Computer Engineering Commons^™

Throughput Vs. Distance Tradeoffs And Deployment Considerations For A Multi-Hop Ieee 802.16e Railroad Test Bed, Wei Wang, Hamid Sharif, Ting Zhou, Puttipong Mahasukhon

Department of Electrical and Computer Engineering: Faculty Publications (to 2015)

Throughput vs. distance analysis and coverage requirements are critical issues in planning wireless network deployments. With the recent availability of IEEE 802.16e and its promise of larger coverage areas for high-speed data communication, evaluating it in a real-world environment is very important to us in our ongoing study of standards based wireless technologies for the Federal Railroad Administration (FRA). In this paper, we present results obtained with our IEEE 802.16e module for NS-2, particularly throughput vs. distance performance, and its consideration for designing a real-world multi-hop IEEE 802.16e testbed. Firstly, a quantitative analysis of throughput vs. distance performance is conducted …

Development And Performance Evaluation Of A Flexible, Low Cost Manet, M. Abolhasan, B. Hagelstein, J.C-P. Wang, D.R. Franklin, F Safaei, Tadeusz Wysocki

Department of Electrical and Computer Engineering: Faculty Publications (to 2015)

Performance evaluations of multi-hop ad hoc network routing protocols have been primarily conducted through analytic and simulation-based studies, which frequently fail to accurately predict real-world performance and behaviour. One reason for this is the challenge in developing low cost, representative test beds with the degree of flexibility and mobility required. We have developed a Portable Wireless Ad hoc Node (PWAN) device which establishes multi-hop routes using the OLSR routing protocol. The PWAN’s performance has been investigated using two test bed configurations to evaluate its capacity under conditions of high node density in a short-range, multi-hop environment. Our results illustrate that …

A Theoretical Framework For Quality-Aware Cross-Layer Optimized Wireless Multimedia Communications, Song Ci, Haohong Wang, Dalei Wu

Department of Electrical and Computer Engineering: Faculty Publications

Although cross-layer has been thought as one of themost effective and efficient ways formultimedia communications over wireless networks and a plethora of research has been done in this area, there is still lacking of a rigorous mathematical model to gain indepth understanding of cross-layer design tradeoffs, spanning from application layer to physical layer. As a result, many existing cross-layer designs enhance the performance of certain layers at the price of either introducing side effects to the overall system performance or violating the syntax and semantics of the layered network architecture. Therefore, lacking of a rigorous theoretical study makes existing cross-layer …

Effects Of Wind Field Inhomogeneities On Doppler Beam Swinging Revealed By An Imaging Radar, B.L. Cheong, T.-Y. Yu, Robert D. Palmer, K.-F. Yang, Michael Hoffman, S.J. Frasier, F.J. Lopez-Dekker

Department of Electrical and Computer Engineering: Faculty Publications

In this work, the accuracy of the Doppler beam-swinging (DBS) technique for wind measurements is studied using an imaging radar—the turbulent eddy profiler (TEP) developed by the University of Mas- sachusetts, with data collected in summer 2003. With up to 64 independent receivers, and using coherent radar imaging (CRI), several hundred partially independent beams can be formed simultaneously within the volume defined by the transmit beam. By selecting a subset of these beams, an unprecedented number of DBS configurations with varying zenith angle, azimuth angle, and number of beams can be investigated. The angular distributions of echo power and radial …

Identifying And Explaining Map Quality Through Provenance: A User Study, Nicholas Ricky Del Rio, Paulo Pinheiro Da Silva

Departmental Technical Reports (CS)

Applications deployed on cyber-infrastructures often rely on multiple data sources and distributed compute resources to access, process, and derive results. When application results are maps, it is possible that non-intentional imperfections can get introduced into the map generation processes because of several reasons including the use of low quality datasets, use of data filtering techniques incompatible for the kind of map to be generated, or even the use of inappropriate mapping parameters, e.g., low-resolution gridding parameters. Without some means for accessing and visualizing the provenance associated with map generation processes, i.e., metadata about information sources and methods used to derive …

Equidecomposability (Scissors Congruence) Of Polyhedra In R^3 And R^4 Is Algorithmically Decidable: Hilbert's 3rd Problem Revisited, Vladik Kreinovich

Departmental Technical Reports (CS)

No abstract provided.

Use Of Characteristic Basis Function Method For Scattering From Terrain Profiles, Atacan Yağbasan, Celal Alp Tunç, Vakur B. Ertürk, Ayhan Altintas, Raj Mittra

Turkish Journal of Electrical Engineering and Computer Sciences

An integral equation (IE) based solution procedure is presented for the rigorous analysis of scattering from terrain profiles. The procedure uses characteristic basis function method (CBFM), which is hybridized with the forward-backward method (FBM), to reduce the storage requirements of the resultant Method of Moments (MoM) impedance matrix, as well as to accelerate the solution procedure. Numerical results in the form of induced current and scattered field are presented to assess the accuracy and efficiency of the solution procedure.

