Open Access. Powered by Scholars. Published by Universities.®

Hardware Systems Commons™

Open Access. Powered by Scholars. Published by Universities.®

2018

Discipline
Institution
Keyword
Publication
Publication Type

Articles 1 - 30 of 30

Full-Text Articles in Hardware Systems

A Companion Study Guide For The Cisco Dcicn Data Center Certification Exam (200-150), Miguel Ramlatchan Dec 2018

A Companion Study Guide For The Cisco Dcicn Data Center Certification Exam (200-150), Miguel Ramlatchan

Distance Learning Faculty & Staff Books

The official Cisco DCICN book and practice exams are great resources, but this is not an easy exam. This study guide is a companion to those resources and summarizes the subject areas into additional review questions with an answer description for each item. This book is not a "braindump" and it is not bootleg screenshots of the actual exam. Instead, this book provides additional context and examples, serves to complement other study guides, and provides additional examples. If you are getting ready to take the exam for the first time, I hope that this guide provides the extra help to …


Injecting Control Commands Through Sensory Channel: Attack And Defense, Farhad Rasapour Dec 2018

Injecting Control Commands Through Sensory Channel: Attack And Defense, Farhad Rasapour

Boise State University Theses and Dissertations

Industrial Control System (ICS) is responsible for controlling and managing critical infrastructures like nuclear plants and power plants. ICS is equipped with various devices like communication media, Programmable Logic Controller (PLC), actuators, and sensors. Sensors are used to measure a physical phenomenon and send these measurements through the sensory channel to the control devices so they can make decisions on the movements of the actuators in the systems. While tampering with the sensor measurements has been the focus of many studies, there is some research that has concentrated on misusing a sensor and sensory channel as an axillary attack device …


Criticality Assessments For Improving Algorithmic Robustness, Thomas B. Jones Nov 2018

Criticality Assessments For Improving Algorithmic Robustness, Thomas B. Jones

Computer Science ETDs

Though computational models typically assume all program steps execute flawlessly, that does not imply all steps are equally important if a failure should occur. In the "Constrained Reliability Allocation" problem, sufficient resources are guaranteed for operations that prompt eventual program termination on failure, but those operations that only cause output errors are given a limited budget of some vital resource, insufficient to ensure correct operation for each of them.

In this dissertation, I present a novel representation of failures based on a combination of their timing and location combined with criticality assessments---a method used to predict the behavior of systems …


Hardware And Software (Ksu), Rebecca Rutherfoord, Dawn Tatum, Susan Vandeven, Richard Halstead-Nussloch, James Rutherfoord, Zhigang Li Oct 2018

Hardware And Software (Ksu), Rebecca Rutherfoord, Dawn Tatum, Susan Vandeven, Richard Halstead-Nussloch, James Rutherfoord, Zhigang Li

Computer Science and Information Technology Grants Collections

This Grants Collection for Hardware and Software was created under a Round Eleven ALG Textbook Transformation Grant.

Affordable Learning Georgia Grants Collections are intended to provide faculty with the frameworks to quickly implement or revise the same materials as a Textbook Transformation Grants team, along with the aims and lessons learned from project teams during the implementation process.

Documents are in .pdf format, with a separate .docx (Word) version available for download. Each collection contains the following materials:

  • Linked Syllabus
  • Initial Proposal
  • Final Report


Investigating The Effect Of Detecting And Mitigating A Ring Oscillator-Based Hardware Trojan, Lakshmi Ramakrishnan Oct 2018

Investigating The Effect Of Detecting And Mitigating A Ring Oscillator-Based Hardware Trojan, Lakshmi Ramakrishnan

Electrical Engineering Theses and Dissertations

The outsourcing of the manufacturing process of integrated circuits to fabrications plants all over the world has exposed these chips to several security threats, especially at the hardware level. There have been instances of malicious circuitry, such as backdoors, being added to circuits without the knowledge of the chip designers or vendors. Such threats could be immensely powerful and dangerous against confidentiality, among other vulnerabilities.

