Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Catalysis and Reaction Engineering

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 721 - 750 of 785

Full-Text Articles in Electrical and Computer Engineering

Electrochemical Synthesis Of Fes Electrode And Its Behavior Measurement, Cong-Sheng Guan Aug 1999

Electrochemical Synthesis Of Fes Electrode And Its Behavior Measurement, Cong-Sheng Guan

Journal of Electrochemistry

The Potential for the electrochemical synthesis of FeS electrode has been obtained by cyclic voltammetry. FeS electrodes were synthesiaed by controlling Fe electrode at -1.0 V in LiCl-KCl-Li2S and Li(FClI)-Li2S melts and their behavior were measured also. The FeS electrode synthesized in molten Li(FClI)-Li2S has the best charge and discharge properties.

Go to article

Oxidation And Adsorption Of Deoxyribonucleic Acid At Highly Ordered Pyrolytic Graphite And Glass Carbon Electrode, Jian-Zhang Zhou, Ling-Ling Wu, Jin Luo, Zhong-Hua Lin May 1999

Oxidation And Adsorption Of Deoxyribonucleic Acid At Highly Ordered Pyrolytic Graphite And Glass Carbon Electrode, Jian-Zhang Zhou, Ling-Ling Wu, Jin Luo, Zhong-Hua Lin

Journal of Electrochemistry

It is shown that calf thymus DNA (CT DNA) can be adsorbed at highly ordered pyrolytic graphite (HOPG) electrode and detected by differential pulse voltammetry (DPV) and electrochemical atomic force microscopy (ECAFM). It is found that controlled potential pre-polarization influences largely the adsorption of dsDNA while it has little influence on ssDNA. It is demonstrated that ECAFM is useful to exploit adsorption of DNA at HOPGE. The pattern of adsorption of DNA at HOPG electrode that fits best with the experimental data is proposed. The results aslo shows that UV/Vis reflection spectroscopy, which has not been used in studying electrochemical …

Go to article

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao May 1999

Influence Of Ptfe And Nafion On The Utilization Efficiency Of Pt/C Catalyst In Pemfc, Xiao-Liang Cheng, Bao-Lian Yi, Jing-Xin Zhang, Ming Han, Ya-Guang Qiao

Journal of Electrochemistry

With cycling voltammetry curve(C-V), TEM and SEM photographs, the influence of PTFE and Nafion on the platinum utilization in catalyst layer of PEMFC was investigated. The results show that in gas diffusion electrode, the blocking effect of PTFE in the platinum utilization is not pronunced. In the thin-film catalyst layer, the electron conduct of the catalyst was blocked by the nafion solid and this caused the decrease of platinum utilization. With the increase of the nafion content in the catalyst layer, both platinum utilization and the electron conductivity decreased in the catalyst layer. Because the molecule size of nafion is …

Go to article

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi Feb 1999

A New Cell Structure For Proton Exchange Membrane Fuel Cell, Ming Han, Hong-Feng Xu, Bao-Lian Yi

Journal of Electrochemistry

Separating the functions of current collection and gas flow distribution and then to design two separate elements to achieve the desired performance characteristics, a nonconventional cell structure for proton exchange membrane fuel cells bave been developed. The current collector is achieved using a thin stain steel sheet, the gas flow distribution is achieved using a carbon paper that has the desired chemical durabiliy when in contact with the proton exchange membrane. Combining these two separate elements into a single divice yields a bifunctional device that performs as a bipolar separator plate. The advantages of this alternative appproach to making biplar …

Go to article

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan Feb 1999

Kinetic Study Of Electrooxidation Of Benzene, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A reaction kinetic study for electrochemical oxidation of benzene was performed on a PbO2 rotating disk electrode in 1 mol/L H2SO4 aqueous solution. The reaction orders, the activation energies and transfer coefficient were measured, and the kinetic expression was obtained.

