Hardware Systems Commons^™

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Involuntary Signal-Based Grounding Of Civilian Unmanned Aerial Systems (Uas) In Civilian Airspace, Keith Conley

Master's Theses

This thesis investigates the involuntary signal-based grounding of civilian unmanned aerial systems (UAS) in unauthorized air spaces. The technique proposed here will forcibly land unauthorized UAS in a given area in such a way that the UAS will not be harmed, and the pilot cannot stop the landing. The technique will not involuntarily ground authorized drones which will be determined prior to the landing. Unauthorized airspaces include military bases, university campuses, areas affected by a natural disaster, and stadiums for public events. This thesis proposes an early prototype of a hardware-based signal based involuntary grounding technique to handle the problem …

Weight Controlled Electric Skateboard, Zachary Barram, Carson Bertozzi, Vishnu Dodballapur

Computer Engineering

Technology and the way that humans interact is becoming more vital and omnipresent with every passing day. However, human interface device designers suffer from the increasingly popular “designed for me or people like me” syndrome. This design philosophy inherently limits accessibility and usability of technology to those like the designer. This places severe limits of usability to those who are not fully able as well as leaves non-traditional human interface devices unexplored. This project set out to explore a previously uncharted human interface device, on an electric skateboard, and compare it send user experience with industry leading human interface devices.

Planr.: Planar Learning Autonomous Navigation Robot, Gabrielle S. Santamorena, Daniel Kasman, Jesus Mercado, Ben Klave, Andrew Weisman, Anthony Fortner

Computer Engineering

PLANR is a self-contained robot capable of mapping a space and generating 2D floor plans of a building while identifying objects of interest. It runs Robot Operating System (ROS) and houses four main hardware components. An Arduino Mega board handles the navigation, while an NVIDIA Jetson TX2, holds most of the processing power and runs ROS. An Orbbec Astra Pro stereoscopic camera is used for recognition of doors, windows and outlets and the RPLiDAR A3 laser scanner is able to give depth for wall detection and dimension measurements. The robot is intended to operate autonomously and without constant human monitoring …

3d Printed Smart Mobile, Bingfang Chen

Publications and Research

The goal of this research project is to design and build a prototype of a smart mobile robot to participate and compete in IEEE Micro-mouse and similar competitions. The robot has to find its way out of a maze as quickly as possible, by exploring and learning the paths in the maze. 3D printing technology will be used to build a lightweight robot frame so that it can move at a fast speed.

Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul

The International Student Science Fair 2018

The unremitting trends of increasing population, urbanization, diminishing water supply, and continuing climate change have contributed to declining stocks of arable land per person. Land available for farming is shrinking, and the demand for food is growing. All of these lead to food insecurity. For the first version of Smart Vertical Farm System is designed to increase food productions by an automatic system. It built with shelves which support soil and hydroponic system, stacked vertically. The system first shovels the soil in the tray and sews the seeds. There is also additional watering system. The hydroponic parts are on the …

Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul

The International Student Science Fair 2018

The unremitting trends of increasing population, urbanization, diminishing water supply, and continuing climate change have contributed to declining stocks of arable land per person. Land available for farming is shrinking, and the demand for food is growing. All of these lead to food insecurity. For the first version of Smart Vertical Farm System is designed to increase food productions by an automatic system. It built with shelves which support soil and hydroponic system, stacked vertically. The system first shovels the soil in the tray and sews the seeds. There is also additional watering system. The hydroponic parts are on the …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

Event And Time-Triggered Control Module Layers For Individual Robot Control Architectures Of Unmanned Agricultural Ground Vehicles, Tyler Troyer

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Automation in the agriculture sector has increased to an extent where the accompanying methods for unmanned field management are becoming more economically viable. This manifests in the industry’s recent presentation of conceptual cab-less machines that perform all field operations under the high-level task control of a single remote operator. A dramatic change in the overall workflow for field tasks that historically assumed the presence of a human in the immediate vicinity of the work is predicted. This shift in the entire approach to farm machinery work provides producers increased control and productivity over high-level tasks and less distraction from operating …

Blend It Wine Blending Distribution System, Connor Clarry, Russell Temple, Matt Moren

Mechanical Engineering

No abstract provided.

