Hardware Systems Commons^™

Design Automation For Carbon Nanotube Circuits Considering Performance And Security Optimization, Lin Liu

Dissertations, Master's Theses and Master's Reports

As prevailing copper interconnect technology advances to its fundamental physical limit, interconnect delay due to ever-increasing wire resistivity has greatly limited the circuit miniaturization. Carbon nanotube (CNT) interconnects have emerged as promising replacement materials for copper interconnects due to their superior conductivity. Buffer insertion for CNT interconnects is capable of improving circuit timing of signal nets with limited buffer deployment. However, due to the imperfection of fabricating long straight CNT, there exist significant unidimensional-spatially correlated variations on the critical CNT geometric parameters such as the diameter and density, which will affect the circuit performance.

This dissertation develops a novel timing …

Mechanical Design And Optimization Of An Interactive Animatronic Bald Eagle, Eric Burns

Phi Kappa Phi Research Symposium (Archived)

Animatronics is a specialized sub-category of mechatronics, a fusion of mechanical and electrical engineering. The field has grown from small, individual projects into a major industry. As animatronics progress, mechanical engineers are pushed to design internal structures which occupy ever-decreasing spaces and to ensure designs can undergo maintenance and modifications smoothly. This research investigates methods of reducing space required for mechanisms and several other beneficial methods of development as well as varying satisfactions for audiences when exposed to actor-controlled systems rather than pre-scripted functions. The mechanical systems are designed using CAD software available at Georgia Southern. On-campus, resources are used …

El Capitán: Cal Poly Rose Float Digital Drive System, Gregory Raffi Baghdikian

Computer Engineering

In today’s world of smartphones, self-driving cars, and internet-connected coffee makers, it seems as if computers are contained in everything around us. These “embedded systems” have become critical components of our lives, improving everything about the things they control, from cost, to speed, to simplicity. One area that embedded systems has hardly gained a foothold is in the world of floatbuilding. Most of the floats in the Tournament of Roses Parade, including the one built jointly by Cal Poly San Luis Obispo and Cal Poly Pomona, are technologically very simple, using mostly analog components and rudimentary discrete digital logic to …

Pinpoint: Location Beacon And Tracking, Ezequiel Lopez Iii

Computer Engineering

The purpose of Pinpoint was to create a device that can collect and transmit location information for multiple users on a wireless network. The device would be used to keep track of and communicate with other users nearby. The final design includes a touchscreen display as a graphical user interface (GUI), an XBee RF module for wireless networking, a GPS receiver for location tracking, and a Programmable System on a Chip (PSoC) to control the modules.

Cal Poly Supermileage Electronic Fuel Injection, Alexander Pink

Electrical Engineering

Cal Poly Supermileage is a student-run engineering club that builds prototype gasoline vehicles optimized maximum fuel-efficiency. To power their vehicles, the Supermileage team makes use of single-cylinder, 4-stroke, electronically fuel-injected (EFI) gasoline engines. This report details the development, iterative design & test cycles, and integration of an EFI system for the Supermileage club. This project develops an EFI system that interfaces to the most common types of sensors found in the low-power Supermileage-range of engines, including throttle-position sensors, manifold absolute pressure sensors, gear-tooth hall-effect sensors, variable-reluctance position sensors, engine coolant temperature sensors, intake air temperature sensors, and exhaust oxygen sensors. …

Wireless Authentication Of Smart Doors Using Rfid, Austin A. Hentrup, Deyi Lu, Peter R. Roldan

Honors Thesis

In an increasingly interconnected world, the traditional metal lock-and-key method of securing homes and businesses is becoming more outdated and inconvenient when compared to modern solutions. Modern systems are smarter, faster, lighter, more secure and more integrated than ever before. Though the costs of Radio Frequency Identification (RFID) are shrinking overall, professional solutions remain prohibitively expensive. The aim of this project is to develop an inexpensive, secure, and internet-enabled RFID door authentication system. This is to transparently investigate the design limitations for these systems and help determine the ultimate feasibility of RFID growing to define the modern door-authentication standard.