Go to article

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang Feb 1999

Oxidation Mechanism Of Hypophosphite, Dong-Bai Sun, Ying Jin, Hong-Ying Yu, De-Jun Yang

Journal of Electrochemistry

There exist two oxidation current peaks on the anodic polarization curve between -0.7 V and 0 V (SCE) in Na-hypophosphite solution. Peak Ⅰ (-0.55 V, SCE) , which represents the oxidation process from H2PO2- to H2PO3-, has been studied previously. Peak Ⅱ, which is located at the potential about -0.4 V (SCE), is investigated emphatically in this paper. The results show that, peak Ⅰ and Ⅱ are corresponding to two successive steps in oxidation process of H2PO2-, i.e. peak Ⅱ corresponds to the oxidation process of …

Go to article

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji Feb 1999

Synthesis And Application Of Polymeric Corrosion Inhibitor For Reinforced Concrete, Wei-Wei Lin, Sheng-Xian Wang, Jian-Qing Zhang, Jun Yuan, Zhen-Guo Ji

Journal of Electrochemistry

A new polymer E-T was synthesized and used as a corrosion inhibitor for reinforced concrete. The inhibitive behavior and mechanism were studied with linear polarization, Tafel polarization, EIS and XPS method in simulated pore solution system with concrete samples. The result showed that the polymer was a mixing type inhibitor. A 1% dosage was sufficient to imhibit the corrosion of steel in simulated pore solution system. The salt endurance was enhanced from 0.02 mol/L to 0.10 mol/L. The result also showed the good synergetic effect of NaNO2, especially in low NaNO2 concentration. The EIS showed that E-T …

Go to article

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song Feb 1999

Studies Of Electrochemical Characteristics Of Pasted Nickel Hydroxide Electrode With Surface Deposited Cobalt, Xian-You Wang, Yun-Shi Zhang, Jie Yan, Zheng Zhu, Hua-Tang Yuan, De-Ying Song

Journal of Electrochemistry

The surface of the spherical nickel hydroxide particles used as an active material in pasted nickel electrodes is surface-deposited with cobalt. This paper investigated the effects of the amount of cobalt deposit on the characteristics of nickel hydroxide electrode. The performances of the electrode, such as discharge capacity, utilization of active material and reversibility of Ni(OH)2/NiOOH redox reaction, were studied by comparing the charging/discharging curves and cyclic voltammograms. The mechanism of action of cobalt deposits has been described in terms of the electrochemical impedance spectroscopy of nickel hydroxide electrode.

Go to article

Primary Research Of Reversible Proton Exchange Membrane Regenerative Fuel Cells, Zhi-Gang Shao, Bao-Lian Yi, Ming Han Nov 1998

Primary Research Of Reversible Proton Exchange Membrane Regenerative Fuel Cells, Zhi-Gang Shao, Bao-Lian Yi, Ming Han

Journal of Electrochemistry

In this paper, we report the results of our studies on regenerative proton exchange membrane fuel cell (RPEMRFC) catalysts, electrode preparation and their performances. The Pt catalyst for the oxygen electrode was replaced by 60 w%Pt + 40 w%IrO2 which reduces polarization by 0.2 V in a polymer protone exchange membrane fuel cell. The cycle performance of RPEMRFC was found to be manly effected by the stability of the diffiusion layer of bifunctional oxygen electrode.

Go to article

The Latest World Wide Progress In Solid Oxide Fuel Cell, Yi Jiang Nov 1998

The Latest World Wide Progress In Solid Oxide Fuel Cell, Yi Jiang

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a novel, green electricity generation technology, which has been showing rapid development since 1980's. In light of its high efficiency, environmental friendly, fuel adaptability and long term stability, the Research, Development and Demonstration (RD&D) of this hype of full cell have been emphasized in a large number of developed countries. Based on the information communicated at the latest symposium on SOFC held last year in Aachen (Germany) and the knowledge gained through years of research in this field, a comprehensive review on the latest development of the tubular, this planar SOFC as well as …

Go to article

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai Nov 1998

A Preliminary Study Of The Synthesis Of Tin-Based Amorphous Material And Its Behavior On Lithium Intercalation, Li Liu, Han-Xi Yang, Ju-Tang Sun, Xing-Ping Ai

Journal of Electrochemistry

An amorphous lithium inserting anode material based on Tin oxide glass was synthesized by salification in solution and its properties on lithium intercalation was investigated by X ray diffraction (XRD), microelectrode voltammetry and charge discharge measurements. The results have shown that this kind of material has considerable electrochemical reversibility toward lithium intercalation deintercalation. The available discharge capacity of the material reaches 430 mAh/g with charge-discharge efficiency over 90%, showing a great potential for practical use.