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

Software Updates To A Multiple Autonomous Quadcopter Search System (Maqss), Jared Speck, Toby Chan

Computer Engineering

A series of performance-based and feature implementation software updates to an existing multiple vehicle autonomous target search system is outlined in this paper. The search system, MAQSS, is designed to address a computational power constraint found on modern autonomous aerial platforms by separating real-time and computationally expensive tasks through delegation to multiple multirotor vehicles. A Ground Control Station (GCS) is also described as part of the MAQSS system to perform the delegation and provide a low workload user interface. Ultimately, the changes to MAQSS noted in this paper helped to improve the performance of the autonomous search mission, the accuracy …

Robostock: Autonomous Inventory Tracking, Drew Christian Balthazor

Computer Engineering

No abstract provided.

Android Drone: Remote Quadcopter Control With A Phone, Aubrey John Russell

Computer Engineering

The purpose of the “Android Drone” project was to create a quadcopter that can be controlled by user input sent over the phone’s Wi-Fi connection or 4G internet connection. Furthermore, the purpose was also to be able to receive live video feedback over the internet connection, thus making the drone an inexpensive option compared to other, equivalent drones that might cost thousands of dollars. Not only that, but the Android phone also has a host of other useful features that could be utilized by the drone: this includes GPS, pathing, picture taking, data storage, networking and TCP/IP, a Java software …

Autonomous Golf Cart Firmware, Gerik Kubiak

Computer Engineering

The Autonomous Golf Cart Project is a project sponsored by the Cal Poly Robotics Club. The multidisciplinary team is adding sensors and electronics to a regular golf cart with the goal to drive the golf cart around campus without and human input. This task requires a plethora of hardware and firmware to control that hardware. The firmware provides an interface for higher level software to then control the hardware and therefore drive the golf cart. This report is focused on the hardware modifications and the firmware used in order to drive the golf cart from a computer.

Studying The Effects Of Serpentine Soil On Adapted And Non-Adapted Species Using Arduino Technology, Kiana Saniee, Edward Himelblau, Brian Paavo

STAR Program Research Presentations

Abstract: Serpentine soils are formed from ultramafic rocks and are represent an extreme environment for plants. Serpentine soils are unique in that they carry high concentrations of heavy metals, are nutrient deficient, particularly in calcium, and have poor water retention capabilities. Although these soils constitute harsh conditions for plant growth, there are a number of species that are adapted and even endemic to serpentine soil. Water retention by commercial potting mix was compared with serpentine soil. Also, serpentine adapted and non-adapted species were grown in both soil treatments and physiological data were collected. We used the Arduino electronic platform to …

Mechanical Design And Optimization Of An Interactive Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Animatronics is a specialized sub-category of mechatronics, a fusion of mechanical and electrical engineering. The field has grown from small, individual projects into a major industry. As animatronics progress, mechanical engineers are pushed to design internal structures which occupy ever-decreasing spaces and to ensure designs can undergo maintenance and modifications smoothly. This research investigates methods of reducing space required for mechanisms and several other beneficial methods of development as well as varying satisfactions for audiences when exposed to actor-controlled systems rather than pre-scripted functions. The mechanical systems are designed using CAD software available at Georgia Southern. On-campus, resources are used …

Senior Project: Control System For An Underwater Remotely Operated Vehicle, Tyler Mau, Joseph Mahoney

Computer Engineering

No abstract provided.

“My Logic Is Undeniable”: Replicating The Brain For Ideal Artificial Intelligence, Samuel C. Adams

Senior Honors Theses

Alan Turing asked if machines can think, but intelligence is more than logic and reason. I ask if a machine can feel pain or joy, have visions and dreams, or paint a masterpiece. The human brain sets the bar high, and despite our progress, artificial intelligence has a long way to go. Studying neurology from a software engineer’s perspective reveals numerous uncanny similarities between the functionality of the brain and that of a computer. If the brain is a biological computer, then it is the embodiment of artificial intelligence beyond anything we have yet achieved, and its architecture is advanced …

Printed Circuit Board For Introductory Animatronics Course, Preston Brown

Computer Engineering

For many years, freshmen Computer Engineering students at California Polytechnic State University have taken a course that introduces them to the “processes of electronics manufacturing. They are lectured on concepts such as CAD/CAM design, Design for Manufacture (DFM), documentation requirements, prototyping and production planning”. The laboratory portion of the course allows students to “use hands-on techniques to solidify knowledge of project planning, soldering, automation, hand tool usage and production methods” by manufacturing their own power supply, starting with aluminum sheets, a bag of components, and and an unassembled printed circuit board (PCB).