Defense mechanisms against such attacks have been probed and defense techniques have been developed. But with the passage of time, attack techniques have improved immensely as well. From directly observing the inputs or outputs, adversaries …


An Iot System For Converting Handwritten Text To Editable Format Via Gesture Recognition, Nidhi Patel Aug 2018

An Iot System For Converting Handwritten Text To Editable Format Via Gesture Recognition, Nidhi Patel

Master of Science in Computer Science Theses

Evaluation of traditional classroom has led to electronic classroom i.e. e-learning. Growth of traditional classroom doesn’t stop at e-learning or distance learning. Next step to electronic classroom is a smart classroom. Most popular features of electronic classroom is capturing video/photos of lecture content and extracting handwriting for note-taking. Numerous techniques have been implemented in order to extract handwriting from video/photo of the lecture but still the deficiency of few techniques can be resolved, and which can turn electronic classroom into smart classroom.

In this thesis, we present a real-time IoT system to convert handwritten text into editable format by implementing …


Remote Sensing Using I-Band And S-Band Signals Of Opportunity, Kadir Efecik, Benjamin R. Nold, James L. Garrison Aug 2018

Remote Sensing Using I-Band And S-Band Signals Of Opportunity, Kadir Efecik, Benjamin R. Nold, James L. Garrison

The Summer Undergraduate Research Fellowship (SURF) Symposium

Measurement of soil moisture, especially the root zone soil moisture, is important in agriculture, meteorology, and hydrology. Root zone soil moisture is concerned with the first meter down the soil. Active and passive remote sensing methods used today utilizing L-band(1-2GHz) are physically limited to a sensing depth of about 5 cm or less. To remotely sense the soil moisture in the deeper parts of the soil, the frequency should be lowered. Lower frequencies cannot be used in active spaceborne instruments because of their need for larger antennas, radio frequency interference (RFI), and frequency spectrum allocations. Ground-based passive remote sensing using …


Real-Time Non-Contact Road Defect Detection Using Inexpensive Sensors, Zhao Xing Lim, Mohammad Jahanshahi, Tarutal Ghosh Mondal, Da Cheng, Shutao Wang, Mohammad K. Sweidan, Aanis Ahmad, Omar Hesham Abouhussein, Xi Chen Aug 2018

Real-Time Non-Contact Road Defect Detection Using Inexpensive Sensors, Zhao Xing Lim, Mohammad Jahanshahi, Tarutal Ghosh Mondal, Da Cheng, Shutao Wang, Mohammad K. Sweidan, Aanis Ahmad, Omar Hesham Abouhussein, Xi Chen

The Summer Undergraduate Research Fellowship (SURF) Symposium

Road defects such as potholes, humps, and road cracks have become one of the main concerns for road and traffic safety worldwide. Pavement defect detection is crucial to ensure road safety. However, current solutions to this problem are either too time-consuming or too expensive to be employed large-scale. We propose a novel approach which has the ability to autonomously detect potholes in real-time using cost-effective sensors. Inexpensive sensors are mounted on a vehicle and a deep learning algorithm is used to identify road defects. The detection system is paired with a GPS and positional sensors to map the location of …


Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul Jun 2018

Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul

The International Student Science Fair 2018

The unremitting trends of increasing population, urbanization, diminishing water supply, and continuing climate change have contributed to declining stocks of arable land per person. Land available for farming is shrinking, and the demand for food is growing. All of these lead to food insecurity. For the first version of Smart Vertical Farm System is designed to increase food productions by an automatic system. It built with shelves which support soil and hydroponic system, stacked vertically. The system first shovels the soil in the tray and sews the seeds. There is also additional watering system. The hydroponic parts are on the …


Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul Jun 2018

Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul

The International Student Science Fair 2018

The unremitting trends of increasing population, urbanization, diminishing water supply, and continuing climate change have contributed to declining stocks of arable land per person. Land available for farming is shrinking, and the demand for food is growing. All of these lead to food insecurity. For the first version of Smart Vertical Farm System is designed to increase food productions by an automatic system. It built with shelves which support soil and hydroponic system, stacked vertically. The system first shovels the soil in the tray and sews the seeds. There is also additional watering system. The hydroponic parts are on the …


A Study Of Scalability And Cost-Effectiveness Of Large-Scale Scientific Applications Over Heterogeneous Computing Environment, Arghya K. Das Jun 2018

A Study Of Scalability And Cost-Effectiveness Of Large-Scale Scientific Applications Over Heterogeneous Computing Environment, Arghya K. Das

LSU Doctoral Dissertations

Recent advances in large-scale experimental facilities ushered in an era of data-driven science. These large-scale data increase the opportunity to answer many fundamental questions in basic science. However, these data pose new challenges to the scientific community in terms of their optimal processing and transfer. Consequently, scientists are in dire need of robust high performance computing (HPC) solutions that can scale with terabytes of data.

