Computer and Systems Architecture Commons^™

Set-Top Box Simulator, Philip Tyler

Computer Engineering

This report presents a python-based Set-top box simulation program utilizing a Simulation library called SimPy (See Appendix 1) to simulate real-time operation of a Set-top Box, or DVR. A graphical user interface, designed with PyQt4, allows a user to customize many simulation parameters such as hard drive speeds, buffer sizes, length of simulation, etc. The GUI also shows the user any errors that occur during the simulation such as buffer overflows/underflows. The results of this simulator lie within 85%-95% accuracy depending on the user-input parameters. With this simulation program, a Set-top box hardware or firmware developer can interchange the scheduling …

Bluelock: A Secure Bluetooth Operated Padlock, Trever Mckee

Computer Engineering

For this project a secure, battery operated, Bluetooth operated padlock was created. The project included both the hardware to integrate with a padlock and an Android application used to interface with the hardware. In order to make the padlock secure both AES encryption and challenge response authentication were used for secure message passing between the device and the Android phone. The project also included power consumption and sustainability tuning including exploring Arduino sleep states and integrating the project with a solar charging unit.

Implementing A Matlab Based Attitude Determination Algorithm In C Within The Polysat Software Architecture, Dominic Bertolino

Computer Engineering

This project focuses on one component within a complete attitude determination and control system (ADCS) for a small satellite. The component consists of porting the algorithm that determines the current attitude of the satellite developed by AERO students / team members. The original algorithm has been developed in MATLAB code. The actual algorithm will be simulated and tested in MATLAB by the AEROs. The porting consisted of integrating the pieces into the custom PolySat software environment in C. Testing was done to verify the ported component corresponded to the original MATLAB component as well as verify its runtime on the …

Roborodentia Scoring System, Justin Kikuchi

Computer Engineering

Every year at Cal Poly there is a robotics competition called Roborodentia . Roborodentia is sponsored by various industry leaders to provide a valuable and fun learning experience for Cal Poly students and alumni. The competition is held during the Cal Poly open house and draws a large number of spectators. In order to provide the spectators with a fun experience, it is necessary to present them with a live scoreboard, with visual and auditory effects.

The objective of this senior project was to design and build a fully functional scoreboard and tournament bracket with real-time scoring and timer. The …

Isus - An Autonomous Off-Road Balancing Robot - High Level Software And Components Implementation, Kent Williams

Computer Engineering

The ISUS Mobile Robot is a balancing off-road mobile robotic vehicle capable of driving while balancing on two wheels in rough and changing terrain. The robot can be operated over WI-FI via a computer.

A Web-Based Approach To Music Library Management, Jason Young

Computer Engineering

This application utilizes modern standards developing in web browsers to create a desktop-like application for managing a music library online. The server side application is written in a model-view-controller style using Python backed by a MySQL database. The client side JavaScript was designed around a modular concept interfacing several third-party frameworks and libraries. By taking advantage of developing browser features such as persistent local storage, this web application was designed to handle a large library of music.

Frg Turbojet, Tyler Vitti

Computer Engineering

Members of the Cal Poly SLO campus club FRG work together with students of several different disciplines to build a functional turbojet engine. Engineering approaches include design, fabrication, testing, and computer sensing, control, and integration. The goal of the project is to produce a running turbojet engine monitored and controlled by embedded hardware and specialized PC software. This project is to be used by later groups for further research and development.

Datalogger Sequence Execution Engine (Dsqee), Edmund Yingxiang Yee

Computer Engineering

The PolySat Research Group accepts projects from several companies that wish to use a CubeSat for some experiment. One of the projects called Intelligent Payload Experiment, or IPEX, needs software to interact with out system avionics. One of these software will be datalogger, which will be augmented from its original datalogging scheme to support sequentially execution of commands/algorithms that our client, Jet Propulsion Laboratory, or JPL, need. My part of the project explains the software design decisions behind datalogger.

Bluemote!, Philip Kaye

Computer Engineering

In today’s society, our mobile phones are an extremely useful device when we are on the go and away from our homes; however, when we return home, our smart phone becomes just a communication tool again. Home automation is inevitable, and it will find its way into every house. The first person to commercialize it to the point where it is as easy to set-up and as affordable as a home router will end up breaking this slow trend. The key to this success is the smart phone; this should end up being the most expensive piece of hardware for …

Detection Of Breathing And Infant Sleep Apnea, Brian Berg

Computer Engineering

Sleep apnea is a condition where people pause while breathing in their sleep; this can be of great concern for infants and premature babies. Current monitoring systems either require physical attachment to a user or may be unreliable. This project is meant to develop a device that can accurately detect breathing through sound and issue appropriate warnings upon its cessation. The device produced is meant to be a standalone device and thus was developed as an embedded systems project on a Xilinx Spartan 6 FPGA.

