Computer Engineering Commons^™

Research On Simulation Of Emergency Evacuation Guidance Under Biochemical Terror Attacks, Sui Jie, Shengjie Long

Journal of System Simulation

Abstract: Biochemical terror attacks can cause numerous casualties, especially when it happens in public places such as subway station, which is densely populated, sealed, and complex in topography. And evacuating guidance plays an important role in reducing casualties. A guidance scheme was established based on both evacuating empirical formula and passengers escaping rules, according to evacuation problems in subway station. Meanwhile, the different features of passengers and their behaviors under attack were analyzed, as well as their impacts on evacuation. By simulating various evacuation situations based on social force simulation model, the importance of environmental features and passengers features in …

System Modeling And Simulation For Cylinder Controlled By Servo Valve Of Hydraulic Looper In Hot Strip Mills, Guilin Tao, Weigang Li

Journal of System Simulation

Abstract: Starting from the flow characteristics of cylinder controlled by servo valve of hydraulic looper in hot strip mills, a new mathematic model for hydraulic cylinder controlled by servo valve was established by analyzing and deducing the flow characteristics of two chambers of hydraulic cylinder. The model is different from the traditional equivalent model of “load-pressure flux”, and it is adaptable to many structural forms such as symmetric cylinder, asymmetric cylinder and piston cylinder. The simplified equivalent model was deduced by the simplified method of automatic control principles. The simulation experiments were carried out on a practical cylinder controlled …

Motion Analysis And Simulation Of Lower Limb Based On Adams, Zhang Yan, Haomiao Zhang, Bokai Xuan, Yongchang Zhang

Journal of System Simulation

Abstract: On the basis of the lower limb movement kinematics and dynamics analysis, a lower limb motion simulation system was established by the virtual prototyping technology. The human model was designed by ADAMS and the angle and moment of force in each joint were obtained through kinematics and dynamics analysis. The established model of lower limb was validated by the simulation of human lower limb movement under different road conditions. The experiment result shows that the walking process of each road conditions are stable and normal. It indicates that the virtual prototype model can accurately describe the process of human …

Simulation Of Ultrasonic Shear Wave Imaging In Detection Of Liver Rupture, Yu Jiao, Erwei Nie, Yanying Zhu

Journal of System Simulation

Abstract: Ultrasonic shear wave imaging technology provides the elastic information of the soft tissue by examining the propagation of the shear waves in the tissue. The possibility of using ultrasonic shear wave imaging technology combined with a directional filter for the detection of liver rupture was explored. The COMSOL Multiphysics software was used to simulate the generation and propagation of the shear waves in the liver medium with a rupture, a directional filter-based algorithm was applied to separate the incident wave and reflected wave, and an edge detection algorithm was applied to detect and delineate the liver rupture. Preliminary results …

Simulation-Based Optimization For Site Selection Of Agv Charging Mode, Danlan Xie, Haihong Yu, Chen Jing, Zhipeng Gao, Zhanghao Zhang

Journal of System Simulation

Abstract: With the development of intelligent manufacturing, automation of production line is improving. AGV (automated guided vehicle) as a necessary device in the automation system, it is important to design its charging system. Aiming at the problem of the site selection of online charging, the software FlexSim was used to build simulation model, based on the operation requirements of an actual assembly shop, in an actual planning process. Through a large number of simulation experiments, the maximum stay location of AGV in the different lines was obtained under the influence of random factors. By comparing the idle and blocked …

Simulation Research On Twc Dynamics Model During Cold Starting For Hybrid Electric Vehicle, Deng Tao, Xiaojing Li, Chunsong Lin, Renzhi Lu

Journal of System Simulation

Abstract: To reduce the emissions for gasoline engine during cold starting, the influences of crevice effect, wet wall effect because of the low cylinder temperature, adsorption/desorption of cylinder oil film and incomplete combustion on the HC emissions were analyzed. Moreover, the influences of the storage and release of oxygen on effective oxygen concentration were considered. The three-way catalytic (TWC) model was established with the lumped parameter method and analyzed under NEDC cycle. The temperature of exhaust gas getting in and out of the catalytic converter, the quantity and the efficiency curve of emissions were obtained. Furthermore, the conversion efficiency …