Go to article

Direct Electro-Oxidation Synthesis Of D-Arabinose On Spectroscopic Graphite Electrode, Hei Wei, Huang Ying Nov 1998

Direct Electro-Oxidation Synthesis Of D-Arabinose On Spectroscopic Graphite Electrode, Hei Wei, Huang Ying

Journal of Electrochemistry

D Arabinose synthesized by direct electro-oxidative decarboxylation of D gluconate on graphite electrode from aqueous solutions. The effects of D gluconate concentration, electrolysis potential, temperature and electrolyte composition on the current efficiency and product yield of electrosynthsis are discussed. The laboratory scale electrosynthesis was achieved with flow through cell. The optimum technology conditions for electrosynthesis were obtained with orthogonal design method. Both galvanostatic and potentionstatic conditions have been exploited, the later was found to be more effective.

Go to article

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen Nov 1998

Study On Electrosynthesis Of Butyl Butyrate At Conducting Oxide Anode Support On Titanium, Jun-Xiang He, Jin-Cheng Zhou, Kang-Ning Chen

Journal of Electrochemistry

Synthesis of butyl butyrate by direct electroxidation of n butyl alcohol and the electrochemical behaviors of several selected conducting oxide electrodes (Pb/PbO2, Ti/PbO2, i/SnO2+Sb2O3/PbO2 and Ti/SnO2+Sb2O3+PdOx/PbO2) have been investigated. The results demonstrated that the intermediate layers of SnO2, Sb2O3 and PdOx could significantly decrease the interfacial resistance of the electrodes, and that the Ti/SnO2+Sb2O3+PdOx/PbO2 electrode possessed better electrocatelytic performance than others.

Go to article

Direct Electrochemical Reaction Of Cytochrome C At The Poly (Ethylene Oxide) Film Modified Gold Electrodes, Xiao-Gang Qu, Gong-Quan Sun, Hui Yang, Tian-Hong Lu Aug 1998

Direct Electrochemical Reaction Of Cytochrome C At The Poly (Ethylene Oxide) Film Modified Gold Electrodes, Xiao-Gang Qu, Gong-Quan Sun, Hui Yang, Tian-Hong Lu

Journal of Electrochemistry

In this paper, the direct electrochemical reaction of cytochrome c was sudied at the poly (ethylene oxide) film modified gold electrodes. It was found the PEO is a good promoter for the electrochemical reaction of cytochrome c, and the reversibility of reaction of cytochrome c was found to depend on the molecular weight of PEO and the morphology of the PEO films.

Go to article

Studies On The Electrode Kinetics Of Electrooxidation Of Mn2+, Wan-Li Hu, Tong Su, Wei Guo, Ding Zhou Aug 1998

Studies On The Electrode Kinetics Of Electrooxidation Of Mn2+, Wan-Li Hu, Tong Su, Wei Guo, Ding Zhou

Journal of Electrochemistry

The mechanism of electrooxidation of MnSO4 on Pb Sb As alloy anode was investigated by using rotating disc electrode technique. The results shown that the conditional standard potential of Mn(Ⅲ)/Mn(Ⅱ)in 40% H2SO4 is 0.886 4 V.The rate controlling step of electrode process is mixed controlled by charge transfer and diffusion.

Go to article

Study Of Proton Exchange Membrane Fuel Cells(Pemfc), Shan-Hai Ge, Bao-Lian Yi, Hong-Fen Xu, Ming Han, Zhi-Gang Shao Aug 1998

Study Of Proton Exchange Membrane Fuel Cells(Pemfc), Shan-Hai Ge, Bao-Lian Yi, Hong-Fen Xu, Ming Han, Zhi-Gang Shao

Journal of Electrochemistry

The electrode kinetic parameters for proton exchange membrane fuel cells(PEMFC) were investigated by measuring the relations of cell potential and current density. An experimental stack of PEMFC which can be operated at E cell =0.7V, I =0.55A/cm2 steadily is presented, and the effects of electrode structure and operation conditions such as temperature, pressure, humidification, flow rate on the performance of PEMFC are discussed.

