Computer Engineering Commons^™

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Prevention Is Better Than Prosecution: Deepening The Defence Against Cyber Crime, Jacqueline Fick

Journal of Digital Forensics, Security and Law

In the paper the author proposes that effectively and efficiently addressing cyber crime requires a shift in paradigm. For businesses and government departments alike the focus should be on prevention, rather than the prosecution of cyber criminals. The Defence in Depth strategy poses a practical solution for achieving Information Assurance in today’s highly networked environments. In a world where “absolute security” is an unachievable goal, the concept of Information Assurance poses significant benefits to securing one of an organization’s most valuable assets: Information. It will be argued that the approach of achieving Information Assurance within an organisation, coupled with the …

To License Or Not To License Revisited: An Examination Of State Statutes Regarding Private Investigators And Digital Examiners, Thomas Lonardo, Doug White, Alan Rea

Journal of Digital Forensics, Security and Law

In this update to the previous year's study, the authors examine statutes that regulate, license, and enforce investigative functions in each US state. After identification and review of Private Investigator licensing requirements, the authors find that very few state statutes explicitly differentiate between Private Investigators and Digital Examiners. After contacting all state agencies the authors present a distinct grouping organizing state approaches to professional Digital Examiner licensing. The authors conclude that states must differentiate between Private Investigator and Digital Examiner licensing requirements and oversight.

The Impact Of Hard Disk Firmware Steganography On Computer Forensics, Iain Sutherland, Gareth Davies, Nick Pringle, Andrew Blyth

Journal of Digital Forensics, Security and Law

The hard disk drive is probably the predominant form of storage media and is a primary data source in a forensic investigation. The majority of available software tools and literature relating to the investigation of the structure and content contained within a hard disk drive concerns the extraction and analysis of evidence from the various file systems which can reside in the user accessible area of the disk. It is known that there are other areas of the hard disk drive which could be used to conceal information, such as the Host Protected Area and the Device Configuration Overlay. There …

Electronic Forms-Based Computing For Evidentiary Analysis, Andy Luse, Brian Mennecke, Anthony M. Townsend

Journal of Digital Forensics, Security and Law

The paperwork associated with evidentiary collection and analysis is a highly repetitive and time-consuming process which often involves duplication of work and can frequently result in documentary errors. Electronic entry of evidencerelated information can facilitate greater accuracy and less time spent on data entry. This manuscript describes a general framework for the implementation of an electronic tablet-based system for evidentiary processing. This framework is then utilized in the design and implementation of an electronic tablet-based evidentiary input prototype system developed for use by forensic laboratories which serves as a verification of the proposed framework. The manuscript concludes with a discussion …

Graduate Accounting Students' Perception Of It Forensics: A Multi-Dimensional Analysis, Grover S. Kearns

Journal of Digital Forensics, Security and Law

Forensics and information technology (IT) have become increasingly important to accountants and auditors. Undergraduate accounting students are introduced to general IT topics but discussion of forensic knowledge is limited. A few schools have introduced an undergraduate major in forensic accounting. Some graduate schools offer accounting students an emphasis in forensic or fraud accounting that includes instruction in forensics and information technology. When students do not view the IT topics as being equally important to their careers as traditional accounting topics, these attitudes may reduce the quality of the course. In an effort to assess student attitudes, a survey of 46 …

Book Review: Cyber Security And Global Information Assurance: Threat Analysis And Response Solutions, Gary C. Kessler

Journal of Digital Forensics, Security and Law

I freely admit that this book was sent to me by the publisher for the expressed purpose of my writing a review and that I know several of the chapter authors. With that disclosure out of the way, let me say that the book is well worth the review (and I get to keep my review copy).
The preface to the book cites the 2003 publication of The National Strategy to Secure Cyberspace by the White House, and the acknowledgement by the U.S. government that our economy and national security were fully dependent upon computers, networks, and the telecommunications infrastructure. …

A Covert Encryption Method For Applications In Electronic Data Interchange, Jonathan Blackledge, Dmitry Dubovitskiy

Articles

A principal weakness of all encryption systems is that the output data can be ‘seen’ to be encrypted. In other words, encrypted data provides a ‘flag’ on the potential value of the information that has been encrypted. In this paper, we provide a new approach to ‘hiding’ encrypted data in a digital image.

In conventional (symmetric) encryption, the plaintext is usually represented as a binary stream and encrypted using an XOR type operation with a binary cipher. The algorithm used is ideally designed to: (i) generate a maximum entropy cipher so that there is no bias with regard to any …

Modelling Situation Awareness For Context‐Aware Decision Support, Yu-Hong Feng, Teck-Hou Teng, Ah-Hwee Tan

Research Collection School Of Computing and Information Systems

Situation awareness modelling is popularly used in the command and control domain for situation assessment and decision support. However, situation models in real-world applications are typically complex and not easy to use. This paper presents a Context-aware Decision Support (CaDS) system, which consists of a situation model for shared situation awareness modelling and a group of entity agents, one for each individual user, for focused and customized decision support. By incorporating a rule-based inference engine, the entity agents provide functions including event classification, action recommendation, and proactive decision making. The implementation and the performance of the proposed system are demonstrated …

High-Performance Broadcast And Multicast Protocols For Multi-Radio Multi-Channel Wireless Mesh Networks, Jun Wang

Electrical & Computer Engineering Theses & Dissertations

Recently, wireless mesh networks (WMNs) have attracted much attention. A vast amount of unicast, multicast and broadcast protocols has been developed for WMNs or mobile ad hoc networks (MANETs). First of all, broadcast and multicast in wireless networks are fundamentally different from the way in which wired networks function due to the well-known wireless broadcast/multicast advantage. Moreover, most broadcast and multicast protocols in wireless networks assume a single-radio single-channel and single-rate network model, or a generalized physical model, which does not take into account the impact of interference. This dissertation focuses on high-performance broadcast and multicast protocols designed for multi-radio …

Hierarchical Routing In Manets Using Simple Clustering, Adam Carnine

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis presents both a review of current MANET routing protocols and a new MANET routing algorithm. The routing protocols reviewed include representative samples from the three primary forms of routing found in MANETS: proactive routing, reactive routing and hybrid routing. Secure algorithms are given special treatment in the review. In addition several protocol enhancements are discussed.

The proposed routing protocol is designed to support networks of a medium size, containing over 200 nodes but less than 3,000 nodes. The design is intentionally simple to allow ease of implementation in comparison with other MANET protocols that provide similar functionality.

Electronic Differential With Direct Torque Fuzzy Control For Vehicle Propulsion System, Kada Hartani, Mohamed Bourahla, Yahia Miloud, Mohamed Sekour

Turkish Journal of Electrical Engineering and Computer Sciences

We model an electronic differential that will offer the best vehicle stability on a curved road. The proposed traction system consists of two permanent magnet synchronous (PMS) machines that ensure the drive of two back-driving wheels. The contribution of each wheel to the advance of the vehicle is represented by an element conveying the accumulation of mechanical coupling. The proposed control structure is based on the direct torque fuzzy control for each wheel-motor. Different simulations have been carried out: vehicle driven ons straight road, vehicle driven on straight road with slope, and vehicle driven over a road curved left and …

Accurate Prediction Of Crosstalk For Rc Interconnects, Selahatti̇n Sayil, Merlyn Rudrapati

Turkish Journal of Electrical Engineering and Computer Sciences

This work proposes an accurate crosstalk noise estimation method in the presence of multiple RC lines for use in design automation tools. The method correctly models the loading effects of non switching aggressors and aggressor tree branches using resistive shielding effect and realistic exponential input waveform. Noise peak and width expressions derived show very good results in comparison to HSPICE results. Results show that average error for noise peak is 4.1% and for the width is 6.8% while allowing for very fast analysis.

Voltage Control Of Self-Excited Induction Generator Using Genetic Algorithm, Dheeraj Joshi, Kanwarjit Singh Sandhu, Mahender Kumar Soni

Turkish Journal of Electrical Engineering and Computer Sciences

Self-excited induction generators (SEIG) are found to be most suitable candidate for wind energy conversion application required at remote windy locations. Such generators are not able to maintain the terminal voltage with load as, a literature survey reveals, the voltage profile falls sharply with load. In this paper an attempt has been made to improve the voltage profile of a self-excited induction generator. A new methodology based upon Genetic Algorithm (GA) is proposed to compute the steady state performance of the model including core loss branch. Further efforts are made to control the terminal voltage under loaded conditions. Simulated results …

Parameter Identification Of A Separately Excited Dc Motor Via Inverse Problem Methodology, Mounir Hadef, Mohamed Rachid Mekideche

Turkish Journal of Electrical Engineering and Computer Sciences

Identification is considered to be among the main applications of inverse theory and its objective for a given physical system is to use data which is easily observable, to infer some of the geometric parameters which are not directly observable. In this paper, a parameter identification method using inverse problem methodology is proposed. The minimisation of the objective function with respect to the desired vector of design parameters is the most important procedure in solving the inverse problem. The conjugate gradient method is used to determine the unknown parameters, and Tikhonov's regularization method is then used to replace the original …

Cdm Based Controller Design For Nonlinear Heat Exchanger Process, Erkan İmal

Turkish Journal of Electrical Engineering and Computer Sciences

Most processes are nonlinear, and their control is a difficult yet important problem. The heat exchanger is an example onesuch nonlinear process. In the present paper, the effect of process nonlinearity on the performance of set point tracking and disturbance rejection in two controller methods is investigated. Initially, afirst order plus dead time (FOPDT) model of the process is obtainedvia a software known as Loop-Pro Trainer. Then, the PI-controller tuning values are computed using the internal model control (IMC) correlations based on truncated (first-order) Taylor series approximation. Next, another controller is designed using the coefficient diagram method (CDM). Finally, the …

Polymorphic Worm Detection Using Strong Token-Pair Signatures, Burak Bayoğlu, İbrahi̇m Soğukpinar

Turkish Journal of Electrical Engineering and Computer Sciences

Malicious software has become a big threat to information systems, which are widely used to store, transfer and process information for many critical assets. Worms are one of the most harmful network-enabled malicious software that can threaten networks and applications. Two main characteristics of worms distinguish them from the well-known virus programs and as a result are much more dangerous than the virus programs. First, they do not need to attach themselves to an existing program. Second, worms do not require end-user interaction to realize the intended attack. Therefore, a large number of victims can be infected in a short …

Construction And Applications Of The Dirichlet-To-Neumann Operator In Transmission Line Modeling, Thomas Demeester, Daniel De Zutter

Turkish Journal of Electrical Engineering and Computer Sciences

The Dirichlet-to-Neumann (DtN) operator is a useful tool in the characterization of interconnect structures. In combination with the Method of Moments, it can be used for the calculation of the per-unit length transmission line parameters of multi-conductor interconnections, or to directly determine the internal impedance of conductors. This paper presents a new and fast calculation method for the DtN boundary operator in the important case of rectangular structures, based on the superposition of parallel-plate waveguide modes. Especially for its non-differential form, some numerical issues need to be addressed. It is further explained how the DtN operator can be determined for …

Variance And Kurtosis-Based Characterization Of Resonances In Stochastic Transmission Lines: Local Versus Global Random Geometries, Ousmane Sy, Martijn Van Beurden, Bastiaan Michielsen, Antonius Tijhuis

Turkish Journal of Electrical Engineering and Computer Sciences

A stochastic method is proposed to characterize electromagnetic couplings involving geometrically perturbed transmission lines. A combined exploitation of suitably defined statistical tools is presented to appreciate the intensity of the dispersion of response variables both physically via the variance, and statistically through the kurtosis or fourth-order moment. The usefulness of this method to analyze resonances is illustrated by the study of a transmission line affected by two different types of random geometrical perturbations, viz. a local deformation modeled by a wavelet and global sinusoidal undulations.

Experimantal Characterization And Equivalent Circuit Extraction Of Nanowires For Signal Integrity Applications, Giulio Antonini, Marco Di Clerico, Antonio Orlandi, Vittorio Ricchiuti, Maurizio Passacantando, Sandro Santucci

Turkish Journal of Electrical Engineering and Computer Sciences

This paper illustrates the design steps of a printed circuit board used as test vehicles for the measurement of the electrical properties of carbon nanotube's deposit. The board has been built and used for the measurements. The measured data are post-processed in order to extract the required properties of the only nanotubes. An equivalent circuit is extracted for further use in EDA simulators and the IEEE P1597 Standard is used to compare the results.

Conductive Emi Noise Measurement For Switched Reluctance Drive, Hao Chen, Xiaohui Qiu, Yang Zhao

Turkish Journal of Electrical Engineering and Computer Sciences

The component parts of the tested four-phase Switched Reluctance drive are described with the four-phase 8/6 structure double salient reluctance motor, the four-phase asymmetric bridge power converter and the 89C52 MCU digital controller. The conductive electromagnetic interference noise measurement equipment is described with the function of separated common-mode noise and differential-mode noise. The tested results of common-mode noise and differential-mode noise of the tested Switched Reluctance drive are presented and the tested results of frequency spectrum are given.

Emc Education At The University Of Technology Zurich, Gökhan Apaydin, Ni̇yazi̇ Ari

Turkish Journal of Electrical Engineering and Computer Sciences

This paper illustrates educational issues in electromagnetic compatibility (EMC) engineering in Switzerland and presents the contents of courses and practical materials for EMC education at the University of Technology Zurich. After giving the fundamentals of theoretical part, practical applications have been given to make students and engineers aware of EMC issues and its problems.

Electromagnetic Compatibility Engineering Education: Problems, Challenges And Perspectives, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

Education and training problems and challenges in EMC Engineering are discussed. The necessity of physics-based modeling (theory) and hands-on training (practice) are emphasized. An introductory level EMC lecture and a short course outline are given for modern EMC education.

Two Dimensional Ebg Structures For Multiband Noise Mitigation, Antonio Orlandi, Antonio Ciccomancini

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper a two dimensional (2D) electromagnetic Bandgap (EBG) structure is proposed for multi band noise mitigation in PWR/GND plane pairs. Excellent noise suppression (-60 dB) is achieved in multiple bands within the range 0--8 GHz with a low start frequency. Because of the 2D EBG, no additional metal layer is required. Signal Integrity analysis is also studied by modelling a microstrip to stripline transition (both single ended and differential) and by evaluating insertion loss, TDR as well as eye diagram.

Electromagnetic Radiation From Multilayer Printed Circuit Boards: A 3d Fdtd-Based Virtual Emission Predictor, Gonca Çakir, Mustafa Çakir, Levent Sevgi̇

Turkish Journal of Electrical Engineering and Computer Sciences

A novel FDTD-based virtual electromagnetic compatibility tool for the prediction of electromagnetic emissions from a multilayer printed circuit board is introduced. Tests are performed with characteristic structures and sample simulation results are presented.

New Esd Standard And Influence On Test Equipment Requirements, Nicholas Wright

Turkish Journal of Electrical Engineering and Computer Sciences

The IEC61000-4 series of standards form a basic framework for the immunity and emissions testing of electrical and electronic equipment. They are the basis for EN standards used to test CE compliance of electrical and electronic products sold within the European Union. After a period of relative stability, changes are being introduced, designed to improve reliable application of the basic standards and ensure that the same results are obtained no matter where the tests are performed. Many changes relate to the calibration procedures for the test equipment. The surge standard, IEC61000-4-5, was revised at Edition 2 to amend impulse performance …

A Subspace Projection Methodology For Nonlinear Manifold Based Face Recognition, Praveen Sankaran

Electrical & Computer Engineering Theses & Dissertations

A novel feature extraction method that utilizes nonlinear mapping from the original data space to the feature space is presented in this dissertation. Feature extraction methods aim to find compact representations of data that are easy to classify. Measurements with similar values are grouped to same category, while those with differing values are deemed to be of separate categories. For most practical systems, the meaningful features of a pattern class lie in a low dimensional nonlinear constraint region (manifold) within the high dimensional data space. A learning algorithm to model this nonlinear region and to project patterns to this feature …

Multicast Encryption Infrastructure For Security In Sensor Networks, Richard R. Brooks, Brijesh Pillai, Matthew Pirretti, Michele C. Weigle

Computer Science Faculty Publications

Designing secure sensor networks is difficult. We propose an approach that uses multicast communications and requires fewer encryptions than pairwise communications. The network is partitioned into multicast regions; each region is managed by a sensor node chosen to act as a keyserver. The keyservers solicit nodes in their neighborhood to join the local multicast tree. The keyserver generates a binary tree of keys to maintain communication within the multicast region using a shared key. Our approach supports a distributed key agreement protocol that identifies the compromised keys and supports membership changes with minimum system overhead. We evaluate the overhead of …

Precise Measurement Of The Neutron Magnetic Form Factor Gnm In The Few-Gev² Region, Clas Collaboration, J. Lachniet, H. Bagdasaryan, S. Bültmann, N. Kalantarians, G. E. Dodge, T. A. Forest, G. Gavalian, C. E. Hyde-Wright, A. Klien, S. E. Kuhn, M. R. Niroula, R. A. Niyazov, L. M. Qin, L. B. Weinstein, J. Zhang

Physics Faculty Publications

The neutron elastic magnetic form factor was extracted from quasielastic electron scattering on deuterium over the range Q² = 1.0–4.8  GeV² with the CLAS detector at Jefferson Lab. High precision was achieved with a ratio technique and a simultaneous in situ calibration of the neutron detection efficiency. Neutrons were detected with electromagnetic calorimeters and time-of-flight scintillators at two beam energies. The dipole parametrization gives a good description of the data

Mapping Reality Into Virtual Worlds, Josh Mcfarlane

Computer Science and Computer Engineering Undergraduate Honors Theses

As virtual worlds become more prevalent, they become increasingly useful as a means of information dissemination. This thesis examines the possible connections between real world objects and their virtual world counterparts. We look at how, by attaching sensors to an object, or by using a smart object with embedded sensors, the information can be relayed to a server. From this information, it will be possible to create a duplicate object in the virtual world and have it mirror the real world object in terms of state and movement. Almost all current solutions for remotely viewing a room or area are …