Digital Circuits Commons^™

Reproducing And Evaluating Charger Surfing: Robustness Of Smartphone Charging-Line Side-Channels, Colby M. Watts

Master's Theses

Smartphones are frequently connected to external, untrusted charging hardware, creating opportunities for side-channel attacks that do not require malware or direct access to device data. Charger Surfing, a recently proposed charging-line power analysis side-channel attack, reported high accuracy in inferring touchscreen input from voltage measurements collected from a smartphone’s charging cable; however, the reproducibility and robustness of these results under different conditions remain unclear. This thesis presents an independent replication and evaluation of Charger Surfing, including the development of an end-to-end data collection pipeline consisting of a modified charging cable, oscilloscope-based recordings, custom Android app, automated trace processing, and convolutional …

Polysaber: A Custom Reactive Lightsaber Soundboard, Pedro B. Medeiros

Computer Engineering

The PolySaber project was developed as a custom reactive lightsaber control system built as a fully custom PCB design. The purpose of the project was to create a lower-cost and more customizable alternative to commercially available lightsaber soundboards while simultaneously providing hands-on experience in PCB design, embedded systems development, and hardware integration. Commercial lightsaber soundboards are expensive, proprietary, and difficult for hobbyists to customize. The PolySaber project addresses this by creating a modifiable hardware platform built around the ESP32 microcontroller. The system supports programmable firmware, RGB NeoPixel blade control, motion sensing, reactive swing and clash effects, onboard audio amplification, and …

A Capability Maturity Model For Artificial Intelligence Integration In Supply Chain Management, Lordt Becklines

Dissertations

Artificial Intelligence (AI) is transforming Supply Chain Management (SCM), yet many organizations struggle to assess their readiness for AI adoption and to understand how AI capabilities develop across maturity stages. This dissertation addresses this gap by developing a Capability Maturity Model (CMM) for AI integration in SCM, grounded in Organizational Information Processing Theory (OIPT), the Resource-Based View, and related capability frameworks. The model provides a structured approach for evaluating an organization's information-processing requirements, resource configurations, and alignment needed for effective AI-enabled supply chain operations.

Using a design science research approach, the AI-SCM CMM and its associated assessment instrument were derived …

3d Printed Portable Automatic Pill Dispenser​, Amber M. Ocasio

Publications and Research

Medication adherence is a major public health concern, particularly among patients with chronic illnesses. Reports from the National Institutes of Health indicate that adherence rates are significantly lower for chronic conditions, with patients taking only ~50% of medications prescribed. Unintentional non-adherence—such as forgetting doses—is more prevalent (62.9%, 47.1%, 46.9%) than intentional non-adherence, and the consequences include medication waste, disease progression, reduced functional abilities, lower quality of life, and increased reliance on medical resources. Because existing automatic pill dispensers cost over $100 on average, they remain inaccessible for many lower-income patients who could benefit from such technology. This project addresses this …

Exploring Smart Thermostat, Don P. Dang

2024 Fall Honors Capstone Projects - Archive

This study examines the security, privacy, and compatibility challenges associated with smart thermostats in smart home systems. Smart thermostats, as part of the growing Internet of Things (IoT) ecosystem, face vulnerabilities such as unauthorized access, data breaches, and inconsistent security protocols. Using a mixed-methods approach, this research evaluates encryption techniques, communication protocols (Zigbee, Z-Wave, Wi Fi), and user behaviors that impact system security and efficiency. Key findings indicate that 35% of users are concerned about hacking risks, while 25% express data privacy concerns. Many users lack awareness of security measures, such as firmware updates and password management, which increases vulnerabilities. …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Towards Multipronged On-Chip Memory And Data Protection From Verification To Design And Test, Senwen Kan, Jennifer Dworak