In this thesis, I address the challenges in three major aspects of scientific big data processing as follows: 1) Developing scalable software and algorithms for data- and compute-intensive scientific applications. 2) Proposing new cluster architectures …


Genetic Algorithm Amplifier Biasing System (Gaabs): Genetic Algorithm For Biasing On Differential Analog Amplifiers, Sean Whalen Jun 2018

Genetic Algorithm Amplifier Biasing System (Gaabs): Genetic Algorithm For Biasing On Differential Analog Amplifiers, Sean Whalen

Computer Engineering

Genetic Algorithm Amplifier Biasing System (GAABS) - Senior Project Analysis

Summary of Functional Requirements

This project integrates LTSpice with a python script that runs a genetic algorithm to bias a differential amplifier. The system biases the amplifier with 2 different voltages, the base voltage for the PNP BJTs of the active loads and a voltage controlling the current of the current sink. The project runs via a python script, gets data from LTSpice’s command line call, and iteratively runs until the system is biased to achieve the greatest gain on an arbitrary input voltage.

Primary Constraints

Some of the main …


Enabling Autonomous Navigation For Affordable Scooters, Kaikai Liu, Rajathswaroop Mulky Jun 2018

Enabling Autonomous Navigation For Affordable Scooters, Kaikai Liu, Rajathswaroop Mulky

Faculty Publications

Despite the technical success of existing assistive technologies, for example, electric wheelchairs and scooters, they are still far from effective enough in helping those in need navigate to their destinations in a hassle-free manner. In this paper, we propose to improve the safety and autonomy of navigation by designing a cutting-edge autonomous scooter, thus allowing people with mobility challenges to ambulate independently and safely in possibly unfamiliar surroundings. We focus on indoor navigation scenarios for the autonomous scooter where the current location, maps, and nearby obstacles are unknown. To achieve semi-LiDAR functionality, we leverage the gyros-based pose data to compensate …


Home Weather Station, Jarrett William Corr Jun 2018

Home Weather Station, Jarrett William Corr

Computer Engineering

This senior project implements a mobile weather station that can relay weather data to an indoor module with an LCD display. The outdoor module utilizes a temperature, humidity, and pressure sensor to collect atmospheric weather data and a radio transceiver to transmit the data to a display station via radio frequency communications. The indoor station displays the temperature, humidity and time with an LCD display. The indoor station has a settings menu which allows the user to configure the unit of measurement for the temperature and time where the device is located.


"Dual Peaks" Analog Distortion Guitar Effects Pedal, Dave Raul Breuer Jun 2018

"Dual Peaks" Analog Distortion Guitar Effects Pedal, Dave Raul Breuer

Computer Engineering

The Dual Peaks distortion pedal is an analog effects pedal for electric guitar that distorts and boosts the guitar signal in order to achieve tonal characteristics often heard in music genres such as blues, rock, hard rock, and metal. Dual Peaks aims to remedy the current distortion pedal design, and provide a new spin not often provided in the majority of pedals. Dual Peaks contains two separate distortion channels which provide the player with a vast array of distortion and overdrive tones at the press of a switch. Also, Dual Peaks has a "noise gate" and 3-band equalizer circuits built …


The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette Jun 2018

The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette

Master's Theses

As wireless protocols become easier to implement, more products come with wireless connectivity. This latest push for wireless connectivity has left a gap in the development of the security and the reliability of some protocols. These wireless protocols can be used in the growing field of IoT where wireless sensors are used to share information throughout a network. IoT is being implemented in homes, agriculture, manufactory, and in the medical field. Disrupting a wireless device from proper communication could potentially result in production loss, security issues, and bodily harm. The 802.15.4/ZigBee protocol is used in low power, low data rate, …


Dynamic Video Streaming For Nano Quadcopters, Shane Daniel Kent, Ryan Weideman, Nicholas Kimball Jun 2018

Dynamic Video Streaming For Nano Quadcopters, Shane Daniel Kent, Ryan Weideman, Nicholas Kimball

Computer Engineering

The objective of this project was to develop a system that streams real-time video from a Crazyflie 2.0 nano quadcopter. We discuss the motivation behind the project including applications to swarm robotics and computer vision research. We highlight the initial research and design goals that guided the development of the system such as hardware selection and system specifications. We detail the software and hardware subsystems that we implemented including the video-streaming board, firmware, and video-streaming user application. We examine the performance of the final system and discuss the limitations imposed by the hardware. We conclude by describing future work that …


Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang Jun 2018

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …


Lionfish Detection System, Carmelo Furlan, Andrew Boniface Jun 2018

Lionfish Detection System, Carmelo Furlan, Andrew Boniface

Computer Engineering

Deep neural networks have proven to be an effective method in classification of images. The ability to recognize objects has opened the door for many new systems which use image classification to solve challenging problems where conventional image classification would be inadequate. We trained a large, deep convolutional neural network to identify lionfish from other species that might be found in the same habitats. Google’s Inception framework served as a powerful platform for our fish recognition system. By using transfer learning, we were able to obtain exceptional results for the classification of different species of fish. The convolutional neural network …


Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr Jun 2018

Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr

Electrical Engineering

The Portable High-definition Audio Spectrum Analyzer (PHASA) allows the user to visualize the audio frequency spectrum of an incoming line-level stereo audio signal. Upon pressing the touch screen spectrum graph, the PHASA displays the corresponding frequency and volume levels as well as crosshairs at the touched location. The PHASA features multiple left/right channel display modes— Left channel only, right channel only, both channels simultaneously, and the average between the two channels. The PHASA features multiple resolution display modes (standard-resolution and high-resolution) and multiple dynamics display modes (standard dynamics, averaging, and peak/hold). The PHASA accepts input audio via a 1/4" TRS …


Bicycle Power Meter, Andrew Mcguan Jun 2018

Bicycle Power Meter, Andrew Mcguan

Computer Engineering

A power meter is a cycling training tool used to record the power a rider is outputting. This is very useful to athletes who regularly do bike workouts, because the power output is a consistent measure of the rider’s effort level, and is not affected by outside factors such as wind or road gradient. If a cyclist does a workout with the intent to carry a certain speed for a certain amount of time, a strong headwind will slow them down and make them work harder to maintain the same speed, defeating the goal of the workout. When a power …


Empath-D: Vr-Based Empathetic App Design For Accessibility, Wonjung Kim, Kenny Tsu Wei Choo, Youngki Lee, Archan Misra, Rajesh Krishna Balan Jun 2018

Empath-D: Vr-Based Empathetic App Design For Accessibility, Wonjung Kim, Kenny Tsu Wei Choo, Youngki Lee, Archan Misra, Rajesh Krishna Balan

Research Collection School Of Computing and Information Systems

With app-based interaction increasingly permeating all aspects of daily living, it is essential to ensure that apps are designed to be inclusive and are usable by a wider audience such as the elderly, with various impairments (e.g., visual, audio and motor). We propose Empath-D, a system that fosters empathetic design, by allowing app designers, in-situ, to rapidly evaluate the usability of their apps, from the perspective of impaired users. To provide a truly authentic experience, Empath-D carefully orchestrates the interaction between a smartphone and a VR device, allowing the user to experience simulated impairments in a virtual world while interacting …


Improving System-On-Chip Test Networks For: Bandwidth, Security, And Power, Saurabh Gupta May 2018

Improving System-On-Chip Test Networks For: Bandwidth, Security, And Power, Saurabh Gupta

Computer Science and Engineering Theses and Dissertations

Modern System-on-Chips (SoCs) provide benefits such as reduction in overall system cost, and size, increased performance, and lower power consumption. Increasing complexity of these Integrated Circuits (ICs) has resulted in a higher probability of manufacturing defects. Manufacturing defects can result in the faulty operation of a system. Thus, it is essential to test an IC after it is manufactured to detect any possible faults in it. These SoCs include on-chip embedded instruments that can be used for test, debug, diagnosis, validation, monitoring, characterization, configuration, or functional purposes. IEEE 1687 Std. (IJTAG) provides a standard interface for the reconfigurable access and …


Designing A Distributed Network Of Air Quality Sensors, Kaylee Rauso May 2018

Designing A Distributed Network Of Air Quality Sensors, Kaylee Rauso

Computer Science and Computer Engineering Undergraduate Honors Theses

The deterioration of human and environmental health due to worsening outdoor air quality is a serious global threat. A step towards improving the current state of ambient air worldwide is the increased collection of data for government policy, research, and general public use. Currently, reliable data is only collected at a handful of sites in the state of Arkansas and sparsely across the country. The purpose of this project was to design an inexpensive air quality sensor to saturate entire cities with nodes which transmit air data to a sensor for a web application to display. The prototype node was …


A Proposed Approach To Hybrid Software-Hardware Application Design For Enhanced Application Performance, Alex Shipman May 2018

