Electrical and Computer Engineering Commons^™

Review On Capacity Degradation Mechanisms And Lifetime Prediction Of Energy Storage Li-Ion Battery, Ma Yue, Chen Yanqiao, Wang Chu, Wang Xianwen, Liu Hui, Chen Yifei, Chen Lai, Yan Kang, Su Yuefeng

Dianchi(Changsha)

No abstract provided.

Opportunities And Challenges Of Cross-Border E-Commerce In Li-Ion Batteries, Ma Jingjing, Chen Xianyi

Dianchi(Changsha)

No abstract provided.

Robust Real-Time Uav Target Tracking With Onboard Vision-Based Yaw Control, Rylan Malarchick, Jose Castelblanco, Enrique Amaya, Carmen Dimario, Graysen Brinkman, Chirag Kumar, Kiwon Yoon, Sajid Berhane

Beyond: Undergraduate Research Journal

Autonomous tracking of agile unmanned aerial vehicles (UAVs) presents significant challenges for real-time perception and control systems. This work presents AIRHOUND (Autonomous Intelligent Rotorcraft for Hostile Object Unified Navigation and Detection), a UAV platform implementing vision-based yaw tracking through a modular ROS2 software architecture. The system employs YOLOv8 object detection optimized with NVIDIA TensorRT for embedded deployment on an NVIDIA Jetson Orin companion computer. Detected targets are processed through a geometric tracking module that converts pixel coordinates to angular yaw errors using pinhole camera intrinsics, with a proportional controller generating rate-limited yaw commands. These commands are streamed to a PX4 …

Universal Communications Module: Converting Ieee2030.5 Xml Files To Ansi/Cta-2045, Wyatt Bilodeaux

University Honors Theses

The goal of this thesis is to discuss the method and organization of the Universal Communication module capstone project. This project was part of the Portland State University Electrical engineering degree program. While this thesis is part of the University honors curriculum. This thesis goes into detail about team structure and how a 9 person engineering capstone project was managed and organized. It looks at how we broke down the project into sections to be able to properly distribute our resources. This was one of the earliest and most important challenges that this capstone team had to tackle. This was …

Integration Of Robotic Arm And Conveyor With Programmable Logic Controller, Drake A. Small

Master's Theses

To meet new curriculum demands brought on by Cal Poly's upcoming switch to semesters, a new, cross-disciplinary lab module was developed for EE 435 (Industrial Power Control and Automation). The module emphasizes career-applicable skills, preparing students for the field of controls engineering within the manufacturing industry. These skills include robotic control, computer networking and configuration, and embedded systems. The work focused on integrating a collaborative robot arm to pick-and-place boxes on a conveyor. A myCobot 320 Pi and an Ultimation Powered Roller MDR Conveyor were integrated with the existing PLC system using Modbus RTU and EtherNet/IP communication protocols, respectively. A …

A Study On Quantization And Hardware Cost Tradeoffs In A 5g Nr Ldpc Decoder On Fpga, Giancarlo Acosta

Master's Theses

The fixed-point implementation of a 5G New Radio LDPC decoder forces a tradeoff between precision and hardware cost, governed by the variable node word length W_L, the check node message width W_R, and the normalized min-sum correction factor α. This thesis characterizes how these three parameters affect both error correction performance and FPGA resource utilization for an LDPC decoder on an established LDPC decoder architecture. A bit-accurate MATLAB core model records bit error rate (BER) and frame error rate (FER) while a verified HDL Coder model generates synthesizable VHDL for Vivado synthesis, and both are swept …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Solving Linearly Constrained Quadratic Programs Using Field Programmable Analog Arrays, Tyler Wynn, Alonzo Arroyo

Electrical Engineering

This paper presents a field-programmable analog array (FPAA) implementation for solving linearly constrained quadratic programs (LCQPs) directly in the analog domain. The solver is based on a continuous-time primal-dual control architecture with integral action, anti-windup compensation, and a piecewise-linear nonlinearity for enforcing affine inequality constraints. A switched-capacitor implementation using three AN231E04 FPAAs is developed, and coefficient scaling methods are introduced to keep internal and output signals within the voltage limits of the hardware. A global scaling factor is used to reduce internal signal excursions, while solution-space scaling is shown to modify the implemented optimization coefficients and alter the local closed-loop …