Simulation Research On Electromagnetic Radiation Noise Of Pantograph Arc, Fengyi Guo, Xili Wang, Xingbang Hu, Zhiyong Wang, Yanli Liu

Journal of System Simulation

Abstract: Pantograph-catenary system electromagnetic noise radiation not only endangers traffic safety, but also adversely affects the health of nearby residents and communications along the railway. By studying the radiation characteristics of the electromagnetic noise of the pantograph-catenary, provide a theoretical basis for suppression its radiation intensity. A Matlab simulation model of the pantograph offline arc was established, the simulation result shows out the discharge characteristics and the spectrum bounds of the arc. Then using the finite element analysis software to do a simulation analysis about pantograph typical frequency of the arc, the far-field and near-field characteristics based on the pantograph …

Reconfigurable Rtgpu's Architecture And Simulation, Xiaopeng Cao, Jungang Han

Journal of System Simulation

Abstract: Although GPU has developed rapidly, the core still uses rasterization and it is a hard problem for the complex scene. The ray tracing can simulate the geometrical optics and get the better effect, but it needs the amounts of computing power. Thus, the characteristic of the ray tracing was studied and the new pipeline was designed. A dynamic reconfigurable hardware architecture (RTGPU) was put forward mapping the pipeline to it. A simulation platform was designed. According to results of experiments, more than 11x on RTGPU could be gained achieving the better performance than GPU.

Optimization Design And Simulation Of Washout Algorithm For Flight Simulator, Wang Hui, Daoyang Zhu, Xiaojing Fu

Journal of System Simulation

Abstract: The key of the fidelity of flight simulators lies in the merits of the washout algorithm; the classical washout algorithm has been widely applied owing to its convenient parameter adjustment as well as rapid feedback and execution speed. However, the classical washout algorithm still exists some certain defects in its structure design, which will cause exaggerated phase retardation error and false cues thus resulting in the deterioration in dynamic fidelity of flight simulators. According to vestibular perception system, the structure redesign of the classical washout algorithm was carried out, using the compensation theory to reduce its phase retardation and …

Study On Pulverizing System Simulation Model Of 300mw Lignite Oxygen-Enriched Combustion Boiler, Jianqiang Gao, Shaodong Sun

Journal of System Simulation

Abstract: The simulation model of the pulverizing system of a 300 MW lignite oxygen-enriched combustion boiler was developed. And the dynamic and static simulation experiments were completed, the experiments included lignite surface moisture content variation, disturbance of feeder norm speed, flue gas inlet temperature and flow rate etc. The results show that, the model is able to correctly simulate the dynamic process of the system. Moisture reduction has a larger impact on the pulverizing system operating parameters. The mill outlet temperature gets a significant rise, especially when it is less than 30%. When the feeder norm speed or flow rate …

Research Of Vibration Control On Nonlinear Rotor System With Fuzzy-Pid, Liu Jun, Zhenwang Liu, Jianen Chen, Liangfu Wang

Journal of System Simulation

Abstract: In order to overcome the problems which are the model of the nonlinear restoring force and the nonlinear vibration control, the vibration control of the nonlinear rotor system and the processing the nonlinear restoring force were accomplished based on the electromagnetic actuator using the FUZZY-PID controller with the fitness function of the variable width and variable geometric shapes. Using the Jeffcott rotor model with the nonlinearities of the forces of the bearing and the electromagnetic actuator, the simulations of the vibration control on the rotor system were performed. Through comparing with the control methods of the traditional PID and …

Improved Design Scheme And Simulation Analysis Of Non-Valve Controlled Hydraulic Impact System, Liu Zhong, Zou Yu, Zhang Kai, Zhao Fei, Junjun Liu

Journal of System Simulation

Abstract: Due to valve port commutation of traditional hydraulic impact system caused valve leakage. For the above shortcomings, an improved structure principle of the new type of non-valve controlled hydraulic impact system was proposed establishing dynamic equations of impact system andconducting simulation analysis based on AMESim. Due to the simulation results which was inconsistent with design goal, two improvement schemes were proposed adding throttle device and controlling inlet and outlet circuit. The simulation results suggest that the working performance of impact system has been improved by adding throttle device, and its efficiency has been increased from 11.8% to 18.3% …