Computer Science and Engineering Theses and Dissertations

Modern System on Chips (SoCs) generally include embedded memories, and these memories may be vulnerable to malicious attacks such as hardware trojan horses (HTHs), test access port exploitation, and malicious software. This dissertation contributes verification as well as design obfuscation solutions aimed at design level detection of memory HTH circuits as well as obfuscation to prevent HTH triggering for embedded memory during functional operation. For malicious attack vectors stemming from test/debug interfaces, this dissertation presents novel solutions that enhance design verification and securitization of an IJTAG based test access interface. Such solutions can enhance SoC protection by preventing memory test …

Design Project: 3d Printer/Injection Molder Hybrid, Lee Paolucci, Luke Everhart, Brandon Leap, Karson Lorey

Williams Honors College, Honors Research Projects

In the realm of rapid, small-scale prototyping, there are a few main factors that drive decisions to invest resources in technology to make that prototyping possible. Cost and ease of use are two of the most influential when looking at most SMEs (Small to Medium-sized Enterprises). The U.S. Small Business Administration defines an SME as smaller than 1,250 employees. According to An Assessment of Implementation of Entry-Level 3D Printers from the Perspective of Small Businesses, 59% of small manufacturers had implemented 3D printers as of 2014. However, no matter what technology is used in rapid prototyping, there are common …

Side Channel Attack Counter Measure Using A Moving Target Architecture, Jithin Joseph

Electrical and Computer Engineering ETDs

A novel countermeasure to side-channel power analysis attacks called Side-channel Power analysis Resistance for Encryption Algorithms using DPR or SPREAD is investigated in this thesis. The countermeasure leverages a strategy that is best characterized as a moving target architecture. Modern field programmable gate arrays (FPGA) architectures provide support for dynamic partial reconfiguration (DPR), a feature that allows real-time reconfiguration of the programmable logic (PL). The moving target architecture proposed in this work leverages DPR to implement a power analysis countermeasure to side-channel attacks, the most common of which are referred to as differential power analysis (DPA) and correlation power analysis …

Annual Report 2020-2021, Depaul University College Of Computing And Digital Media

CDM Annual Reports

LETTER FROM THE DEAN

As I write this letter during the beginning of the 2021–22 academic year, we have started to welcome the majority of our students to campus— many for the very first time, and some for the first time in a year and a half. It has been wonderful to be together, in-person, again. Four quarters of learning and working remotely was challenging, to be sure, but I have been consistently amazed by the resilience, innovation, and hard work of our students, faculty, and staff, even in the most difficult of circumstances. This annual report, covering the 2020–21 …

Models And Methods Of Designing Human-Machine Interaction-Oriented Interfaces, Ozod Radjabov, Shakhrillo Bobokulov, Behruz Boboqulov, Hojiyev Sunatullo

Bulletin of TUIT: Management and Communication Technologies

Formalization approaches of user interface design (UID) in conjunction with model driven techniques aim to improve the usability in terms of conformity to standards or style guides and to leverage code generation of interactive software systems, so that various UI platforms for web, desktop or mobile Applications are supported. Because large parts of the UI are described platform independent instead of platform dependent implementations, re-usability of the UI concept is also improved. However, UI formalization requires the usage of a formal UI description language and a higher level of abstractness compared to concrete UI code. These languages need to be …

Annual Report 2019-2020, Depaul University College Of Computing And Digital Media

CDM Annual Reports

LETTER FROM THE DEAN

As I write this letter wrapping up the 2019-20 academic year, we remain in a global pandemic that has profoundly altered our lives. While many things have changed, some stayed the same: our CDM community worked hard, showed up for one another, and continued to advance their respective fields. A year that began like many others changed swiftly on March 11th when the University announced that spring classes would run remotely. By March 28th, the first day of spring quarter, we had moved 500 CDM courses online thanks to the diligent work of our faculty, staff, …

Improved Study Of Side-Channel Attacks Using Recurrent Neural Networks, Muhammad Abu Naser Rony Chowdhury

Boise State University Theses and Dissertations

Differential power analysis attacks are special kinds of side-channel attacks where power traces are considered as the side-channel information to launch the attack. These attacks are threatening and significant security issues for modern cryptographic devices such as smart cards, and Point of Sale (POS) machine; because after careful analysis of the power traces, the attacker can break any secured encryption algorithm and can steal sensitive information.