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …

Lora Networking Hardware Reference Designs For Terrestrial And Low-Earth-Orbit Communications, Kevin Nottberg

Master's Theses

The work presented here demonstrates a highly robust and tested LoRa networking hardware reference design to meet the needs of the embedded networking company OWL Integrations. The hardware presented integrated a unique combination of features and design choices. The detailing of its unique design is potentially of use to others for use in fielded battery powered terrestrial sensor networking hardware utilizing LoRa. Also, the terrestrial hardware presented is shown to have the capability to support command and control (C2) LoRa links in low-earth orbit beyond terrestrial systems. The design presented has a more U.S. centric component bill-of-materials (BOM), with the …

Design And Parametric Study Of A Mems-Based Reservoir Computer For Reinforcement Learning, Andrew P. Carr

Master's Theses

Single-node reservoir computing (RC) is a hardware-efficient approach to machine learning, leveraging the dynamics of physical systems. In this work, two reinforcement learning algorithms, Q-learning and Proximal Policy Optimization (PPO), are applied to a simulated micro-electro-mechanical system (MEMS)-based reservoir computer to solve both discrete and continuous control tasks. MEMS-based reservoirs are low-power, compact, and their natural frequencies (kHz to MHz) pair well with real-time control loops. To explore the relationship between reservoir dynamics and learning performance, a parametric study is conducted on two reservoir hyperparameters, reservoir size and neuron separation, using CartPole-v1 and MountainCar-v0. The RC successfully learns multiple tasks …

Enabling Ml/Ai In 6g And Future Wireless Communication With Privacy Preservation, Mec Offloading And Quantum Computing, Changshi Zhou

Dissertations

The forthcoming sixth-generation (6G) and future wireless networks are envisioned to support an unprecedented range of services, delivering ultra-low latency, massive connectivity, and intelligent real-time responsiveness. These capabilities will enable emerging applications such as extended reality (XR), autonomous vehicles (AVs), industrial robotics, and the Internet of Things (IoT) to reach their full potential. Achieving this vision requires the integration of enabling technologies such as artificial intelligence and machine learning (AI/ML) and quantum computing, which are poised to play central roles in shaping the landscape of wireless communication systems.

In AI-native, data-driven, and computing-centric 6G networks, ML models will be deeply …

Holistic Dram Enhancements: From Intrinsic In-Memory Operations To Robust Security Mechanisms, Ranyang Zhou

Dissertations

Dynamic Random-Access Memory (DRAM) is both the performance bottleneck and a critical security boundary of modern computing systems. Its physical properties make it an attractive substrate for near-data computation—yet those same properties expose it to disturbance-based hardware attacks. This dissertation argues that these two dimensions are not independent: the architectural choices that make DRAM efficient also reshape its threat landscape. Addressing both requires a unified approach to memory architecture and security co-design.

The first part of this dissertation attacks the memory wall through four processing-in-DRAM (PIM) frameworks. ReD-LUT and LT-PIM unify lookup-table arithmetic with charge-sharing logic, achieving up to 37.8x …

Deep Learning Approaches For Ctenophore Identification And Tracking, Anagha Bharadwaj

Theses

Ctenophores are translucent marine organisms with nearly invisible tentacles and pose significant challenges due to their transparent morphology and ambiguous structural features. This research addresses the classification and tracking of these organisms and evaluates the performance of current computer vision models under sparse-data environments.

A dataset from the NJIT Life History Lab consisting of microscopic laboratory videos and photographs of different growth stages is used to train and assess a number of convolutional neural network designs, including VGG16, ResNet, BioCLIP2, YOLO, and DeepLabCut. Additionally, a web-based interface is developed to evaluate expert-labeled ground truth with the model's performance.