Optimizing Dynamic Logic Realizations For Partial Reconfiguration Of Field Programmable Gate Arrays, Matthew Parris

Electronic Theses and Dissertations

Many digital logic applications can take advantage of the reconfiguration capability of Field Programmable Gate Arrays (FPGAs) to dynamically patch design flaws, recover from faults, or time-multiplex between functions. Partial reconfiguration is the process by which a user modifies one or more modules residing on the FPGA device independently of the others. Partial Reconfiguration reduces the granularity of reconfiguration to be a set of columns or rectangular region of the device. Decreasing the granularity of reconfiguration results in reduced configuration filesizes and, thus, reduced configuration times. When compared to one bitstream of a non-partial reconfiguration implementation, smaller modules resulting in …

Dynamic Task Allocation In Mobile Robot Systems Using Utility Funtions, Scott Vander Weide

Electronic Theses and Dissertations

We define a novel algorithm based on utility functions for dynamically allocating tasks to mobile robots in a multi-robot system. The algorithm attempts to maximize the performance of the mobile robot while minimizing inter-robot communications. The algorithm takes into consideration the proximity of the mobile robot to the task, the priority of the task, the capability required by the task, the capabilities of the mobile robot, and the rarity of the capability within the population of mobile robots. We evaluate the proposed algorithm in a simulation study and compare it to alternative approaches, including the contract net protocol, an approach …

Delay Sensitive Routing For Real Time Traffic Over Ad-Hoc Networks, Dipika Darshana

Electronic Theses and Dissertations

Wireless ad hoc network consists of inexpensive nodes that form a mobile communication network. Due to limitations of the transmission range, the nodes rely on each other to forward packets such that messages can be delivered across the network. The selection of the path along which a packet is forwarded from the source node to the destination node is done by the routing algorithm. Most commonly used routing algorithms, though effective for non-real time applications, cannot handle real-time applications that require strict delay bounds on packet delivery. In this thesis, we propose a routing protocol that ensures timely delivery of …

A Competitive Reconfiguration Approach To Autonomous Fault Handling Using Genetic Algorithms, Kening Zhang

Electronic Theses and Dissertations

In this dissertation, a novel self-repair approach based on Consensus Based Evaluation (CBE) for autonomous repair of SRAM-based Field Programmable Gate Arrays (FPGAs) is developed, evaluated, and refined. An initial population of functionally identical (same input-output behavior), yet physically distinct (alternative design or place-and-route realization) FPGA configurations is produced at design time. During run-time, the CBE approach ranks these alternative configurations after evaluating their discrepancy relative to the consensus formed by the population. Through runtime competition, faults in the logical resources become occluded from the visibility of subsequent FPGA operations. Meanwhile, offspring formed through crossover and mutation of faulty and …

A Reinforcement Learning Technique For Enhancing Human Behavior Models In A Context-Based Architecture, David Aihe

Electronic Theses and Dissertations

A reinforcement-learning technique for enhancing human behavior models in a context-based learning architecture is presented. Prior to the introduction of this technique, human models built and developed in a Context-Based reasoning framework lacked learning capabilities. As such, their performance and quality of behavior was always limited by what the subject matter expert whose knowledge is modeled was able to articulate or demonstrate. Results from experiments performed show that subject matter experts are prone to making errors and at times they lack information on situations that are inherently necessary for the human models to behave appropriately and optimally in those situations. …

Information Technology Systems And Services, Doris Bornhoeft

UND Departmental Histories

This departmental history was written on the occasion of the UND Quasquicentennial in 2008.

Information Systems And Business Education, University Of North Dakota

UND Departmental Histories

This departmental history was written on the occasion of the UND Quasquicentennial in 2008.

Analysis Of Information Remaining On Hand Held Devices Offered For Sale On The Second Hand, Andy Jones, Craig Valli, Iain Sutherland

Journal of Digital Forensics, Security and Law

The ownership and use of mobile phones, Personal Digital Assistants and other hand held devices is now ubiquitous both for home and business use. The majority of these devices have a high initial cost, a relatively short period before they become obsolescent and a relatively low second hand value. As a result of this, when the devices are replaced, there are indications that they tend to be discarded. As technology has continued to develop, it has led to an increasing diversity in the number and type of devices that are available, and the processing power and the storage capacity of …

Economic Sustainability Of Remote Access Networking Classrooms, C Nuangjamnong, S P. Maj, D Veal

