Robotics Commons^™

Mechatronics: Fundamentals, Design, Integration, And Validation, Guoming Zhu

Mechatronics

This textbook is a product of Co-DREAM OER (Collaborative Development of Robotics, Mechatronics, and Advanced Manufacturing Open Educational Resources), an initiative funded by the U.S. Department of Education to develop open educational resource textbooks on robotics, mechatronics, and advanced manufacturing processes. The texts are written for students enrolled in 2-year associate’s, 4-year bachelor’s, and graduate-level courses. This specific text has been created by a team of scholars, students, support staff, and other professionals from across the country. It is intended for mechatronics courses for 4-year bachelor’s and graduate-level programs.

Evaluation Of General Voronoi Diagram Decomposition For Harmonic Fields In Navigation Of Dynamic Environments, Franco Abullarade

Master's Theses

Harmonic potential fields provide provably minimum-free navigation, but any change to the workspace geometry invalidates the field and forces a costly global recomputation, typically restricting them to static environments. This thesis extends the harmonic map framework of Vlantis et al., which maps the free workspace onto a unit disk and uses an atlas of per-region transformations, to dynamic indoor settings. First, we replace their manually annotated room partition with an automatic decomposition based on the Generalized Voronoi Diagram, allowing the atlas to be built from an arbitrary occupancy grid in an automated way. Second, we introduce a localized repair procedure …

Deep Multimodal Sensor Fusion For Autonomous Driving: A Real-World Deployment On Little Blue, Raphael T. Pamie-George

Electrical & Computer Engineering Theses & Dissertations

Accurate perception and control systems are essential for autonomous vehicles to safely interpret and navigate complex environments. Individual sensing modalities such as cameras, LiDAR, and inertial measurement units (IMUs) provide valuable environmental and vehicle state information; however, each sensor exhibits inherent limitations when used independently. Camera performance can degrade under varying lighting conditions, LiDAR measurements may be sparse or affected by environmental noise, and IMU measurements are susceptible to drift over time. Little Blue, a research autonomous vehicle platform from ODU (Old Dominion University), previously relied primarily on camera-based data for neural network training, limiting the system’s ability to exploit …

Robust Real-Time Uav Target Tracking With Onboard Vision-Based Yaw Control, Rylan Malarchick, Jose Castelblanco, Enrique Amaya, Carmen Dimario, Graysen Brinkman, Chirag Kumar, Kiwon Yoon, Sajid Berhane

Beyond: Undergraduate Research Journal

Autonomous tracking of agile unmanned aerial vehicles (UAVs) presents significant challenges for real-time perception and control systems. This work presents AIRHOUND (Autonomous Intelligent Rotorcraft for Hostile Object Unified Navigation and Detection), a UAV platform implementing vision-based yaw tracking through a modular ROS2 software architecture. The system employs YOLOv8 object detection optimized with NVIDIA TensorRT for embedded deployment on an NVIDIA Jetson Orin companion computer. Detected targets are processed through a geometric tracking module that converts pixel coordinates to angular yaw errors using pinhole camera intrinsics, with a proportional controller generating rate-limited yaw commands. These commands are streamed to a PX4 …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Integration Of Robotic Arm And Conveyor With Programmable Logic Controller, Drake A. Small

Master's Theses

To meet new curriculum demands brought on by Cal Poly's upcoming switch to semesters, a new, cross-disciplinary lab module was developed for EE 435 (Industrial Power Control and Automation). The module emphasizes career-applicable skills, preparing students for the field of controls engineering within the manufacturing industry. These skills include robotic control, computer networking and configuration, and embedded systems. The work focused on integrating a collaborative robot arm to pick-and-place boxes on a conveyor. A myCobot 320 Pi and an Ultimation Powered Roller MDR Conveyor were integrated with the existing PLC system using Modbus RTU and EtherNet/IP communication protocols, respectively. A …

Design And Parametric Study Of A Mems-Based Reservoir Computer For Reinforcement Learning, Andrew P. Carr

