Digital Communications and Networking Commons^™

The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette

Master's Theses

As wireless protocols become easier to implement, more products come with wireless connectivity. This latest push for wireless connectivity has left a gap in the development of the security and the reliability of some protocols. These wireless protocols can be used in the growing field of IoT where wireless sensors are used to share information throughout a network. IoT is being implemented in homes, agriculture, manufactory, and in the medical field. Disrupting a wireless device from proper communication could potentially result in production loss, security issues, and bodily harm. The 802.15.4/ZigBee protocol is used in low power, low data rate, …

Dynamic Video Streaming For Nano Quadcopters, Shane Daniel Kent, Ryan Weideman, Nicholas Kimball

Computer Engineering

The objective of this project was to develop a system that streams real-time video from a Crazyflie 2.0 nano quadcopter. We discuss the motivation behind the project including applications to swarm robotics and computer vision research. We highlight the initial research and design goals that guided the development of the system such as hardware selection and system specifications. We detail the software and hardware subsystems that we implemented including the video-streaming board, firmware, and video-streaming user application. We examine the performance of the final system and discuss the limitations imposed by the hardware. We conclude by describing future work that …

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …

Designing A Distributed Network Of Air Quality Sensors, Kaylee Rauso

Computer Science and Computer Engineering Undergraduate Honors Theses

The deterioration of human and environmental health due to worsening outdoor air quality is a serious global threat. A step towards improving the current state of ambient air worldwide is the increased collection of data for government policy, research, and general public use. Currently, reliable data is only collected at a handful of sites in the state of Arkansas and sparsely across the country. The purpose of this project was to design an inexpensive air quality sensor to saturate entire cities with nodes which transmit air data to a sensor for a web application to display. The prototype node was …

Securing Soft Ips Against Hardware Trojan Insertion, Thao Phuong Le

Graduate Theses and Dissertations

Due to the increasing complexity of hardware designs, third-party hardware Intellectual Property (IP) blocks are often incorporated in order to alleviate the burden on hardware designers. However, the prevalence use of third-party IPs has raised security concerns such as Trojans inserted by attackers. Hardware Trojans in these soft IPs are extremely difficult to detect through functional testing and no single detection methodology has been able to completely address this issue. Based on a Register-Transfer Level (RTL) and gate-level soft IP analysis method named Structural Checking, this dissertation presents a hardware Trojan detection methodology and tool by detailing the implementation of …

Annual Report 2017-2018, Depaul University College Of Computing And Digital Media

CDM Annual Reports

LETTER FROM THE DEAN

I am pleased to share with you the College of Computing and Digital Media’s (CDM) 2017-18 annual report, highlighting the many achievements across our community. It was a big year. We began offering five new programs (two bachelor’s, two master’s, and one PhD) across our three schools, in addition to several new certificate programs through our Institute for Professional Development. We built new, cutting-edge spaces to support these and other programs— most notably a 4,500 square-foot makerspace, a robotics and medical engineering lab, an augmented and virtual reality lab, and plans for a cyber-physical systems project …

Event And Time-Triggered Control Module Layers For Individual Robot Control Architectures Of Unmanned Agricultural Ground Vehicles, Tyler Troyer

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Automation in the agriculture sector has increased to an extent where the accompanying methods for unmanned field management are becoming more economically viable. This manifests in the industry’s recent presentation of conceptual cab-less machines that perform all field operations under the high-level task control of a single remote operator. A dramatic change in the overall workflow for field tasks that historically assumed the presence of a human in the immediate vicinity of the work is predicted. This shift in the entire approach to farm machinery work provides producers increased control and productivity over high-level tasks and less distraction from operating …

One-To-Cloud One-Time Pad Data Encryption: Introducing Virtual Prototyping With Pspice, Paul Tobin, Lee Tobin, Roberto Gandia Blanquer Dr, Michael Mckeever, Jonathan Blackledge

Conference papers

In this paper, we examine the design and application of a one-time pad encryption system for protecting data stored in the Cloud. Personalising security using a one-time pad generator at the client-end protects data from break-ins, side-channel attacks and backdoors in public encryption algorithms. The one-time pad binary sequences were obtained from modified analogue chaos oscillators initiated by noise and encoded client data locally. Specific ``one-to-Cloud'' storage applications returned control back to the end user but without the key distribution problem normally associated with one-time pad encryption. Development of the prototype was aided by ``Virtual Prototyping'' in the latest version …

Skin Tone Tracking Device (Chromaband), Ziyang Bian

Computer Engineering

It’s long been said that your skin is a window into your health and with many illnesses the first signs of trouble actually show up in your skin. So if we have this natural warning system, then why isn’t anyone able to effectively use it to predict changes in our health? The problem is that currently there is no reliable way to accurately measure the change in skin tone and how these changes may or may not change with variations in health. This project’s aim is to design and develop a device that will record the changes in a user’s …

Smartgarden, Samuel S. Lees, Matthew T. Lindly

Computer Engineering

The problem that the SmartGarden project seeks to solve is the challenge of watering succulents correctly and maintaining consistent plant health. Too much water can cause root rot and drowning while too little water can cause dehydration and starvation.
The SmartGarden solves this common problem by configuring a Raspberry Pi to measure soil moisture, store the data to an AWS server in the cloud, and water the succulent when necessary, informing the user by providing both a web-interface and a variety of notifications.

