Hardware Systems Commons^™

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

Microcontroller Application For Linear And Rotational Motion Sensing, Zachary Mintzer

Computer Engineering

No abstract provided.

An Analysis Of Conus Based Deployment Of Pseudolites For Positioning, Navigation And Timing (Pnt) Systems, Justin H. Deifel, Albert J. Pena

Theses and Dissertations

The Global Positioning System (GPS) developed and operated by the United States Air Force (USAF) provides a way for users to determine position, navigation and timing (PNT). GPS provides an extraordinary capability that has become instrumental in all aspects of our day to day lives. As new technologies such as automated vehicles and unmanned aircraft continue to be developed, a reliable back up to GPS is required to ensure the PNT data generated in these systems is accurate. This research studies a potential architecture for deploying a nationwide network of ground based pseudolites that would act to supplement and backup …

Printed Circuit Board For Introductory Animatronics Course, Preston Brown

Computer Engineering

For many years, freshmen Computer Engineering students at California Polytechnic State University have taken a course that introduces them to the “processes of electronics manufacturing. They are lectured on concepts such as CAD/CAM design, Design for Manufacture (DFM), documentation requirements, prototyping and production planning”. The laboratory portion of the course allows students to “use hands-on techniques to solidify knowledge of project planning, soldering, automation, hand tool usage and production methods” by manufacturing their own power supply, starting with aluminum sheets, a bag of components, and and an unassembled printed circuit board (PCB).

While the project is popular among students, department …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Forest Sign Maker, Victor Espinosa Iii, Kevin Ly, Lisa Yip

Mechanical Engineering

Executive Summary:

The Inyo National Forest is arguably one of the most beautiful locations in California, containing natural masterpieces such as Mount Whitney and the Ancient Bristlecone Pine Forest. Despite its magnificence, the Inyo National Forest can be a treacherous region. The Friends of the Inyo take pride in being able to facilitate the viewing experience for all outdoorsmen by maintaining the mountain trails, which includes providing adequate trail signage.

Unfortunately, there is a fundamental issue with the recent state of trail signage in the Inyo National Forest: the rate at which signs are being vandalized or naturally destroyed is …

Power Supply For Driving High Power Leds With Wireless Control, Joshua C. Avery

Computer Engineering

This project is the design of a power supply for driving high power light emitting diodes (LEDs) with wireless control. The project is divided into two sections, the power supply for driving the LED lights, and the wireless control and fan power supply.

M-1: The Mealy Open Source Custom Midi Controller, Garrett Leung, Darren O. Mistica

Electrical Engineering

With the high price of large mixing consoles, aspiring artists are restricted to using a mouse to control digital facsimiles of knobs, faders, switches, and buttons. Though using the software controls is considered a simple task, dedicated hardware allows for tactile, visual, and utility. At a low cost, the heart of the MTech M-1 can be customized and placed into any shell with any combination of controls as possible with the underlying platform.

Modern MIDI controllers require significant physical space due to their preset button layout and space consuming setups. Despite their high price, modern MIDI controllers have only one …

Assessing Impact Of Exposure To Cyberphysical Systems On Student Interest In Information Technology Careers, Mayari I. Serrano Anazco

Purdue Polytechnic Masters Theses

The main purpose of this project is to determine if the use of Information Technology (IT) tools, specifically cyberphysical devices, in outreach sessions will promote interest of young individuals in pursuing IT careers. The Diversity office of Purdue’s College of Technology offers a number of outreach sessions to a variety of target populations throughout the year. Each department in the college has an opportunity to present a session related to a field of study offered by the department. The research was carried out thru the Spring 2015 semester during the DOiT and Vision outreach programs offered through the college’s Diversity …

Design And Development Of Two Component Hydrogel Ejector For Three-Dimensional Cell Growth, Thomas Dunkle, Jessica Deschamps, Connie Dam

Honors Scholar Theses

Hydrogels are useful in wound healing, drug delivery, and tissue engineering applications, but the available methods of injecting them quickly and noninvasively are limited. The medical industry does not yet have access to an all-purpose device that can quickly synthesize hydrogels of different shapes and sizes. Many synthesis procedures that have been developed result in the formation of amorphous hydrogels. While generally useful, amorphous hydrogels exhibit limited capability in tissue engineering applications, especially due to their viscous properties. This endeavor aims to modulate the appropriate gelation parameters, optimize the injection process, and create a prototype that allows for the extrusion …

Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen

Master's Theses

Synthetic Aperture Radar (SAR) has come into widespread use in several civilian and military applications. The focus of this paper is the military application of imaging point targets captured by an airborne SAR platform. Using the traditional SAR method of determining target motion by analyzing the difference between subsequent images takes a relatively large amount of processing resources. Using methods in this thesis, target motion can be estimated before even a single image is obtained, reducing the amount of time and power used by a significantly large amount. This thesis builds on work done by Brain Zaharri and David So. …

Disc Golf Locator, Christian Wallenfelsz, Shane Gamble, Noah Sanor, Brandon Linhart

Electrical and Computer Engineering Faculty Research

Disc golf is a game similar to traditional golf where players throw small plastic discs into chain-link nets. Disc golf courses cover several acres containing lakes, small wooded areas, large bushes, and grassy fields. It is not uncommon to accidentally throw a golf disc into the woods or bushes, so it is the goal of this project to create a device to locate the disc and make suggestions for the player to improve performance. A small device will be attached the disc which will track its location and flight characteristics. The device will contain a GPS receiver, an inertial measurement …

Remote Mobile Screen (Rms): An Approach For Secure Byod Environments, Santiago Manuel Gimenez Ocano

School of Computing: Dissertations, Theses, and Student Research

Bring Your Own Device (BYOD) is a policy where employees use their own personal mobile devices to perform work-related tasks. Enterprises reduce their costs since they do not have to purchase and provide support for the mobile devices. BYOD increases job satisfaction and productivity in the employees, as they can choose which device to use and do not need to carry two or more devices.