Prevention Of Drone Jamming Using Hardware Sandboxing, Joshua Mead

Graduate Theses and Dissertations

In this thesis, we concern ourselves with the security of drone systems under jamming-based attacks. We explore a relatively new concept we previously devised, known as hardware sandboxing, to provide runtime monitoring of boundary signals and isolation through resource virtualization for non-trusted system-on-chip (SoC) components. The focus of this thesis is the synthesis of this design and structure with the anti-jamming, security needs of drone systems. We utilize Field Programmable Gate Array (FPGA) based development and target embedded Linux for our hardware sandbox and drone hardware/software system.

We design and implement our working concept on the Digilent Zybo FPGA, which …

Human Factors In The Development Of The Mobile Extreme Environment Research Station (Meers) Mission Control System (Mcs), Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the MEERS MCS were required to develop a novel interface for their product. During the development of the MCS, analytical human factors methods and display principles were implemented to create the user interface. The methods and principles were also used so the MCS had a user centered design. The MCS went through several iterations of design. This presentation discusses the development process of the MEERS MCS from a human factors standpoint.

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Forest Sign Maker, Victor Espinosa Iii, Kevin Ly, Lisa Yip

Mechanical Engineering

Executive Summary:

The Inyo National Forest is arguably one of the most beautiful locations in California, containing natural masterpieces such as Mount Whitney and the Ancient Bristlecone Pine Forest. Despite its magnificence, the Inyo National Forest can be a treacherous region. The Friends of the Inyo take pride in being able to facilitate the viewing experience for all outdoorsmen by maintaining the mountain trails, which includes providing adequate trail signage.

Unfortunately, there is a fundamental issue with the recent state of trail signage in the Inyo National Forest: the rate at which signs are being vandalized or naturally destroyed is …

Power Supply For Driving High Power Leds With Wireless Control, Joshua C. Avery

Computer Engineering

This project is the design of a power supply for driving high power light emitting diodes (LEDs) with wireless control. The project is divided into two sections, the power supply for driving the LED lights, and the wireless control and fan power supply.

Design And Development Of Two Component Hydrogel Ejector For Three-Dimensional Cell Growth, Thomas Dunkle, Jessica Deschamps, Connie Dam

Honors Scholar Theses

Hydrogels are useful in wound healing, drug delivery, and tissue engineering applications, but the available methods of injecting them quickly and noninvasively are limited. The medical industry does not yet have access to an all-purpose device that can quickly synthesize hydrogels of different shapes and sizes. Many synthesis procedures that have been developed result in the formation of amorphous hydrogels. While generally useful, amorphous hydrogels exhibit limited capability in tissue engineering applications, especially due to their viscous properties. This endeavor aims to modulate the appropriate gelation parameters, optimize the injection process, and create a prototype that allows for the extrusion …

Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen

Master's Theses

Synthetic Aperture Radar (SAR) has come into widespread use in several civilian and military applications. The focus of this paper is the military application of imaging point targets captured by an airborne SAR platform. Using the traditional SAR method of determining target motion by analyzing the difference between subsequent images takes a relatively large amount of processing resources. Using methods in this thesis, target motion can be estimated before even a single image is obtained, reducing the amount of time and power used by a significantly large amount. This thesis builds on work done by Brain Zaharri and David So. …

Disc Golf Locator, Christian Wallenfelsz, Shane Gamble, Noah Sanor, Brandon Linhart

Electrical and Computer Engineering Faculty Research

Disc golf is a game similar to traditional golf where players throw small plastic discs into chain-link nets. Disc golf courses cover several acres containing lakes, small wooded areas, large bushes, and grassy fields. It is not uncommon to accidentally throw a golf disc into the woods or bushes, so it is the goal of this project to create a device to locate the disc and make suggestions for the player to improve performance. A small device will be attached the disc which will track its location and flight characteristics. The device will contain a GPS receiver, an inertial measurement …

Comparing The Efficiency Of Heterogeneous And Homogeneous Data Center Workloads, Brandon Kimmons

College of Graduate Studies: Theses & Dissertations

Abstract

Information Technology, as an industry, is growing very quickly to keep pace with increased data storage and computing needs. Data growth, if not planned or managed correctly, can have larger efficiency implications on your data center as a whole. The long term reduction in efficiency will increase costs over time and increase operational overhead. Similarly, increases in processor efficiency have led to increased system density in data centers. This can increase cost and operational overhead in your data center infrastructure.