Blend It Wine Blending Distribution System, Connor Clarry, Russell Temple, Matt Moren

Mechanical Engineering

No abstract provided.

Micro-Spi Sediment Profile Imaging Micro-Inspector, Andrew P. Corvin, Caleb T. Davies, Matt R. Ferrari

Mechanical Engineering

This project was proposed by Dr. Brian Paavo through a desire to more easily study the benthic sediment layers of the ocean. To do so, he asked us to build a simple and compact machine for use in sediment profile imagery (SPI). Although devices like this already exist, they are all large scale devices that require a ship with a crane to deploy, which is expensive and time consuming. Instead, he desired a “micro” SPI, which is capable of being deployed from a small vessel that can easily navigate shallow waters. Our interpretation of these requirements was as follows: a …

Project Pradio, Trigg T. La Tour

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper examines the design and manufacturing of a device that allows two or more users to share a wireless audio stream. Effectively, this allows a group of people to listen to the same audio in a synchronized manner. The product was unable to be completed in the allotted time. Regardless, significant progress was made and valuable insight into the circuit board design process was gained.

Automation In Entertainment: Concept, Design, And Application, Ryan Thally

Undergraduate Honors Theses

The focus of this thesis is to explore the automation technology used in the modern entertainment industry. Upon completion of my thesis, I will deliver a working prototype of the chosen technology and present its capabilities in a choreographed show.

Software Updates To A Multiple Autonomous Quadcopter Search System (Maqss), Jared Speck, Toby Chan

Computer Engineering

A series of performance-based and feature implementation software updates to an existing multiple vehicle autonomous target search system is outlined in this paper. The search system, MAQSS, is designed to address a computational power constraint found on modern autonomous aerial platforms by separating real-time and computationally expensive tasks through delegation to multiple multirotor vehicles. A Ground Control Station (GCS) is also described as part of the MAQSS system to perform the delegation and provide a low workload user interface. Ultimately, the changes to MAQSS noted in this paper helped to improve the performance of the autonomous search mission, the accuracy …

Teaching The Internet Of Things: Bridging A Path From Cpe329, Steven Han, Rafael Lopez

Computer Engineering

“The ability to connect, communicate with, and remotely manage an incalculable number of networked, automated devices via the Internet is becoming pervasive, from the commercial kitchen to the residential basement room to the arm of the fitness buff.” - WSO2

In this report, we will investigate procedures and technologies used in IoT. A variety of cloud platforms will be described to demonstrate its strengths and usage on IoT applications. Furthermore, demonstrate the most popular hardware being used in several of these applications. This report is aimed to give a good understanding on what it takes to put together an IoT …

Duck Watch: A Smart System For Public Lap Pools, Daniel Griffith, Jill Thetford

Computer Engineering

This paper presents Duck Watch, a proof of concept for a smart swimming pool. With our system, a swimmer will be able to log on to our website prior to leaving his or her house to help them decide if the conditions are favorable to go to a public lap swimming pool. Our system will inform the user of a number of environmental factors such as water temperature, exterior temperature, and humidity, as well as whether or not there are any open lanes currently.

El Capitán: Cal Poly Rose Float Digital Drive System, Gregory Raffi Baghdikian

Computer Engineering

In today’s world of smartphones, self-driving cars, and internet-connected coffee makers, it seems as if computers are contained in everything around us. These “embedded systems” have become critical components of our lives, improving everything about the things they control, from cost, to speed, to simplicity. One area that embedded systems has hardly gained a foothold is in the world of floatbuilding. Most of the floats in the Tournament of Roses Parade, including the one built jointly by Cal Poly San Luis Obispo and Cal Poly Pomona, are technologically very simple, using mostly analog components and rudimentary discrete digital logic to …

Oluso, Diego Fernandez, Tyler Heucke, Nishant Mattu, Michael Roesch

Computer Engineering

Oluso is a new startup offering affordable, inexpensive technology to empower the individual. Our product is designed to keep the user in contact with someone close to them in emergency situations. Over the course of the past several months we have performed interviews with both individuals who may be interested in this product as well as organizations who may be interested in purchasing this product for their members. Our product is nearing completion and all of the companies we have interviewed have displayed a significant amount of interest in our product. The combination of easy communication and peace of mind …

Pinpoint: Location Beacon And Tracking, Ezequiel Lopez Iii

Computer Engineering

The purpose of Pinpoint was to create a device that can collect and transmit location information for multiple users on a wireless network. The device would be used to keep track of and communicate with other users nearby. The final design includes a touchscreen display as a graphical user interface (GUI), an XBee RF module for wireless networking, a GPS receiver for location tracking, and a Programmable System on a Chip (PSoC) to control the modules.

