Computer Engineering Commons^™

Shared-Data Or Message Passing Computing Models – A Human Factor In Technical Choices, Angela Sodan, Luiz Fernando Capretz

Electrical and Computer Engineering Publications

No abstract provided.

Congruent Weak Conformance, Ronald W. Brower

Theses and Dissertations

This research addresses the problem of verifying implementations against specifications through an innovative logic approach. Congruent weak conformance, a formal relationship between agents and specifications, has been developed and proven to be a congruent partial order. This property arises from a set of relations called weak conformations. The largest, called weak conformance, is analogous to Milner's observational equivalence. Weak conformance is not an equivalence, however, but rather an ordering relation among processes. Weak conformance allows behaviors in the implementation that are unreachable in the specification. Furthermore, it exploits output concurrencies and allows interleaving of extraneous output actions in the implementation. …

Design And Evaluation Of Processes For Fuel Fabrication: Year 1 Final Report, Georg F. Mauer

Fuels Campaign (TRP)

The project objective is the design and evaluation of manufacturing processes for transmuter fuel fabrication. The large-scale deployment of remote fabrication and refabrication processes will be required for all transmutation scenarios. Current program emphasis is on a five-year effort to determine the feasibility of transmutation as a technology to limit the need for repository storage of spent commercial fuel. The evaluation of the fabrication processes will create a decision support data base to document design, operations, and costs. Fabrication processes required for different fuel types differ in terms of equipment types, throughput, and cost. The year 1 project was focused …

Protection And Restoration Algorithms For Wdm Optical Networks, Pitipatana Sakarindr

Theses

Currently, Wavelength Division Multiplexing (WDM) optical networks play a major role in supporting the outbreak in demand for high bandwidth networks driven by the Internet. It can be a catastrophe to millions of users if a single optical fiber is somehow cut off from the network, and there is no protection in the design of the logical topology for a restorative mechanism. Many protection and restoration algorithms are needed to prevent, reroute, and/or reconfigure the network from damages in such a situation. In the past few years, many works dealing with these issues have been reported. Those algorithms can be …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #4, Georg F. Mauer

Fuels Campaign (TRP)

The fourth quarter of the project covered the following:

• Literature Search: The process of evaluating the pertinent literature continued. Results are summarized.

• Mr. Richard Silva developed a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project.

• Dr. Mauer visited CEA Cadarache and CEA Marcoule in France, the institute for transuranics in Karlsruhe, and the Framatome manufacturing plant in Lingen, Germany.

• Concepts and Methods for Vision-Based Hot Cell Supervision and control (Ph.D. Student Jae-Kyu Lee )

Design And Evaluation Of Processes For Fuel Fabrication: Year 1 Final Report, Georg F. Mauer

Fuels Campaign (TRP)

The project objective is the design and evaluation of manufacturing processes for transmuter fuel fabrication. The large-scale deployment of remote fabrication and refabrication processes will be required for all transmutation scenarios. Current program emphasis is on a five-year effort to determine the feasibility of transmutation as a technology to limit the need for repository storage of spent commercial fuel. The evaluation of the fabrication processes will create a decision support data base to document design, operations, and costs. Fabrication processes required for different fuel types differ in terms of equipment types, throughput, and cost. The year 1 project was focused …

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: I. Swamp Water, Sulistyoweni Widanarko, Henki W. Ashadi, Andri Krisnadi Wicaksono

Makara Journal of Technology

Most of infrastructures using steel concrete to reinforce the strength of concrete. Steel concrete is so vulnerable to chemical compounds that can cause corrosion. It can happen due to the presence of chemical compounds in acid environment in low pH level. These chemical compounds are SO4 2-, Cl-, NO3 -. There are many swamp area in Indonesia. The acid contents and the concentration of ion sulphate, chlorides, and nitrate are higher in the swamp water than in the ground water .The objective of this research was to find out the influence of corrosive chemicals in the swamp water to the …

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: Ii. Swamp Sludges, Henki W. Ashadi, Sulistyoweni Widanarko, Irma Gusniani

Makara Journal of Technology

A polluted environment will influence the building age. The objective of this research was to find out the influence of corrosive chemicals within the sludge swamp area with the corrosion rate of steel concrete. Corrosion in steel concrete usually occur in acid area which contain of SO4 2-, Cl- and NO3 -. The research treatment used by emerging ST 37 and ST 60 within 60 days in ‘polluted’ sludge swamp area. Three variation of ‘polluted’ swamp sludge were made by increasing the concentration a corrosive unsure up to 1X, 5X and 10X. The corrosion rate measured by using an Immersion …

The Effect Of Ca Content On Cao-Zeolite On Nitrogen Adsorption Capacity, Mohammad Nasikin, Tania Surya Utami, Agustina Tp Siahaan

Makara Journal of Technology

In industry, Ca zeolite is used as nitrogen selective adsorbent with the use of PSA (Pressure Swing Adsorption)/VSA (Vacuum Swing Adsorption) methods. Natural zeolite modified to be Cao-zeolite by ion exchange process using Ca(OH)2. Adsorption test was done on CaO-zeolite with different Ca concentration to understand how it’s adsorption phenomena on oxygen and nitrogen. Adsorption test has been done for CaO-zeolite with Ca concentration = 0,682%, 0,849% and 1,244% to oxygen and nitrogen with equal concentration seperately. Pressure variation has being done three times (5 minutes long each time) adsorption time to analyze the connection between adsorption time and how …

Cetane Number Booster Additive For Diesel Fuel Synthesized From Coconut Oil, Mohammad Nasikin, Rita Arbianti, Abdul Azis

Makara Journal of Technology

To reduce NOx, SOx, HC, and particulates that produce because of using diesel fuel, can be done by increasing cetane number. One of methods is adding an additive to diesel fuel. 2-Ethyl Hexyl Nitrate (2-EHN) is a commercial additive that an organic nitrate. Making an additive in this research is used palm oil by nitration reaction that used HNO3 and H2SO4. Result of this reaction is methyl ester nitrate that has a structure looks like 2-EHN. IR spectra from research show that methyl ester nitrate is indicated by spectrum NO2 at 1635 cm-1. This result show that methyl ester nitrate …

Analogy Method Development For Cost Estimation Of Software Design, Riyanarto Sarno, Joko Lianto Buliali, Siti Maimunah

Makara Journal of Technology

The important aspect of planning and managing software development project is to estimate the cost of a project. There are several methods for estimating the cost of a software development project, and the Analogy method is a method which gives relatively better estimates. This paper shows that the modified Analogy method selects a closer project reference, estimates more accurate project effort and cost. This study enhances the cost estimate technique by including valid and complete cost parameters, therefore the estimate of a project cost is better than the result of the standard Analogy method.

The Role Of Si3n4 Amorphous Phase In Nc-Tin/A-Si3n4 Nanocomposites In Increases The Hardness And Thermal Stability, Keba Moto

Makara Journal of Technology

The role of Si3N4 amorphous phase in nc-TiN/a-Si3N4 nanocomposites will be shown and compared with polycrystalline ZrN/Ni which has no such amorphous phase (non-composites). The presence of amorphous phase Si3N4 increases the hardness of film as well as the toughness of the bulk nanocomposites under indentation load. It has been observed that nc-TiN/a-Si3N4 nanocomposites films has higher thermal stability than ZrN/Ni polycrystalline films.

Biodiesel's Characteristics Preparation From Palm Oil, Tilani Hamid. S, Rachman Yusuf

Makara Journal of Technology

Biodiesel’s characteristics preparation from palm oil. Using vegetable oils directly as an alternative diesel fuel has presented engine problems. The problems have been attributed to high viscosity of vegetable oil that causes the poor atomization of fuel in the injector system and pruduces uncomplete combustion. Therefore, it is necessary to convert the vegetable oil into ester (metil ester) by tranesterification process to decrease its viscosity. In this research has made biodiesel by reaction of palm oil and methanol using lye (NaOH) as catalyst with operation conditions: constant temperature at 60 oC in atmosferic pressure, palm oil : methanol volume ratio …

Development Of Hardness Measurement Procedure For Nanocomposite Nc-Tin/A-Si3n4, Keba Moto

Makara Journal of Technology

Hardness of nc-TiN/a-Si3N4 nanocomposites which was determined by using two methods of measurements i. e. depth sensing method and remaining plastic indentation area that were magnified by using SEM (Scanning Electron Microscope) lie in the good agreement. The hardness value is not influenced by the biaxial and residual compressive stress. The measurement of the biaxial stress on the substrate shows a very small value of biaxial stress as well as the constant hardness and crystallite size against annealing temperature. Therefore, the reported hardness value here is the intrinsic value that depend on its microstructure properties.

From [0,1]-Based Logic To Interval Logic (From Known Description Of All Possible [0,1]-Based Logical Operations To A Description Of All Possible Interval-Based Logical Operations), Hung T. Nguyen, Vladik Kreinovich

Departmental Technical Reports (CS)

Since early 1960s, we have a complete description of all possible [0,1]-based logical operations, namely of "and"-operations (t-norms) and of "or"-operations (t-conorms). In some real-life situations, intervals provide a more adequate way of describing uncertainty, so we need to describe interval-based logical operations. Usually, researchers followed a pragmatic path and simply derived these operations from the [0,1]-based ones. From the foundational viewpoint, it is desirable not to a priori restrict ourselves to such derivative operations but, instead, to get a description of all interval-based operations which satisfy reasonable properties.

Such description is presented in this paper. It turns out that …

Interval Computations Related To Privacy In Statistical Databases, Luc Longpre, Vladik Kreinovich

Departmental Technical Reports (CS)

We show that the need to maintain privacy in statistical databases naturally leads to interval computations, and provide feasible algorithms for the corresponding interval computation problems.

An Introductory Digital Design Course Using A Low–Cost Autonomous Robot, Tyson S. Hall, Kimberly E. Newman, James O. Hamblen

Faculty Works

This paper describes a new digital design laboratory developed for undergraduate students in this electrical and computer engineering curriculum. A top-down rapid prototyping approach with commercial computer-aided design tools and field-programmable logic devices (FPLDs) is used for laboratory projects. Students begin with traditional transistor–transistor logic-based projects containing a few gates and progress to designing a simple 16-bit computer, using very high-speed integrated circuits hardware description language (VHDL) synthesis tools and an FPLD. To help motivate students, the simple computer design is programmed to control a small autonomous robot with two servo drive motors and several sensors. The laboratory concludes with …

Organizing And Personalizing Intelligence Gathering From The Web, Hwee-Leng Ong, Ah-Hwee Tan, Jamie Ng, Pan Hong, Qiu-Xiang Li

Research Collection School Of Computing and Information Systems

In this paper, we describe how an integrated web‐based application, code‐named FOCI (Flexible Organizer for Competitive Intelligence), can help the knowledge worker in the gathering, organizing, tracking and dissemination of competitive intelligence (CI). It combines the use of a novel user‐configurable clustering, trend analysis and visualization techniques to manage information gathered from the web. FOCI allows its users to define and personalize the organization of the information clusters according to their needs and preferences into portfolios. These personalized portfolios created are saved and can be subsequently tracked and shared with other users. The paper runs through an example to show …

Multicast Routing Algorithms And Failure Analyses For Low Earth Orbit Satellite Communication Networks, Jae Soong Lee

Theses and Dissertations

In the rapidly changing environment of mobile communications, the importance of the mobile satellite (e,g,, low earth orbit satellites (LEOsats)) networks will increase due to their global visibility and connection. Multicasting is an effective communication method in terms of frequency spectrum usage for a LEO network. It is devised to provide lower network traffic (i,e,, one-to-many transmissions). This research examines the system performance of two dissimilar terrestrially-based multicasting protocols: the Distance Vector Multicast Routing Protocol (DVMRP) and the On Demand Multicast Routing Protocol (ODMRP). These two protocols are simulated in large group membership density and in the presence of satellite …

Content Aware Request Distribution For High Performance Web Service: A Performance Study, Robert M. Jones

Dissertations and Theses

The World Wide Web is becoming a basic infrastructure for a variety of services, and the increases in audience size and client network bandwidth create service demands that are outpacing server capacity. Web clusters are one solution to this need for high performance, highly available web server systems. We are interested in load distribution techniques, specifically Layer-7 algorithms that are content-aware. Layer-7 algorithms allow distribution control based on the specific content requested, which is advantageous for a system that offers highly heterogenous services. We examine the performance of the Client Aware Policy (CAP) on a Linux/Apache web cluster consisting of …

Analysis Of Error Recovery Effects On Digital Flight Control Systems, Arturo Tejada Ruiz

Electrical & Computer Engineering Theses & Dissertations

Life-critical, real-time applications like flight-by-wire aircraft, rely on closed-loop digital control systems and fault-tolerant computer systems to reliably achieve the desired operation. The computer systems, however, may be affected by random hardware/software faults induced mainly by environmental conditions such as high intensity radiated fields (HIRF) and lightning. These harsh electromagnetic environments are known to induce common­ mode faults (CMF) in aircraft electronic systems, which disrupt fault-tolerant provisions and possibly affect the operation of the digital control system. Current flight-by-wire aircraft have computer systems that can neither detect CMF nor recover from them. New systems are under investigation that can recover …

A Comparative Application Of Telecommunication Traffic Forecasting Methods To A Backbone Link In Tanzania, M. L. Luhanga

Tanzania Journal of Engineering and Technology (TJET)

In this paper various mathematical models to characterize and forecast telecommunication traffic time series traffic have been applied, and the ranges of validity of the models are determined by comparing them with measured traffic data using the measurement errors criteria method which resulted into the superior model. Based on this model the ARIMA (0,2,1) model for smoothed data, the traffic forecast findings show that by the year 2006, the traffic demand will exceed the current installed capacity of 140 Mbps in the Tanzania Telecommunications Company Limited (TTCL) network along the major link between the Dar es Salaam and Dodoma backbone …

Autoassociative-Heteroassociative Neural Network, Claudia V. Kropas-Hughes, Steven K. Rogers, Mark E. Oxley, Matthew Kabrisky

AFIT Patents

An efficient neural network computing technique capable of synthesizing two sets of output signal data from a single input signal data set. The method and device of the invention involves a unique integration of autoassociative and heteroassociative neural network mappings, the autoassociative neural network mapping enabling a quality metric for assessing the generalization or prediction accuracy of the heteroassociative neural network mapping.

Kolmogorov Complexity And Chaotic Phenomena, Vladik Kreinovich, Isaak A. Kunin

Departmental Technical Reports (CS)

Born about three decades ago, Kolmogorov Complexity Theory (KC) led to important discoveries that, in particular, give a new understanding of the fundamental problem: interrelations between classical continuum mathematics and reality (physics, biology, engineering sciences, ...).

Specifically, in addition to the equations, physicists use the following additional difficult-to-formalize property: that the initial conditions and the value of the parameters must not be abnormal. We will describe a natural formalization of this property, and show that this formalization in good accordance with theoretical physics. At present, this formalization has been mainly applied to the foundations of physics. However, potentially, more practical …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 18, Number 9, June 2002, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

On Localized Control In Qos Routing, Srihari Nelakuditi, Srivatsan Varadarajan, Zhi-Li Zhang

Faculty Publications

In this note, we study several issues in the design of localized quality-of-service (QoS) routing schemes that make routing decisions based on locally collected QoS state information (i.e., there is no network-wide information exchange among routers). In particular, we investigate the granularity of local QoS state information and its impact on the design of localized QoS routing schemes from a theoretical perspective. We develop two theoretical models for studying localized proportional routing: one using the link-level information and the other using path-level information. We compare the performance of these localized proportional routing models with that of a global optimal proportional …

A Localized Adaptive Proportioning Approach To Qos Routing, Srihari Nelakuditi, Zhi-Li Zhang

Faculty Publications

In QoS routing, paths for flows are selected based on knowledge of resource availability at network nodes and the QoS requirements of flows. Several QoS routing schemes have been proposed that differ in the way they gather information about the network state and select paths based on this information. We broadly categorize these schemes into best path routing and proportional routing. The best path routing schemes gather global network state information and always select the best path for an incoming I-low,based on this global view. It has been shown that best path routing schemes require frequent exchange of network state, …

Three Dimensional Deformable Modeling Of The Spine, Rania Atef

Archived Theses and Dissertations

The purpose of this work is the development of a 3D deformable model of the spinal lumbar region. The data for the spine comes from the National Library of Medicine website (NLM). The 3D model uses several NURBS patches as modeling primitives. This work is part of a larger system aimed at building a 3D surgical simulator coupled with a force - feedback.PHANToM robot in a virtual reality CA VE system.

The input to this system is a set of two-dimensional CT images. They are processed and edge detected to produce a set of contoured images containing the vertebral data. …

Three-Dimensional Modeling Of The Lumbar Spine For Simulation Purposes, Ayman Hamdy Mohamed Kassem

Archived Theses and Dissertations

Human spine modeling started gaining its popularity in world war II for military purposes as a result of studying the phenomenon of pilot spine cracking during ejection. It started with simple beam modeling and continued to get more complicated and realistic. Modeling the spine is a challenging problem because of its detailed anatomical structure, the motion of soft and bone tissues and the deformations that occur during different loads. Realistic spine modeling is expected to have a significant impact in a world where spinal injuries and deformities account for a large percentage of all injuries. In this research, a spinal …

A Simplistic Plasma Dust Removal Model Employing Radiation Pressure, Robert A. Schill Jr.

Electrical & Computer Engineering Faculty Research

A simple heuristic model is developed to examine the feasibility of using radiation pressure as a means to transport plasma dust out of the path of the forthcoming electron or photon beam. A slow electromagnetic surface wave coupled to a planar target or substrate exerts the required pressure in the removal process. The model is examined using data and parameters from single-shot radiography experiments. Optimal source requirements are identified for a typical radiography experiment. Source energies and powers are a minimum over an optimum band of frequencies where both conduction and plasma oscillation effects are mutually significant. Above the band …