However, BYOD policies create an insecure environment, as the corporate network is extended and it becomes harder to protect it from attacks. In this scenario, the corporate information can be leaked, personal and corporate spaces …

Comparing The Efficiency Of Heterogeneous And Homogeneous Data Center Workloads, Brandon Kimmons

College of Graduate Studies: Theses & Dissertations

Abstract

Information Technology, as an industry, is growing very quickly to keep pace with increased data storage and computing needs. Data growth, if not planned or managed correctly, can have larger efficiency implications on your data center as a whole. The long term reduction in efficiency will increase costs over time and increase operational overhead. Similarly, increases in processor efficiency have led to increased system density in data centers. This can increase cost and operational overhead in your data center infrastructure.

This paper proposes the idea that balanced data center workloads are more efficient in comparison to similar levels of …

Design Of An All-In-One Embedded Flight Control System, Joel D. Elmore

Theses and Dissertations

This thesis describes an all-in-one flight control system (FCS) that was designed for unmanned aerial vehicles (UAVs). The project focuses on the embedded hardware aspect of a stand-alone system with low-cost and reliability in mind.

High Definition 3d Printing – Comparing Sla And Fdm Printing Technologies, Tyler Finnes

The Journal of Undergraduate Research

For consumer level additive manufacturing, there are currently two main methods to 3D print objects: Stereo lithography and Fused Deposition Modeling. Both processes add material, layer by layer, to create objects. Stereo lithography (SLA) uses a UV light source to selectively cure resin while Fused Deposition Modeling (FDM) extrudes semi-liquid plastic in a specific layout to create objects. As with most technologies, both styles of printing have advantages and disadvantages. The biggest advantage of SLA 3D printing is very high resolution. SLA 3D printing can produce objects with more than double the resolution of FDM printers. The mUVe 3D SLA …

Applications Of Ultrasonic Non-Destructive Testing In 3d Printing, Parker Lawley

The Journal of Undergraduate Research

To determine the capabilities of ultrasonic non-destructive testing methods in 3D printing, test specimens were designed to evaluate advantages and limitations in using ultrasoundC-scanning to determine 3D printing effectiveness. A Matlab program was written to process the data obtained from the UTwin software and ultrasound tank, as well as produce 3D models of the parts being tested. Thickness, types of features, and various printing methods were evaluated to determine how these characteristics vary in effectiveness of C-scan imaging. Results from the UTwin software C-scans were compared to the Matlab program’s imaging and three-dimensional modeling. After determining the capabilities of ultrasonic …

Stargrazer One: A New Architecture For Distributed Maximum Power Point Tracking Of Solar Photovoltaic Sources, Edgard Munoz-Coreas

Theses and Dissertations--Electrical and Computer Engineering

The yield from a solar photovoltaic (PV) source is dependent on factors such as light and temperature. A control system called a maximum power point tracker (MPPT) ensures that the yield from a solar PV source is maximized in spite of these factors. This thesis presents a novel implementation of a perturb and observe (PO) MPPT.

The implementation uses a switched capacitor step down converter and a custom digital circuit implementation of the PO algorithm. Working in tandem, the switched capacitor step down converter and the custom digital circuit implementation were able to successfully track the maximum power point of …

Ultra-Fast, Autonomous, Reconfigurable Communication System, Paul Bupe Jr

College of Graduate Studies: Theses & Dissertations

The recent years have witnessed an increase in natural disasters in which the destruction of essential communication infrastructure has significantly affected the number of casualties. In 2005, Hurricane Katrina in the United States resulted in over 1,900 deaths, three million land-line phones disconnections, and more than 2000 cell sites going out of service. This incident highlighted an urgent need for a quick-deployment, efficient communication network for emergency relief purposes. In this research, a fully autonomous system to deploy Unmanned Aerial Vehicles (UAVs) as the first phase disaster recovery communication network for wide-area relief is presented. As part of this system, …

Hadoop Based Data Intensive Computation On Iaas Cloud Platforms, Sruthi Vijayakumar

UNF Graduate Theses and Dissertations

Cloud computing is a relatively new form of computing which uses virtualized resources. It is dynamically scalable and is often provided as pay for use service over the Internet or Intranet or both. With increasing demand for data storage in the cloud, the study of data-intensive applications is becoming a primary focus. Data intensive applications are those which involve high CPU usage, processing large volumes of data typically in size of hundreds of gigabytes, terabytes or petabytes. The research in this thesis is focused on the Amazon’s Elastic Cloud Compute (EC2) and Amazon Elastic Map Reduce (EMR) using HiBench Hadoop …