Streaming Client And Server Model, Austin Alan Diec

Computer Engineering

A few years ago, several Cal Poly undergraduates started the Autonomous Robot Platform (ARP). Interest in a revision of the ARP requires a new layer of communication. This paper describes the design and partial implementation of the communication layer to be used with the revised ARP. The communication layer would allow the autonomous robot platform to connect with a client over the wireless local area network (WLAN) for instructions and commands. It is important to note that currently, the assumed revision of the ARP is nonexistent, so many of the design decisions are based solely on the assumptions of ARP …

Project 308: Augmented Reality Mario Kart, Joseph Abad, David Allender, Joryl Calizo, Ryan Gaspar, Gavin Lee

Computer Engineering

Mario Kart is a popular go-kart racing game developed by Nintendo. The premise of the game is simple: drive a go-kart along a racetrack and reach the finish line before the other players. What makes this game unique, however, is the inclusion of weapons, traps, and other projectiles that a player can use to gain an advantage in the race. We have taken on the challenge of not only recreating this amazing game, but using the art of Augmented Reality to fully immerse the player in the full experience. Rather than play the game on a television screen with a …

Development Of A Cubesat Payload To Model Particle Dampening In Space: Design And Implementation Of Software For Cp7, Daniel Walker

Computer Engineering

The California Polytechnic State University CubeSat student research & development group, PolySat, is currently in a mature development stage of a single unit CubeSat designated CP7. The CP7 mission implements a scientific payload designed to characterize particle dampers in microgravity conditions. When subjected to vibration, the momentum exchanges and frictional forces of the particles create a damping effect that can be optimized to suit a number of applications over a broad frequency and amplitude range. In space based applications, particle dampers would serve as a robust and simple device to eliminate jitter in optical assemblies and other sensitive instrumentation. This …

Utilization Of Automated Gcc Optimization For Dual-Width Instruction Sets On The Arm Architecture, Shane Watson

Computer Engineering

One of the most important considerations in embedded systems is code size. This consideration is obviously imposed by external factors such as cost and physical space, but what it boils down to is that we want our devices to be as powerful as they can within a (typically limited) specific form factor. This limits the amount of space we have for memory and as such we should always be considering the code size of our application and making sure it’s as efficient as possible. We also then need to consider other factors such as performance and power consumption. This is …

Ultrasonic Shark-Tag Locator System For Iver2 Auv, Nathaniel Garcia

Computer Engineering

The purpose of this project is to develop a system for tracking an ultrasonic underwater transmitter that can be integrated into an IVER2 AUV to allow it to follow and monitor tagged sharks in the ocean for scientific research.

The system consists of a four main components including a shark-tag, two hydrophones, a filter/amplifier & threshold detector circuit, and a microcontroller.

This project, while not completing field testing and integration with the IVER2, is a proof of concept of a system that utilizes passive sonar to determine a bearing from the system to a shark-tag transmitter. Additionally, it devised several …

Max Flow Spill Code Placement Algorithm Implemented In Gcc 4.4.3, Stephen Robert Beard

Computer Engineering

The placement of spill code plays an important role in the register allocator of an optimizing compiler. Many computer architectures possess a register linkage convention that dictates which registers are preserved across function calls and which are not. This project addresses the problem of optimizing spill code that is associated with register linkage conventions.

This algorithm was created by Dr. Chris Lupo and is described in the paper Beyond Register Allocation: a Novel Algorithm for Spill-Code Placement. The algorithm was implemented for GCC 2.5.7 for a PA-RISC architecture [4]. The work in this project will involve porting the existing code …

Rfid Asset Tracking And Digital Check-Out System, Jeffrey (Jeff) Migliore

Computer Engineering

An asset tracking and digital check-out system was developed using Radio Frequency Identification (RFID) and a Single Board Computer (SBC). A RFID reader was used as a check point to process transactions. The RFID reader was attached to the SBC via USB. The SBC is integrated into a network via Ethernet and hosts a web graphical user interface (GUI) frontend for users to view transactions and query availability of assets. A MYSQL database was used for the backend storage of data.

Specifically, this system was designed to track tool assets. Many modern companies have employees sharing limited resources. The common …

Pretty Lights, Nicholas (Nick) Delmas, Matthew (Matt) Maniaci

Computer Engineering

Digital media players often include a visualization component that allows a user to watch a visualization synchronized to their music or videos. This project uses the visualization plugin API of an existing media playback program (WinAmp) but it displays its visuals using physical LED lights. Instead of outputting visuals to the computer screen, data is sent over USB to a micro controller that runs the LED lights. This project aims to give users a more visceral visual experience than traditional visualizations on the computer screen.