Go to article

Electrooxidation Of Benzene To Benzoquinone In A Packed Bed Reactor, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan Aug 1998

Electrooxidation Of Benzene To Benzoquinone In A Packed Bed Reactor, Xin-Sheng Zhang, Ping Ding, Ying-Chun Dai, Wei-Kang Yuan

Journal of Electrochemistry

A packed electrode reactor was used to oxidize to benzoquinone. Anode bed of the reactor has a size of 10～30 mm×450 mm×50 mm(thickness×length×width),and was packed porous lead alloy. A dispersion of benzene in 1 mol/L aqueous sulfuric acid was passed through the reactor. Current efficiency for benzoquinone generation is 62.9% at optimal operating condition: velocity of electrolyte flow, 0.19 ms -1 ;current, 10 A; thickness of anode bed, 10 mm, and percentage of benzene, 24%.

Go to article

Studies Of Surface Alloy As High Efficient Electrocatalyst For Glyoxylic Acid Synthesis, Sheng-Pei Chen, Sheng-Qing Xia, Shi-Gang Sun May 1998

Studies Of Surface Alloy As High Efficient Electrocatalyst For Glyoxylic Acid Synthesis, Sheng-Pei Chen, Sheng-Qing Xia, Shi-Gang Sun

Journal of Electrochemistry

/

Go to article

In-Situ Raman Spectroscopic Study Of The Oxidation And Reduction Of Ag Electrode In Na2So4, Yan-Xia Chen, Kai-Qi Huang, Zhong-Qun Tian May 1998

In-Situ Raman Spectroscopic Study Of The Oxidation And Reduction Of Ag Electrode In Na2So4, Yan-Xia Chen, Kai-Qi Huang, Zhong-Qun Tian

Journal of Electrochemistry

In-situ Raman spectroscopy combined with cyclic voltammogram measurements was used to investigate formation of oxygen species at Ag electrode surfaces during the oxidation and reduction process in 0.1 mol/L Na2SO4 solution. The time dependent Raman spectra show that at potentials positive of 0.2 V, adsorption of oxygen atom occurs, while at the potentials positive of 0.4 V, some oxygen atoms migrate into subsurface of the Ag electrode and the other form strongly bound oxygen on the surface through chemical bond. At the same potentials, part of the silver atoms are oxidized and form Ag2SO4 …

Go to article

Studies Of Surface Electrochemistry And Electrocatalysis At Atomic And Molecule Level, Shigang Sun Feb 1998

Studies Of Surface Electrochemistry And Electrocatalysis At Atomic And Molecule Level, Shigang Sun

Journal of Electrochemistry

The main progresses achieved during last few years in our research group concerning studies of surface electrochemistry and electrocatalysis were reviewed in this present paper. Four topics were described: 1) the surface electrochemistry and model electrocatalysis of metal single crystal planes, 2) the electrocatalytic reaction mechanism and the control of reaction pathways at molecule level, 3) the reaction kinetics of electrooxidation of small organic molecules, and 4) the relationship between the properties and the surface chemical states of electrocatalyst. This review lays in emphasis on the demonstration of the results as well as the research direction of surface electrochemistry and …

Go to article

Study On The Synthesis And Electrochemical Behavior Of Poly (Quinonoid-Disulfide), Xiaohui Tang, Xiuwu Sun, Yongfang Li, Shibi Fang Feb 1998

Study On The Synthesis And Electrochemical Behavior Of Poly (Quinonoid-Disulfide), Xiaohui Tang, Xiuwu Sun, Yongfang Li, Shibi Fang

Journal of Electrochemistry

Organic polydisulfide containing quinonoid structure was synthesized by chloromethylation, oxidation by nitric acid, and condensation polymerization with sodium disulfide. The effect of quinonoid structure on the electrochemical behavior of organic polydisulfide was investigated with cyclic voltammetry and chargedischarge measurement. The result shows that quinonoid struture mainly affects the positions of redox peaks of organic polydisulfide, open circuit voltage and discharge platform voltage of cell with the organic polydisulfide as cathode.