While the project is popular among students, department …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Improved Microrobotic Control Through Image Processing And Automated Hardware Interfacing, Archit R. Aggarwal, Wuming Jing, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Untethered submilliliter-sized robots (microrobots) are showing potential use in different industrial, manufacturing and medical applications. A particular type of these microrobots, magnetic robots, have shown improved performance in power and control capabilities compared to the other thermal and electrostatic based robots. However, the magnetic robot designs have not been assessed in a robust manner to understand the degree of control in different environments and their application feasibility. This research project seeks to develop a custom control software interface to provide a holistic tool for researchers to evaluate the microrobotic performance through advance control features. The software deliverable involved two main …

The Design Of A Mobile, Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Modern animatronics are used as a tool to help engage audiences in realistic and entertaining experiences. Many animatronic figures are dynamic in movement, but static in mobility. The research presented covers the beginnings of mobile animatronic research. An animatronic bald eagle, Opportunity, was designed for that purpose. Animations for Opportunity are generated by integration of Arduino, Pololu Mini Maestro, and Hitec Servo Motors. Arduino receives signals from flex sensors which cause voltage variations when “flexed”. The 1:1 scale, animatronic eagle can be perched on the arm of an “actor” who simulates an eagle’s caretaker. The flex sensors are located within …

Remote/Autonomous Sentry Gun Platform, Angelo Gagliardi, Dante Gagliardi

Electrical Engineering

This senior project involves the complete system design and construction of a "Nerf" sentry gun to replace an armed guard. We aimed to develop a compact and highly mobile defense system that allows operational flexibility. The sentry gun can autonomously track and shoot at moving targets, while also allowing a user to remotely access and control the gun via computer. The mobility, hardiness, and functionality of this system allows a reliable replacement for human beings in harsh and hostile environments; ultimately sparing a life.

Riley The Cat, Nicholas Zankich

Computer Engineering

There are many toys that exist that are comfort objects. Generally these are toys that are soft such as blankets, stuffed animals, and pillows. Robotic toys also exist such as games, interactive books, and instruments. There exists a crossover market that includes Furbys, Tomagachi pets, and Fur Real Friends. While being very popular, I believe that this crossover isn’t perfect, and that there is a lot of room for improvement. Riley (Figure 1) was created to make something that is both completely a robot and a comfort object.

Robotron, Fabian Rodriguez, Oscar Daniel Muneton, Adelaido Jimenez

Computer Engineering

Roborodentia 2012 is a competition where students and alumni could build an autonomous robot to perform a certain task for points. This report is about Robotron, the 3rd place winner of this competition, and how it came to be.

Project 308: Augmented Reality Mario Kart, Joseph Abad, David Allender, Joryl Calizo, Ryan Gaspar, Gavin Lee

Computer Engineering

Mario Kart is a popular go-kart racing game developed by Nintendo. The premise of the game is simple: drive a go-kart along a racetrack and reach the finish line before the other players. What makes this game unique, however, is the inclusion of weapons, traps, and other projectiles that a player can use to gain an advantage in the race. We have taken on the challenge of not only recreating this amazing game, but using the art of Augmented Reality to fully immerse the player in the full experience. Rather than play the game on a television screen with a …

Ultrasonic Shark-Tag Locator System For Iver2 Auv, Nathaniel Garcia

Computer Engineering

The purpose of this project is to develop a system for tracking an ultrasonic underwater transmitter that can be integrated into an IVER2 AUV to allow it to follow and monitor tagged sharks in the ocean for scientific research.

The system consists of a four main components including a shark-tag, two hydrophones, a filter/amplifier & threshold detector circuit, and a microcontroller.

This project, while not completing field testing and integration with the IVER2, is a proof of concept of a system that utilizes passive sonar to determine a bearing from the system to a shark-tag transmitter. Additionally, it devised several …