Modeling And Simulation Of Power Communication Networking Based On Quality Of Service, Xueyi Zhang, Juhui Gu, Meiqin Zhou

Journal of System Simulation

Abstract: For the complex network topology and channel time-varying characteristics of power line carrier communication in low voltage distribution grid, there is a phenomenon of slow convergence and stagnation when solving the routing problem with traditional ant colony algorithm. The algorithm used is easy to fall into premature and local optimization. An automatic networking algorithm based on transmission delay and the load factor of the evaluation factors was proposed and a genetic algorithm was joined at a later stage. The optimal solution was obtained by using the improved crossover operators, and the convergence of optimal algorithm solution was accelerated by …

Simulation And Analysis Of Ultra High Frequency Induction Heating Circuit Based On Current Source, Mangyuan Ma, Xinchun Shi, Wang Hui, Jianhui Meng

Journal of System Simulation

Abstract: The operating frequency range, operating mode and output power are determined by the circuit. A suitable circuit is very important for induction heating power supply. On the basis of Class-E and Boost Chopper circuit, a new current source was analyzed with parallel resonant load circuit by energy conservation law and Fourier decomposition, which derived mathematical relation among the parameters and provided application theory. This circuit was studied by using Matlab/Simulink with variable parameters, which obtained the operating waves with different parameters and values. Comparing the operating waves with the theoretical analysis, the simulation results are completely consistent with the …

Evaluating Driving Performance Of A Novel Behavior Planning Model On Connected Autonomous Vehicles, Keyur Shah

Honors Scholar Theses

Many current algorithms and approaches in autonomous driving attempt to solve the "trajectory generation" or "trajectory following” problems: given a target behavior (e.g. stay in the current lane at the speed limit or change lane), what trajectory should the vehicle follow, and what inputs should the driving agent apply to the throttle and brake to achieve this trajectory? In this work, we instead focus on the “behavior planning” problem—specifically, should an autonomous vehicle change lane or keep lane given the current state of the system?

In addition, current theory mainly focuses on single-vehicle systems, where vehicles do not communicate with …

Force/Position Hybrid Control Method For Surface Parts Polishing Robot, Yufeng Ding, Xinpu Min

Journal of System Simulation

Abstract: A force/position hybrid control method for polishing the complex surface with an industrial robot is put forward. The method can achieve the stable force control and precise position control to ensure the consistency of the material removal rate at different normal vectors. After the trajectory of the normal vector is planned in CAD software, the force signal feedback from the sensor and the PI controller in the normal vector direction are combined,and the robot end tool corrects the motion trajectory in the vector direction of the surface to indirectly control the contact force between the tool and the surface. …

A Quantile-Based Approach For Transmission Expansion Planning, Jairo Cervantes, F. Fred Choobineh

Department of Electrical and Computer Engineering: Faculty Publications

Transmission expansion planning is an integral part of power system planning and consists of generating and selecting transmission proposals for maintaining sufficient transmission capacity to satisfy the electric load. Specifically, the desire to increase the use of renewable energy has exposed the limitations of transmission networks and has elevated the importance of transmission expansion planning. However, considering the random nature of renewable sources in conjunction with the power outages makes the planning process very challenging. We present a new procedure for selecting the best transmission enhancement proposal from a set of finite proposals under uncertainty. The selection is based on …

One Design Mode Of Highly Configurable Modular Simulation System, Chunsheng Hu, Chengdong Xu, Penfei Zhang

Journal of System Simulation

Abstract: The computer simulation technology is an essential verification way to the design, construction and application optimization of the modern complex system. Following the continuous growing complexity of the system, the higher requirement on the configurability of the simulation system is needed to face the rapidly change. Based on the analysis on the configurability and some coupling factors with the adverse effect, a design mode of highly configurable and open and easy to expend modular simulation system is proposed. The results show that, despite the cost of some real-time performance, the design mode can realize the high configurability of the …

Emergency Evacuation Simulation For Dense Passenger Flow In A Rail Transit Transfer Station, Xu Hui, Tian Cheng, Wang Yong