In our work, we study differential power analysis attack using two popular neural networks: Recurrent Neural Network (RNN) and Convolutional Neural Network (CNN). Our work seeks to answer three research questions(RQs):

RQ1: Is it …

Investigating The Effect Of Detecting And Mitigating A Ring Oscillator-Based Hardware Trojan, Lakshmi Ramakrishnan

Electrical Engineering Theses and Dissertations

The outsourcing of the manufacturing process of integrated circuits to fabrications plants all over the world has exposed these chips to several security threats, especially at the hardware level. There have been instances of malicious circuitry, such as backdoors, being added to circuits without the knowledge of the chip designers or vendors. Such threats could be immensely powerful and dangerous against confidentiality, among other vulnerabilities.

Defense mechanisms against such attacks have been probed and defense techniques have been developed. But with the passage of time, attack techniques have improved immensely as well. From directly observing the inputs or outputs, adversaries …

Investigating On Through Glass Via Based Rf Passives For 3-D Integration, Libo Qian, Jifei Sang, Yinshui Xia, Jian Wang, Peiyi Zhao

Mathematics, Physics, and Computer Science Faculty Articles and Research

Due to low dielectric loss and low cost, glass is developed as a promising material for advanced interposers in 2.5-D and 3-D integration. In this paper, through glass vias (TGVs) are used to implement inductors for minimal footprint and large quality factor. Based on the proposed physical structure, the impact of various process and design parameters on the electrical characteristics of TGV inductors is investigated with 3-D electromagnetic simulator HFSS. It is observed that TGV inductors have identical inductance and larger quality factor in comparison with their through silicon via counterparts. Using TGV inductors and parallel plate capacitors, a compact …

Improving System-On-Chip Test Networks For: Bandwidth, Security, And Power, Saurabh Gupta

Computer Science and Engineering Theses and Dissertations

Modern System-on-Chips (SoCs) provide benefits such as reduction in overall system cost, and size, increased performance, and lower power consumption. Increasing complexity of these Integrated Circuits (ICs) has resulted in a higher probability of manufacturing defects. Manufacturing defects can result in the faulty operation of a system. Thus, it is essential to test an IC after it is manufactured to detect any possible faults in it. These SoCs include on-chip embedded instruments that can be used for test, debug, diagnosis, validation, monitoring, characterization, configuration, or functional purposes. IEEE 1687 Std. (IJTAG) provides a standard interface for the reconfigurable access and …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

One-To-Cloud One-Time Pad Data Encryption: Introducing Virtual Prototyping With Pspice, Paul Tobin, Lee Tobin, Roberto Gandia Blanquer Dr, Michael Mckeever, Jonathan Blackledge

Conference papers

In this paper, we examine the design and application of a one-time pad encryption system for protecting data stored in the Cloud. Personalising security using a one-time pad generator at the client-end protects data from break-ins, side-channel attacks and backdoors in public encryption algorithms. The one-time pad binary sequences were obtained from modified analogue chaos oscillators initiated by noise and encoded client data locally. Specific ``one-to-Cloud'' storage applications returned control back to the end user but without the key distribution problem normally associated with one-time pad encryption. Development of the prototype was aided by ``Virtual Prototyping'' in the latest version …

A System For Monitoring And Managing Indoor Air Quality And Environmental Conditions, Ali Ibrahim

Boise State University Theses and Dissertations

The quality of indoor air depends on different types of pollutant sources existing in a semi-enclosed environment. The sources can be biological, chemical, or toxic pollutants. These sources can cause health issues and discomfort for occupants. One of the indicators of poor indoor air quality is Carbon Dioxide (CO₂). CO₂ can be used to indicate the indoor air exchange rate. The lack of air exchange means higher levels of CO₂. High levels of indoor particulates can also be an indication of poor air quality. Due to the lack of fresh air, air circulation, and air …