Go to article

The Investigations Of Surface Treatment Methods And Characterization Of Oxide Films On Ab5 Based Metal Hydride Electrodes Ⅰ. New NiRich Treatment Methods And Photoelectrochemical Characterization Of Oxide Films, Junmin Nan, Yong Yang, Jun Li, Zugeng Lin Feb 1998

The Investigations Of Surface Treatment Methods And Characterization Of Oxide Films On Ab5 Based Metal Hydride Electrodes Ⅰ. New NiRich Treatment Methods And Photoelectrochemical Characterization Of Oxide Films, Junmin Nan, Yong Yang, Jun Li, Zugeng Lin

Journal of Electrochemistry

Two simple and efficient surface treatment methods for AB5 type hydrogen storage alloys were developed. The results of X-ray photoelectron spectroscopy (XPS) and cyclic voltammetric (CV) experiments showed that the hydrogen storage alloys treated by two different methods had Ni rich surface layer so that the performances of the electrodes were improved after treatment. The characterization of the oxide films which formed on the surface of electrodes through potentiodynamic oxidation with the help of photoelectrochemical microscopy (PEM) were done. The anodic photocurrent and the cathodic photocurrent related to the oxidation of hydrogen and the reduction of oxygen on the …

Go to article

A Study On Heterogeneous Indirect Electrosynthesis Of Benzaldehyde, Daobao Chu, Changjian Lin, Huashui Lin, Jianguang Tan Feb 1998

A Study On Heterogeneous Indirect Electrosynthesis Of Benzaldehyde, Daobao Chu, Changjian Lin, Huashui Lin, Jianguang Tan

Journal of Electrochemistry

Heterogeneous indirect electrosynthesis process of benzaldehyde has been investigated using cyclic voltammetry and polarization curves. An optimum condition for preparation of benzaldehyde by indirect electrooxidation of toluenc with redox Mn3+/Mn2+ is given in this paper. Electrolytic regeneration Mn3+ are made at Pt/Ti anode in “slurry” MnSO4/H2SO4 medium. Current efficiency for electrolytic regeneration Mn3+  was maintained over 88% by “double cyclic way”.

Go to article

Investigation Of Methanol Anode Electrooxidation Catalysts, Gangyao Wen, Ying Zhang, Zhenglong Yang, Changzhi Li Feb 1998

Investigation Of Methanol Anode Electrooxidation Catalysts, Gangyao Wen, Ying Zhang, Zhenglong Yang, Changzhi Li

Journal of Electrochemistry

A series of catalysts, Pt-WO3/C, Pt/Ru/C and Pt-Ru-WO3/C were prepared by chemical reduction deposition. Electrocatalytic oxidation of methanolon different catalyst/Nafion membrane electrodes was studies by voltammetry and current-potential polarization. The results indicated that the catalytic activity order of different catalysts is as follows: Pt-Ru-WO3/C > Pt-Ru/C > Pt-WO3/C. At the same time, influences of methanol concentrations and catalyst proportion on performances of anodes were also studies.

Go to article

Progresses In Surface Electrochemistry And Electrocatalysis ——A Review On The 1997 Joint International Meeting Of Electrochemistry And 97' International Meeting Of Surface Electrochemistry, Shigang Sun Feb 1998

Progresses In Surface Electrochemistry And Electrocatalysis ——A Review On The 1997 Joint International Meeting Of Electrochemistry And 97' International Meeting Of Surface Electrochemistry, Shigang Sun

Journal of Electrochemistry

The progresses in surface electrochemistry and electrocatalsis reported in the 1997 joint international meeting of electrochemistry and in the 97′ international meeting of surface electrochemistry were reviewed. The main trends described in this paper consisted of 7 aspects: 1) the studies employing single crystal electrodes, 2) the development of in situ methods of diverse spectroscpoy, 3) the innovation of new research techniques, 4) the preparaton of electrocatalyst of high performances, 5) the quantitative studies on kinetics of electrocatalytic reactions, 6) the investigation on the dynamic processes of surface by timeresolved methods, and 7) the theoretical modeling and simulation of surface …

Go to article

Molten Carbonate Fuel Cell Materials And Technology, Naichao Li, Baolian Yi Nov 1997

Molten Carbonate Fuel Cell Materials And Technology, Naichao Li, Baolian Yi

Journal of Electrochemistry

Molten Carbonate Fuel Cell materials are reviewed, and the technology of Molten Carbonate Fuel Cell are discussed.