Journal of System Simulation

Abstract: The rail transit is one of the important modes of the public transportation, and its safety operation is crucial. Based on the passenger volume and structure features that have been obtained through the field investigation in Chongqing Lianglukou railway station in China, a multi-level rail transit transfer station simulation model is built to analyze the evacuation process of pedestrians in the consideration of explosion and other emergencies by the software AnyLogic. The evacuation routes and evacuation time of passengers during emergency evacuation in a rail transit transfer station are studied. The research aims at verifying the emergency evacuation capacity …

Simulation Analysis On Flexible Track Drilling Machine Based On Adams, Yanchao Zhang, Ting Wang, Danlong Song

Journal of System Simulation

Abstract: The three-dimensional model of the flexible track drilling machine is designed by the virtual prototyping technology. The model is imported into ADAMS (Automatic Dynamic Analysis of Mechanical Systems) software to carry out the kinematics and dynamic simulation analysis of its virtual prototype, and the rationality and feasibility of the system design are evaluated. Through the comparative analysis, the reasonable driving velocity and acceleration parameters of the hole making system are given. According to the analysis of the dynamic characteristics of the systems, the asymmetric driving problems in the system are found and the corresponding improvement scheme is put forward. …

Novel Approaches For Evaluating The Performance Of Antenna Arrays For Massive Mimo Systems, Abbas Al-Wahhamy

Theses and Dissertations

Massive Multiple-Input Multiple-Output (MIMO) is a key promising technology for 5G networks that allows a significant increase in spectral and energy efficiency without increasing the spectrum and/or the number of cell sites. However, the computational time and resources required to rigorously analyze the capacity offered by a base station equipped with a large number of antenna elements increases with the increase of the number of antenna elements. A novel approach is presented for modeling large microstrip antenna arrays in base stations of massive MIMO systems. The approach subdivides an M×N array into columns, rows, rectangular, or square subarrays, each consisting …

Design Of Air Defense Missile Weapon System Simulation Platform Based On Xsim Platform, Kaizhi Ruan, Qingqing Yuan, Wenhua Zhai, Zhiqiang Zhang

Journal of System Simulation

Abstract: Taking the system simulation technology which applied to the scheme argumentation, optimization design, flight test forecast, battle effectiveness evaluation of air defense missile weapon system as background, the design method of air defense missile weapon system simulation platform based on Xsim platform was put forward. The total configuration design, model design and simulation process design of the platform were discussed. An simulation platform of an air defense missile weapon system was accomplished. The result proves the platform can simulate the battle process of air defense missile weapon system, support the simulation work of air defense weapon at different …

Geoaware - A Simulation-Based Framework For Synthetic Trajectory Generation From Mobility Patterns, Jameson D. Morgan

Browse all Theses and Dissertations

Recent advances in location acquisition services have resulted in vast amounts of trajectory data; providing valuable insight into human mobility. The field of trajectory data mining has exploded as a result, with literature detailing algorithms for (pre)processing, map matching, pattern mining, and the like. Unfortunately, obtaining trajectory data for the design and evaluation of such algorithms is problematic due to privacy, ethical, dataset size, researcher access, and sampling frequency concerns. Synthetic trajectories provide a solution to such a problem as they are cheap to produce and are derived from a fully controllable generation procedure. Citing deficiencies in modern synthetic trajectory …

An Efficient Reliability Simulation Tool For Lifetime-Aware Analog Circuit Synthesis, Engi̇n Afacan

Turkish Journal of Electrical Engineering and Computer Sciences

Time-dependent degradation (aging) has become more severe in modern CMOS technologies. Therefore, it is highly critical to capture the variation effects and design reliable circuits against aging. Simulation of time-dependent variations is quite complicated since the degradation is a function of time, where the step count of simulation directly affects the accuracy and the efficiency of the analysis. Commercial simulator tools use a constant step count during reliability simulations, in which choosing a large step count degrades the efficiency whereas keeping it small may result in accuracy problems. To overcome this bottleneck, a couple of different approaches have been proposed …

Research On Simulation Platform For Equipment System Analysis, Yuping Li, Shaojie Mao, Zhenqi Ju, Zhou Fang, Guoqiang Yan

Journal of System Simulation

Abstract: With the development of equipment construction from platform-centric to network-centric, simulation analysis of equipment system is an important means and tool to support the transformation and development of equipment construction under the condition of multi-task joint operation. Starting from the requirement of system simulation analysis, a cloud-based equipment system simulation architecture is proposed to realize flexible and configurable simulation environment according to task requirements; and a high-performance simulation framework is conducted, which provides strong support for different application modes, such as parallel hyper-real-time and distributed simulation deduction. The unified description, organization and management method of model and data resources …

Research On Simulation Optimization Of Disk-Based Storage Operation Mode In Warehouse, Danlan Xie, Liu Meng, Haihong Yu, Chen Jing, Yubo Zhou, Kazi Mohiuddin

Journal of System Simulation

Abstract: As the efficiency of operation affects the overall competitiveness of the port, it is very necessary to design the storage operation mode reasonably. A disk-based storage operation mode is proposed. And the simulation model is established by using the logistics simulation software FlexSim based on the operational requirements of the warehouse. Through a large number of simulation experiments, comparing the primary storage mode with the disk-based storage mode, the results of the increase in total idle rate and the more balanced distribution of each hour utilization ratio of the forklifts are obtained. The result verifies the feasibility and effectiveness …

Control Optimization Of Hybrid System With Hybrid Power Based On Dp Algorithm, Deng Tao, Haoyuan Yu, Bin Xu

Journal of System Simulation

Abstract: Aiming at the complexity and diversity of energy management for HEV(hybrid electric vehicle) with hybrid power, taking the State of Charge of power battery and ultracapacitor as state variable, the torque distribution ratio between engine and motor, and the power distribution ratio between power battery and ultracapacitor as control variables, the fuel economy and emission performance as objective function, the Dynamic Programming (DP) control strategy for HEV with hybrid power is proposed. The working rules of the engine, motor, battery and ultracapacitor, are extracted from the results, and the rules of engine and motor and the fuzzy control …

Pshev Cold Start Emission Simulation Based On Electric Heated Catalyst Pre-Heating, Deng Tao, Haoyuan Yu, Zhifei Li, Haixin Tan

Journal of System Simulation

Abstract: In order to reduce the emissions of the plug-in series hybrid electric vehicle (PSHEV) during the cold start phase, a vehicle model on PSHEV is established and a dynamic model of electrically heated catalyst system (EHCS) based on optimization and control strategy of engine start-stop is built. The PSHEV energy management control strategy based on EHCS preheating is proposed. The influence of different pre-heating power on EHCS temperature is simulated. By comparing SOC value of the control strategy with the original control strategy; and comparative analysis of cold start emissions of three elements catalyst under three strategies of pre-heating, …

Some Problems And Countermeasures In Simulation Credibility Evaluation, Jiao Peng, Zhang Qi, Xiangyu Wei, Yabing Zha

Journal of System Simulation

Abstract: With the increasing application of simulation technology in various fields, users have put forward higher requirements for the credibility of the simulation system. This paper focuses on some key issues of the credibility evaluation of the simulation system, such as the unclear expected application, the incomplete evaluation, the unclear evaluation criteria, and the open loop of evaluation conclusions. From the perspectives of comprehensive implementation of credibility assessment, strengthening the design of acceptability standards, and focusing on the evaluation of closed-loop implementation, how to solve the real problem has been studied and discussed. The research results of this paper …

Research On Hwil Simulation Of Rf/Ir Dual-Mode Sensors Based On Compact Antenna, Gao Yang, Ma Jing, Huiyang Qu, Qun Wei, Jindong Fei

Journal of System Simulation

Abstract: The advent of RF/IR dual-mode sensor technology in the more and more completed detecting environment has led to the requirement of simulation tools that are necessary to test dual-mode sensor. The hardware-in-the-loop simulation experiment and test of the radio frequency/infrared composite sensor are carried out.A RF/IR dual-mode simulation method based on the Compact antenna test ranges is proposed here. This system consists of IR simulator, RF simulator, beam-combiner etc. The testing result shows that RF/IR dual-mode simulation system has abilities of IR transmission and RF reflection, and could be used in RF/IR dual-mode sensor simulation.