The findings …

Retinomorphic Mid-Wave Infrared In-Sensor Processing Engine: Device-To-Architecture Co-Design, Hemalatha Nagaraju

Theses

Conventional frame-based CMOS image sensors acquire full-frame pixel data at discrete time intervals, resulting in substantial spatial redundancy and loss of temporal information between frames. The repeated conversion and transfer of redundant pixel data increases bandwidth and power consumption in machine vision systems. Retinomorphic sensing architectures address these limitations by enabling programmable, analog-domain processing directly at the sensor interface. A compact behavioral model of the PbSe device is developed in HSPICE based on calibrated TCAD simulation data to capture gate-controlled photocurrent modulation under varying illumination and gate bias conditions. Error analysis is performed to quantify the deviation between TCAD-generated photocurrent …

Decision Making At Triage Classification Using Svm With Smote Technique, Mehanas Shahul, Pushpalatha Kp

Northeast Journal of Complex Systems (NEJCS)

The efficient functioning of triage gates in overcrowded emergency departments (EDs) occurs in the context of the complex adaptive system (CAS) framework, where diverse system elements – patients, medical personnel, resources, patients’ inflow patterns, and patients themselves – simultaneously and dynamically influence the decision process. This study addresses the automated incorporation of machine learning triage algorithms as part of the system triage process to support automated classified risk-level recognition based on a limited set of vital signs. Patients are dynamically subsumed under high and low-risk categories enhanced by sensitivity, which enables optimal diagnosis and triage response to the critical clinician …

The Impact Of Optimization Approximation Algorithms On The Performance Of The Bht-Qaoa, Ali Al-Bayaty, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

This article investigates the performance impact of five classical optimization approximation algorithms on our previously introduced quantum search algorithm, termed the Boolean–Hamiltonians Transform for Quantum Approximate Optimization Algorithm (BHT-QAOA), to effectively search for all best-approximated solutions for Boolean-based problems. These optimization approximation algorithms are BFGS, L-BFGS-B, SLSQP, COBYLA, and COBYQA. Their performance impact is evaluated and compared using two proposed performance metrics—(i) the final number of function evaluations (the lower numbers denote the best optimization approximation algorithms) and (ii) the final quality of qubit measurements (the higher values indicate all best-approximated solutions were found for a problem). Arbitrary classical Boolean …

Quantum Control Protocols For Robust Quantum Computing, Leeseok Kim

Electrical and Computer Engineering ETDs

The fundamental goal of quantum computing is to precisely control quantum systems to perform meaningful tasks, including implementing high-fidelity quantum gates for reliable quantum computation and accurately simulating complex quantum many- body dynamics. In this dissertation, we develop improved quantum control protocols for three distinct objectives, quantum error suppression, quantum optimal control, and analog quantum algorithms, achieving performance beyond standard approaches. First, we introduce new dynamical decoupling protocols, including both determin- istic and randomized constructions, that can substantially outperform conventional deterministic sequences. We then extend the randomized approach to dynamically corrected gates. Second, we propose a randomized quantum optimal control …

Alternative Positioning, Navigation, And Timing In Global Navigation Satellite System Denied Environments, Joshua R. Atencio

Electrical and Computer Engineering ETDs

Global Navigation Satellite Systems (GNSS) provide the majority of critical positioning, navigation, and timing (PNT) services for civilian, commercial, and military applications. However, GNSS is vulnerable to service denial from spoofing and jamming from adversaries and environmental obstruction. These vulnerabilities highlight the need for resilient Alternative PNT (APNT) methods. This dissertation investigates APNT frameworks operating in GNSS denied environments. We develop coalition formation and matching theoretic models that allow users APNT services from anchor nodes under resource constraints and in adversarial or emergency conditions. The proposed frameworks optimize positioning accuracy, network utility, and system stability while accounting for geometric dilution …

A Descriptive Analysis Of Plant Leaf Disease Detection Using Machine Learning And Deep Learning Models: A Systematic Review, Arzoo Chamoli, Anuj Kumar

Turkish Journal of Electrical Engineering and Computer Sciences

Plant leaf disease detection (PLDD) is a growing active research area with burgeoning practical applications across various sectors such as agricultural monitoring, food security, and environmental conservation. Accurate segmentation and classification of plant leaf diseases remains a key challenge in the field of plant leaf disease prediction. The challenge demands automated methods for the plant disease identification because it needs to develop better crop management systems, which will boost agricultural production. In this article, we provide a systematic review of various machine learning (ML) and deep learning (DL) methods extensively used for PLDD. The review strategy follows a formal protocol, …