Go to article

Study On Perchlorate Produced By Electrolysis With Oxygen Cathode, Zhigang Shao, Baolian Yi, Naichao Li, Ming Han Nov 1997

Study On Perchlorate Produced By Electrolysis With Oxygen Cathode, Zhigang Shao, Baolian Yi, Naichao Li, Ming Han

Journal of Electrochemistry

A new method of measuring the flow capacity of cell gas in the perchlorate cell process equipped with an oxygen cathode is applided to investigate the influence of changes in the concentration of solution (chloride, chlorate, perchlorate and metal ion) and changes in the operation parameters (current density, temperature and pH) on perchlorate current efficiency. The main abstacle that the oxygen cathode is used in the perchlorate cell process is put forward and a method is provided to resolve it.

Go to article

The Activity Of Alloy Cu-Ni Electrode In Electroreduction Of Aromatic Nitro-Compounds, Chunan Ma, Shaoping Tong, Xiaojun Cheng, Hui Wang Nov 1997

The Activity Of Alloy Cu-Ni Electrode In Electroreduction Of Aromatic Nitro-Compounds, Chunan Ma, Shaoping Tong, Xiaojun Cheng, Hui Wang

Journal of Electrochemistry

Cu-Ni alloy on the basis of copper at different ratio Cu/Ni are prepared by codepostion. The cathode activtiy of film are studied by steady-state polarization for electroreduction nitro-benzene (NB) and 1,5-dinitroanthraquinone (1,5-DNA) to p-aminophenol and 1,5-diamino-4,8-dihydroanthraquinone respectly. The results show that the alloy cathodes at different ratio Cu/Ni have different exchange current density (io) and apparent activition energy (EA). The alloy (CN-30) has maximal io and minimal EA by codeposition at the following conditions: electrolyte: 0.05 mol/L CuSO4·5H2O+0.6 mol/L NiSO4·6H2O+0.25 mol/L Na3Cit·2H2O; …

Go to article

Study On The Oxygen Electrodes Of Alkaline Fuel Cells Effect Of Dopant On The Activity Of Ag/C Catalyst, Jiawei Teng, Linhua Jin, Luncheng Tang Nov 1997

Study On The Oxygen Electrodes Of Alkaline Fuel Cells Effect Of Dopant On The Activity Of Ag/C Catalyst, Jiawei Teng, Linhua Jin, Luncheng Tang

Journal of Electrochemistry

A new kind of nonnoble catalyst for the oxygen electrodes of Alkaline Fuel Cells was investigated. The AgNiBiHg/C catalyst, which was prepared by chemical reduction, was active for the cathodic reduction of oxygen in alkaline fuel cells. It was found that the catalytic activity was improved by adding Ni, Bi, Hg to Ag/C catalyst, and the maximum activity was observed at Ag50%-Ni2%-Bi3%-Hg3%-C42%(wt%). XRD inconjunction with SEM indicated that the crystalline silver turned into amorphous in the presence of doping agents and the grain size of silver was reduced. No dramatic deactivation of the catalyst occured after 5200 hours of service.

Go to article

Electrocatalytic Oxidation Of Methanol On The Stearate Nickel L-B Film, Benzeng Hua, Wenyan Hu, Yanzhen Chen, Yanhong Zhang Aug 1997

Electrocatalytic Oxidation Of Methanol On The Stearate Nickel L-B Film, Benzeng Hua, Wenyan Hu, Yanzhen Chen, Yanhong Zhang

Journal of Electrochemistry

The stearate nickel L-B films is good electroacatlyst for the oxidation of methanol MeOH in alkaline. The electrochemical behaviors of stearate nickel L-B films is affected by the concentration of KOH. The rate of quantity of mickel ion and stearic acid in L-B films is 1∶1, which means that the nickel ion may exist in -COONi(OH) form. The electrocatalytic process is influenced by the concentration of OH-, it involves the penetration of MeOH into the films. The oxidative currents of MeOH are linearly dependent on the bulk concentration.

Go to article

First Prev Next Last