This paper proposes the idea that balanced data center workloads are more efficient in comparison to similar levels of …

Design Of An All-In-One Embedded Flight Control System, Joel D. Elmore

Theses and Dissertations

This thesis describes an all-in-one flight control system (FCS) that was designed for unmanned aerial vehicles (UAVs). The project focuses on the embedded hardware aspect of a stand-alone system with low-cost and reliability in mind.

Stargrazer One: A New Architecture For Distributed Maximum Power Point Tracking Of Solar Photovoltaic Sources, Edgard Munoz-Coreas

Theses and Dissertations--Electrical and Computer Engineering

The yield from a solar photovoltaic (PV) source is dependent on factors such as light and temperature. A control system called a maximum power point tracker (MPPT) ensures that the yield from a solar PV source is maximized in spite of these factors. This thesis presents a novel implementation of a perturb and observe (PO) MPPT.

The implementation uses a switched capacitor step down converter and a custom digital circuit implementation of the PO algorithm. Working in tandem, the switched capacitor step down converter and the custom digital circuit implementation were able to successfully track the maximum power point of …

Ultra-Fast, Autonomous, Reconfigurable Communication System, Paul Bupe Jr

College of Graduate Studies: Theses & Dissertations

The recent years have witnessed an increase in natural disasters in which the destruction of essential communication infrastructure has significantly affected the number of casualties. In 2005, Hurricane Katrina in the United States resulted in over 1,900 deaths, three million land-line phones disconnections, and more than 2000 cell sites going out of service. This incident highlighted an urgent need for a quick-deployment, efficient communication network for emergency relief purposes. In this research, a fully autonomous system to deploy Unmanned Aerial Vehicles (UAVs) as the first phase disaster recovery communication network for wide-area relief is presented. As part of this system, …

Optimizing Performance And Scalability On Hybrid Mpsocs, Hongyuan Ding

Graduate Theses and Dissertations

Hardware accelerators are capable of achieving significant performance improvement. But design- ing hardware accelerators lacks the flexibility and the productivity. Combining hardware accelerators with multiprocessor system-on-chip (MPSoC) is an alternative way to balance the flexibility, the productivity, and the performance. However, without appropriate programming model it is still a challenge to achieve parallelism on a hybrid (MPSoC) with with both general-purpose processors and dedicated accelerators. Besides, increasing computation demands with limited power budget require more energy-efficient design without performance degradation in embedded systems and mobile computing platforms. Reconfigurable computing with emerging storage technologies is an alternative to enable the optimization …

Improved Microrobotic Control Through Image Processing And Automated Hardware Interfacing, Archit R. Aggarwal, Wuming Jing, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Untethered submilliliter-sized robots (microrobots) are showing potential use in different industrial, manufacturing and medical applications. A particular type of these microrobots, magnetic robots, have shown improved performance in power and control capabilities compared to the other thermal and electrostatic based robots. However, the magnetic robot designs have not been assessed in a robust manner to understand the degree of control in different environments and their application feasibility. This research project seeks to develop a custom control software interface to provide a holistic tool for researchers to evaluate the microrobotic performance through advance control features. The software deliverable involved two main …

Foss Big Data Storage Solution, Nurdeen Salami

STAR Program Research Presentations

NASA projects require a reliable approach to store large volumes of data. Accordingly, it is crucial to adopt a lightweight, reliable, and scalable database. Current NASA databases bear costly license fees with undesirable speed and flexibility. The purpose of utilizing the AERO Institute as an IT test bed, or “Sandbox,” is to design, build, test, and implement software solutions prior to transfer to NASA projects. Cassandra coupled with the Astyanax API is a viable solution for storing big data. Store a minimum of 2GB of C-FOSS data in multiple file formats (.csv, .log, .xml, and .jpg). Use benchmark tests to …

Idpal – A Partially-Adiabatic Energy-Efficient Logic Family: Theory And Applications To Secure Computing, Mihail T. Cutitaru

Electrical & Computer Engineering Theses & Dissertations

Low-power circuits and issues associated with them have gained a significant amount of attention in recent years due to the boom in portable electronic devices. Historically, low-power operation relied heavily on technology scaling and reduced operating voltage, however this trend has been slowing down recently due to the increased power density on chips. This dissertation introduces a new very-low power partially-adiabatic logic family called Input-Decoupled Partially-Adiabatic Logic (IDPAL) with applications in low-power circuits. Experimental results show that IDPAL reduces energy usage by 79% compared to equivalent CMOS implementations and by 25% when compared to the best adiabatic implementation. Experiments ranging …