Classification Of Hif Detection In Nev Profile Using Wavelet Transform And Convolution Neural Network, Abdul Hafiz Kassim, Mohd Abdul Talib Mat Yusoh, Aster Smith Valentinie Wilson Nottelmarc, Ahmad Farid Abidin, Sim Sy Yi, Daw Saleh Sasi Mohammed

Turkish Journal of Electrical Engineering and Computer Sciences

High impedance faults (HIFs) present a critical challenge in power systems due to their subtle signal characteristics, which often remain undetected by conventional protection methods. These faults typically do not produce significant phase disturbances, making reliable detection difficult. However, analysis of the neutral-to-earth voltage (NEV) profile under fault conditions provides a promising alternative for fault identification. Existing approaches for detecting and classifying HIFs using NEV signals remain limited and may result in inaccurate maintenance decisions. This paper proposes a fault classification framework for multiple fault types, including HIF, three-phase fault, three-phase fault to ground, double line, double line to ground, …

Complex-Valued Convolutional Neural Network With Time-Frequency Representation For Electrocardiogram-Based Arrhythmia Detection, Kajeeth Kumar Gurusamy, Muthurajkumar Sannasy

Turkish Journal of Electrical Engineering and Computer Sciences

This research proposes an end-to-end procedure for arrhythmia detection based on electrocardiogram (ECG) signals using complex-valued convolutional neural network (CVCNN) incorporated with time-frequency representation. The proposed model leverages complex numbers to capture amplitude and phase information that enhances the ability of the model for detecting time-frequency variation in cardiac signals. First, signal preprocessing techniques---including normalization, wavelet denoising, and R-peak detection---are applied. Subsequently, the model extracts complex features from raw ECG data by employing the Hilbert transform to derive the analytic signal and the short-time Fourier transform (STFT) to generate a time–frequency representation. The proposed CVCNN framework effectively learns spatial-temporal features …

Adapting Independent Large-Scale Pretrained Models For Human Action Recognition, Selen Pehli̇van

Turkish Journal of Electrical Engineering and Computer Sciences

Transferring knowledge from large-scale, independently pretrained image and text models to video understanding requires addressing several challenges, including maintaining generalization capabilities of models, integrating them into multimodal architectures, and fine-tuning with temporal dynamics. This study evaluates the effectiveness of parameter-efficient fine-tuning (PEFT) techniques in transferring pretrained knowledge from two independent models for video action recognition within a simple, streamlined multimodal fusion pipeline. Specifically, we adapt CLIP as the text branch and DINOv2 as the image branch, keeping both backbones frozen to preserve their pretrained robustness, while introducing lightweight, task-specific modules to adapt and fuse the branches with temporal dynamics. A …

Adaptive Backstepping Nonsingular Fast Terminal Sliding Mode Control For Robotic Manipulators Based On Disturbance Observer, Xin Zhang, Xu Wang

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents an adaptive backstepping nonsingular fast terminal sliding mode controller integrated with a nonlinear disturbance observer to achieve precise trajectory tracking of robotic manipulators subject to model uncertainties and unknown time-varying disturbances. A dead-zone–based adaptive gain mechanism is introduced to dynamically adjust the control gain according to the deviation of the sliding surface, thereby enhancing robustness and reducing chattering. The proposed reaching law ensures fast, nonsingular, and adaptive convergence, suppressing high-frequency oscillations without compromising stability and the nonlinear disturbance observer enables real-time estimation and compensation of modeling errors, friction, and external disturbances for superior rejection. The semiglobal uniform …

Chaotic Artificial Bee Colony-Optimized Stacking Ensemble For Robust Multifault Diagnosis Of Wind Turbines, Veilraj Revathi, Solaimalai Jeyadevi, Madasamy Sudalaimani