Master's Theses

Single-node reservoir computing (RC) is a hardware-efficient approach to machine learning, leveraging the dynamics of physical systems. In this work, two reinforcement learning algorithms, Q-learning and Proximal Policy Optimization (PPO), are applied to a simulated micro-electro-mechanical system (MEMS)-based reservoir computer to solve both discrete and continuous control tasks. MEMS-based reservoirs are low-power, compact, and their natural frequencies (kHz to MHz) pair well with real-time control loops. To explore the relationship between reservoir dynamics and learning performance, a parametric study is conducted on two reservoir hyperparameters, reservoir size and neuron separation, using CartPole-v1 and MountainCar-v0. The RC successfully learns multiple tasks …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

Temporal Logic Planning In Semantic Maps Of Unknown Environments Using Tl-Rrt, Dongrui Yang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Autonomous mobile robots are increasingly expected to perform complex missions in unstructured environments. Traditional path planning approaches handle simple point-to-point navigation, but struggle with complex tasks that involve temporal and logical orderings of objectives. Linear Temporal Logic (LTL) provides a method for complex missions (e.g., sequential visits to multiple targets or surveillance tasks) in a strict way. This thesis presents an integrated planning framework that enables a robot to satisfy LTL-based task specifications in an unknown environment by combining a Temporal Logic RRT* (TL-RRT*) planner with semantic mapping. The robot builds a semantic map of its environment online using simultaneous …

A Low-Cost Motion Classification System For A Stuffed Animal Using An Imu And Machine Learning, Rachel N. Guynes

Honors Theses

One of the many fields that has seen the integration of robots is therapy. Zoomorphic robots (ZR) are designed to look and behave like animals to assist in Animal Assisted Therapy (AAT) practices. Studies show that ZRs can provide benefits similar to working with an actual animal; however, their high cost limits their accessibility. This thesis documents the process of building a real-time, low-cost motion classification system that can be attached to a stuffed animal to make it more interactive. Using a Random Forest (RF) classifier, the system identifies movements with approximately 81.67% accuracy.

Ultragps: A Low-Cost, Open-Source Ultrasonic Positioning System, Scott Roelker Murillo, Nnamdi Jesse Onwuzurike

Posters - 2026

We want to raise the bar in high school robotics. In Texas, and likely in many other states as well, high school robotics has reached a roadblock when it comes to autonomous navigation. In many competitions, the autonomous portion sees few, teams successfully completing tasks that require positioning and guidance. In modern robotics, it is no longer sufficient for a robot merely be “remote controlled.” They need to be able to navigate independently and adapt to the environment around them. To achieve this goal a positioning system is needed to develop the foundational algorithms for autonomous controls. However, these systems …

Behavioral-Centric Team Evaluation Via Consistent Rewards, Clement Kudakwashe Nyanhongo

Dartmouth College Ph.D Dissertations

Across human domains ranging from sports to business and organizational settings, complex tasks are often solved by teams rather than individuals, leveraging benefits such as interaction, mutual support, complementary skills, cohesion, and task allocation. Evaluating team effectiveness, however, is inherently challenging due to the subjectivity of many existing techniques and the limitations of outcome-driven metrics that primarily focus on performance scores while overlooking the team processes that generated the scores. To address these challenges, this dissertation proposes a behavioral-centric, end-to-end framework for team evaluation grounded in reward functions that model sequential team behavior. Reward functions offer compact and interpretable representations …

Using Ai To Predict Energy Expenditure In Lower Limb Prosthesis Users, Nelly Diaz, Siem Hadish

Posters - 2026

• Computer vision has evolved from simple image classification and object detection to analyzing human motion and biomechanics (1). • CNN’s are usually focused on image classification, but, in this case, we are not asking the model if a person is walking. • Many real-world problems require regression: Predicting a continuous number like energy expenditure of walking is a complex task. • It is essential for Prosthetists to understand energy expenditure of their prosthetic patients (2). • An amputee may use 20-30% more energy to walk. • In this project, we developed an AI model to analyze human motion and …

Tuning And Performance Of Pid Controlled Low Complexity Systems, Timothy Evans

Honors Theses

Proportional integral derivative (PID) controllers are used for precise position and orientation control in systems such as autonomous underwater vehicles (AUVs). This project supports the University of Southern Mississippi’s (USM) Robotics Club’s RoboSub AUV effort by developing, troubleshooting, and manually tuning PID controllers to characterize tracking performance and settling time across systems of increasing complexity. Initially, the project hypothesized that tracking performance would be reduced and settling times would increase as system complexity advanced from one degree-of-freedom (DOF) to two DOF. However, prior research was found that suggests that for small disturbances around an equilibrium state, separate PID-controlled DOFs can …