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

Seizure Tracker, Zachary Reardon

Computer Engineering

The goal of this project is to make a Module that enables anyone watching a person with disabilities to record any seizure that this person has under their care. Then when the Doctor/parent receives their patient/kid they are able to download all the seizures that their patient/kid had while they were away. The Doctor/parent then has the exact time, the duration of the seizure, and the type of seizure for all the seizures that have occurred while they were away from their patient/kid. From this data it is possible that the Doctor may see some sort of patterns that enables …

Mos Current Mode Logic (Mcml) Analysis For Quiet Digital Circuitry And Creation Of A Standard Cell Library For Reducing The Development Time Of Mixed Signal Chips, David Marusiak

Master's Theses

Many modern digital systems use forms of CMOS logical implementation due to the straight forward design nature of CMOS logic and minimal device area since CMOS uses fewer transistors than other logic families. To achieve high-performance requirements in mixed-signal chip development and quiet, noiseless circuitry, this thesis provides an alternative toCMOSin the form of MOS Current Mode Logic (MCML). MCML dissipates constant current and does not produce noise during value changing in a circuit CMOS circuits do. CMOS logical networks switch during clock ticks and with every device switching, noise is created on the supply and ground to deal with …

Sifteo Spice, Ikenga Kenneth Ugo

Computer Engineering

Sifteo SPICE is an application built on the Sifteo platform with the purpose of aiding in the learning of basic circuits. Traditionally, circuit theory is taught to students in two different methods, lectures and laboratory exercises. Lectures focus on auditory and visual learning and are largely passive learning. Lab experiments allow students to physically interact with the circuits, and learn visually through viewing output waveforms from simulators or on measurement devices.[3] The goal of the Sifteo SPICE project is to develop a physical system for virtual, real-time SPICE simulation that mimics the laboratory experience. In Sifteo SPICE, each individual Sifteo …

Bluemote!, Philip Kaye

Computer Engineering

In today’s society, our mobile phones are an extremely useful device when we are on the go and away from our homes; however, when we return home, our smart phone becomes just a communication tool again. Home automation is inevitable, and it will find its way into every house. The first person to commercialize it to the point where it is as easy to set-up and as affordable as a home router will end up breaking this slow trend. The key to this success is the smart phone; this should end up being the most expensive piece of hardware for …

Development Of A Cubesat Payload To Model Particle Dampening In Space: Design And Implementation Of Software For Cp7, Daniel Walker

Computer Engineering

The California Polytechnic State University CubeSat student research & development group, PolySat, is currently in a mature development stage of a single unit CubeSat designated CP7. The CP7 mission implements a scientific payload designed to characterize particle dampers in microgravity conditions. When subjected to vibration, the momentum exchanges and frictional forces of the particles create a damping effect that can be optimized to suit a number of applications over a broad frequency and amplitude range. In space based applications, particle dampers would serve as a robust and simple device to eliminate jitter in optical assemblies and other sensitive instrumentation. This …

Synthesis Minimizations And Mesh Algorithm Selection: An Extension Of The Ultrasonic 3d Camera, Taylor Johnson

Renée Crown University Honors Thesis Projects - All

Statement of Purpose

The purpose of this Capstone project was to perform synthesis minimizations and optimal mesh algorithm selection for some of the digital components of a prototype Ultrasonic 3D Camera, the subject of my group senior design project for computer engineering. Both of the high-level design tasks that I performed were unnecessary for the scope of the senior design class, whose focus was simply to perform a proof-of-concept or create a basic, functioning prototype. The steps I took in performing synthesis optimizations and mesh algorithm selection went beyond the scope of the senior project, by doing the polishing that …