A Proposed Approach To Hybrid Software-Hardware Application Design For Enhanced Application Performance, Alex Shipman

Graduate Theses and Dissertations

One important aspect of many commercial computer systems is their performance; therefore, system designers seek to improve the performance next-generation systems with respect to previous generations. This could mean improved computational performance, reduced power consumption leading to better battery life in mobile devices, smaller form factors, or improvements in many areas. In terms of increased system speed and computation performance, processor manufacturers have been able to increase the clock frequency of processors up to a point, but now it is more common to seek performance gains through increased parallelism (such as a processor having more processor cores on a single …


Securing Soft Ips Against Hardware Trojan Insertion, Thao Phuong Le May 2018

Securing Soft Ips Against Hardware Trojan Insertion, Thao Phuong Le

Graduate Theses and Dissertations

Due to the increasing complexity of hardware designs, third-party hardware Intellectual Property (IP) blocks are often incorporated in order to alleviate the burden on hardware designers. However, the prevalence use of third-party IPs has raised security concerns such as Trojans inserted by attackers. Hardware Trojans in these soft IPs are extremely difficult to detect through functional testing and no single detection methodology has been able to completely address this issue. Based on a Register-Transfer Level (RTL) and gate-level soft IP analysis method named Structural Checking, this dissertation presents a hardware Trojan detection methodology and tool by detailing the implementation of …


Real-Time Audio-Midi Controller, Brian Shino Balberchak Apr 2018

Real-Time Audio-Midi Controller, Brian Shino Balberchak

Computer Engineering

Most MIDI controllers used in music production use a regular keyboard to generate the MIDI notes that are sent to the synthesizer. This project aims to provide the user with a different way of generating MIDI data: by playing an instrument of their choice with a passive electronic pickup to generate MIDI notes that correspond with the fundamental frequency of the musical pitch being played. The pitch-detecting algorithm used in this application utilizes a modified form of auto-correlation.

As an embedded systems project that uses signal-processing techniques, the knowledge of topics from the following courses was essential:

EE 211: Op-Amp …


Annual Report 2017-2018, Depaul University College Of Computing And Digital Media Jan 2018

Annual Report 2017-2018, Depaul University College Of Computing And Digital Media

CDM Annual Reports

LETTER FROM THE DEAN

I am pleased to share with you the College of Computing and Digital Media’s (CDM) 2017-18 annual report, highlighting the many achievements across our community. It was a big year. We began offering five new programs (two bachelor’s, two master’s, and one PhD) across our three schools, in addition to several new certificate programs through our Institute for Professional Development. We built new, cutting-edge spaces to support these and other programs— most notably a 4,500 square-foot makerspace, a robotics and medical engineering lab, an augmented and virtual reality lab, and plans for a cyber-physical systems project …


Design Of A Machine Vision Camera For Spatial Augmented Reality, Matt Phillip Ruffner Jan 2018

Design Of A Machine Vision Camera For Spatial Augmented Reality, Matt Phillip Ruffner

Theses and Dissertations--Electrical and Computer Engineering

Structured Light Imaging (SLI) is a means of digital reconstruction, or Three-Dimensional (3D) scanning, and has uses that span many disciplines. A projector, camera and Personal Computer (PC) are required to perform such 3D scans. Slight variances in synchronization between these three devices can cause malfunctions in the process due to the limitations of PC graphics processors as real-time systems. Previous work used a Field Programmable Gate Array (FPGA) to both drive the projector and trigger the camera, eliminating these timing issues, but still needing an external camera. This thesis proposes the incorporation of the camera with the FPGA SLI …


Toward Biologically-Inspired Self-Healing, Resilient Architectures For Digital Instrumentation And Control Systems And Embedded Devices, Shawkat Sabah Khairullah Jan 2018

Toward Biologically-Inspired Self-Healing, Resilient Architectures For Digital Instrumentation And Control Systems And Embedded Devices, Shawkat Sabah Khairullah

Theses and Dissertations

Digital Instrumentation and Control (I&C) systems in safety-related applications of next generation industrial automation systems require high levels of resilience against different fault classes. One of the more essential concepts for achieving this goal is the notion of resilient and survivable digital I&C systems. In recent years, self-healing concepts based on biological physiology have received attention for the design of robust digital systems. However, many of these approaches have not been architected from the outset with safety in mind, nor have they been targeted for the automation community where a significant need exists. This dissertation presents a new self-healing digital …