorithms for control engineering problems. In this work, we provide several path-finding studies that leverage engineering tools such as optimization, encryption, and computational "short-cuts" toward making algorithm design for QC easier for control engineers.

Autonomous Uav Swarm Formation Utilizing Gradient-Driven Contour Mapping For Radiation Source Localization, Edgar Amalyan

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis presents a drone swarm for radiation mapping to aid source localization. The Department of Energy advocates employing UAVs for this task, but existing approaches remain inefficient and impractical in real-world scenarios. Three custom drones are built and flight-tested. A control algorithm to follow a contour, a constant-intensity path, is designed using a gradient fit. By knowing the source’s direction, the drone swarm can fly in the optimal trajectory at every step, leaving nothing to assumption. A program is created that implements formation flight and autonomous navigation. It is tested via a software-in-the-loop simulation utilizing radiation sources and detectors …

Land8fire: A Complete Study On Wildfire Segmentation Through Comprehensive Review, Human-Annotated Multispectral Dataset, And Extensive Benchmarking, Anh Tran, Minh Tran, Esteban Marti, Jackson Cothren, Chase Rainwater, Sandra Eksioglu, Ngan Le

Electrical Engineering and Computer Science Faculty Publications and Presentations

Early and accurate wildfire detection is critical for minimizing environmental damage and ensuring a timely response. However, existing satellite-based wildfire datasets suffer from limitations such as coarse ground truth, poor spectral coverage, and class imbalance, which hinder progress in developing robust segmentation models. In this paper, we introduce Land8Fire, a new large-scale wildfire segmentation dataset composed of over 20,000 multispectral image patches derived from Landsat 8 and manually annotated for high-quality fire masks. Building on the ActiveFire dataset, Land8Fire improves ground truth reliability and offers predefined splits for consistent benchmarking. We evaluate a range of state-of-the-art convolutional and transformer-based models, …

Ev Charging Management In A Real-Time Optimization Framework Considering Operational Constraints, Hilmi Cihan Güldorum, Ayşe Kübra Erenoğlu, İbrahim Şengör, Barry P. Hayes, Ozan Erdinç

Department of Computer Science Publications

The electrification of transportation plays a central role in the decarbonization of energy systems. Although electric vehicles (EVs) are expected to reduce energy related emissions, the increasing demand imposed by large scale EV adoption presents serious challenges for distribution systems (DSs), which were not originally designed to accommodate such loads. This study proposes a mixed integer quadratically constrained programming (MIQCP) framework to optimize the operation of an EV parking lot (EVPL) under DS constraints. The model compares three widely adopted objective functions: minimization of active power loss, charging cost, and uncontrolled charging impact, which is represented by minimizing the total …

Study Of Ai Applications In Biomedical Data Acquisition, Communication, And Analysis: Cest Mri Acceleration And Ecg Transmissions, Adarsha Bhattarai

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation investigates the application of artificial intelligence in biomedical data acquisition, communication, and analysis to advance neurological research and to enable the early detection of cardiovascular conditions. Despite significant advances in imaging and physiological modalities, challenges persist. Imaging modalities, such as the chemical exchange saturation transfer magnetic resonance imaging (CEST MRI) technique are challenged by a prolonged data acquisition time and high operational costs. In addition, physiological modalities such as electrocardiogram (ECG) sensors face constraints in providing uninterrupted signal monitoring which is crucial for the timely detection of premature cardiac abnormalities. The primary goal of this work is to …

Input Structure Based Optimization For Privacy Preserving Ai Systems, Feng Yizhou

Electrical & Computer Engineering Theses & Dissertations

As Artificial Intelligence (AI) systems become increasingly integrated into critical domains, ensuring privacy-preserving model design and system deployment has become a pressing priority. Safeguarding both sensitive user data and proprietary model parameters is critical throughout the AI model and system, from data acquisition and pre-processing to model inference and deployment. However, existing privacy-preserving frameworks face several limitations, including fragmented data ownership, incomplete protection across system stages, substantial computational overhead, and poor scalability to modern architectures such as large language models. This dissertation explores a unifying optimization strategy centered on input structure design to address these challenges. The core idea is …