Turkish Journal of Electrical Engineering and Computer Sciences

The complex electromechanical structure of wind turbines, along with harsh operating conditions, poses significant challenges for precise and robust fault diagnosis. To address this challenge, an ensemble multifault diagnostic framework based on an adaptive chaotic artificial bee colony (C-ABC)-optimized support vector machine (SVM) and gradient boosting machine (GBM) is proposed. In the proposed framework, data redundancy and overfitting are reduced through a two-stage hybrid filter-transformer-based feature reduction approach using ReliefF, followed by Principal Component Analysis. The chaos function of the proposed C-ABC maintains an adaptive balance between the exploration and exploitation phases, thereby preventing premature convergence, which is a common …

Multiobjective Optimization Framework For Renewable Energy Iot Networks Balancing Security, Energy Efficiency, And Communication Reliability, Muhammad Hjouj Btoush, Ashraf S. Mashaleh, Amjad Gawanmeh

Turkish Journal of Electrical Engineering and Computer Sciences

The deployment of Internet of things (IoT) networks powered by renewable energy sources presents unique challenges in balancing security requirements, energy efficiency, and communication reliability. This paper presents a comprehensive multiobjective optimization framework for secure renewable energy IoT nodes that addresses fundamental trade-offs between these competing objectives. We develop a mathematical model incorporating energy harvesting dynamics, security protocols, and communication performance metrics across various environmental scenarios. The proposed framework employs a modified NSGA-II algorithm to identify Pareto-optimal configurations for different deployment contexts. Through extensive simulation analysis, we demonstrate that hybrid energy sources (solar-wind combinations) with lightweight security protocols achieve optimal …

Accurate Diagnosis Of Diseases By A Novel Ai Pipeline Based On Feature Extraction, Feature Ranking, And Feature Selection From Medical Images, Tuğba Nur Bozkurt, Mehmet Emi̇n Yüksel

Turkish Journal of Electrical Engineering and Computer Sciences

The rapid growth of the global population has led to a substantial increase in the number of patients, while the availability of healthcare professionals has not expanded at a comparable rate. This imbalance highlights the urgent need for efficient and reliable computer-aided decision support systems that can reduce clinical workload while maintaining high diagnostic accuracy. In this study, a novel and systematically integrated artificial intelligence-based pipeline is proposed for medical image classification, combining statistical significance-driven feature ranking with evolutionary feature selection in a unified framework. The proposed pipeline consists of four sequential stages: feature extraction, ranking, selection, and classification. Features …

Predictive Current Control Approach For Grid-Integrated Multifunctional Converter Under Source And Load Disturbances, Ravi Kumar Majji, Tirumalasetty Chiranjeevi, Chilukoti Varaha Narasimha Raja, Nagulapati Kiran

Turkish Journal of Electrical Engineering and Computer Sciences

This paper discusses and presents a model predictive control (MPC)-based predictive current control technique for a solar photovoltaic (PV)-integrated grid system during dynamic operation. This control technique employs extension pq (EPQ) theory to estimate reference currents and utilizes an MPC framework for tracking reference currents. Various MATLAB/Simulink simulations were conducted for solar PV generation (source disturbances) and dynamic loading. The results of the OPAL-RT OP4510 real-time simulation are also presented. A multifunctional grid-integrated converter (MFGC) integrates solar active power into the utility grid while achieving unity power factor, reactive power compensation, current balancing, and harmonic suppression. EPQ optimizes mathematical calculations, …

Visual Interpretability Of Multimodal Tissue Perfusion Classification Using Grad-Cam And Saliency Maps, Metehan Zorluoglu

UNLV Theses, Dissertations, Professional Papers, and Capstones

Accurate identification of the tissue perfusion phase from hand images can aid doctors in decision-making with non-invasive techniques. The present study proposes a multimodal deep learning model for classifying the tissue perfusion phase using infrared, thermal, and visible spectrum images of the human hand. The proposed model consists of various preprocessing techniques such as manipulation, homography alignments, and masking. The significant contribution of this thesis is the interpretability analysis of deep learning models, achieved through the analysis of saliency maps and the Gradient-weighted Class Activation Mapping (Grad-CAM) methods. The purpose of this method is to find out how the convolutional …