Stand, Lisa Yip

Computer Engineering

With busy lives, people sometimes forget to take breaks for multiple hours at a time. The purpose of this project is to remind the user to move around every hour if they have not already. To do so, stand will be a light weight fitness tracker that will detect the number of steps made within an hour. If the step count, dependent on goals, is not met then a vibration motor will gently remind them to take a break and walk. The data throughout the day will be shown on an iOS application where the user will be able to …

Wireless Authentication Of Smart Doors Using Rfid, Austin A. Hentrup, Deyi Lu, Peter R. Roldan

Honors Thesis

In an increasingly interconnected world, the traditional metal lock-and-key method of securing homes and businesses is becoming more outdated and inconvenient when compared to modern solutions. Modern systems are smarter, faster, lighter, more secure and more integrated than ever before. Though the costs of Radio Frequency Identification (RFID) are shrinking overall, professional solutions remain prohibitively expensive. The aim of this project is to develop an inexpensive, secure, and internet-enabled RFID door authentication system. This is to transparently investigate the design limitations for these systems and help determine the ultimate feasibility of RFID growing to define the modern door-authentication standard.

Improving The Security Of Wireless Sensor Networks, Mauricio Tellez Nava

Masters Theses, 2010-2019

With the rapid technological advancements of sensors, Wireless Sensor Networks (WSNs) have become the main technology for the Internet of Things (IoT). We investigated the security of WSNs in an environmental monitoring system with the goal to improve the overall security. We implemented a Secure Temperature Monitoring System (STMS), which served as our investigational environment. Our results revealed a security flaw found in the bootstrap loader (BSL) password used to protect firmware in the MSP430 MCU chips. We demonstrated how the BSL password could be brute forced in a matter of days. Furthermore, we illustrate how an attacker can reverse …

Bluetooth Low Energy Platform With Simblee, Calvin W. Freeman

Computer Science and Computer Engineering Undergraduate Honors Theses

Bluetooth Low Energy provides a platform for many developers to implement low power communication for a wide range of applications. The Internet of Things (IoT) is an emerging concept that is gaining traction in the world of embedded systems. Bluetooth Low Energy is one of the latest enablers of this movement and the Simblee module improves BLE accessibility. This thesis provides an evaluation of the average power consumption the Simblee uses in different use cases. By leveraging one of the Simblee’s most notable features, the Ultra Low Power mode, very low power consumption can be achieved, potentially increasing battery life …

Human Factors In The Development Of The Mobile Extreme Environment Research Station (Meers) Mission Control System (Mcs), Rebecca Demarco

Human Factors and Applied Psychology Student Conference

The developers for the MEERS MCS were required to develop a novel interface for their product. During the development of the MCS, analytical human factors methods and display principles were implemented to create the user interface. The methods and principles were also used so the MCS had a user centered design. The MCS went through several iterations of design. This presentation discusses the development process of the MEERS MCS from a human factors standpoint.

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Forest Sign Maker, Victor Espinosa Iii, Kevin Ly, Lisa Yip

Mechanical Engineering

Executive Summary:

The Inyo National Forest is arguably one of the most beautiful locations in California, containing natural masterpieces such as Mount Whitney and the Ancient Bristlecone Pine Forest. Despite its magnificence, the Inyo National Forest can be a treacherous region. The Friends of the Inyo take pride in being able to facilitate the viewing experience for all outdoorsmen by maintaining the mountain trails, which includes providing adequate trail signage.

Unfortunately, there is a fundamental issue with the recent state of trail signage in the Inyo National Forest: the rate at which signs are being vandalized or naturally destroyed is …

M-1: The Mealy Open Source Custom Midi Controller, Garrett Leung, Darren O. Mistica

Electrical Engineering

With the high price of large mixing consoles, aspiring artists are restricted to using a mouse to control digital facsimiles of knobs, faders, switches, and buttons. Though using the software controls is considered a simple task, dedicated hardware allows for tactile, visual, and utility. At a low cost, the heart of the MTech M-1 can be customized and placed into any shell with any combination of controls as possible with the underlying platform.

Modern MIDI controllers require significant physical space due to their preset button layout and space consuming setups. Despite their high price, modern MIDI controllers have only one …

Remote Mobile Screen (Rms): An Approach For Secure Byod Environments, Santiago Manuel Gimenez Ocano

School of Computing: Dissertations, Theses, and Student Research

Bring Your Own Device (BYOD) is a policy where employees use their own personal mobile devices to perform work-related tasks. Enterprises reduce their costs since they do not have to purchase and provide support for the mobile devices. BYOD increases job satisfaction and productivity in the employees, as they can choose which device to use and do not need to carry two or more devices.

However, BYOD policies create an insecure environment, as the corporate network is extended and it becomes harder to protect it from attacks. In this scenario, the corporate information can be leaked, personal and corporate spaces …