A Pretraining-Based Framework For On-Device Training Of Imu-Based Locomotion Mode Detection For Wearable Active Exoskeletons, Muhammad Tahir Khan

LSU Master's Theses

Active exoskeletons are being developed to support human movement in physically demanding industries such as construction. For these systems to work effectively, they must be able to correctly identify the user’s current activity. This process is known as locomotion mode detection and plays an important role in selecting the appropriate control parameters for exoskeletons. Many existing approaches use inertial measurement units (IMUs) to recognize these activities and have shown strong performance. However, most of these methods depend on large amounts of labeled data collected under specific conditions. As a result, they often do not perform well when applied to new …

Ai-Scm Cmm: A Capability Maturity Model For Artificial Intelligence Integration In Supply Chain Management, Lordt Becklines, Omar F. El-Gayar, Patti Brooks, Insu Park

Annual Research Symposium

Artificial intelligence is increasingly deployed in supply chain management, yet many organizations struggle to align adoption efforts with process readiness, data quality, governance, and workforce capabilities, and they still lack validated supply chain specific roadmap for assessing readiness, sequencing investments, and reducing implementation risk. This study develops and evaluates a Capability Maturity Model for Artificial Intelligence Integration in Supply Chain Management to address that gap. Using a design science research approach, the study synthesizes prior literature and practitioner knowledge to define maturity dimensions, capability indicators, and staged progression levels for AI integration in supply chain contexts. The artifact and assessment …

Identification Of Thruster Faults In Underwater Vehicles By Using Custom Encodings In Spiking Neural Networks, Donovan Gegg

LSU Master's Theses

Autonomous Underwater Vehicles (AUVs) are untethered robotic platforms used for tasks such as seafloor mapping, infrastructure inspection, and environmental monitoring. Recent technological advances have produced smaller, more affordable platforms, broadening access to research teams and small companies alike. This miniaturization comes at the cost of them handling drawbacks associated with a more compact machine such as reduced battery capacity as well as limited processing and sensing capabilities. These constraints make small-sized marine vehicle’s reliability critical as they can cause malfunctions, making the loss of a vehicle more likely. Actuator faults are particularly consequential as unintended and unstable control in an …

A Capability Maturity Model For Artificial Intelligence Integration In Supply Chain Management, Lordt Becklines

Dissertations

Artificial Intelligence (AI) is transforming Supply Chain Management (SCM), yet many organizations struggle to assess their readiness for AI adoption and to understand how AI capabilities develop across maturity stages. This dissertation addresses this gap by developing a Capability Maturity Model (CMM) for AI integration in SCM, grounded in Organizational Information Processing Theory (OIPT), the Resource-Based View, and related capability frameworks. The model provides a structured approach for evaluating an organization's information-processing requirements, resource configurations, and alignment needed for effective AI-enabled supply chain operations.

Using a design science research approach, the AI-SCM CMM and its associated assessment instrument were derived …

Robotic Air Hockey Table, William Forcey, Andrew Piunno, Kaden Carpenter, Xander Zavatchen

Williams Honors College, Honors Research Projects

Air hockey, a popular arcade game, is traditionally designed for two players. This limits the game’s accessibility for individuals who wish to practice or enjoy it as a single player. To solve this problem, a robotic system was implemented to play air hockey against a human player. The speed and acceleration of the puck and mallet were measured from a game played between humans to inform the required movement capabilities of the robot. The robotic opponent implemented observes the location of the puck on the table using a camera and predicts where it will be in the future. A Cartesian …

End-To-End Development And Experimental Validation Of A 1/10-Scale Autonomous Vehicle, Rikkin Pankaj Panchal

Electrical Engineering Theses

Autonomous vehicle development demands vast resources, making scaled down platforms a critical alternative for solving core algorithmic challenges. The primary contribution of this thesis is the end to end development and validation of a complete real time autonomous driving pipeline deployed on a one tenth scale vehicle. To streamline platform development, an AI assisted annotation framework automates dataset generation, significantly reducing manual labor while improving training data quality. The system perception stack features a reinforcement learning guided online multi camera calibration framework that enables adaptive surround view stitching without the need for offline recalibration. This is paired with robust lane …