EDU-COM International Conference

Within the higher education domain, there is a prevalent belief that e-learning, virtual classroom and tele-education are essential requirements for the long-term effectiveness and success of educational institutions. Many information technologies have been adopted to assist studying and learning remotely and are hence potentially beneficial to students, teachers and educational providers. For educational providers, the benefits are that there are no physical or geographical limits to the number of students that can be enrolled in a course of study. However, within the field of network technology, students must actually use network devices during their studies. This is important not only …

Comparison Of Rectangular And Cylindrical Fdtd Representations On A Ring Resonator Problem, Funda Akleman, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

The aim of this paper is to discuss rectangular and cylindrical representations of finite-difference time-domain (FDTD) method over characteristic tests and comparisons. A ring resonator is chosen as a canonical structure and modeled with both rectangular- and cylindrical-FDTD packages. Calibration against analytical exact solution derived in terms of cylindrical Bessel functions is also performed. It is shown that rectangular-FDTD with periodic boundary condition, where the computation domain is reduced, can also be applied in modeling circular structures.

Functorial Coalgebraic Logic: The Case Of Many-Sorted Varieties, Alexander Kurz, Daniela Petrişan

Engineering Faculty Articles and Research

Following earlier work, a modal logic for T-coalgebras is a functor L on a suitable variety. Syntax and proof system of the logic are given by presentations of the functor. This paper makes two contributions. First, a previous result characterizing those functors that have presentations is generalized from endofunctors on one-sorted varieties to functors between many-sorted varieties. This yields an equational logic for the presheaf semantics of higher-order abstract syntax. As another application, we show how the move to functors between many-sorted varieties allows to modularly combine syntax and proof systems of different logics. Second, we show how to associate …

A Review Of Negation In Clinical Texts, John D. Kelleher, Brian Mac Namee

Reports

Negation is commonly seen in clinical documents [Chapman et al., 2001a] ”In clinical reports the presence of a term does not necessarily indicate the presence of the clinical condition represented by that term. In fact, many of the most frequently described findings and diseases in discharge summaries, radiology reports, history and physical exams, and other transcribed reports are denied in the patient” [Chapman et al., 2001b, page. 301].

Patient-Centred Laboratory Validation Using Software Agents, John Mcgrory, Jane Grimson, Frank Clarke, Peter Gaffney

Conference Papers

Guidelines are self-contained documents which healthcare professionals reference to obtain knowledge about a specific condition or process. They interface with these documents and apply known facts about specific patients to gain useful supportive information to aid in developing a diagnosis or manage a condition. To automate this process a series of Standard Operating Procedures (SOP) and workflow processes are constructed using the contents of these documents in order to manage the validation flow of a patient sample. These processes decompose the guidelines into workflow plans, which are then called using condition triggers controlled by a centralised management engine. The software …

Linguatag: An Emotional Speech Analysis Application, Charlie Cullen, Brian Vaughan, Spyros Kousidis

Conference papers

The analysis of speech, particularly for emotional content, is an open area of current research. Ongoing work has developed an emotional speech corpus for analysis, and defined a vowel stress method by which this analysis may be performed. This paper documents the development of LinguaTag, an open source speech analysis software application which implements this vowel stress emotional speech analysis method developed as part of research into the acoustic and linguistic correlates of emotional speech. The analysis output is contained within a file format combining SMIL and SSML markup tags, to facilitate search and retrieval methods within an emotional speech …

Emotional Speech Corpora For Analysis And Media Production, Charlie Cullen, Brian Vaughan, Spyros Kousidis

Conference papers

Research into the acoustic correlates of emotional speech as part of the SALERO project has led to the construction of high quality emotional speech corpora, which contain both IMDI metadata and acoustic analysis data for each asset. Research into semi-automated, re-usable character animation has considered the development of online workflows based on speech corpus assets that would provide a single point of origin for character animation in media production. In this paper, a brief description of the corpus design and construction is given. Further, a prototype workflow for semi-automated emotional character animation is also provided, alongside a description of current …

Augmented Control Of Hands Free Voice Prostheses, Brian Madden, James Condron, Ted Burke, Eugene Coyle

Conference Papers

Laryngectomy patients often use an electrolarynx to facilitate speech following a tracheotomy. Devices of this type provide the most intelligible means of communication for tracheotomy patients. However, the electro-larynx has inherent drawbacks such as the buzzing monotonic sound emitted, the need for a free hand to operate the device, and the difficulty experienced by many tracheotomy patients in adapting to use it. The most effective means of addressing the shortcomings of existing electro-larynges is to provide the user with a hands-free facility. This allows the user to perform other manual tasks whilst speaking, or simply to communicate more effectively through …

Software Agents Representing Medical Guidelines, John Mcgrory, Jane Grimson, Frank Clarke, Peter Gaffney

Conference Papers

Guidelines are self-contained documents which healthcare professionals reference to obtain specific disease or medical condition knowledge for a particular population cohort. They view these documents and apply known facts about their patients to access useful supportive information to aid in developing a diagnosis or manage a condition. Traditional CIG models decompose these guidelines into workflow plans, which are then called using certain motivational trigger conditions controlled by a centralised management engine.

Therefore, CIG guidelines are not self-contained documents, which specialise in a particular condition or disease, but are effectively a list of workflow plans, which are called and used when …

Generation Of High-Repetition-Rate Pulses Utilizing Cascaded Single Mode Fiber And Semiconductor Optical Amplifier, Jianwei Wu, Hai-Bo Bao

Turkish Journal of Electrical Engineering and Computer Sciences

To generate high-repetition-rate optical pulses, a novel and simple device is demonstrated, in which the cascaded single mode fiber (SMF) with negative third order dispersion and semiconductor optical amplifier (SOA) are adopted. Numerical research results show that let an optical pulse with center wavelength in zero dispersion wavelength of optical fiber transit in SMF for generating an oscillation pulse. Subsequently, the followed SOA is provided for amplification. As a consequence, the high-repetition-rate optical pulses can be obtained.

A Study On The Reliability Of Polyester Insulators Blended With Borax, Aysel Ersoy, Yasi̇n Özcelep, Ayten Kuntman

Turkish Journal of Electrical Engineering and Computer Sciences

Tracking is the main factor which limits the safe working electric stress of insulation in power system applications. Polymer samples have been tested in laboratory conditions according to ASTM D2303 on accelerated inclined plane tracking test. In this paper, a model based on improved Weibull statistics is proposed for estimating the breakdown time of polymeric insulating materials with borax. The confidence intervals of the Weibull shape parameter and the Weibull scale parameter are determined for the borax concentration values using the Weibull 7++ program.

A Novel Theoretical Procedure To Determine Absorption And Gain Coefficients In A Symmetric Single Step-Index Quantum Well Laser, Mustafa Temi̇z, Özgür Önder Karakilinç, Mehmet Ünal

Turkish Journal of Electrical Engineering and Computer Sciences

If the indices n_{II}, n_{I,III} of the regions, the thickness 2a of the active region (AR) and the wavelength \lambda for a single symmetric step-index quantum well laser (SSSIQWL) are given, the normalized propagation constant (NPC) \alpha is obtained. In this novel method, absorption and gain coefficients for the SSSIQWL have been obtained in terms of the NPCs \alpha in the even and odd fields, directly.

Online Tuning Of Set-Point Regulator With A Blending Mechanism Using Pi Controller, Engi̇n Yeşi̇l, Müjde Güzelkaya, İbrahi̇m Eksi̇n, Ö. Aydin Teki̇n

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a new control structure that exploits the advantages of one degree of freedom (1-DOF) and two degree of freedom (2-DOF) control structures with an online tuned set-point regulator with blending mechanism (SPR-BM) is proposed. In this structure, the filtered output of the reference and the pure reference signals are blended so that the overall performance of the system is ameliorated with respect to load disturbance rejection and set-point following. Internal Model Control (IMC) based PI controller is used as the primary controller and the blending dynamics are determined with the aim of producing a system output that …

A New Approach Using Temporal Radial Basis Function In Chronological Series, Mustapha Guezouri

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, we present an extended form of Radial Basis Function network called Temporal-RBF (T-RBF) network. This extended network can be used in decision rules and classification in Spatio-Temporal domain applications, like speech recognition, economic fluctuations, seismic measurements and robotics applications. We found that such a network complies with relative ease to constraints such as capacity of universal approximation, sensibility of node, local generalisation in receptive field, etc. For an optimal solution based on a probabilistic approach with a minimum of complexity, we propose two TRBF models (1 and 2). Application to the problem of Mackey-Glass time series has …

Recent Advances In Perfectly Matched Layers In Finite Element Applications, Özlem Özgün, Mustafa Kuzuoğlu

Turkish Journal of Electrical Engineering and Computer Sciences

We present a comparative evaluation of two novel and practical perfectly matched layer (PML) implementations to the problem of mesh truncation in the finite element method (FEM): locally-conformal PML, and multi-center PML techniques. The most distinguished feature of these methods is the simplicity and flexibility to design conformal PMLs over challenging geometries, especially those with curvature discontinuities, in a straightforward way without using artificial absorbers. These methods are based on specially- and locally-defined complex coordinate transformations inside the PML region. They can easily be implemented in a conventional FEM by just replacing the nodal coordinates inside the PML region by …