Battery Management System, Michael Desando, Kyle Woody

Electrical Engineering

Problem Statement:

There have been recent reports of multi-million dollar companies having to recall entire projects due to their BMS’s malfunctioning or operating incorrectly. The purpose of this project is to analyze the future of batteries, the Lithium-Ion cell, and to exercise a BMS to better understand its capabilities and possible cases for errors. Lithium ion batteries are intolerant of overcharge and overdischarge. Abuse of this kind can result in high temperatures, venting of gases, fire, or explosion. Therefore battery management systems have been devised to prevent such abuse. Recent events such as fires on the Boeing Dreamliner and the …

All Purpose Mobile Gps, James C. Smith, Matt Weege, Kevin Peters

Electrical Engineering

The aim of the All Purpose Mobile GPS (The System) is to create a GPS tracking device that can accurately record location and calculate velocity, distance traveled and elevation change even when the satellite signal is lost. This data can later overlay on existing internet-based maps illustrating a trip to oneself or others. The portable tracker consumes very little power achieving several days’ worth of power in a single charge. A solar cell provides a quick battery boost in a pinch. SD Card storage increases compatibility with computers and other forms of data transfer. Data processing, such as viewing the …

Ad-Hoc Hid: Modular Wireless Human Interface Device, Joseph A. Mazzanti

Electrical Engineering

Ad-Hoc HID is a modular, reprogrammable Human Interface Device. This device is intended to function as a keyboard, gamepad, or mouse, according to the user's needs. The final project is intended to be switch agnostic, making the final product adaptable to the user’s needs.

Design Of A Low Power Cargo Security Device Using A Micropower Ultra-Wideband Impulse Radar, Brian M. Wihl

Master's Theses

Each year, thousands of cargo containers are broken into during shipping, costing billions of dollars in lost and damaged goods. In addition to removing its contents, intruders can also add unwanted and dangerous materials to a container, posing a threat to National Security. The possibilities of cargo container break-ins require that the containers go through check points at which they are physically searched. These searches often require the opening of the container, unloading and inspecting all cargo, and then loading the container and resealing it. This is a long and costly process.

Because of the high costs of break-ins and …

On High-Performance Parallel Fixed-Point Decimal Multiplier Designs, Ming Zhu

UNLV Theses, Dissertations, Professional Papers, and Capstones

High-performance, area-efficient hardware implementation of decimal multiplication is preferred to slow software simulations in a number of key scientific and financial application areas, where errors caused by converting decimal numbers into their approximate binary representations are not acceptable.

Multi-digit parallel decimal multipliers involve two major stages: (i) the partial product generation (PPG) stage, where decimal partial products are determined by selecting the right versions of the pre-computed multiples of the multiplicand, followed by (ii) the partial product accumulation (PPA) stage, where all the partial products are shifted and then added together to obtain the final multiplication product. In this thesis, …

Vehicular Motion Sensor: Developing A Wide-Range Motion Sensing Alarm System, Joshua Isaacson

Senior Honors Theses

Vehicular safety has become a serious concern in recent years. Many drivers have difficulty backing out of parking spaces, especially when large trucks and sport utility vehicles block the peripheral view from smaller vehicles. This can lead to accidents and pedestrian injuries when drivers are unable to see or do not pay careful attention to their surroundings.

Vehicular motion sensor systems can alert drivers of approaching obstacles when attempting to back out of parking spaces with limited visibility. This thesis aims to explain the limitations of current systems and the research conducted by the author to develop a prototype for …

Digital Control Board For Phased Array Antenna Beam Steering In Adaptive Communication Applications, Mayur Bansal

Master's Theses

The application of adaptive communication techniques for mobile communications has attracted considerable interest in the last decade. One example of these techniques is spatial filtering through planar antenna array beam forming.

This thesis describes the development of a digital system that adaptively controls a phased array antenna. The radiating structure of the phased antenna array is tetrahedral-shaped and contains four antenna elements on each of its three faces. The overall system comprises of a digital control board with an external computer interface, an RF control board, and the phased antenna array. The RF controls the main lobe direction on the …