Multi-Level Energy Optimization For Connected And Automated Vehicles: From Cooperative Multi-Vehicle Control To Individual Powertrain Management, Pruthwiraj Santhosh

Dissertations, Master's Theses and Master's Reports

The transportation sector currently accounts for nearly 30% of global energy consumption, necessitating urgent advancements in vehicle efficiency to meet Net Zero targets. Leveraging connectivity and automation, this dissertation proposes and validates methodologies to reduce the energy consumption of light-duty vehicles at both fleet and individual levels.

First, a validation framework is developed to bridge the “simulation-to-real world” gap in Cooperative Automated Vehicle (CAV) research. Moving beyond virtual simulations, the study establishes a methodology for physically validating centralized control architectures via a custom Cellular V2X network. By synchronizing vehicle-powertrain models with physical test vehicles, the framework successfully orchestrates complex arterial …

Exploring Interactive Robotic Music Therapy Systems For Rehabilitation: A Survey Paper, Hector A. Salinas Gordillo

Discovery Undergraduate Interdisciplinary Research Internship

Interactive robotic music therapy introduces an innovative opportunity, where human guided musical interaction with robotic systems can create adaptive and engaging therapeutic experiences. This survey explores the current state of research at the intersection of robotics, music, and rehabilitation, focusing on emerging technologies such as human robot interaction methods and system designs that help enable real time, interactive music therapy.

Potential patient groups include individuals undergoing motor or cognitive rehabilitation, such as those recovering from stroke, living with Parkinson’s disease, cerebral palsy, or other motor impairments, as well as individuals with developmental disorders or limited mobility.

Traditional rehabilitation exercises may …

Rapid Prototyping Of Low-Cost Sensor Systems Towards A Platform For Upper Limb Posture Estimation, Russell Rathbun

Electrical Engineering and Computer Science Undergraduate Honors Theses

Physical therapy requires patients to perform repeated actions to achieve meaningful results in rehabilitation. This thesis explores production methods and various sensor systems by utilizing rapid prototyping, inertial measurement units (IMUs), and capacitive sensor arrays (CSAs). CSAs can be made from a wide ar- ray of materials and techniques including 3d printing and laser ablation–to rapidly create CSAs that can be custom fit to enable proximity, force, and touch detection. IMU and CSA systems individually are able to track upper limb movements, ges- tures, and positions. This combination of sensors enables accurate upper limb pos- ture estimation of patients. This …

Hallucination Techniques For Self-Supervised Synthetic Datasets For Mobile Robots, Wyatt D. Colburn

Master's Theses

Classical techniques in autonomous navigation struggle in tightly constrained spaces. Machine learning has been shown to perform better in these difficult environments but most techniques require large amounts of navigation experience for training. Using a new machine learning paradigm learning from hallucination (LfH), training data can be collected in a safe environment and not require supervision. Data is collected in real time while an agent performs a random walk in free space, supervision is not required as there are no obstacles for the robot to run into. After a random walk a post processing pipeline will hallucinate a safety corridor …

Environment Mapping And Gps-Based Trailer Parking Using Low-Cost Peripheral Sensors And Post-Processing Algorithms, Connor Best

Journal of Undergraduate Research at Minnesota State University, Mankato

This paper explores the merit of software data optimization through two practical examples: environment mapping & GPS navigation.

Csc36000 - Modern Distributed Computing Assignment, Saptarashmi Bandyopadhyay

Open Educational Resources

This assignment covers standard performance metrics for Distributed Systems and the basics of Multiprocessing for CSC36000 - Modern Distributed Computing at the City College of New York CUNY. It is an interactive coding assignment intended to be executed in a Python notebook.

Generative Ai: Another Chapter Of Human-Machine Communication, Seungahn Nah, Patric R. Spence

Human-Machine Communication

This editorial introduces a special issue of Human-Machine Communication that explores how generative AI reshapes the communicative relationship between humans and machines. It highlights emerging research on technology use, education, interpersonal dynamics, and trust in AI-generated content, emphasizing that generative AI’s significance lies not in novelty but in the social negotiations it provokes around meaning, authority, and credibility.

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …