Computer Engineering Commons^™

Multi-Seats Collaborative Task Planning Based On Improved Particle Swarm Optimization, Cai Rui, Wang Wei, Jue Qu, Hu Bo

Journal of System Simulation

Abstract: Aiming at the allocation conflict between task and operator of multi-seats collaborative task planning in command and control cabin, a multi-seats collaborative task planning method based on improved particle swarm optimization is proposed. This method describes and analyzes the multi-seats collaborative task and establishes a solution space model based on task sequence. In solving the model, the particle swarm optimization (PSO) was improved by using multi-dimensional asynchronous processing and modifying inertia weight parameters so that the efficiency and local searching ability of the PSO were improved. The example analysis shows that the model and the algorithm can effectively reduce …

From Digital Twin To Digital Engineering Modeling And Simulation Entering A New Era, Zhang Bing, Li Xin, Xinxin Wan

Journal of System Simulation

Abstract: In the digital new era, all kinds of things and even the whole world can be digitized as a model. Simulation activities are conducted for various purposes, and the results can provide intelligent support for various decision-making. Digital twin is an important form of modeling and simulation application in the digital new era; it has been widely used in intelligent manufacturing, factories, buildings, smart cities and many other fields, showing a strong vitality; and its next step in the development direction is a comprehensive digital engineering. This paper reviews the history of the development of digital twin technology, analyzes …

Model And Simulation Of Taxi Market With E-Hailing Application, Tian Qiong, Jingtao Zhang

Journal of System Simulation

Abstract: The emergence and popularity of e-hailing applications offer a new way for taxi drivers and passengers to communicate on line, which not only changes the behaviors of passengers and reduce the idle rate of taxi, but also brings the cost of information for taxis and passengers. Referring to the classic circular city model and combining with the characteristics of new way to take taxis and the cost of information, a model of taxi market with e-hailing application is formulated, which describes the behavior of passengers waiting for idle taxis and taxis cruising for un-served passengers. We provided an algorithm …

Signal Control Strategy And Simulation For Vehicles Alternatively Passing Construction Area Of Two-Lane Road, Haipeng Shao, Binbin Zheng, Linxu Long

Journal of System Simulation

Abstract: The construction area of the two-lane roads can form the road bottlenecks easily, leading to the capacity of the road reducing. Aiming to keep the vehicle passing the construction area safely and efficiently, we added the strategy of signal control in the construction area. We built a suitable signal control model for the construction area of the two-lane road. By using the simulation software of Vissim, we established the related simulation models. By using the control variable method to change the simulation parameters and by changing the arrival traffic and speed, we got the influences and rules to the …

Semantic Value-Driven 3d Upright Posture Figure Model Transformation, Yangfu Ren, Yuanyuan Pu, Xu Dan, Wenhua Qian

Journal of System Simulation

Abstract: In medical equipment, clothing design, film production and computer games, 3D human body model is an indispensable element, but directly obtaining it by means of scanning the human body model does not directly apply in many environments, so we need to moderate deformation model according to the environment. The operation difficulty of the model of deformation is considered, and the deformation effect is achieved. For studying the 3D human body model deformation problem, the deformation of semantic driven model is introduced. Semantic values of height, leg length and shoulder height were obtained by measuring the position of joint points …

3d Mesh Editing Method For Virtual Double Eyelid Surgery, Guan Tong, Juntao Ye, Guanghui Ma, Xiaopeng Zhang

Journal of System Simulation

Abstract: A virtual cosmetic surgery system involves lots of human-computer interactions,and the achieved effects rely on the skills of the operator. Virtual double-fold eyelid surgery is a function that is either missing or implemented with less accuracy in commercial software. To solve these problems, we propose an algorithm that can automatically generate virtual double-fold eyelid path taking advantage of geodesic line. In terms of algorithms, this method adopts a self-adaptive subdivision strategy to avoid losing shapes of the deformation outcomes. Results of experiments show stability, high efficiency and usability of our method.

System Analysis Method Based On Simulation Big Data, Guangya Si, Wang Fei, Liu Yang

Journal of System Simulation

Abstract: Wargaming and exploratory simulation with large-scale simulation systems produce massive simulation data. These data contain many complexity patterns of war, and are significant samples for studying the mechanism of war. Based on the definition of simulation big data, an analysis framework based on simulation big data is proposed, which is divided into three levels: simulation environment and data planning, big data acquisition and storage, and analysis and mining. The simulation data planning and analysis and mining are briefly introduced.

Thermodynamic Simulation Of Carbonitride Precipitation In Micro-Alloyed Steel, Weigang Li, Yang Wei, Liu Chao, Baokang Yan

Journal of System Simulation

Abstract: A mathematical model for calculating the precipitation of carbonitride in the process of hot rolling of composite micro-alloyed steel is established, and the interaction between the carbonitride and AlN is considered. In view of the difficulties of the thermodynamic model that the variables are multiple, the equations are nonlinear and the boundary conditions are determined difficultly, the Newton-Raphson numerical algorithm characterized by coupled problem is adopted. The precipitation starting temperature and precipitation sequence of carbonitride and AlN at different compositions are determined. The equilibrium composition of elements in austenite, the composition and mass fraction of carbonitride precipitates, as well …

Application Of Constraint Force Equation Methodology In Aircraft Stage Separation Dynamics Simulation, Yongji Wang, Bangbang Li, Liu Lei

Journal of System Simulation

Abstract: The separation process of two-stage aircraft can be divided into three periods: lock-up period, constraint period and detachment period. The guide pins have constraint on two stages, which permit only translation in X-axis direction. To avoid the complex force analysis, the guide pins can be regarded as a joint of one degree of freedom. By adding the constraint and freedom equations to traditional separation dynamics equations, a dynamics model based on constraint force equation (CFE) methodology was built. The constraint force and moment can be obtained by solving constraint force equations. The constraint force equation (CFE) methodology was …

Facial Expression Synthesis Using Mals-Based Bilinear Factorization Model, Jiaci Guo, Shuling Dai

Journal of System Simulation

Abstract: Study on the facial expression synthesis is a constructive and creative subject in the field of virtual reality technology. The bilinear model is used for facial expression synthesis by separating the identity factor and the expression factor. The translation procedure in the bilinear model always requires a repetitive computation of matrix inverse operations to reach the identity factor and the expression factor. This computation may be instable when the observation data has the correlation or noisy information. In order to increase the stability of the bilinear model for expression synthesis, the modified iterative least square (MALS) regression is introduced …

Encoder Fault Detection And Fault Tolerant Control Of 3d Stage Wire System Based On Fdre, Li Wei, Zhenfu Ge, Fuyuan Shen, Jianxing Gong

Journal of System Simulation

Abstract: Aimed at the problem of encoder fault of 3D stage wire system, combined with LADRC, two kinds of fault tolerant control strategiesare presented based on fault diagnosis reliability evaluation (FDRE) to prevent the spread of fault effects in the system and causing accidents. Based on this, the soft and hard smooth transition soft redundant switching mechanism is designed. The simulation results show that the control strategy can ensure encoder fault detection in a timely and reliable manner, and effectively improve the safety and reliability of 3D stage wire system.

Modeling And Simulation Of Missile Trajectory Based On Practical Sampling, Wu Shuai, Xiaohua Zhou, Lili Wang, Xingzhong Yao

Journal of System Simulation

Abstract: Aiming at the problem of lacking the proper simulation method for missile trajectory in combat simulation training, this paper analyzes the limitations of the 6D and 3D simulation models, proposes a method of trajectory simulation with missile kinematics model and history measured data, and taking an air-to-surface ballistic missile with midcourse-terminal guidance as an example, describes the model construction process in detail. Through the verification, validation and simulation experiments, it shows that this method can simulate various types of missile trajectory with high confidence on both sides of “red and blue”, which has an important reference meaning for missile …

Multi-Objective Operation Scheduling Optimization Of Shipborne-Equipment Based On Genetic Algorithm, Jinsong Bao, Zhiqiang Li, Yaqin Zhou

Journal of System Simulation

Abstract: Multi-objective operation scheduling of shipborne equipment is a complex combinational optimization problem under multi-task system. Existing research focuses mainly on single-objective optimization while several other objectives need to be considered during real operation such as path, duration, resource, etc. Considering the operation scheduling before exporting of an amphibious landing ship as the research object, both scheduling duration and resource requirement under the precedence constraint are optimized. The mathematical model of this multi-objective operation scheduling is established and solved using genetic algorithm. A fitness function which can be self-adaptively adjusted is designed; an adapting encoding strategy, a crossover operator, and …

Serious Game Human-Computer Interaction Design For Rehabilitation Training, Jiajia Wu, Liu Zhen, Huihuang Xu, Tingting Liu, Wang Jin, Yanjie Chai

Journal of System Simulation

Abstract: Constructing a human-computer interaction environment which can effectively enhance users’ experiences of serious game. By integrating the rehabilitation training process into an interactive game story, users can do their mental and body rehabilitation training in the community. The prototype of the game is realized by the game engine. Experimental results showed that using mouse to roam in the system is easier than other interaction method and the somatosensory interaction is convenient for exercising the limb. By designing emoji for virtual characters, it is easy for users to learn other people's emotions and the comfortable distances for others. The results …

Sliding Mode Auto Disturbance Rejection Control Of Pmsm Without Speed Sensor, Limin Hou, Yifu Ren, Hengfei Liu, Lin Dong

Journal of System Simulation

Abstract: Aiming at the problem of parameter setting and response speed of the traditional ADRC method, a kind of novel sliding mode auto disturbance rejection speed controller is designed, and a sliding mode adaptive speed control system of PMSM without speed sensor is established. The nonlinear disturbance observer (NDOB) is used to replace the extended state observer (ESO) integrated disturbance estimation. The sliding mode control is introduced in the nonlinear state error feedback control; the sliding mode ADRC current controller and speed controller are designed; and the stability is proved by using Lyapunov theory. The rotor position and speed of …

Trajectory Planning Method Of Overhead Crane, Xuejuan Shao, Li Yao, Jinggang Zhang, Xueliang Zhang

Journal of System Simulation

Abstract: To make the trolley of bridge crane move stably with smooth acceleration, a polynomial acceleration trajectory is proposed based on the constraint conditions of the crane and the friction between the trolley and the rail. An anti-swing plan is designed employing the dynamic coupling relationship between the motion of the trolley and the load swing. Results indicate that when the length of the rope is changed, the swing angle of the trolley is still within the limits. The stability of the system is proved by constructing Lyapunov energy equations, and the Barbalat lemma confirms that the planned reference trajectory …

A New Memristor Chaotic System And Its Application In Image Encryption, Shuanghui Qu, Zhihong Yang, Xuwei Rong, Shuhua Wu

Journal of System Simulation

Abstract: A new memristor chaotic system is designed by the method of bringing an ion migration memristor into the Chen system equation. The basic dynamic characteristics of the memristive system are investigated via bifurcation, Lyapunov exponent et al, which proves the validity of the new system. The new memristor system is applied in the image encryption to improve the security of the encryption key. A dual encryption algorithm is used, which makes every pixel value of plaintext influence all pixel values of ciphertext. Although there is no direct link between plaintext and ciphertext, the sensibility of ciphertext varying with …

Influence Of Composite Materials Surface Metal Mesh On Helicopter Lightning Stroke Effects, Junling Huang, Jiayu Xie

Journal of System Simulation

Abstract: The metal wire mesh is usually adopted to prevent the lightning stroke on composite materials. The effects of different materials and different thickness of metal mesh on helicopter lightning electromagnetic effect are compared. According to the method recommended by SAE-ARP5416, a numerical simulation software is used for carrying out the high current injection simulation. The results show that the surface mount metal mesh can effectively reduce the harm of lightning electromagnetic coupling effect; the difference between aluminum and copper on anti-lightning stroke effect is not obvious; when the thickness of aluminum grid is less than 0.15 mm, the …

Thai Language Names, Place Names And Organization Names Entity Recognition, Hongbin Wang, Hongkui Gao, Shen Qiang, Yantuan Xian

Journal of System Simulation

Abstract: Named entity recognition in Thai language is aimed to identify the names of a person, a locality,an organization or an institution,and so on. Due to the complexity of Thai word formation method and grammar rules, to solve this problem, the idea of the approach proposed is to treat the task of named entity recognition in Thai language as labeling the sign of a series of words in Thai sentence. Given the characteristics of Thai language itself, certain features in the context of the samples in the Thai entity recognition corpus are extracted to train the hidden Markov model and …

Rfid Item-Level Tagging In A Grocery Store Environment, Brian Truman

LSU Master's Theses

The purpose of this research was to investigate how effective item-level Radio Frequency Identification (RFID) tagging would be using current RFID technology as a replacement for barcodes in a supermarket/grocery store environment.

To accomplish this, an experiment was be performed that utilized commercially available RFID technology. Passive Ultra High Frequency (UHF) RFID Tags were affixed to various grocery store items of different material categories (Food, Metal, Plastic, Liquid, and Glass), and placed in a metal shopping cart. Eight (8) antenna arrangements were created, comprised of different combinations of four (4) antennas in different locations around the cart.

The experiment was …

Effective Fuzzing Framework For The Sleuthkit Tools, Shravya Paruchuri

LSU Master's Theses

The fields of digital forensics and incident response have seen significant growth over the last decade due to the increasing threats faced by organizations and the continued reliance on digital platforms and devices by criminals. In the past, digital investigations were performed manually by expert investigators, but this approach has become no longer viable given the amount of data that must be processed compared to the relatively small number of trained investigators. These resource constraints have led to the development and reliance on automated processing and analysis systems for digital evidence. In this paper, we present our effort to develop …

High-Dimensional Clustering Method Based On Variant Bat Algorithm, Kou Guang, Guangming Tang, Jiajing He, Hengwei Zhang

Journal of System Simulation

Abstract: With the advent of the era of big data, the information resource is growing rapidly, and the data are becoming high-dimensional. Traditional clustering methods have a good effect for low-dimensional data, but no longer apply to high-dimensional data. On the basis of existing high-dimensional clustering algorithm, a high-dimensional clustering algorithm based on intelligent optimization SSC-BA is proposed. A novel objective function is designed, which integrates the fuzzy weighting within-cluster compactness and the between-cluster separation. A variant bat algorithm is introduced to calculate the weight matrix, giving the new learning rules. Simulation experiments are made for the proposed algorithm, and …

Algorithms For Designing Processes Of Electronic Interactive Services, Ozod Radjabov

Bulletin of TUIT: Management and Communication Technologies

Today, the integration of electronic interactive services is based on the correct placement of algorithms to ensure solidarity in information systems, the design stages of information systems based on interactive services and the corresponding events, the implementation of functions in a strict sequence.

Security Of The Internet Of Things: Vulnerabilities, Attacks And Countermeasures, Ismail Butun, Houbing Song, Patrik Osterberg

Publications

Wireless Sensor Networks (WSNs) constitute one of the most promising third-millennium technologies and have wide range of applications in our surrounding environment. The reason behind the vast adoption of WSNs in various applications is that they have tremendously appealing features, e.g., low production cost, low installation cost, unattended network operation, autonomous and longtime operation. WSNs have started to merge with the Internet of Things (IoT) through the introduction of Internet access capability in sensor nodes and sensing ability in Internet-connected devices. Thereby, the IoT is providing access to huge amount of data, collected by the WSNs, over the Internet. Hence, …

Water Pipeline Leakage Detection Based On Machine Learning And Wireless Sensor Networks, Yang Liu, Xuehui Ma, Yong Tie, Yinghui Zhang, Jing Gao

Department of Electrical and Computer Engineering: Faculty Publications

The detection of water pipeline leakage is important to ensure that water supply networks can operate safely and conserve water resources. To address the lack of intelligent and the low efficiency of conventional leakage detection methods, this paper designs a leakage detection method based on machine learning and wireless sensor networks (WSNs). The system employs wireless sensors installed on pipelines to collect data and utilizes the 4G network to perform remote data transmission. A leakage triggered networking method is proposed to reduce the wireless sensor network’s energy consumption and prolong the system life cycle effectively. To enhance the precision and …

Machine Current Sensor Fdi Strategy In Pmsms, Haibo Li, Yi Qian, Sohrab Asgarpoor, Hamid Sharif

Department of Electrical and Computer Engineering: Faculty Publications

This work proposes a machine current sensor fault detection and isolation (FDI) strategy in permanent magnet synchronous machines (PMSMs) resilient to multiple faults. The fault detection is performed by comparing the measured and estimated DC link currents. The fault isolation is achieved according to machine phase signal estimation and the corresponding residual examination. Single sensor fault, multiple sensor faults and non-sensor fault are covered by the proposed FDI method. The proposed sensor FDI method is not influenced by machine imbalance, feasible for FDI of both single and multiple machine current sensor faults, and capable of distinguishing between machine current sensor …

Shortest Path Calculation Using Contraction Hierarchy Graph Algorithms On Nvidia Gpus, Roozbeh Karimi

LSU Doctoral Dissertations

PHAST is to date one of the fastest algorithms for performing single source shortest path (SSSP) queries on road-network graphs. PHAST operates on graphs produced in part using Geisberger's contraction hierarchy (CH) algorithm. Producing these graphs is time consuming, limiting PHAST's usefulness when graphs are not available in advance. CH iteratively assigns scores to nodes, contracts (removes) the highest-scoring node, and adds shortcut edges to preserve distances. Iteration stops when only one node remains. Scoring and contraction rely on a witness path search (WPS) of nearby nodes. Little work has been reported on parallel and especially GPU CH algorithms. This …

Bibliometric Survey Of Privacy Of Social Media Network Data Publishing, Rupali Gangarde Ass. Prof., Amit Sharma Dr., Ambika Pawar Dr.

Library Philosophy and Practice (e-journal)

We are witness to see exponential growth of the social media network since the year 2002. Leading social media networking sites used by people are Twitter, Snapchats, Facebook, Google, and Instagram, etc. The latest global digital report (Chaffey and Ellis-Chadwick 2019) states that there exist more than 800 million current online social media users, and the number is still exploding day by day. Users share their day to day activities such as their photos and locations etc. on social media platforms. This information gets consumed by third party users, like marketing companies, researchers, and government firms. Depending upon the purpose, …

The Art Of Selecting Phd Students: Combination Of Bibliometric And Ahp Approach, Preeti Mulay Dr., Rahul Raghvendra Joshi Prof., Sophia Gaikwad Dr.

Library Philosophy and Practice (e-journal)

For the PhD guide or the advisor selecting the accurate PhD scholar is the most elephantine task. It actually requires an art for the perfect selection; as the length, breadth, depth and volume of PhD work is spread across the years and this relationship between the scholar and the guide should start and flourish positively for the immense experience throughout the PhD process. Hence it was essential to understand bibliometric details including how many researchers have already published their contributions in the form of papers and patents, in the Scopus database. In addition to the bibliometric details, in this study, …

Document Layout Analysis And Recognition Systems, Sai Kosaraju

Master of Science in Computer Science Theses

Automatic extraction of relevant knowledge to domain-specific questions from Optical Character Recognition (OCR) documents is critical for developing intelligent systems, such as document search engines, sentiment analysis, and information retrieval, since hands-on knowledge extraction by a domain expert with a large volume of documents is intensive, unscalable, and time-consuming. There have been a number of studies that have automatically extracted relevant knowledge from OCR documents, such as ABBY and Sandford Natural Language Processing (NLP). Despite the progress, there are still limitations yet-to-be solved. For instance, NLP often fails to analyze a large document. In this thesis, we propose a knowledge …